126,612 used machines on RESALE, but how to find them? Machine Search
Four fabric inspection machines are available (1) Menzel WOB 1.600mm fabric inspection machine, working width: 1600mm (2) Menzel WOB 3.200mm fabric inspection machine from Hoftex, working width: 3200mm (3) Bauch Maschinenbau CB-WU 380 fabric inspection machine (4) Maag CT 5206-Ah fabric inspection machine. On-site viewing is possible.
A Polytex foam coating machine is available. Roll width: 1900mm. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2500mm, weight: approx. 2400kg. Documentation available. An on-site inspection is possible.
1 BREITENBACH type Benjamin 3, 5-D high-performance continuous dyeing and finishing machine for elastic and rigid narrow fabrics (and bands, ribbons or tapes) made of polyamide, cotton or viscose year 1999 composed of: foulard dyeing padder roller width 300 mm with electrically heated vat, steamer capacity 34 m, 5 washing boxes each with squeezing padder and indirect steam heating, chemical finishing padder, hot air dryer capacity 50 m gas heated, exit for 4 tapes
The plant consists of two production units: Production Line B and Pre-Mix Unit 5 (MA5). PRODUCTION LINE B Production Line B is a complete nonwoven needlepunch line consisting of the following components listed in process order. 1. Suction / Filter Station (Filterstation) Function: Fiber dust extraction and air filtration for the production line. 2. Feed Shaft Manufacturer: Spinnbau Bremen Machine length: 3,970 mm Machine width: 2,600 mm Machine height: 6,233 mm 3. Belt Scale with Vibrating Shaft - Protec Vibrating Shaft: Length: 880 mm Width: 2,800 mm Height: 1,500 mm Weight approx.: 870 kg Belt Scale: Length: 550 mm Width: 3,000 mm Height: 700 mm Weight approx.: 550 kg Power supply: 3NAC 400V 50Hz 20A Description: The vibrating shaft produces a uniform fiber feed. The belt scale measures the weight of the fiber material being transported and regulates the feed spee ...
A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction ro ...
A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine.
Manufacturer: Boshite Model: TD-100 Type:Quilting Machine Voltage: AC 100-240V Frequency: 50/60 H Find more here - / Contact us at -
Fabric panels visible area 120x150 cm swivel 2 pcs.
Various fabrics, various sizes, cream, white, red, denim color, curtains Auction-ID: A1-45889-67
Toyota forklift, fabrication number: 8FBM20T-10423, capacity: 2000 kg, dimensions: 2100 mm x 1000 mm x 2100 mm. With Celectric accu, type: 24/6 PzS 750, 48 V, 750 Ah, weight: 1070 kg, dimensions: 750 mm x 900 mm x 1100 mm. Technical condition unknown. Without forks.
Motor tube Notchers from ALMI AL1â2U Notching of gas -, steam -, stainless steel, non-ferrous, as well as numerous other pipes with heavy use, ALMI has developed a series of particularly efficient pipe Notchers with electric drive. Wherever ensure the Notcher ALMI extremely quickly and accurately for the correct tube recess where welded tubes at a 90 ° angle. They are suitable also for the production of double corner joints. The pipe Notchers with a 2.2 KW motor is equipped for intensive use. The engine forms a whole with special eccentric shaft, which drives the notching tool. The model AL1-2U also has a Notcher for zinc spout. The tube Notcher has a 0 voltage fuse, and a protection device. Properties High productivity Low investment costs Several diameter available immediately Ideal for double corner joints up to 5 mm wall thickness (for VA up to 4 ...
An Eckenabrunder (corner punch) is designed to provide orthogonal edges with a RADIUS. With various stamping and punching tools, materials such as paper, cardboard, aluminum-composite, aluminum can be processed up to 2 mm (E.g. signs) and non-ferrous metals. Corners cut round NPR 45 incl. 1 piece knife R 4 or R 8.
Manual tool change Tools with PU scraper Machine including a wide range of round, square, slotted hole and cutting tools including tool presetter the stop rails are manually adjusted and clamped on the table using a scale embedded in the table, the stroke is triggered by a foot pedal fully hydraulic Punching pressure: 200 kN Colour: grey/blue Total power requirement:16 A Projection: 450 mm Punching capacity max.: Punching diameter 105 mm Max. stroke length: 0 - 35 mm Working area: 450 x 800 mm Table size: 1300 x 650 mm Strokes per min.: 150 strokes/min Connected load: 6 kVA Motor power: 5.5 kW Dimensions: 1400 x 1300 x 1700 mm Weight: 2400 kg Machine Number: 69
Matchbook noteblock pasting machine / advernote Matchbook Model Advernote Year 1980´s Size of the noteblock 50 x 50 mm Size of the cover 50 x 110 mm Cover process The cover is being fed automatic from the magazine by air, gets the creasing lines, and gets folded Noteblock process The noteblock is being fed automatic from the magazine by air, gets a dot of glue and is inserted into the cover Finished process The cover is folded in the correct sequence and will be delivered onto the delivery tray, upright. Available direct
DURMA VN 2006 hydraulic corner notching machine was built in 2016. The machine, equipped with state-of-the-art solutions and reliable components, is designed for machining workpieces made of plain and alloy steel with a maximum thickness of 6 mm. The machining process is performed on a robust, machined table with T-slots for fast and accurate tool positioning. Thanks to the automatic adjustment of the blade, high quality of material notching is achieved with the correct gradation and straightness of the cutting edge. The cutting angle is adjustable from 30° to 140° using knobs located on both sides of the machine. The three upper and four lower hydraulic cylinders in turn ensure that accurate and repeatable notching is achieved. The VN 2006 corner notching machine weighs 950 kg. Technical specifications of the DURMA VN 2006 corner notching machine - maximum workpiece thickness (60 ...
