face lathe used for sale

faceplate diameter: 1200 mm tool adaptor: DIN 55027/11 bore: 140 mm width: 110 mm weight: ca. 800 kg Clamping disc with 6 studs. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Face milling cutter, slip-on milling cutter, milling head GARANT 21380-160 SK50 Diameter: 160 mm Number of cutting edges: 9 Diameter base body : 180 mm Height: 50 mm with HAIMER 50 milling mandrel.350.40 Ø 40 x 50 used, tested ! Dimensions ( cutter ): Ø 180 x 215 mm

Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Face plate: chuck size Ø 500 mm -Receptacle: short cone 8 (Ø 136-139 mm) -Hole circle: Ø 172 mm -Through hole: Ø 80 mm -Groove width: 20 mm -Weight: 86 kg

Face plate, clamping plate PAGUS external Ø: 180 mm height: 32 mm bore: Ø 16 mm, depth: 32 mm Groove width: 8 / 18 mm Groove length: 65 mm Groove depth: 16 mm flange: Ø 130 / 102 mm bolt circle diameter: Ø 115 mm 3x threaded hole: M8 x 1.25, depth: 20 mm used, tested ! dimensions: 180 x 180 x 32 mm

Surface Grinding Machine BERGAMINI BERMI 500 Matic, capacity 500x200 mm. Automatic cycle, Max working dimensions: 500x200 mm, Longitudinal travel x axis: 505 mm, Cross travel y axis: 200 mm, Clearance between worktable and spindle axis: 350 mm, Feed rate x axis: 2-20 m/1, Feed rate y axes: 0,5 - 1 m/1, Wheel speed: 0 - 2800 rpm, Wheel dimension: 200x20x50 mm, Spindle motor power: 1,8 Kw, Weight: 1.150 Kg, Accessories: Auto cycle, dust extractor

Surface Grinding Machine CHEVALIER FSG-3A1224H, capacity 600x300 mm. Automatic cycle, Max working dimensions: 600x300 mm, Longitudinal travel x axis: 700 mm, Cross travel y axis: 305 mm, Clearance between worktable and spindle axis: 650 mm, Feed rate x axis: 2525 m/1, Feed rate y axes: 0,5 - 1 m/1, Wheel speed: 1450 rpm, Wheel dimension: 355x50x127 mm, Spindle motor power: 3,7 Kw, Weight: 2.200 Kg, Accessories: Magnetic plate, Auto cycle

Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Face plate: Chuck size Ø 560 mm -Bolt circle: Ø 235 mm -Groove width: 23 mm -Through hole: Ø 140 mm -Intake: short taper 11 -Weight: 109 kg

Description: Clamping length 600 mm Center height 200 mm Counter spindle diameter 90 mm prepared suction weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,600 x 1,600 mm

Description: control: SIEMENS Sinumerik 840C  , bore grinding range: 5 - 100 mm max. grinding depth: 100 mm max. swing diameter above the table: 310 mm height of the workpiece spindles above the floor: 1100 mm workpiece spindle speeds NC - programmable: 0 - 1000 rpm table strokes: Z-axis: 300 mm X-axis: 1050 mm table speed infinitely variable: Z-axis: 0 - 30 m/min. X-axis: 0 - 60 m/min. spindle bore: 28 mm spindle taper: MK4  , please also have a look at the PDF documents of this machine grinding depth: 100 mm, grinding spindle speed: 0 - 1000 rpm, control: SIEMENS Sinumerik 840C, table speeds: 0 - 60 m/min, weight approx.: 7,000 kg, Approx. Onsite Dimension. (l x w x h): 3,300 x 3,000 x 3,500 mm

Description: machine number: 8761 control: SIEMENS Sinumerik 840C working hours: approx. 102826 hrs.  , bore grinding range: 5 - 100 mm max. grinding depth: 100 mm max. swing diameter above the table: 310 mm height of the workpiece spindles above the floor: 1100 mm workpiece spindle speeds NC - programmable: 0 - 1000 rpm table strokes: Z-axis: 300 mm X-axis: 1050 mm table speed infinitely variable: Z-axis: 0 - 30 m/min. X-axis: 0 - 60 m/min. spindle bore: 28 mm spindle taper: MK4  , please also have a look at the PDF documents of this machine grinding depth: 100 mm, grinding spindle speed: 0 - 1000 rpm, control: SIEMENS Sinumerik 840C, table speeds: 0 - 60 m/min, weight approx.: 7,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 3,500 x 2,500 mm

