f k used for sale

Excellent general condition. Used by plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting forces, low machine load... Travels x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / drive power main spindle 11 kW feed speed 0 - 30 m/min / Table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max Wzg diameter 63mm / WZG length 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, Type TS 220 / Coolant device / chip conveyor / extraction (optional) Complete enclosure Heidenhain control type TNC 426 PB digital / electronic handwheel Heidenhain HR 410

SPECIFICATIONS: Machinable length: max. 600 mm Pneumatic adjustment 01 Sawing unit 02 milling motors (1.5 kW) With loader.

Pharyngeal theory, border pharyngeal theory, double-mouthed -Throat study including: good and reject sides -Measuring range: 3/4/5/6/7/8/9/10/12/14/15/25/53 mm -various manufacturers -List: in the photos -Sale: only complete set -Weight: 4.9 kg

Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate, straightening bench ... -Number: 1 prism available -Dimensions: 100/120/H60 mm -Weight: 5 kg

Glue application machine with 2 rollers Mod. SC2R-1300 Year: 2006 Production: FIN s.r.l. Italy Main technical specification: Width of machining: 1300mm Maximum passage between rollers: 120 mm Diameter of rollers: 185mm Progress speed: 19m/min Net weight 390 kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 222 x 153cm 400 V, 50 Hz, 037 Kw Accurate and uniform application with any type of adhesive, excellent technical characteristics, For the high practicality, functionality and safety for the operator, set it at the at the top of the 2-roll glue application machines. Coating roller covered with acid-resistant rubber, ground and grooved, hard-wearing as they are Built with a rational layer of rubber, it is therefore possible to carry out 6-7 grinds. It is easy and quick to disassemble. Distribute, precisely and evenly on one or both sides ...

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Piston: Ø 70 mm -Stroke: 75 mm -Max. Pressure: 12 bar -Pneumatic damping, adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 100/100/H235 mm -Weight: 3.5 kg

For vegetable

centrifugal fan, dust extraction fan, fan, suction, dust blower -Motor power: 15 kW -Speed: 2925 rpm -Total pressure: Pg 33 m bar -Total pressure: Pst 30 m bar -Volume flow: 9660 m3/h -Inlet connection: O 400 mm -Outlet connection: O 400 mm -Dimensions: 1090/860/H1200 mm -Weight: 238 kg

Electric motor, three-phase motor -Power: 0.15 kW -Speed: 1400 rpm -Shaft: Ø 10 x 20 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 240/193/H140 mm -Weight: 4.8 kg

Stick electrodes 3.2 x 350 -Type: FOX DCMS Kb -Price: per package -Number: 5 packages available -Weight per package: 4.4 kg

Stick electrodes 4.0 x 350 -Type: FOX DMO Ti -Price: per package -Number: 6 packages available -Weight per package: 4.6 kg

Stick electrodes 2.5 x 250 -Type: FOX SPE -Price: per package -Number: 16 packages available -Weight per package: 3.4 kg

Stick electrodes 4.0 x 350 -Type: FOX DMO Kb -Price: per package -Number: 7 packages available -Weight per package: 4.6 kg

Stick electrodes 3.2 x 350 -Type: FOX EV 70 Mo -Quantity: 1 package available -Weight: 4.5 kg

Stick electrodes 4.0 x 450 -Type: FOX EV 70 Mo -Price: per package -Number: 12 packages available -Weight per package: 5.9 kg

Stick electrodes 4.0 x 550 -Type: FOX CM 2 Kb -Analysis: AWS A5.1 -Price: per package -Number: 40 packages available -Weight per package: 5.6 kg

Stick electrodes 4.0 x 450 -Type: FOX EV 50 -Analysis: C .07 Si 0.5. Mn 1.1% -Price: per package -Number: 17 packages available -Weight per package: 5.8 kg

Stick electrodes 4.0 x 350 -Type: FOX CM 2 Kb -Price: per package -Number: 4 packages available -Weight per package: 4.8 kg

Recycling machine trade AGICOM- Pedergnana OG: Screw conveyor demonstration device - for the transport of granules. Construction: Metal construction with drive and transmission gear. The discharge height can be adjusted by adjusting the legs. electric motor 1.1 kW; Length 2.5 m

SPECIFICATIONS: Power horizontal milling motor: 3 kW Variable speed drive: 0.37 kW Equipment: 01 Automatic loader