Manual cut-out shears of excellent quality, for the burr-free cutting of sheet metal up to 1.5 mm sheet thickness steel sheet/ST40 – aluminium 2 mm, backdrop-guided knife beam, shear length 150 x 150 mm, clink angle 90°, dimensions 460 x 500 x 810 mm, weight 75 kg
Combined punching machine, hydraulic Hydraulic Ironworkers 4 kW 900 kg
used electro-hydraulic notching unit Schlebach EHA, in mint condition, standard and clip relief can be processed, link, Driving and edging in three consecutive work steps, Preparation of a round neckline, prepared for lower and upper Rebate closures on roofs, dormers, facades and parapets before wedding finds Roof buckling points, grooves, monopitch roofs, façade bases, screens, Corridors and lintels, pre-profiled parallel coulters are divided into three sequentially connected work steps, oblique Shares or conical shares are alternately divided into four consecutive switched operations. Equipped with segmental rails in Upper beam, bending beam and support table. Various bending work, e.g. on Diamonds and shingles quickly and efficiently. Suitable for mirror roofing and cassette production Machine has been repaired, checked, cleaned by a professional and is fully functiona ...
Unclinking machine, little used Notching machine , lessly used Type: VA 200/ 4 Built / yom: 1995 Manufacturer / make: KEMPFLE Table size: 1000 x 800 mm Power:/ capacity: 4 mm / for steel / steel 400 Nm/mm 3 mm for stainless steel 600Nm/mm Length of cutter blades: 205 mm Number of Strokes/ strokes: 60 per minute Cutting head/ cutter head: 30...135° (stepless) Weight / weight: 1.15 tons Connection value/ connected power: 4 kW
Notching tool, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch stamp -Release tool: pneumatic -Notch: 18 x 9 mm -Dimensions: 180/200/H270 mm -Weight: 4.8 kg
capacity 41.9 x 2.7 R21 x 8 mm Featured with - Foot pedal - Operating Instructions (NL) Pneumatic machine
plate thickness: 1,6 mm pressure: 450 MPa : 150 x 150 x 90° table surface area: 650 x 500 mm : 875 mm cutting angle - upper blade: 4 ° weight of the machine ca.: 75 kg • manual notching machine with lower frame • sheet thickness (steel 450MPa) to 1.6 mm, aluminium to 2.25 mm, plastic to 3.0 mm, • machine for demonstration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 rpm - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Foot switch - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg
Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 rpm - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Foot switch - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg
offer 22391 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - Stainless steel with 600 N/mm² strength 4 mm - infinitely variable cutting angle adjustment 30 - 120 ° - pneumatically clamped - automatic cutting gap adjustment - Locking stops left + right each 300 mm - Table support surface 1000 x 800 mm - with T-slots and depth stops - Table height approx. 900 mm - Depth stops - Drive 400 V / 4 kW - E – Foot switch - Space requirement approx. W 1000 x H 1350 x D 1510 mm - Weight approx. 1800 kg
offer 22346 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - infinitely variable cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Foot switch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1300 kg
Pipe notching tool, pipe notching tool -Max. Tube diameter: 60 mm -Eccentric tension -Pipe bracket: swiveling -Dimensions: 480/160/H380 mm -Weight: 28 kg
SPECIFICATIONS: 2 saw blades Ø 250 mm (2.2 Kw each) 2 saw blades Ø 350 mm (2.2 Kw each) Speed: 3800 rpm Machinable length: min. 200 mm-max. 1200 mm With chip transport carpet
Notching machine, sheet metal notcher, notching shear, corner notching machine, corner shear, corner shear -Max. cutting capacity: approx. 2 mm -Blade length: 102 mm -Dimensions: 620/590/H1790 mm -Weight: 150 kg
Data sheet of retrofit POS. GE 14.45 Gebhardt roller conveyor (without drive), FB = 550 mm, 3000 mm = FL Type: Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: 14 kg/m = G Length: FL = 3000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 3000 Nominal / outside width in mm: 510 Roll width in mm: 450 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telef ...
