face used for sale

Faceplate ROTO RECORD PLV 500x8 TGL 30-22313 Outer Ø: 500 mm bolt circle Ø : 170 mm bore Ø: 135 mm n max: 560 rpm Dimensions: 500 x 500 x 165 mm

Faceplate STANKO 7103-0049 Outer Ø: 400 mm bolt circle Ø : 135 mm bore Ø: 100 mm New ! preserved ! Dimensions: 400 x 400 x 165 mm

Faceplate MEBIS P 400x8 ( P400x8 ) TGL 30-22313 Outer Ø: 400 mm bolt circle Ø : 172,5 mm height with jaws: 142 mm bore Ø: 136 mm Groove width: 14 / 25 mm groove depth: 24 mm with one-piece reversing jaws New ! preserved ! Dimensions(wooden box): 470 x 470 x 230 mm

Faceplate PAGUS Outer Ø: 295 mm bolt circle Ø : 104 mm bore Ø: 60 mm n max: 600 rpm grooves. 14 / 24 mm Dimensions: 295 x 295 x 40 mm

Faceplate PAGUS Outer Ø: 400 mm Flange: 155 mm bolt circle: 134 mm bore Ø: 110 mm height with jaws: 140 mm total height: 190 mm short cone Dimensions: 400 x 200 mm

Faceplate PAGUS Outer Ø: 360 mm bore middle Ø: 20 mm with thread flange: Ø 250 mm Bolt circle inside: Ø 135 mm bolt circle outside: Ø 225 mm bore M8 / M12 and 4 x Ø 12 mm thickness with flange: 55 mm Dimensions: 360 x 360 x 55 mm

Planscheibe ROTO RECORD PL 315x6 TGL 30-22313 Outer Ø: 315 mm bolt circle Ø : 133.5 mm bore Ø: 100 mm n max: 710 rpm New ! preserved ! Dimensions: 315 x 315 x 125 mm

faceplate diameter: 1200 mm tool adaptor: DIN 55027/11 bore: 140 mm width: 110 mm weight: ca. 800 kg Clamping disc with 6 studs. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface Grinding Machine BERGAMINI BERMI 500 Matic, capacity 500x200 mm. Automatic cycle, Max working dimensions: 500x200 mm, Longitudinal travel x axis: 505 mm, Cross travel y axis: 200 mm, Clearance between worktable and spindle axis: 350 mm, Feed rate x axis: 2-20 m/1, Feed rate y axes: 0,5 - 1 m/1, Wheel speed: 0 - 2800 rpm, Wheel dimension: 200x20x50 mm, Spindle motor power: 1,8 Kw, Weight: 1.150 Kg, Accessories: Auto cycle, dust extractor

Surface Grinding Machine CHEVALIER FSG-3A1224H, capacity 600x300 mm. Automatic cycle, Max working dimensions: 600x300 mm, Longitudinal travel x axis: 700 mm, Cross travel y axis: 305 mm, Clearance between worktable and spindle axis: 650 mm, Feed rate x axis: 2525 m/1, Feed rate y axes: 0,5 - 1 m/1, Wheel speed: 1450 rpm, Wheel dimension: 355x50x127 mm, Spindle motor power: 3,7 Kw, Weight: 2.200 Kg, Accessories: Magnetic plate, Auto cycle

Description: Clamping length 600 mm Center height 200 mm Counter spindle diameter 90 mm prepared suction weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,600 x 1,600 mm

internal diameter:300 mm grinding depth:260 mm swing diameter:500 mm spindle nose:A2-5 workhead motor:1,8 kw max. workpiece weight:50 kg work piece spindle speed:0-1000 U/min workpiece length - max.:300 mm grinding wheel speeds:20.000 1/min grinding wheel motor:3,75 kW rapid speed:8 m/min positioning accuracy:X/Y/Z: 0,001 mm repeating accuracy:X/Y/Z: 0,001 mm :3350x2250x1950 mm Weight approx.:5 t CNC controller:FANUC CNC-Steuerung 0i T Scales:Heidenhain in der X-Achse mit 0,005mm Auflösung servo spindle motor:für Werkstückantrieb 3 jaw chuck Ø:hydr. 200 mm coolant system:140 l :in deutscher Sprache spindle:Eingebaute elektrische Schleifspindel 40.000 U/min mit Zubehör ; Minimale Drehzahl: 30.000 U/min. Magnetic and paper filter :Kühlmittelsystem mit Magnetabscheider & Papierfilter 60/min, 200L

