face to face used for sale

Faceplate PAGUS Outer Ø: 400 mm Flange: 155 mm bolt circle: 134 mm bore Ø: 110 mm height with jaws: 140 mm total height: 190 mm short cone Dimensions: 400 x 200 mm

Faceplate PAGUS Outer Ø: 360 mm bore middle Ø: 20 mm with thread flange: Ø 250 mm Bolt circle inside: Ø 135 mm bolt circle outside: Ø 225 mm bore M8 / M12 and 4 x Ø 12 mm thickness with flange: 55 mm Dimensions: 360 x 360 x 55 mm

Planscheibe ROTO RECORD PL 315x6 TGL 30-22313 Outer Ø: 315 mm bolt circle Ø : 133.5 mm bore Ø: 100 mm n max: 710 rpm New ! preserved ! Dimensions: 315 x 315 x 125 mm

faceplate diameter: 1200 mm tool adaptor: DIN 55027/11 bore: 140 mm width: 110 mm weight: ca. 800 kg Clamping disc with 6 studs. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface Grinding Machine BERGAMINI BERMI 500 Matic, capacity 500x200 mm. Automatic cycle, Max working dimensions: 500x200 mm, Longitudinal travel x axis: 505 mm, Cross travel y axis: 200 mm, Clearance between worktable and spindle axis: 350 mm, Feed rate x axis: 2-20 m/1, Feed rate y axes: 0,5 - 1 m/1, Wheel speed: 0 - 2800 rpm, Wheel dimension: 200x20x50 mm, Spindle motor power: 1,8 Kw, Weight: 1.150 Kg, Accessories: Auto cycle, dust extractor

Surface Grinding Machine CHEVALIER FSG-3A1224H, capacity 600x300 mm. Automatic cycle, Max working dimensions: 600x300 mm, Longitudinal travel x axis: 700 mm, Cross travel y axis: 305 mm, Clearance between worktable and spindle axis: 650 mm, Feed rate x axis: 2525 m/1, Feed rate y axes: 0,5 - 1 m/1, Wheel speed: 1450 rpm, Wheel dimension: 355x50x127 mm, Spindle motor power: 3,7 Kw, Weight: 2.200 Kg, Accessories: Magnetic plate, Auto cycle

diameter:310 mm weight of the machine ca.:0,03 t bore:65 mm

faceplate diameter:450 mm weight of the machine ca.:0,15 t dimensions of the machine ca.:0,5 x 0,5 x 0,2 m Bore:130 mm

faceplate diameter:620 mm weight of the machine ca.:0,15 t Bore:130 mm

faceplate diameter:500 mm weight of the machine ca.:0,1 t 4-jaw faceplate for studs and locknut

faceplate diameter:400 mm weight of the machine ca.:60 kg

total power requirement:16,5 kW weight of the machine ca.:3,8 t

Description: Clamping length 600 mm Center height 200 mm Counter spindle diameter 90 mm prepared suction weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,600 x 1,600 mm

internal diameter:300 mm grinding depth:260 mm swing diameter:500 mm spindle nose:A2-5 workhead motor:1,8 kw max. workpiece weight:50 kg work piece spindle speed:0-1000 U/min workpiece length - max.:300 mm grinding wheel speeds:20.000 1/min grinding wheel motor:3,75 kW rapid speed:8 m/min positioning accuracy:X/Y/Z: 0,001 mm repeating accuracy:X/Y/Z: 0,001 mm :3350x2250x1950 mm Weight approx.:5 t CNC controller:FANUC CNC-Steuerung 0i T Scales:Heidenhain in der X-Achse mit 0,005mm Auflösung servo spindle motor:für Werkstückantrieb 3 jaw chuck Ø:hydr. 200 mm coolant system:140 l :in deutscher Sprache spindle:Eingebaute elektrische Schleifspindel 40.000 U/min mit Zubehör ; Minimale Drehzahl: 30.000 U/min. Magnetic and paper filter :Kühlmittelsystem mit Magnetabscheider & Papierfilter 60/min, 200L

Energy chain including covers, closed, can be opened. Black dimensions 75 x 55. Unused mint condition! 10 mtr. present a ´ mtr. 29.-NET Very high quality see photos! 0170 / 2204056 Info Mail fa.raupp@t-online

Warehouse No. : G15887 Machine type : Toolbox / Transport box Make: - Type : - Year of construction : - Technical data Dimensions 1500 x 900 x 890 mm Weight approx. 200 kg 2 compartments inside 200 x 200 x 750 mm each Wall thickness approx. 4 mm stable heavy toolbox for transport or assembly

Turning head, spindle tool, boring tool, boring tool, boring rod type 040.084S0012 Tool holder: SK40 - DIN 69871 Boring rod diameter: 70 mm Machining diameter: 75-120 mm Tool insert: triangle 10.5 mm - Tool on the pictures set to approx. 108 mm Machining depth: max. 200 mm Tool Total length: 300 mm Net weight: 6.5 kg Used, but good condition; used