Data sheet of retrofit POS. GE 20.25 Gebhardt roller conveyor (without drive), FB = 1,260 mm, 2000 mm = FL Type. Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Net weight: 25 kg/m = G Length: FL = 2.000 mm Conveyor width: FB = 1.260 mm Overall width B = FB + 60: B = 1,320 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 1320 Roll width in mm: 1260 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfa ...
Data sheet of retrofit POS. GE 40.40 Gebhardt roller conveyor (without drive), FB = 450 mm, 8.900 mm = FL Type: Gebhardt roller conveyor type 330.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: 14 kg/m = G Length: FL = 8.900 mm Conveyor width: FB = 450 mm Overall width B = FB + 60: B = 510 mm Side profile: Aluminium Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Support: ask without support, if needed Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 8900 Nominal / outside width in mm: 510 Roll width in mm: 450 Roll division in mm: 100 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tel ...
Key data: 6 mm
Type : K 30 – 120 Specifications: Sheet thickness 6 mm at 400 N/mm² 4 mm at 600 N/mm² Cutting length 200 mm Angle adjustment from 30 - 120 ° Drive power approx. 4 KW
Key data: 4 mm
Max. sheet thickness: 4 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Hydraulic knife clamping and locking+ Cutting depth infinitely adjustable with digital display New set of upper and lower knives installed Weight: approx. 1,000 kg
Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Knife sharpened Weight: approx. 1,200 kg
Key data: 225 mm
Sheet thickness 6 mm Knife length 225 mm Machine weight approx. 1.2 t Space requirements approx. 1.1 x 1.4 x 1.5m Total power requirement 55 kW Notching machine with fixed angle 90°
Notching milling machine -automatic hydropneumatic milling feed -Maximum cutter diameter: 250 mm
Key data: 4 mm
Indumasch V 204 - Angle-adjustable notching machine Cutting length: 200 mm Capacity: 4 mm - Stroke adjustment with digital display - Lateral clippings ejection - Workplace lighting - Foot pedal Specifications - Cutting length: 200 mm - Cutting capacity steel: 4 mm - Cutting capacity stainless steel: 3 mm - Stroke rate: 60 /min - Cutting angle adjustment: 30 - 135 ° infinitely variable - Table dimensions: 1000 x 800 mm - Oil tank: 60 l - Motor power: 4 kW - Operating voltage: 400 V - Dimensions WxHxD: 1000 x 1480 x 1600 mm - Weight: approx. 970 kg More products, information & prices on metallmaschinen.at
Abstanz- und Einkerbmaschine / Cutting and Notching machine Schmedt PräCut 65 Baujahr / Year 1997 - Serial-No. 79 Book block height: up to 350 mm Book block thickness: up to 90 mm Air supply: 10 bar Power supply: 400 V / 50 Hz / 1,6 kW (three-phase) Output: approx. 250 - 350 pcs / hour Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Digital angle displays on the right and left Weight: approx. 1,200 kg
Max. sheet thickness: 4 mm steel, 3 mm stainless steel Knife length: 250 mm Strokes per minute: 52 Weight: approx. 900 kg Knife sharpened Depth stop
Technical information Exhibition Machine Brand INDUMASH Manufacturer's ref. NOTCHING MACHINE SAF 2 Model SAF 204 Table size 700 x 620 mm Weight 550 kg Gross weight 550 kg
Machine almost unused Pressure: 60.0 t Square steel: 35.0 mm Technical specifications Pressure: 60.0 t Square steel: 35.0 mm Angle steel: 120x120x12 mm Round steel: 40.0 mm Punching cross-section in sqmm: Ø28 in 15 / Ø38 in 11 mm Projection: 220 mm Flat steel: 200x20 / 300x15 mm Y0798Jol Knife length: 317 mm Oil capacity: 45.0 ltr. Working height: 940 / 1140 mm Stroke rates per minute: max. 26 Working stroke: 55.0 mm Total power requirement: 4.0 kW Machine weight approx.: 1425 kg. Dimensions HxWxD: 1510 x 590 x 1570 mm
plate thickness: 3 (VA), 4 (ST 40) mm cutting angle adjustment: 30 - 120 ° cutting length: 200 mm throat: 300 mm table height: 900 mm work stroke: max. 40 mm no. of strokes: max. 40 Hub/min Punching capacity: 125 kN punch diameter: max. 105 mm total power requirement: 4 kW weight of the machine ca.: 20 t dimensions of the machine ca.: L 1,5x B 1,3 x H 1,38 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication
cutting angle: 90 ° cutting length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3,0 kW weight: 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Notching milling machine -automatic hydropneumatic milling feed -for milling cutters max.: Ø 250 mm
maximum number of results exceeded
please refine your search
10 € 
