f k used for sale

Part: Mitsubishi Mazak PCB board type FR33 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Part: Mitsubishi Mazak PCB board type FR43 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 250 mm -Width: 41 mm -Number: 1x discs available -Price: per piece -Weight: 4.4 kg

Part: Mitsubishi Mazak PCB board type FR47 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Part: Mitsubishi Mazak PCB board type FR57 Repair and Exchange service Reparatur und Austausch Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

turning diameter: 200 mm turning length: 508 mm x-axis: 176 mm z-axis: 520 mm control: Fanuc-Series O-TD total power requirement: kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 2,73x1,98x1,64 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Shaft: Ø 39 mm -Shaft length: 470 mm -Recording hole: Ø 17 mm -Number: 4 pieces of shock absorbers available -Price: per piece -Dimensions: 1755/140/H100 mm -Weight: 24 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders -Manufacturer: Festo -Type: -Piston rod: 20 mm -Cylinder mounting: Ø 16 mm -Piston rod mounting: M16 x 1.5 mm -Stroke: max. 1180 mm -Max.: 10 bar -Quantity: 1 cylinder available -Weight: 11 kg

Gear motor, electric motor, three-phase motor -Manufacturer gearbox SITI type: MVF49/F -Manufacturer motor SME type: FC71B -Speed: 97 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: 25 mm -Protection class: IP 44 -Dimensions: 350/190/H175 mm -Weight: 9.4 kg

Gear motor, electric motor, three-phase motor -Manufacturer gearbox SITI type: MI50A -Manufacturer motor SME type: FC71B -Speed: 45 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: 24 mm -Protection class: IP 44 -Dimensions: 360/160/H230 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor -Gearbox manufacturer Bonfiglioli type: MVF44/F -Manufacturer motor SME type: FC63B -Speed: 100 rpm -Power: 0.18 kW -Construction: B14 angle -Diameter hollow shaft: 18 mm -Protection class: IP 44 -Dimensions: 310/140/H185 mm -Weight: 6.65 kg

Punch holder, die holder, punching tool, punch, punching die, punching punch -Matrix size: 13.7 mm -Matrix holder: for punching in the legs -Dimensions: 200/120/H90 mm -Weight: 8.7 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -only one tool available (counter tool missing) -Shearing tool for channel steel: 30 mm, 60 mm -Type: 441216084902 -1x dimensions: 210/220/H30 mm -Weight: 9.9 kg

Gear motor, electric motor -Speed: 140 rpm -Power: 0.37kw -Construction: B3 angle -Diameter hollow shaft: Ø 24 mm -Protection class: -Number: 1x gear motor available -Dimensions: 360/160/H235 mm -Weight: 12kg

Gear motor, electric motor, electric gear motor -Transfer in current condition as seen -Speed: 27 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 510/160/H210 mm -Weight: 16 kg

Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch punch -Shearing tool for T-steel: 120 x 70 mm -Square: 25 mm -Round: 27mm -Type: 50305 -Dimension respectively: 175/140/15 mm -Weight: 5kg

Banding film BandAll FTN5048150; Width 48mm; Thickness 50 mic; 150 linear meters/roll; 33 cartons of 6 rolls. Banding foil BandAll FTN5048150; width 48mm; thikness 50 mic.; length 150m/roll; 33 cartons each 6 rolls.

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 80 mm -Type: 441215124701 -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 120 mm -Type: 441215124901 -Type: 441215124902 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Affeldt roller conveyor tables 1000-531-237 mobile, two-part RA1292 The staging roller conveyors have two parallel roller conveyors and have a mobile base frame. This makes them flexible to use. They are in good condition (used). Technical data: Manufacturer: Affeldt Type: Roller conveyor 1000-531 Year of manufacture: unknown Condition: good (used) Conveyor length (FL): 1000 mm nominal/outer width (NB): 531 mm Conveyor width total: 531 mm Conveyor width single: 2 x 237 mm roller pitch: 34 mm Height OK roller: 850 mm adjustable +/- 50 mm Scope of delivery: with base frame and swivel castors Availability: 7 pieces Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. W ...