Description: 5 face head 30 tool ATC Tool length measurement Preparation for MMS-B optical type OMP60 Spindle thru coolant 5kw Chip conveyor Machine was used for very short hours after installation. Includes shipping to any major seaport in the world.  , z-motion: 660 mm, x-motion: 3,200 mm, y-motion: 1,400 mm, control: Mazatrol Smooth G, table surface area l x w : 3,000 x 1,250 mm, taper: MAS BT 50, toolchanger positions: 30, turning speed range: 10,000 rpm, rapid motion: 32 x 40 x 30 m/min, total power requirement: 30 kW, weight approx.: 27,168 kg, Approx. Onsite Dimension. (l x w x h): 8,970 x 3,864 x 4,900 mm

Key data: 1400 mm, 1300 mm, 900 1/min

New price was 110,000 € (200,000 DM) Heavy Duty Lathe Lathe Est Ticino ET-CC 650 Manufacturer: Est Ticino Type: ET-CC 650 Year of construction: 1995 Main motor Siemens: 37kW Control: Siemens (drives), Fagor (display), Omron (PLC) Weight: 9.4t Specifications: Center height 655 mm Center width 1500 mm Maximum turning length 1300 mm Turning diameter over bed 1400 mm Turning diameter via face slide 1050 mm Turning diameter bridge 1400 mm Width of bridge 500 mm Spindle bore 160 mm Spindle speed 3 steps Spindle speed 3 – 900 rpm. Maximum torque 1100 KGM Bed width with double prism 600 mm Bed width with 3rd additional guide 820 mm Length of bed carriage guides 930 mm Width of face slide 420mm Path slide 800 mm Width of the rotatable upper slide 270 mm Travel of the rotating upper slide 400 mm Rapid traverses longitudinal 6 mt./min. Rapid traverses plan 6 mt. ...

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Forehead dimension: Ø 65 mm -Quantity: 9x centering tips available -Price per piece -Recording: see photos -Dimensions total: Ø 74 x 220 mm -Weight: 2.9 kg/pc.

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver -Type: MS6 -Forehead dimension: Ø 90 mm -Recording: see photos -Dimensions total: Ø 110 x 315 mm -Weight: 8.5 kg

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Forehead dimension: Ø 63 mm -Recording: see photos -Dimensions total: Ø 80 x 235 mm -Weight: 3.5 kg

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minPalett changer with2 PalletMovement X / Y / Z560/560/660 mmMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)3,1 x 4,86 x 2,84 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWWeight approx.11100 Kg(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

diameter: 315 - 700 mm bore: 60 - 155 mm Various used face plates: Face plate 7 = 500 mm, short taper Din 55027 Gr. 8 = € 530.00 Face plate 9 = 550 mm, short taper Din 55027 Gr. 8 = € 510.00 Face plate 11 = 400 mm, short taper Din 55027 Gr. 6 = € 360.00 Face plate 13 = 400 mm, short taper Din 55027 Gr. 6 = € 320.00 Jaws can only be adjusted individually via threaded spindles. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 400 - 550 mm bore: 90 - 95 mm Various used face plates: Face plate 1 = 500 mm, short taper Din 55027 Gr. 8 = € 530.00 Face plate 2 = 550 mm, short taper Din 55027 Gr. 8 = € 530.00 Face plate 3 Röhm = 400 mm, short taper Din 55027 Gr. 6 = € 470.00 Face plate 4 = 315 mm, short taper Din 55027 Gr. 6 = € 260.00 Jaws can only be adjusted individually via threaded spindles. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. machining part length 15000 mm Max. diameter over bed 3700 mm Max. diameter over turning support 3000 mm Distance between centers axis and bed guideways 1940 mm Max. load of machining part fixed between centers 150000 Kg Max. load of machining part fixed in face plate : on first step of clamping jaw 75000 Kg on second step of clamping jaw 50000 Kg Max. load of machining part fixed in face plate and steady rest: 150000 Kg on first step of clamping jaw 155000 Kg on second step of clamping jaw 130000 Kg Face plate diameter 3050 mm Clamping diameter on first step of clamping jaw without extension 400 - 1700 mm with extension 260 - 400 mm Clamping diameter on second step of clamping jaw 1200-2500 mm Clamping force of one hydraulic clamping jaw 35000 daN Power of main drive motor 125 Kw Face plate speed range (on 4 steps) 0.5 - 120 rpm Max. main shaft torque (for 5.6  ...

Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one clamping. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Automatic loading system HS # 172 (workpiece weight up to 5 kg, stack height up to 180 mm),, Automatic set-up of the machine (automatic saw infeed axis, saw stop for diameter control, audio probe Measuring device for automatic probing, etc.),, Standard software package for tooth geometries after tooth shape summary,, Software for grinding saw blades with group teeth, with different tooth geometries,, Software for replaced and broken teeth,, Data entry station for the sawblade data, with touchpanel,, Device for internal coolant supply using oil,, Coolant collecting pan including grids for the machine,, Coolant co ...

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

Double Column Machining Center TOSHIBA MPC-3180B Table mm.8000 x 2700 Distance between columns mm.3100 X mm.9000 Y mm.3900 Z Verticaal RAM stroke mm.900 W Vertical Crossrail stroke mm.1600 Automatic indexed every 5 degrees 5 face head Distance table to spindle nose mm.2440 Table load Kg. 20.000 Spindle speed 5-3000 rpm 2 ranges Spindle taper BT 50 Ram section 380 x 380 Machine dimensions mm.29110 x 9900 x 7260 Machine weight Kg. 151.000 Year 2007 Standard options : 5-face cutter head Automatic attachment (5-face cutter head or other attachments)index (AAI) (4-position index by 90.) Automatic tool loading/unloading device for vertical spindle and horizontal spindle) CNC controller including standard and pack specifications Pendant operation box with electrically-driven free arm Hydraulic unit Oil cooling unit (AKZ 908) Hydraulic crossrail servo balancing s ...

Machine dimensions 15000x4000 mm Bed width 4300 mm Bed height 800 mm Machine weight 300000 Kg Max. load of a machining part fixed between centers without steady rests 150000 Kg Max. load of a machining part fixed between face plate and steady rests 300000 Kg Max. machining diameter 3700 mm Min. machining diameter 300 mm Face plate diameter 2700 mm Max. machining part length 15000 mm Distance between quill and bed guideways 1900 mm Face plate speed range (on 4 steps) 0.315-100 rpm Max. rotation face plate torque 30000 daNm Max. torque to stress between jaws for max. load of 150000 Kg 70000 daNm Turning support (4 tool holders) : Max. turning force 30000 daN Cross travel (ball screw) 1400 mm Cutting blade max. length 1020 mm Working feed range (longit. and tr ...

Machine dimensions 15000x4000 mm Bed width 4300 mm Bed height 800 mm Machine weight 300000 Kg Max. load of a machining part fixed between centers without steady rests 150000 Kg Max. load of a machining part fixed between face plate and steady rests 300000 Kg Max. machining diameter 3700 mm Min. machining diameter 300 mm Face plate diameter 2700 mm Max. machining part length 15000 mm Distance between quill and bed guideways 1900 mm Face plate speed range (on 4 steps) 0.315-100 rpm Max. rotation face plate torque 30000 daNm Max. torque to stress between jaws for max. load of 150000 Kg 70000 daNm Turning support (4 tool holders) : Max. turning force 30000 daN Cross travel (ball screw) 1400 mm Cutting blade max. length 1020 mm Working feed range (longit. and transv.) 0.1-4000 mm/min Rapid feed range (longit. and transv.) 5000 mm/min Tool holder dimensions 120x60x35 mm Ta ...

Suitable to sharpen automatically the face and top on carbide tipped circular saw blades in one, set-up. The complete machining hook angle, clearance angle, top and blade body in one single clamping Accessories:, Total enclosure,, Coolant system,, Automatic fire extinguishing device,, Alphanumeric plug-in keyboard for data management,, Machine light,, Extractor,, Measuring probe,, Saw diameter: 80-840mm, Bore diameter: from 10 mm, bore diameter: from 10 mm, sheet thickness:

This machine can be considered as an ultimate solution for the production of concrete elements providing the one to choose numerous options as an additional upgrade to the machine that can make production even more efficient: Filling box on servo drives Filling boxes both from the coarse mix and face mix powered with 2 servo motors create fast movement back and forth contributing reliable filling of the mould. As for the coarse mix device filling box it is additionally equipped with an agitator (driven by the hydraulic cylinder) for equal and fast filling. Servo vibration Hi-dynamic Servo vibration system transmits power for the high compaction with the just right consumption of electrical power to vibration table consisted of impact and ledge bars and thus providing top-quality paving stones, blocks, curbstones as well as any other products which modern demanding market requires ...