MACHINE IS IN AS NEW CONDITION, AWAILIBLE IMEDIATELY WITH DOCUMENTATION YEAR 2018 450 KG FOR THE CKLIENT WE ORGANIZE TRANSPORT AS WELL

Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Support: 150 mm -Number: 1x disc puller available -Price: per piece -Dimensions: 192/94/H128 mm -Weight: 5.3 kg

Surface grinding machine, grinding machine -hydraulic horizontal surface grinding machine -Magnetic plate: 300 x 150 mm -Grinding wheel motor: 1.1 kW 2800 rpm -Water cooling with: filter -Grinding disc diameter: 200 mm -Transport dimensions: 1470/1170/H1920 mm -Weight: 1090 kg

diameter: 300 mm width: 200 mm height: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diaphragm pump, centrifugal pump, water pump, chemical pump -from: scrubbing machine make Gansow -Delivery rate: 8.7 l/min -Number: 1x available -Price: per piece -Dimensions: 180/100/H110 mm -Weight: 1.6 kg

Bizerba CWL Eco flex continuous scale with Sick VMS520 volumetric measuring system Bizerba CWL Eco flex Continuous Scale Dynamic weight detection with volume determination The CWL Eco flex can be integrated almost effortlessly into existing parcel shipping, sorting systems and feeding lines. Bizerba WM-CWL flex Continuous Scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Min 0.4 kg 230 V Sick VMS520 volume measurement system Features • Non-contact, active measuring method • Measuring the length, width and height of cuboid objects • Measure the length, width and height of objects with almost any shape • Works with a wide variety of surface structures and on different flat conveyor systems • Flexible system configurations • Calculation of the small-envelope cuboid (box volume) • Calculation of the real volume Device components Sick ...

Cantilever racks SPECIFICATIONS Mast height: 4000 mm (blue) Truss length: 1200 mm or 1200+1200 mm (orange) Item 1 05 Supports 10 trusses Grid/round POSTS 2 07 Supports 14 trusses Grid/round Item 3 11 Double-sided supports (re-li) 44 trusses Grid/round Base 2600 x 30 x 30 mm Item 4 17 double-sided supports (re-li) 68 trusses Crossbars Base 2600 x 30 x 30 mm

Loipfinger FLM3C cylinder mower for front mounting, 3-fold sports cutter 6-blade, working width approx. 2.10 m, three-point attachment Cat.I (removable) or coupling triangle. With StVZO equipment, turn signals and marker lights. Mowing spindles can be switched forward and reverse.1 Hydraulic connection ew required for spindle excavation, adjustable lowering throttle valve available. Note: Mounted at the rear only for test operation, the mower belongs to the front. Price on request. Further mowing technology in stock. An appointment is required for viewing!

x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm Control: FANUC 31i-B5 Tools changer: 14 pos. table-size: 850 x 410 mm number of spindle speeds: 24.000 U/min/rpm rapid traverse feeds: 48 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chassis, electric motor, DC motor, traction motor, drive motor -Chassis for pedestrian stacker make: OMG type 214EA -with: recording and drive -Dimensions: 270/350/H285 mm -Weight: 38 kg

Input module for valve terminals -Type: VIGE-03-FB-8-5POL -Inputs: 4 -5- pole -175555 -382344 -Dimensions: 42/67/H132 mm -Weight: 0.37 kg

Diesel generator / new and unused Make: Ford Model FDT10200SE Voltage: 230 V and 400 V Continuous power: 7.5 KvA Short-term maximum power: 7.9 KVA corresponds to 9.75 kW Pure Sine Wave: Yes Frequency: 50Hz Starting Method: Electric Volume: 72 dB ATS: No Fuel tank capacity: 14 litres Fuel: Diesel Weight in kg: 168 kg Runtime: 7 hours at 75% load Dimensions (LxWxH): 920 x 520 x 720

Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley -Tires: PU tires puncture-proof 260x85mm -Number: 1 piece car available -Price: per piece -External dimensions: 730/500/H1150 mm -Own weight: 17.5 kg

ATTENTION : The system is currently in operation and can only be purchased AT the END of the year. This is only advertised now in order to find possible interested parties to date. for sale is the central extraction system of a medium-sized company. Extraction volume : 8,33m³/s > approx., 50,000m³/h Power : 37 kW In addition, there are: A fan that sucks in the air Type: DFDG SEE 225S4 Power : 37kW rpm : 1483 Power : 400/690 V Amperage : 65 / 37.5 A Frequency : 50 Hz Ingress protection : IP 55