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, tool box -Tool box: with non-sparking tools -Content: see photos -Dimensions: 430/200/H230 mm -Weight: 28kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Recording: 25 mm -Drawing: in the photos -Dimension: 40 x 130 mm -Length: 495 mm -Weight: 12.5 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Thickness: 25/18 mm -Total length: 138 mm -Total height: 70 mm -Weight: 4 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Thickness: 25 mm -Total length: 470 mm -Total height: 195 mm -Weight: 18 kg

Clinching Unit TOX - Pneumatic-Hydro Tox Press Hydro-Pneumatic Press TOX Pressotechnik POWER PACKAGE Type CRS 03.62 Item no.: 207599.2 Year of construction approx. 2005 Pressure capacity: max. 80 kN = 8 ton Projection: 20 mm Installation height: 32 mm - built-in clinching tool - pneumatic valve for actuation - penetrating joining or clinching - To create a positive connection of 2 sheets without perforating or heating the sheets- mounted on the stand - Sold without electrical control Weight: 230 kg Comes from a production plant, sold without electrical control Delivery of a simplest electrical control , triggering via foot switch + 400,-- EUR net several TOX clinch units available; used

Clinching Unit TOX - Pneumatic-Hydro Tox Press Hydro-Pneumatic Press TOX Pressotechnik POWER PACKAGE Type: K.8.155.40.10 Item no.: 222780.10 Year of construction approx. 2005 Pressure capacity: max. 80 kN = 8 ton. Projection: 85 mm Installation height: 37 mm - Pneumatic valve for actuation - Through-joining or clinching - For creating a positive connection of 2 sheets without perforating or heating the sheets- Mounted on the stand- with the simplest electrical control, triggered by foot switch Weight: 180 kg Comes from a production plant, sold without electrical control / Sold with the simplest electrical control several TOX clinch units available; used

Lista Drawer Cabinet with Milling Tool Lista Drawer Cabinet Number of drawers: 13 Pull-out type: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Body colour: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 870 x 725 x 1450 mm Content: Metal Circular Saw Blades Cross-toothed and coupled disc milling cutters Cross-toothed disc milling cutter Angle semi-circular cutter Dovetail cutter Semi-circular milling cutter Thread milling cutters More items - new and used - can be found in our shop! International shipping costs on request!

Lista Drawer Cabinet with Milling Tool Lista Drawer Cabinet Number of drawers: 13 Pull-out type: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Body colour: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 870 x 725 x 1450 mm Content: Metal Circular Saw Blades Cross-toothed and coupled disc milling cutters Cross-toothed disc milling cutter Angle semi-circular cutter Dovetail cutter Semi-circular milling cutter Thread milling cutters More items - new and used - can be found in our shop! International shipping costs on request!

Lista Drawer Cabinet with Milling Tool Lista Drawer Cabinet Number of drawers: 13 Pull-out type: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Body colour: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 870 x 725 x 1450 mm Content: Metal Circular Saw Blades Cross-toothed and coupled disc milling cutters Cross-toothed disc milling cutter Angle semi-circular cutter Dovetail cutter Semi-circular milling cutter Thread milling cutters More items - new and used - can be found in our shop! International shipping costs on request!

Driven Tool, Driven Tool Holder for CNC Lathe BIGLIA fits 100% on a B 501 Y Manufacturer OESTERLE Partner Art.-No. 310 5521 E32 B109 Year of manufacture: approx. 2010 Serial No. 06 - 12 / 0330 Collet holder: ER32 - with a collet 18 mm Weight: 7.5 kg very good condition similar to M.T. ITALY; used

Tool trolley with drawers and tool set HBM MACHINES GREYLINE article number: 9404 width ( without handle ): 800 mm depth: 460 mm height: 820 mm ( without castors ) Material: sheet steel 6 drawers: width: 540 mm, depth: 400 mm, height: 70 mm drawers with 245-piece tool set 1 drawer: width: 540 mm, depth: 400 mm, height: 200 mm drawer is damaged ! left side with perforated wall, right side with storage compartment with door further damage to the handle and the upper shelf 2x swivel castors with parking brake, 2x fixed castors used, tested ! Tool set as good as new ! Dimensions: 880 x 500 x 970 mm

Description: With 8 drawers  , Contents , Pillar and guide sleeves for tools, , Thread plugs, , Ejector rods, Mounting material, , Twist drill Approx. Onsite Dimension. (l x w x h): 710 x 700 x 1,000 mm, weight approx.: 380 kg

Description: amount 2 pieces Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 10 kg

Description: With 9 tool holder inserts Tool holders mostly equipped with tools weight approx.: 280 kg, Approx. Onsite Dimension. (l x w x h): 630 x 620 x 2,000 mm

With a long-dwell, continuous-flow, transverse-sealing system, the Tornado LD reaches packaging speeds of up to 100 packages per minute while delivering hermetical seals. The cantilevered construction houses the mechanical and electrical components at the rear of the machine in separate and protected areas. The sealing units and conveyor surfaces are housed at the front. The machine face is therefore free from obstacles and can easily be cleaned, preventing production waste from coming into contact with mechanical and electrical parts. The Tornado LD brings high performance levels, reduced maintenance, and is built with top-quality materials and components. These machines are built to last. Power supply: 3x400V Power: 3.5 kW Production year: 1998