Doka Alu Framax 127 m2 Good condition of frame and formwork skin (partly new Finply formwork skin or used X-Life formwork skin) Due to its lower weight, the aluminium frame formwork is suitable for shelling with and without a crane. Also seamless in combination with Framax steel formwork suitable. Lightweight and versatile due to sturdy profile frame made of aluminium Reduced workload when shelling by hand due to low element weight, with a high load capacity of 60 kN/m² can be implemented by hand or by crane thanks to frames made of torsion-resistant aluminium hollow sections Division into crane and hand formwork areas 20 x Element 0,90x2,70m 20 x Element 0,75x2,70m 14 x Element 0,60x2,70m 6 x Element 0,45x2,70m 6 x Element 0,30x2,70m 2 x Outer corner 2,70m 2 x Inner corner 2,70m Partial quantities are also possible! Doka Alu Framax 127 m2 Good condition ...

Machine type: welding rotary table Make: Merkle / Conzelmann Type CD 50/25 - 320 Connection voltage 1 x 230 V Speed range 0.25 – 2.5 rpm, infinitely variable Speed control 1 : 10 Torque 2.5 – 10 Nm Face plate diameter 250 mm Face plates - internal passage 10 mm Tilt angle of the face plate 135° Vertical load capacity 0.5 kN = 50 kg Table height 320 mm Tilting movement manual, clampable Tipping torque 90 Nm Pantograph 400 A 80 % d.c. Connection for - foot switch simple - Double foot switch - Foot remote control Age 3 years Condition: as good as new Weight 44 kg Warranty 24 months from the date of delivery Original price €2,198.00 + VAT Offer price €1,690.00 + VAT Foot switch simple with 3 mtr. cable 239.00 € + VAT 019.0.2900 Double foot switch with 3 mtr. cable 389.00 € + VAT 019.0.2901 Foot remote c ...

Manufacturer: Wagner (SMS MEER) Type: SP 1ZO 1000 YOM: Revamped 2006 and 2019 REVAMP REPORT 2019 3.2. Mechanical works 3.2.1. Supplies and Achievements Supply and machining of 4 guiding columns • Material 42CD4V + CPCU 3.1, 0330 x length 6300 from raw forged, treated, dress and owned • Central threads and external thread • The centering bearings will be pre-machined to a rough dimension and finished according to diameters obtained aer retouching on the lower windchest and the upper yoke. Refurbishment of the lower bedstead: • Cast steel • Weight of 10,600 Kg and dimensions of 3500 x 3174 • 1050 Mounng on boring machine with balancing and geometric and dimensional checks • Retouching of the 4 lines of bores with 0330/332 (Rework of a maximum of 1mm/rays) • Dressage of inferiors and superiors • Retouching of 2 sides with 0340H7 and Ø330H7 (mini) • Retouchin ...

grinding diameter: 360 mm grinding length: 1600 mm centre height: 180 mm internal diameter: 0 mm grinding depth: 0 mm swing diameter: 0 mm total power requirement: 40 kW weight of the machine ca.: 10000 kg dimensions of the machine ca.: m K A R S T E N S (Germany) Universal CNC” - Cylindrical Internal and Face Grinding Machine also for grinding excentric and cam profiles and polygons and even suitable for Threadgrinding Model K 51 – 1500 Year 2000 Serial No. 99 093 Height of centres 180 mm Distance between centres / grinding length 1,700/1.600 mm Cylindrical Grinding: Grinding Ø, approx. 5 - 360 mm Grinding wheel: Ø x width x bore 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s) 1.900 / 2.200 rpm Drives of cyl./int/face spindle units 7.5/4,0/7,5 kW Grinding Wheelhead: 3  ...

rotary table diameter: 1000 mm grinding height: 500 mm grinding head - power requirement: 15/5,5 kW total power requirement: 30 kW weight of the machine ca.: 18 t dimensions of the machine ca.: m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _______________________________________________________ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx.  ...