Description: machine number: 8775 control: SIEMENS Sinumerik 840C working hours: approx. 95186 hrs.  , bore grinding range: 5 - 100 mm max. grinding depth: 100 mm max. swing diameter above the table: 310 mm height of the workpiece spindles above the floor: 1100 mm workpiece spindle speeds NC - programmable: 0 - 1000 rpm table strokes: Z-axis: 300 mm X-axis: 1050 mm table speed infinitely variable: Z-axis: 0 - 30 m/min. X-axis: 0 - 60 m/min. spindle bore: 28 mm spindle taper: MK4  , please also have a look at the PDF documents of this machine grinding depth: 100 mm, grinding spindle speed: 0 - 1000 rpm, control: SIEMENS Sinumerik 840C, table speeds: 0 - 60 m/min, weight approx.: 7,000 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 4,000 x 3,300 mm

Description: machine number: 8747 control: SIEMENS Sinumerik 840C working hours: approx. 100560 hrs.  , bore grinding range: 5 - 100 mm max. grinding depth: 100 mm max. swing diameter above the table: 310 mm height of the workpiece spindles above the floor: 1100 mm workpiece spindle speeds NC - programmable: 0 - 1000 rpm table strokes: Z-axis: 300 mm X-axis: 1050 mm table speed infinitely variable: Z-axis: 0 - 30 m/min. X-axis: 0 - 60 m/min. spindle bore: 28 mm spindle taper: MK4  , please also have a look at the video and the PDF documents of this machine grinding depth: 100 mm, grinding spindle speed: 0 - 1000 rpm, control: SIEMENS Sinumerik 840C, table speeds: 0 - 60 m/min, weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 3,400 x 2,300 x 3,000 mm

Description: machine number: 8760 control: SIEMENS Sinumerik 840C working hours: approx. 81758 hrs.  , bore grinding range: 5 - 100 mm max. grinding depth: 100 mm max. swing diameter above the table: 310 mm height of the workpiece spindles above the floor: 1100 mm workpiece spindle speeds NC - programmable: 0 - 1000 rpm  , table strokes: Z-axis: 300 mm X-axis: 1050 mm  , table speed infinitely variable: Z-axis: 0 - 30 m/min. X-axis: 0 - 60 m/min.  , spindle bore: 28 mm spindle taper: MK4  , please also have a look at the PDF documents of this machine grinding depth: 100 mm, grinding spindle speed: 0 - 1000 rpm, control: SIEMENS Sinumerik 840C, table speeds: 0 - 60 m/min, weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 4,000 x 3,300 mm

internal diameter:100 mm grinding depth:160 mm swing diameter:300/450 mm centre height:290 mm max. outer diameter:300/450 mm work piece spindle speed:50-360/90-700 U/min weight of the machine ca.:2900 kg Machine size (LxWxH):2500x1750x1800 mm face grinding attachement:mit Schleifscheibe internal grinding spindle:DKF Typ SLA 60x400 mit 20.000 U/min grinding wheel dresser:auf Tisch 3 jaw chuck Ø:200 mm coolant system with magnet grate:und Wassertank frequency converter:f. stufenlose Spindeldrehzahl f. Innenschleifeinrichtung 100 % before loading warranty: none one used internal grinding machine, make: Jotes, type: SOJ 10M, year of produktion 1986

