f k used for sale

Geared motor, electric motor, electric geared motor -Engine: FIMEA type LR 63B4 -Gearbox: 150 rpm, with oil level indicator -Power: 0.18 kW -Voltage: 220/380 volts -Hollow shaft: Ø 19/80 mm -Protection rating: IP54 -Dimensions: 165/140/H320 mm -Weight: 7.4 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNC-40-50-PPV -Stroke: 50 mm -Piston:Ø 40 mm -Piston rod: Ø 16 mm/M12 x 1.25 -Price: per piece -Number: 4 Stück -Dimensions: 213/53/H87 mm -Weight: 1.2 kg/piece

Three-phase motor, electric motor -Power: 1.9 kW -Speed: 2800 rpm -Shaft: Ø 18 x18 mm -Construction: B14 -Protection class: IP54 -Dimensions: 355/115/H150 mm -Weight: 15 kg

Electronic cables, extension cables, electronic wires -Manufacturer: Draka Comteq, data cable -Type: UC2000 B_A 4G50/125 FRNC -Length: 130 m -Price/Sale: complete -Roll dimensions: Ø 500/330 mm -Weight: 20 kg

Conveyor Belt, Belt Conveyor Belt, Conveyor Belt, Belt Conveyor, Chain Conveyor, Pallet Conveyor Belt, Pallet Conveyor -Drive: geared motor SEW-Eurodrive with brake 0.55 kW/15 m/min -Weigh cell: Bizerba HLC-C3 -Chain track width: 750 mm -Dimensions: 1995/990/H480 mm -Weight: 334 kg

Used bread press FORTUNA, automatic size 4 -Refurbished- - Fully automatic bread roll press - 30 troughs per plate - Weight range: 40 - 110g - for 3.300g dough total - incl. new stainless steel knives - automatic head - with effective cut-off (only cutting - no rounding) - Condition: very good, ready for immediate use - 6 months warranty - Video on request The machine has been completely overhauled and is in very good condition. A visit is of course possible by arrangement.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Relay, contactor, semiconductor contactor, contactor, coupling relay -Manufacturer: Finder, coupling relay -Type: 38.51.0.240.0060 60 volts -Number: 1 boxes with 10 pieces of relays each -Price: per box -Dimension: 65/90/H80 mm -Weight: 0.3 kg/box

Accident Protection IR Light Barrier Type4 Year of construction unfortunately unknown. Installation Reach : 2000mm Obstacle : Ø 40mm Supply, degree of protection and all other information can be found in the attached pictures. Yours sincerely,

I sell the Flader Orbitalbuerstmaschine. Model Quickwood Fladder System Working width 1060mm. Mechanically adjustable rotazion and feed speed. Cheap for rustic bushes and patina surfaces. Profiles possible. Made in Denmark Hansen - Hundebol AS

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Forst-Enor, switching pump RSWV40 -Motor: AEG -Power: 4 kW -Speed: 1420 rpm -Delivery rate: 40 l/min -Dimensions: 2000/455/H500 mm -Weight: 156 kg

Optical fiber, connection technology, EFO units, illuminator -Manufacturer: Fiberstars, EFO-1 1 Illuminator -Power: 68 W -Price: per piece -Number: 4 Stück -Dimensions: 340/510/H165 mm -Weight: 4.7 kg/piece

NC Rotary Table Brand FIBRO, type 11.13.6.15.5.11.11.4.0120 T2 Diameter 800 mm Height: 240mm The indicated retail price is net.

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240T -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1290 mm -Weight: 4.9 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1230AOLSF5090 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1240 mm -Weight: 5.1 kg

Weibert FS32 Dressing thickness planer Planer width: 320mm Planing shaft: 3-reversible knife shaft Motor power: 3KW n=4500U/min, 400V Passage height: 4-225mm Side stop WJ-300100 OPTIONS AT EXTRA COST: Professional dressing stop Long-hole drilling equipment Wescott Chuck 0-16mm Driving equipment Digital height adjustment Dressing table extension adjustable 750mm Drive motor 4KW S1