max. wheel diameter: 1600 mm gear width: 457 mm max. module: 12,5 min. module: 2 spindle bore: 222 mm stroke: 15-120 Hub/min roll feed: 0.3 - 0.84 mm/min down feeds: mm/Hub electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 10 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 3,5 x 3,3 x 2,5 m EXTERNAL GEARS: Blank diameter:- Max 63 1600 mm Min 0 0 Face width, double helical 0 - 18 0 - 457 mm Face width, spur or single helical 0 - 10 0 - 254 mm INTERNAL GEARS: Blank diameter:- Max 66 1676 mm Face width 0 - 8 0 - 203 mm P.C.D.:- Max 66- (2 x rim thickness) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Waldrich Siegen CNC lathe for heavy machining Details Conversion to CNC 2006 Center distance 22,000 mm Maximum turning length Support 1: 20,000 mm Maximum turning length Support 2: 20,500 mm Largest turning diameter over support 1,600 mm Largest turning diameter above bed 2,000 mm Workpiece weight max. 70,000 kg Face plate diameter 2,000 mm Face plate speed, infinitely variable in 4 steps 1.2 - 75 rpm. Maximum torque at speed 5.65: 170,000 Nm Main motor 110 kW Largest clamping diameter on headstock ⌀ 920 mm Mounting in roller block (passable) 2 pieces 600 - 1290 mm Mounting in bezels (passable) 100 - 775 mm Control system Siemens SINUMERIK 840D Support 1 and 2 (to headstock) Displacement of the upper support 550 mm Displacement of the slider 400 mm Quick longitudinal adjustment (rapid traverse) 3,000 mm/min Q ...

Key data: 820 mm, 2000 mm, 515 mm

We offer an exceptionally good precision lathe here. The machine is probably the best German lathe that has been built in this class. BOEHRINGER Precision Lathe Model DUE 800 Year of construction: 1984 Ma.-No.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter via face slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar clearance: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Max. torque: 6300 Nm 24 speeds: 7.1 – 1400 rpm. 60 face feeds: 0.05 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Trustock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital display HEIDENHAIN coolant device; Chip protection rear wall, power chuck Autoblock 500 mm with clamping jaws ...

Lathe Böhringer VDF with programmable cycles Type DUS 560 Machine No. 1022.3073-03 Built in 1993 Center width 2000 mm Connected load 19 kW Working Range/Dimensions Circulation diameter over bed 570 mm Circulation diameter via face slide 365 mm Sliding distance of the face slide 345 mm Displacement of the upper support 125 mm Center height over flat track 280 mm Bed width 360 mm Bed carriage guide length 520 mm Slide width 225 mm Slide length 680 mm Upper support width 140 mm Turning bit cross-section according to DIN 770 hxw 32x25 mm Main spindle Spindle head according to DIN 55 027 size 8 Spindle diameter in front bearing diameter 100 mm Spindle bore diameter 62 mm Inner cone of the main spindle 70 metr. Main drive Infinitely variable three-phase motor (AC motor) Drive power 60 % / 100 % ED 19/15 kW Torque 60 % / 100 % ED 1800/1400 Nm Total speed range  ...

Key data: 570 mm, 1000 mm

Weiler E50/1 - CNC lathe - 4-jaw face plate Ø 550 mm - 3-jaw lathe chuck Ø 310 mm incl. 4 sets of hard base jaws, 1 set of hard top jaws, 5 sets of soft top jaws - fixed bezel - Moving center punch tip MK5 - Mulifix B quick-change holder incl. 10 attachments - Switch-on time 32582 h - Built in 1997 - incl. operating instructions and technical documentation Specification Workspace: - Center width: 1000 mm - Center height: 280 mm - Circulation diameter over bed: 570 mm - Circulation diameter via face slide: 340 mm - Circulation diameter in the recess: 600 mm - Bed width: 350 mm - Sliding distance of the face slider: 340 mm - Displacement of the upper support: 140 mm - Slide length: 700 mm - Slide width: 220 mm - Bed slide guide length: 560 mm - Turning chisel cross-section (height/width): 32 x 25 mm Fulcrum shaft: - Spindle head according to DIN 55027: Gr 8  ...

turning diameter: 360 mm turning length: 1000 mm turning dia. over face-slide: 220 mm spindle bore: 38 mm metrical thread cutting: 0,4 - 7 mm threading WHITWORTH: 4 - 56 TPI tailstock travel: 110 mm face slide travel: 170 mm upper slide-adjustment: 165 mm longitudinal feeds:: 0,067 - 1,485 mm : 40 spindle turning speed - stepless: 30 - 2200 (2) U/min : 515 mm diameter of quill: 45 mm face feeds: 0,033 - 0,742 mm total power requirement: 2,5 kW weight of the machine ca.: 750 kg dimensions of the machine ca.: 1920 x 740 x 1194 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...