Article is original packed

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

Second-hand tool trolleys including tools as well as additional storage compartments

Torque wrench, torque tool -Recording: 1/2 inch -Torque: 5-25 kpm -Dimensions: 480/220/H110 mm -Weight: 6.4 kg

Sheet metal storage tower, 26 compartments, Stopa, format 2500x1250mm – second-hand - : Price from location: 24.500.-€ (net), plus dismantling etc.! Manufacturer: Stopa Type: Tower Year of construction: 1996 Space Requirements: Width: 4200mm, Tower depth: 3950, with carriage outside: 5600mm or more depending on rail length Height: 6725mm Load capacity per cassette: 3,000kg Storage locations: 26 Storage capacity: 78 tons. Sheet size: 1,250 x 2,500mm Condition: good, has been serviced annually by Stopa Available: Dismantling: week 30 2024, Location: Switzerland, 1950 Sion For dismantling: 3T indoor crane and 4T forklift are available free of charge (without driver, who must have a valid driver's license for these machines).

This Bench Top Press from Craver is in machine storage at Plastima Used Machinery. The machine is from 1994 and is in good condition – Brand: Carver – Model: 3393-682 – Year built: 1994

Control machine, monitor, control tool master -Manufacturer: Wieder, Monitor Tool Master TM -Type: WPC-ES-486, (133-1.2-L-9.4-T) -Dimension: 300/160/H215 mm -Weight: 6.7 kg

Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 80-400 Nm -Art.No.: 4440-01 -Torque: 80 - 400 Nm / 60 - 300 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 755/70/H65 mm -Weight: 2.1 kg

Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 40-200 Nm -Art.No.: 4420-01 -Torque: 40 - 200 Nm / 30 - 150 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 560/60/H60 mm -Weight: 1.3 kg

Shipping within Germany 8.- insured

Ref.Nr. 00799 Name of the system Tool presetter Manufacturer: PWB Swiss, CH-9450 Altstätten Model Tool Master 10 Year of construction 2012

MSC, MULTIVAC, Terminal-T, Tochscreen

Description: With digital display and an SK 40 adapter Approx. Onsite Dimension. (l x w x h): 550 x 400 x 700 mm, weight approx.: 70 kg

Height adjustable

Description: Serial number 516019 , Permissible operating overpressure 10 bar flow rate: 1060 Liter pro Minute, suction capacity: 7,5 kW, Approx. Onsite Dimension. (l x w x h): 600 x 500 x 1,000 mm, weight approx.: 100 kg

Year of production: 1986 Serial number: 50 166 N and the machine was overhauled in 2003 with modernization of electrical control. The machine was equipped with a new SIEMENS automatic controller and new SIEMENS drives. GENERAL CHARACTERISTICS OF THE MACHINE The basic feature of the machine is a fixed portal, a sliding table. The portal has a height-adjustable crossbar, which is equipped with one or two vertical headstocks in the VFS 160 design. Furthermore, the portal is equipped with one or two side (horizontal) VFS 160 headstocks. These types of headstocks can be fitted with additional spindle heads, up to 4 pieces available. The clamping surface of the machine consists of two connected clamping tables, which after disconnection can be used individually (only one is always functional). Clamping table Dimensions of 1 table 2 2,000 x 4,000 mm Total length of connect ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 190 mm Distance between centres: 750 mm Swing over cross-slide: 240 mm Swing over bed: 390 mm Swing in gap: 580 mm Spindle hole: 54 mm Taper in spindelstock MK: 4 Taper in spindle: Camlock: 6" D1 Spindle speeds: number (steps): 16 from: 25 rpm up to: 2000 rpm Taper in tailstock:: 4 MT Spindle stroke: 155 mm Feeds: length: from: 0.04 mm/r up to: 1 mm/r Frontal: from: 0.02 mm/r up to: 0.5 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 7.5 HP Machine´s weight about: 1170 kg Overall dimensions machine: Length: 2000 mm Width: 1000 mm Height: 1500 mm Various accessories: Digital readout number of axis: Manufacturer: HEIDENHAIN Face plate diameter: 380 mm 3-jaw chuck diameter: 200 mm Set of jaws hard Set of jaws Coolant system Quick closing attachment Chuck adaptor Fixed s ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 260 mm Distance between centres: 2000 mm Swing over cross-slide: 340 mm Swing over bed: 520 mm Swing in gap: 620 mm Length of the gap: 145 mm Workpiece weight on centres max.: 760 kg Spindle hole: 42 mm Taper in spindelstock metric: 50 Taper in spindle: Camlock: D6" Spindle speeds: number (steps): 13 from: 20 rpm up to: 1800 rpm Pitch of leadscrew: 6 mm Steep thread transmission: 6:1 Taper in tailstock:: 5 MT Spindle diameter: 80 mm Spindle stroke: 200 mm Feeds: length: from: 0.045 mm/r up to: 2.52 mm/r Frontal: from: 0.003 mm/r up to: 1.75 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 HP Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3740 mm Width: 1300 mm Height: 1600 mm Various accessories: Face plate diameter: 550 mm 3-jaw chuck diameter ...