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -1x dimensions: 140/140/H30 mm -1x dimensions: 135/135/H30 mm -Weight: 8 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -Type: 440065124502 -Type: 440065124501 -1x dimensions: 136/130/H25 mm -1x dimensions: 128/132/H25 mm -Weight: 6 kg

Punch holder, die holder, punching tool, punch, punching die, punching punch -Die cut size: 9 x 25 mm -Groove between punch and scraper: 5 mm -Dimensions: 200/140/H170 mm -Weight: 12 kg

Turning device, forging device, welding turning device, welding device -for: production of spirals, springs ... -Holder: Ø 88 x 300 mm -Speed: 31 rpm -Drive: 1.5 kW -Voltage: 400 V -Dimensions: 1000/550/H1200 mm -Weight: 120 kg

end mill, end mill, milling cutter -Condition: Like new -Diameter: 50 mm -Working height: 100 mm -carbide-tipped -Recording: SK50

Valve islands, multi-pin plug connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: FESTO -Type: CPV10-GE-FB-8 -Electrical connection -Dimensions: 195/125/H80 mm -Weight: 1.2 kg

Metal band saw blade, band saw blade -Condition: unused in original packaging -Number: 5x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 2085 x 20 x 0.9 mm

Pressure regulator intermediate plate -Manufacturer: Festo -Type: LR-ZP-AD-2 -From: 0 bar to: 12 bar -Number: 1x valve available -Price: per piece -Dimensions: 250/60/H55 mm -Weight: 1 kg

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Manufacturer: Festo -Type: MFH-5/2-D-2-FR C -Magnetic valve -PN: 3-10 bar -Number: 1x valve available -Price: per piece -Weight: 0.62 kg

Offer here a linear actuator with 30cm stroke and 8cm piston diameter. Ready to use with check valves, flanges, 16mm QuickLocks. It also comes with a plant dismantling and worked without any problems until the expansion. It can be seen in Weyhe near Bremen.

Geared motor, electric motor, three-phase motor -Speed: 12 rpm -Power: 1.1 kW -Design: B3 angle -Hollow shaft diameter: Ø 35 mm (shaft Ø 35 mm) -Dimensions: 510/220/H300 mm -Weight: 33 kg

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 4 kW 960 rpm -Max. Delivery rate: 2.58 m³/h -Max. Pressure: 3 bar -Max. Temperature: °C -Dimensions: 730/350/H310 mm -Weight: 88 kg

Weibert FS 32 Dressing thickness planing machine Planer width: 320mm Planer shaft: 3-reversible knife shaft Motor power: 3KW n=4500rpm, 400V Passage height: 4-225mm Professional side stop WJ-300100 OPTIONS AT EXTRA COST: with professional dressing stop Slotted hole drilling device Westcott chuck 0-16mm Driving device Height adjustment digital Drive motor 4KW S1

Gear motor, electric motor, electric gear motor -Engine manufacturer: VEM -Manufacturer gearbox: VEM -Speed: 295 rpm -Power: 1.1 kW -Construction: B5 -Diameter shaft: 40 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 530/250/H380 mm -Weight: 56 kg