Refrigeration system from Vektor with 2 fans Year of manufacture : 1996 at the moment unfortunately no further information about the product

NEW ex works Standard equipment - Threading device - Control panel with OLED display - Robust, high-quality drill head hood - LED lighting - Quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drill protection with electr. Hedge - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - in tapping mode: right-left SPECIFICATIONS Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1= M30x3,5 / R2= M24x3 / R3= M36x4 Spindle MK IV Drilling depth: 160 mm Projection: 300 mm Column diameter: 140 mm Usable table area (W x D): 590 x 450 mm Digital speed display Digital drilling depth  ...

Electric motor, three-phase motor -Power: 0.45 kW -Speed: 2815 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Protection class: IP 56 -Number: 2x available -Price: per piece -Dimensions: 230/125/H120 mm -Weight: 7 kg

We are selling here a slicer from the manufacturer Treif, type Falcon in a good used and functional condition. The machine was built in 2008, runs on 380-480 volts, 7.0 kW, completely stainless steel, inlet/outlet conveyor, programmable, touch PC control, workshop tested, immediately ready for use, dimensions W/D/H 460/130/180 cm, others on request.

geared motor, electric motor -Power: 0.6 kW -Protection class: IP 22 -Price: per piece -Quantity: 1 available -Dimensions: 340/260/H240 mm -Weight: 7.6 kg

Air conditioner, air conditioning unit, condensate pump for air conditioner -Air conditioning - Manufacturer: Siccon - Type: Flowatch Design -Dimensions: 935/135/H75 mm -Weight: 1.3 kg

Refrigerant recovery system, vacuum pump for air conditioners, air conditioners, refrigeration units, differential pressure gauge -For use in: air conditioning systems with recovery, CFC, HFC and HCFC -Dimensions: 300/400/H320 mm -Weight: 19kg

CNC drawbar, tool holder, tool holder, milling tool holder - Quantity: 28 pieces -with: ring groove -for: SK50 recordings -Thread: M24 - Price: complete -Weight: 6.8 kg

Level measuring device, sensor, switch, level transmitter -Fill level transmitter -Manufacturer: Endress-Hauser -Type: FTL20-012B -Number: 1x level transmitter available -Price: per piece -Weight: 0.4 kg

Axis control, electronic handwheel, control unit -The electronic handwheel was removed from a CNC machining center make: Hitachi Seiki type: HC400. Other spare parts available. -electronic handwheel for Hitachi Seiki type: HC400 -Dimensions: 170/120/H80 mm -Weight: 0.6 kg

Diaphragm pump, centrifugal pump, water pump, chemical pump -from: Scrubber-dryer, brand Gansow -Flow rate: 8.7 l/min -Quantity: 2 available -Price: per piece -Dimensions: 200/200/H95 mm -Weight: 2 kg

Profile Machining Center Machining length approx. 8,500 mm, max. profile size 300 x 200 mm, Travel XYZ = 9,300 x 1,000 x 800 mm, Sawing unit (mitre cuts), 4-axis drilling/milling unit (16 kW, 18,000 rpm), tool changer 24-fold option pendulum operation, option Clamping element displacement, preparation Flowdrill, , safety enclosure, BECKHOFF control panel (programming software CamQuix), refrigeration unit IDEA 16CCM-50-A-F-3 (No. C2019010009, year of construction 2019), Control cabinet, machine under power in production use Original price 176.500 EUR

used DC shunt motor 18 kW Anchor voltage 460 V 45 A 3000 rpm with filter fan and tachogenerator can be installed as B3 or B5 Collector and carbon brushes top

Servo Amplifier Module, CNC Control System, plug-in card, -Control unit comes from a Hitachi Seiki HC400 machining center -Manufacturer: FANUC -Type: A02B-0094-B502 -with: 7x plug-in cards -Dimensions: 560/400/H255 mm -Weight: 12.2 kg

table length: 600 mm table width: 400 mm x-axis: 400 mm y-axis: 300 mm z-axis: 350 mm workpiece sizes: 900 x 630 x 350 mm volume: 490 L total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Syspal 600HA2 Eurobin wash frame 2021, stainless, SWL 50Kgs, 3Ph