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx1350AOLSF5045 -Hydraulic hose: HD240T 90 BAR -Dimension: Ø 60 x 1350 mm -Weight: 5.2 kg

Tapping machine, pipe thread cutter -without tools -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm -Weight: 64 kg

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, sorting belt, sorting conveyor belt, readout conveyor belt -Side walls made of: stainless steel -Speed: 118 m/min -Drive: 0.75 kW -Belt width: 590 mm -Length: 2000 mm -Transport dimensions: 4360/1170/H1170 mm -Weight: 684 kg

First commissioning: 2016 Control: Heidenhain iTNC 530 incl. handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 min-1 Torque: 95 Nm Tool holder: HSK 63A Tool tensioning: hydraulic Coolant supply: outside and inside Blowing air: Outdoor Drives Linear axes Feed speed X-, Y-, Z-axis: up to 60 m/min Axle acceleration X-, Y-, Z-axis: up to 5 m/s2 Connection data Connected load: 190 kVa Fuse: 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Colour Housing, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green  ...

Three-phase motor, electric motor -Transfer: in the current condition as seen -Slight damage: on the fan housing -Power: 1.9 kW -Speed: 2800 rpm -Shaft: Ø 18 x18 mm -Construction: B5 -Protection class: IP54 -Dimensions: 360/140/H150 mm -Weight: 16.7 kg

bar material dia.: 65 mm bar length: 3000 mm voltage: 400 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 5,32 x 0,95 x 1,52 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection moulding. The machine’s high-performance components significantly enhance any, even the most intensive, machining process. These include an electric drive, which, compared to a hydraulic drive, offer ...

Faceplate, faceplate chuck, four-jaw chuck -without: screw-on jaws Manufacturer: Forkardt -Mouth size: Ø 610 mm -Cone holder short cone: 8 (139 mm) -Weight: 121 kg

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic hose -Hydraulic line: Hansa-Flex PHD240Tx2180AOLAOL45 -Hydraulic hose: HD240T 90 BAR -Price: per piece -Number: 2 pieces -Dimension: Ø 60 x 2020 mm -Weight: 7.1 kg/piece

Inductive sensor, electronic sensor -Pepperl Fuchs Part No.: 187480 -Dimensions: 245/225/H45 mm -Weight: 1 kg

Measuring device, measuring device, measuring machine, -Manufacturer: Fagor, position measuring system -Type: R NCT 13-005 3071 11A -Measuring scale: up to 2030 mm -Glass scale: 2070 mm -Dimensions: 3390/355 / H230 mm -Weight: 123 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Festo, standard cylinder type DNU-80-570-PPV-A -Stroke: 570 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm/M20x1,5 -Price: per piece -Number: 2 Stück -Dimensions: 840/95/H95 mm -Weight: 7,6 kg/piece

table diameter: 800 mm table load: 6 t table height: mm weight of the machine ca.: 950 kg NC rotary table make FIBRO type FIBROPLAN Ø 800 mm rotary table with increased geometric accuracy with 8 star-shaped T-slots 18H8 according to DIN650 with centering hole Ø40H6 mounting height 250mm total ratio 1:600 direct measuring system ROD880C/36000 weight approx. 950 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Axial groove ball bearings, axial groove ball bearings, axial ball bearings, axial bearings, axial spherical roller bearings -Condition: Original packaging -Manufacturer: FAG, Type 507122 -Outer diameter: 380 mm -Overall dimensions: Ø 380 x 125 mm -Weight: 37 kg

We sell here a vibrator / portioner from the manufacturer ISO-FLO, type MVIFD in a very good used and functional condition. The machine is built in 2004, runs on 400 volts, completely stainless steel, filling surface W / D / H 60 / 140 / 20 cm, workshop tested, immediately ready for use, dimensions W / D / H 200/90/75 cm, more on request.