Festo pneumatic cylinders RA1941 Manufacturer: Festo cylinders Some still Orginalverpackt alongside prices are per piece. 8 x ADVU-25-10-P-A 86,39€ 7 x ADVU-40-15-P-A 128,46€ 8 x ADVU-40-20-A-P-A 131,49€ 4 x ADVU-25-20-A-P-A 89,60€ 8 x DNC-63-160-PPV-A 198,00€ 1 x DNC-50-125-PPV-A 165,03€ 7 x DNC-40-80-PPV-A 139,50€ 1 x DNC-40-200-PPV-A 149,01€ 2 x DNU-32-50-PPV-A price on request 3 x STA-50-30-P-A-SA Price on request 1 x FENG-40-200-KT+DNC-40-200-99A 624,99€ 1 x FENG-40-200-KT 474,99€ 4 x DMM-25-15-P-A 46,38€ 1 x DFM-32-50-PA-GF 228,55€ 8 x DNC-32-40-PPV-A 120,54€ 1 x DNC-32-50-PPV-A 121,15€ 10 x DNC-32-80-PPV-A 122.93€ 10 x DNC-40-50-PPV-A 137,13€ 3 x DNC-50-80-PPV-A 160,87€ 2 x DNC-50-50-PPV-A 157,85€ 5 x DSNU-25-25-PPV-A 43,28€ 4 x ESNU-25-20-P-SA Price on request 1 x DSNU-25-10-P-A 36,59€ 2 x DSNU-20-20-P 34,65€ 1 x ESNU-16-25-P Price on req ...

Platform trolleys, transport trolleys, heavy trucks, table trolleys, assembly trolleys -Material: stainless steel -for: pump transport -Area: 300 x 1610 mm -External dimensions: 2160/580/H400 mm -Own weight: 58 kg

Reflection light barrier, light barrier, reflection light scanner -Number: 1x button available -Price: per piece -Weight: 0.06 kg

Pressure control valve, pressure control directional control valves -Manufacturer: Festo -Type: MS4-LRB-1/4-D6-A8-AS -Operating pressure: 0-10 bar -Number: 1x valves available -Price: per piece -Dimensions: 130/60/H40 mm -Weight: 0.22 kg

Bending tool, die, upper knife, upper tool, upper beam -Tool: for folding machine -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg

turning diameter: 330 mm turning length: 140x130 mm control: turning diameter over slide: 140 mm travel -x axis: 107 mm travel -z axis: 230 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending tool, die, lower knife, lower tool, lower jaw -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Pneumatic cylinder -Manufacturer: Festo -Type: ADVUL-80-80-PA -Stroke: max. 80 mm -Max.: 10 bar -Price: per piece -Number: 26x available -Weight: 0.3 kg

FINN POWER PRIMA POWER EBe system Year 2011 4kw All-electric machine tower warehouse 10 levels punching machine with electric shear Loading and unloading robots Electric panel bender 2200 height 205 Available April 2024

Vertical machining center Chiron FZ08W :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 21M Tool connection: HSK 32 Spindle power: 3,7Kw Number of spindle revolutions: 15000 Number of tools: 12 X Axis Stroke: 300mm Y Axis Stroke: 250mm Z Axis Stroke: 250mm Rapid feeds linear axes X Y Z: 40 40 60m/min Guides: roller Pallet change: yes Pallet size: 550 x 300mm Maximum load allowed: 200Kg Rotopallet: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 2600mm Width: 1400mm Height: 2100mm Weight: 2200Kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2880 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 520/330/H275 mm -Weight: 47 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 1445 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 450/265/H410 mm -Weight: 79 kg

Three-phase motor with 2 speeds, electric motor -Power: 3/5.2 kW -Speed: 720/1450 rpm -Shaft: Ø 32 mm -Construction: B3 -pole changing -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 510/370/H300 mm -Weight: 92 kg

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Smugglers/smugglers conveyor technology Model: Round belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total width outside: approx. 1790 mm Total width inside: approx. 2300 mm Conveying width incl. motor: approx. 800 mm Conveying width without motor: approx. 710 mm Roller spacing/ axle spacing: 120/65 mm Frame height: approx. 125 mm Frame width: approx. 35 mm Colour: Light grey Including SEW motor (037 KW) Includes side guide Feet to be ordered separately. In stock: 1 Price per piece The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made soluti ...

Shrink packaging FL5545TB L sealer and shrink tunnel Serial: 872 2012, L sealer on conveyor, sealing bars 550mm x 450mm, into shrink tunnel, aperture 400mm x 220mm, variable speed conveyor and adjustable temperature controls, mobile, 3Ph