internal diameter:300 mm grinding depth:260 mm swing diameter:500 mm spindle nose:A2-5 workhead motor:1,8 kw max. workpiece weight:50 kg work piece spindle speed:0-1000 U/min workpiece length - max.:300 mm grinding wheel speeds:20.000 1/min grinding wheel motor:3,75 kW rapid speed:8 m/min positioning accuracy:X/Y/Z: 0,001 mm repeating accuracy:X/Y/Z: 0,001 mm :3350x2250x1950 mm Weight approx.:5 t CNC controller:FANUC CNC-Steuerung 0i T Scales:Heidenhain in der X-Achse mit 0,005mm Auflösung servo spindle motor:für Werkstückantrieb 3 jaw chuck Ø:hydr. 200 mm coolant system:140 l :in deutscher Sprache spindle:Eingebaute elektrische Schleifspindel 40.000 U/min mit Zubehör ; Minimale Drehzahl: 30.000 U/min. Magnetic and paper filter :Kühlmittelsystem mit Magnetabscheider & Papierfilter 60/min, 200L

internal diameter:250 mm swing diameter:455 mm workpiece length - max.:1200 mm table rotating:-4/+8 ° table speeds:0-4000 mm/min max. workpiece weight:80 kg workhead - center taper:5 MK Rotation speed of workhead :0 - 400 1/min workhead motor:4 kw 3-jaw chuck:250 (selbstschließend) mm grinding motor:4 kW coolant pump:2,2 kW Weight approx.:2,4 t machine dimensions:3200 x 2100 mm CNC controller:Siemens 840 D oder SPS von Siemens autom. sensing device for grinding wheel:Option linear scales and ballscrew:in allen Achsen face grinding attachement:Durchmesser 125 mm clamping chuck:250 (selbstschließend), 1 Satz harte Backen, 1 Satz weiche Backen, 1 Satz Innen mm frequency control main spindel engine:für die Innenschleifeinrichtung internal grinding spindle:RPM 28.000, diam. 60 mm. Min. diam. cap. 25 mm. x Bohrung 50 mm, Max. diam. cap. 100 mm. x Bohrung 115 mm . internal grinding spindle: ...

internal diameter:300 mm swing diameter:300/350 mm workpiece length - max.:2300 mm table rotating:-2/+6 ° table speeds:0-4000 mm/min max. workpiece weight:400 (fliegend, 150mm von der Spindelnase) kg workhead - center taper:6 MK Rotation speed of workhead :0 - 400 1/min workhead motor:4 kw 3-jaw chuck:250 (selbstschließend) mm grinding motor:11 kW coolant pump:2,2 kW CNC controller:Siemens 840 D oder SPS von Siemens autom. sensing device for grinding wheel:Option linear scales and ballscrew:in allen Achsen face grinding attachement:Durchmesser 125 mm clamping chuck:350 (selbst zentrierend) mm frequency control main spindel engine:für die Innenschleifeinrichtung internal grinding spindle:auf Anfrage internal grinding spindle:auf Anfrage fixed steady rests:10-100 mm, 100-170 mm PERFORMANCE AND PRECISION DEGREE Robbi grinding machines are according to the international precision normes ...

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Tip height: 107 mm top width: 350 mm circular diameter: bed 200 mm spindle bore: 25 mm taper tailstock: 2 MK spindle speed: 35 - 3500 rpm feeds: longitudinal and mm/U thread pitches plan: 0.2-3 mm electrical connection: 380 V, approx. 2.2 kW space: 600 x 1300 x 1230 mm weight: 850 kg

Heavy Duty Lathe POREBA Model: TCA 160 /12000 Condition: Excellent, ready to work Year of manufacture: 1963 Complete Offer includes a lot of equipment Technical details : Control: Manual High of centrem over the flat way: 800 mm High of centres over the floor: 1 600 mm Swing over carriage: 1 280 mm Diametre of 4-jaws chuck: 1 600 mm Distance between centres: 12 000 mm Load carrying capacity without steady: 30 000 kg Load carrying capacity with 1 steady: 35 000 kg Load carrying capacity with 2 steady: 40 000 kg Equipment: - head for grinding 2 psc. - constant's lunette 3 psc. - mobile lunette: 1 psc. - milling head 1 psc. - carriages 2 psc. - change gear set, etc

digital display swingdiameter over bed 800 mm swingdiameter over slide 600 mm distance between center 2000 mm spindle speed750 1 / min multifix tailstock

