f k used for sale

Inv. Num. : 7631 Type: F80 Produzent: Pfeifer Erzeugt: 1976 Parametern: Maximale Drehzahl der Spindel: 1000 1/min Verfahrwege X-Achse: 1700 mm Verfahrwege Y-Achse: 1800 mm Verfahrwege Z-Achse: 1800 mm Verfahrwege W-Achse: 710 mm Spindeldurchmesser: 80 mm

FANUC M-710iC/70 robotic station for laser cutting and welding was built in 2017. The offered station is complete and includes the following components: – FANUC M-710iC industrial robot – IPG YLS-4000-S2T fibre laser source – FANUC SYSTEM R-30iB controller – 2-position rotary table with horizontal rotation – 2-axis L” type positioner – semi-automatic head changing system – HIGHYAG BIMO-FSC laser cutting head – IPG Photonics FLW-D30 Vertical oscillating laser welding head with HD camera – KLIMAWENT UFO-4-M/N-1/R filtering system – wire feeder (4 reels and equipment for 0.8 mm and 0.6 mm wire) – portable teach pendant FANUC A05B-2255-C101 – control system – metal construction with cabin Laser machining of workpieces is performed by a specially designed FANUC M-710iC/70 robot arm, distinguished by the best permissible load and inertia in its categ ...

Two-chamber vacuum machine Ital Form Dimensions of the machine: 1845×868×1020mm Chamber dimensions: 880x755x170mm Sealing length: 820mm Number of heaters: 2 Electric power: 3kW Weight: 295kg

Automatic controlled guillotine cross knife Consistent high throughput Chamber length: 620 mm Chamber cross section: 120 x 120 mm

Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK 602 VE -Nominal power input: 1000 W -Stroke rate: 800 - 2400 /min -Dimensions: 620/260/H110 mm -Weight: 9 kg

weight max. in kg: 1000 kg fork length: 1150 mm stroke height: 1500 mm total power requirement: kW weight of the machine ca.: 255 Kg dimensions of the machine ca.: 1,7 x o,9 x 1,8 m Manual hydraulic forklift, Polyurethane swivel castors, Nylon fork rollers, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK ZSK 602 E -Nominal power input: 1000 W -Stroke rate: 700 - 2400 /min -Dimensions: 620/260/H110 mm -Weight: 8.6 kg

electric motor, three-phase motor -Manufacturer: Fimec, electric motor -Type: H132SD2UE -Power: 11 kW -Speed: 2800 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection rating: IP54 -Number: 4x motors available -Price: per piece -Dimensions: 480/255/H340 mm -Weight: 53 kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, control spool, pneumatic control valve -Manufacturer: Festo, pneumatic control valve -Type: VHER-PH-B43E-B-G18 3488211 -PN: 0 - 10 bar -Dimensions: 110/70/H70 mm -Weight: 0.2 kg

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA machine for joining parts of chairs, living rooms, furniture, etc. the FTA machine is made up of 3 automatic operating units : 1st unit : circular saw for cutting workpieces to length 2nd unit : spindle moulder for milling with hydraulic sliding carriage 3rd unit : drilling unit with multiple center distance head . there are 9 work programs that can be selected and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 . hydraulic sliding carriage - Boring unit . engine power Hp 3 . max. depth drilling mm. ...

Key data: 800 mm, 1900 kg

A favourable price and quality are not a contradiction at Hanst Tec - after all, there is the FORMAXX Z series. Conventional die-sinking EDM systems designed in such a way that their price enables cost-effective hourly rates, while the technology fulfils all the quality criteria that are typical for Hanst Tec: - easy to operate - reliable Traverse paths: X - 500, Y - 400, Z - 350 mm maximum distance Table - working head: 275-625 mm Workpiece load: 1900 kg The machine is in good condition, and available immediately!

Gas cylinder trolley, gas cylinder cart, steel cylinder cart -Tires: Air -External dimensions: 1000/750/H1200mm -Weight: 36 kg

1 Continuous Block Caster Mfc.: Fata Hunter Built: 1999 Capacity: 9 T/h Block size: 350-480 x 26 mm – W x T Flat bed / solidify length: 1.3 m

1 Continuous 5 Stand Hot Rolling Mill Mfc.: Fata Hunter Built: 2000 2 Rewinders Strip width: 480 mm Thickness: in 26 mm out 2.0 mm Qty. 1 Hot Gas Filter Mfc.: Nederman Built: 2015 Type: Flat bag filter Capacity Flow: 45000 Nm³/h Temp.: 125 °C Filter area: 650 m²

Table dimensions: 2500x 780 mm Motor output: 7,5 kW Spindle diameter: , mm reus: 1.500 - 10.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGC -Stroke: 430 mm -Shock absorber: DGC 18-460-KF-YSRW-A -Quantity: 1x sled available -Dimensions: 665/60/H65 mm -Weight: 2.5 kg

Impact protection, crash protection, shelf protection, column protection, column impact protection, shelf impact protection, corner crash protection -Impact protection: Shelf impact protection, corner bumper protection -Type: L-shape -Height: 400 mm -Quantity: 1 piece available -Dimensions: 305/145/H400 mm -Weight: 5.4 kg

Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGC -Stroke: 460 mm -Quantity: 1x sled available -Dimensions: 650/50/H70 mm -Weight: 2.4 kg