SPECIFICATIONS: Automatic drilling and dowel insertion machine with horizontal loading and unloading system, consisting of: Loader: ESSEDUE CNC transverse drilling machine: Biesse FTT Year of construction 2003 4 upper drill heads with automatic change of vertical drills 2 X-axes 4 Y-axes 4 electrospindles with automatic tool change A total of 12 slots for tool changes Inline transverse plate turner for double-sided drilling CNC transverse drilling machine: Biesse FTT Year of construction 2004 2 upper drill heads with automatic change of vertical drills 1 X-axis 2 Y-axes Biesse FHT Transversal Drilling and Dowel Insertion Machine Year of construction 2004 High pressure bonding system: Csnpgoz93 5 + 5 injectors Large vibrating baskets with dowels ESSEDUE unloader with additional transverse outlet for individual panels

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type EAK 80.1/2-FK14 -Power: 0.4 kW -Speed: 2910 rpm -Shaft: Ø 19 mm -Construction: B3 -Number: 3x motor available -Price: per piece -Dimensions: 300/180/H210 mm -Weight: 9.5 kg/pc.

Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...

You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. Laser welder LWH-2000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual pla ...

Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM-25-50-PA-GF -Piston: Ø 25 mm -Stroke: 50 mm -Max. pressure: 10 bar -Number: 4x cylinders available -Price: per piece -Dimensions: 135/95/H45 mm -Weight: 1.6 kg

Inductive sensor, electronic sensor -Pepperl Fuchs Part No.: 203091 -Price: per piece - Quantity: 4 pieces -Dimensions: 150/45/H50 mm -Weight: 0.2 kg/piece

Inductive sensor, electronics sensor -Pepperl+Fuchs Part No.: 187481 -Price: per piece -Number: 5 pieces -Dimensions: 80/50/H50 mm -Weight: 0.2 kg/piece

Brochure production Nagel Foldnak 8

Floor oven Friedrich E6 8/6 bakery oven - 6 floors each 80x60 cm - each floor can be controlled separately with bottom and top heat - each floor with separate steam box - each floor with glass viewing glass - with exhaust hood incl. fan -digital control - Floor flaps are made of glass (visible) - Floor entrance height approx. 12.5 cm - Exhaust hood protrudes 22cm at the control - per floor 3,3kw all together 19,8 kW

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg

Power resistor, wire potentiometer, resistor, braking resistor, solid tube resistor -Manufacturer: Frizlen, power resistance -Type: FZDPQ 200x35 -Power: 450 W 4.0 ohms -Dimensions: 250/140/100 mm -Weight: 1.7 kg

Transport container winter service, for spreader, salt spreader, salt container, grit container, -Filling device: for road salt, fertilizer, for hand spreader -Bank: made of stainless steel -Transport frame: made of galvanized steel tube -Transport dimensions: 1800/1400/H1265 mm -Weight: 250 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Festo, Standard cylinder type DSN-12-160-P -Stroke travel: 160 mm -Piston: Ø 12 mm (1.13 cm²) -Piston rod: Ø 6 mm/M6 -Dimensions: Ø 20 x 265 mm -Weight: 0.145 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Festo, standard cylinder type DSNU-20-25P-A -Stroke travel: 25 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm -Price: per piece -Quantity: 6 pieces -Dimensions: Ø 36 x 160 mm -Weight: 0.2 kg/piece

Wire electrode, welding wire, welding wire, cored wire -Manufacturer: Bohler, started role inert gas wire electrode -Type: AVESTA Cored Wire FCW-2D 316L/SKR O 1.2 mm -Dimension: O 300 /100 mm -Weight reel: 11.9 kg

Pneumatic cylinder, air cylinder, standard cylinder, guide unit -Manufacturer: Festo, guide unit -Type: FEN-50-0250-KF -Stroke: 250 mm -Bore: for piston Ø 40 mm -Price: per piece -Number: 1 piece -Dimensions: 437/135/H70 mm -Weight: 4.7 kg/piece

Guide cylinders, pneumatic guide cylinders, pneumatic cylinders, compact cylinders -Piston diameter: 16 mm -Stroke: 40 mm -Max. pressure: 10 bar -Dimensions: 105/65/H35 mm -Weight: 0.5 kg

turning diameter: 520 mm turning length: 1500 mm control: Fagor total power requirement: 15 kW weight of the machine ca.: ca. 3,5 t dimensions of the machine ca.: L/B/H 3,50x1,50x180 m more info to follow The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.