TH 3309 Control and spindle lathe Fixed bezel D = 19-70 mm Revolving bezel D = 16-50 mm LED machine lamp Reduction sleeve MK 3 / MK 5 Motor protection switch Emergency stop foot operated Engine: 400V 1, 5 kW 50 Hz Tip height 156 mm Top width 830 mm Spindle speed 60 - 2000 min-1 16 levels Spindle cone MK 5 Spindle bore D = 38 mm Weight 430 kg Dimensions Lxwxh: 1685 x 745 x 1320 mm G & PIECES 3402030

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR

Working condition Complete electrics Yom: 1990 Technical details: Swing over bed: 2500 mm Turning length: 12 500 mm (The whole length of bed 15 700 mm) we can also make the extension of the needed workpiece weight: 120 tons bed width: 2 900 mm machine weight: 120 tons

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

No. 4620: 1 gebr. Guide and pull spindle lathe Fabr. BOLEY, Type 5 LZ, Arb.-Ber.: SpH 130 x 500 mm, Other: Spindle speeds: in 22 stages 28 - 2550 min-1 Space requirement: 1.5 x 0.9 x 1.25 m Weight ca 800 kg

Description Universal lathe suitable for tooling, fixture construction, training and mould making Peak height: 180mm Speed:25-2000 rpm Technical data Built in 2015 Speed 25-2000 rpm Peak height 180mm (360mm) Peak width 1000mm Spindle passage 38mm Reitstock MK 3 Total power requirement 4 KW Weight 880kg Connection 50 Hz 3x 380V

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL

Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system

Peak height 2,600 mm Point distance 10,000 mm Closed bench 2,000x6,000 mm To be completed with CNC

Height tips 220 mm Useful length 1,000 mm 42 mm bar pass

Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working

Max length 8,000 mm Maximum turning diameter above wagon 1,250 mm Max vault over guides 1,650 mm Maximum turning diameter under spindle 2,000x700 mm Displayed – two axes

Platò diameter: 1300 mm Used lathe in good condition, available unless sold.

IN THE RETROFITTING PHASE Height tips 900 mm Point distance 7,000 mm Turnerable diameter on the bench 1,850 mm Turnerable diameter on trolley 1,350 mm Turnerable diameter on recess 2,150 mm Bench width 1,000 mm Bar passage diameter 206 mm ASA A1 15" spindle attachment Top speed 300 RPM Diameter of the tank counterpoint 220 mm Row stroke counterpoint 450 mm Withworth threads - metrics - diametrics - module Weight allowed between tips without lunettes 15 ton Weight allowed between tips with a 20-ton bezel

Height tips 300 mm Distance between tips 4,000 mm Spindle speed (16) 15-1,500 rpm Bar pass 105 mm Engine power 15 HP displayed with ELBO system

peak heights: 250 mm point distance: 1500 mm bar pass: 105 mm

Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility

Code 0782 Description Centerlathe Make A.I. Hembrug Model DR - 133 Serial No. DR 133 / F 4018 Year 1970 Distance between centers 750 mm Swing over bed 270 mm Swing over gap xxx mm Swing over crossslide 150 mm Spindle bore 35 mm Number of spindle speeds 28 Spindle speeds 18 – 3550 rpm Feeds Longitude and cross Motor power 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck 2 x RSF DRO Condition Machine is in normal condition.

Code 2841 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 4475 Year 1976 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Condition Machine is in normal condition.

Code 2876 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 5150 Year 1980 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Steadies Rapid toolpost Condition Machine is in normal condition.

Main technical data: - Tip distance: 6000 mm - Tip height: 640 mm - Lathe complete with spindle, tailstock and tool turret

Machine Details Warehouse number 1105-03364 Machine type lead and pull spindle lathe Make CAZENEUVE Type HB 525 X 1000 Year of construction 1965 Conventional control type Storage location HAGUENAU Country of origin France Delivery time Immediate Freight base EX WAREHOUSE Technical details Turning diameter over bed 500 mm Turning diameter via support 220 mm Turning length 1000 mm Spindle speeds 25-2000 rpm various accessories YES Information IN GOOD WORKING CONDITION LOT OFF ACCESSORIS WITH MULTIFIXE TOOL HOLDER SYSTEMS