Hydraulic manifold block, hydraulic fitting, hydraulic T-manifold, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Configuration: 7x shut-off valve with hose -Pressure: up to 350 bar -Dimensions: 1085/660/H140 mm -Weight: 28 kg

Hydraulic manifold block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Installment: 7x shut-off valve with hose and control valve -Pressure: up to 350 bar -Dimensions: 1055/680/H150 mm -Weight: 31 kg

number of stapling heads: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sparc Cerberus Combination unit Fortress Metal detector head Usable aperture - 350mm x 120mm Conveyor - 300mm Weigh Table length - 520mm Right to left direction Ply belt 16amp single phase plug machine is fully tested and working with new belts, bins supplied and all fail safes working Lockable bin, bin full etc Supermarket Spec

Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Oil cabinet, oil cabinet, oil pump, oil dispensing station -with counter -Extendable hose with dispensing nozzle -Compressed air connection

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Clamping angle: 200 x 200 mm -centrically exciting -Mouth size: Ø 200 mm -Weight: 30 kg

Tapping machine, bench drilling machine -Spindle mount: B12 -Tap chuck: Tapmatic 30 X M1.5-M7 -Projection: 165 mm -Motor power: 0.25 kW -Weight: 60 kg

Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Outer diameter: 210 mm -Width: 53 mm -Inner diameter: 140 mm -Weight 6.3 kg

spherical roller bearing -Type: 22218 E -Weight: 3.5 kg -Outer diameter: 160 mm -Width: 40 mm -Inner diameter: 90 mm

spherical roller bearing -Bearing type: Spherical roller bearing -Bore: Ø 55 mm -Outer diameter: Ø 120 mm -Width: 43 mm -Weight: 2.5 kg

spherical roller bearing -Weight: 2913 g -Outer diameter: 130 mm -Width: 46 mm -Inner diameter: 60 mm

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 65 mm -Outer diameter: 120 mm -Width: 32.75 mm -Weight: 1.6 kg

tapered roller bearings -Weight: 7250 g -Outer diameter: 230 mm -Width: 40 mm -Inner diameter: 130 mm

tapered roller bearings -Bearing type: Tapered roller bearing -Bore: Ø 60 mm -Outer diameter: 110 mm -Width: 29.75 mm -Weight: 1.3 kg

self-aligning ball bearing -Bearing type: Self-aligning ball bearing -Bore: Ø 35 mm -Outer diameter: 80 mm -Width: 31 mm -Weight: 0.65 kg

Cylindrical roller bearings -Type: NJ 206 -d: Inside: 30 mm -D: Outer: 62 mm -B: Width: 16 mm -Quantity: 50x cylindrical roller bearings available -Price: per piece -Weight: 0.2 kg/piece

Cylindrical roller bearings -Outer diameter: 130 mm -Width: 31 mm -Inner diameter: 60 mm -Weight: 1.9 kg -Number: several available

NN3030 ASK. M.SP High Accuracy Cylindrical Roller Bearing with Brass Cage Manufacturer: FAG NEW, in original packaging €1,250.00 /piece 2 units available

Tenon and slotting machine, tenon cutting machine, tenon cutter, slotting rotor, tenon cutting and slotting machine -Recirculating rotor: 3 positions -Length stop -Workpiece tension -Dimensions: 1400/800/H1500 mm -Weight: 560 kg

B7010C. T.P4S. UL Spindle Bearings High-precision angular contact ball bearings Manufacturer: FAG New, original packaging Price €145.00 / per piece(s) 3 units available

B7008C. T.P4S. UL Spindle Bearings High-precision angular contact ball bearings Manufacturer: FAG New, original packaging Price €95.00 / per piece(s) 2 units available

Linear drive, linear gearbox, lifting gearbox, spindle drive -Condition: unused, from warehouse clearance -Manufacturer: Festo -Type: DGP - 40 - 730 PPV - A - B -161782 W208 -P: max. 8 bar -Number: 3 drives available Price: per piece -Weight: 7 kg/piece

workbench, work table, assembly bench -Width: 1250 mm -Depth: 700 mm -Height: 860 mm -Drawer: 1 -Weight: 75 kg

hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter output: 21 l/min -Weight: 200 kg

Key data: 3200 mm, 2100 mm, 200 mm

cnc machining center for nesting applications Measuring machine

Punching machine, punching device, hole punching machine, multi-head punch, multi-head punch, punching system -Quantity: 5x punches -Max. width: 1000 mm -Tool built-in: 8x45 mm -Distance between punches: 187 mm -powered: electric -Weight: 280 kg

refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor -Power: 5.5 kW -Speed: 1415 rpm Quantity: 1 piece available -Dimensions: 450/500/H560 mm -Weight: 150 kg

Tool Milling Machine Cover FP3 2201 Travel XYZ: 500-300-380mm Spindle holder : ISO 40 S20x2 Spindle speeds: 40 to 2000 Universal table (or angle table) With active digital display on 3 axes Heidenhain TNC 113 Drill quill hor and vert Stepless feed and rapid traverse on all 3 axes Motor 3 Kw Built in 1979 220 Volt 3ph (with transformer 400-220V if necessary) The machine has been technically tested

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 3000 rpm -Brake -Shaft: Ø 24 mm -Design: B5 -Protection class: IP 44 -Number: 3x motors available Price: per piece -Weight: 25 kg/piece

Geared motor, electric motor, electric geared motor, geared motor for stop -Speed: 7.1/320 rpm -Power: 0.16/3 kW -Design: B5 -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 40 kg

Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 40 kg