Machine type welding rotary table Brand MERKLE Type D 150 touch Supply voltage 1 x 230 V Speed range 0.05 – 10 rpm, infinitely variable Speed control 1 : 200 Torque 15 – 50 Nm Face plate diameter 400 mm Face plates - inner passage 60 mm Tilt angle of the face plate 135° Vertical load capacity 150 kg/1.5 kN Table height 750 mm Tilting movement manual, clampable and snap-in Tipping torque 130 Nm Pantograph 400 A at 80 % ED Connection for - foot switch single or double - Handheld remote control - Foot remote control Age 6 months Condition as good as new Weight 65 kg Warranty 24 months from date of delivery List factory price ex stock 3.550,00 € + VAT incl. surcharges Price kpl. ex warehouse Munich 2.890,00 € + VAT Foot switch simple with 3 mtr. cable 225,00 € + VAT 019.0.2900 Foot switch double with 3 mtr.  ...

Offer 21270 Technical data approx.: - max. load capacity approx. 2000 kg - Face plate diameter 1500 mm - Hydraulically swivelling face plate - Rotary movement electric with right - + counterclockwise rotation - hydr. Height adjustment of the face plate - min./ max. table height in horizontal position -ca. 870 / 1940 mm - Drive 400 V - Space requirement approx. W 3000 x H 870 x D 1750 mm - Weight approx. 2500 kg

Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

faceplate diameter: 3.000 mm swing diameter: 3.200 mm turning height: 2.200 mm Control: 840 D ShopTurn Siemens cross rail adjustment: 1.500 mm tool travel: 1.250 mm faceplate turning speed range: 0 - 120 U/min power capacity: 75 kW Driven Tool Stations:: speeds: 10 - 3.000 U/min output: 22 kW max. Torque: 320 Nm tool adaptor: HSK 160 (VDI 60) tool magazin:: number of toolpositions: 16 pos. weight of tools max.: 25 kg total power requirement: - kW weight of the machine ca.: 36 t dimensions of the machine ca.: 6,0 x 6,0 x 3,5 m Chip conveyor: Coolantsystem: C-axis: 0,001° hydraulic system: Tool Magazine: 16 pos. tool holders: div. Vertical Turning Machine KONRAD SEIDLER - Vertimaxx 3000 - including clamping material, various tool holders - 1x angle bore and milling head 90° Drive spindle according to SEIDLER HSK 160B Output spindle ABS 63 Gear ratio i 1:1 Max. speed 2300 rpm (co ...

Cutter head, milling holder, carbide milling cutter, indexable insert milling cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Handover in current condition as seen -Condition see pictures -Manufacturer: Sandvik Coromant, face milling cutter head shell milling cutter Ø 113 mm -Type: R260.22-100Q32-12H -Intake: SK50 -Dimensions: Ø 113 x 225 mm -Weight: 5.5 kg

SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...

The U2PRW mitre and drill is designed for processing slats and furniture fronts made of solid wood or MDF. The machine tool operates in a semi-automatic cycle. During one cycle, the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in a jammed plane or edge of the element. – made in Poland TECHNICAL PARAMETERS: Max. height of the material to be cut: 60 mm Max. width of the material to be cut at an angle of 45° 70 mm Max. material width at 90° 150 mm Max. length of cut material 2200 mm Min. length of cut material at 45° 455 mm main saw diameter 250 or 300 mm scoring diameter 100 mm Max. bottom cutter diameter 35 mm Max. bottom milling depth 15 mm seating diameter of face drills and bottom milling cutter 10 mm Drill head (face drilling): 4 spindles spindle axial spacing 32 ; 32 ; 40 mm Linear spindle system Max. face d ...

Key data: 5000 mm, 4000 mm, 22000 mm

Flat top lathe with plate frame (heavy duty lathe) - Machine was overhauled in Italy in 2014 and stored directly - new electrics (control cabinet, cabling) - Max. turning diameter over the bed carriage 4000 mm - Max. turning diameter 5000 mm - Max. turning length: 22000 mm - Face plates speed range 0.9 - 56 1/min - Face plate diameter 4420 mm - Main motor power 30 kW - Max. torque at face plate 61803 Nm - Max. workpiece weight between tips: 20 t - Max. workpiece weight flying: 12.5 t -two bed slides with 4500 mm swivel length - complete with panel panels - a roller trestle - a tailstock After the overhaul, the lathe was no longer put into operation, but stored directly. The machine is dismantled and stored dry in a hall near Hamburg. The machine can be viewed by appointment. The machine is loaded free of charge with an indoor cran ...