f k used for sale

Name: AC Servo Motor Manufacturer: FANUC (Japan) Type: Model αM9/3000, A06B-0163-B010#0001 Country: Japan Short description: FANUC model αM9/3000 compact AC servo motor with a rated power of 1.8 kW, 3000 rpm, voltage 161 V, 3-phase, with integrated encoder. Typical black housing body with red junction box. Robust design for industrial CNC machines. Used condition, mechanically in order, with visible signs of wear

Name: AC Servo Motor Manufacturer: FANUC (Japan) Type: Model αM6/3000, A06B-0162-B110#0001 Country: Japan Short description: FANUC model αM6/3000 compact AC servo motor with a nominal power of 1.4 kW, 3000 rpm, voltage 144 V, 3-phase, with integrated encoder. Typical black housing body with red junction box. Robust design for industrial CNC machines. Used condition, mechanically in order, with visible signs of wear. Price excludes VAT.

Offer 25223 Technical data: ( non-binding ) - Test panel for wall mounting with various test equipment - Space requirements W 600 x H 850 x D 300 mm - Weight 40 kg

TECHNICAL DETAILS Travel X x Y: 4000 x 2000 mm Cutting range X x Y x Z: 4064 x 2032 x 70 mm Workpiece weight: 1270 kg Positioning speed per axis / simultaneous: 100 / 140 m/min Axis acceleration: 12 m/s² Position accuracy: ±0.1 mm Repeatability: ± 0.05 mm Edge Detection Accuracy: ± 0.5mm Table: Interchangeable table system Laser Source: Fiber 4000 Power: 4000 W Wavelength: 1μm Polarization: unpolarized Pulse Rate: 1 - 2500 Hz Sheet thickness steel: 20 mm Sheet thickness aluminium: 15 mm Sheet thickness stainless steel: 15 mm Sheet thickness copper: 8 mm Sheet thickness brass: 8 mm MACHINE DETAILS Dimensions: 12.9 x 6.75 x 2.5 m Weight: 15 t Power: 25 kW Switch-on time: 23,477 h Laser switch-on time: 5,248 h

Key data: 520 mm, 3000 mm, 4 St.

SPECIFICATIONS: 2 work tables Dimension of the two tables: 3000 x 520 mm Roller with 4 knives RPM: 5000 RPM Installed power: 4 kW

Mobile jib, Weight of the gallows (kg): 190 , load capacity (kg): 120 , Dimensions (mm): 1645x800 H 1970, Max height (mm): 1620, Gap dimensions (mm): 670, Minimum spacing dimensions (mm): 310

FIve Axes Machining Centre C.B.Ferrari B18 - 18.000 rpm - Capacity 1450x520x420, CNC Elexa E560, Automatic Head +/- 90°, cnc rotary device, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2000x580 mm, Longitudinal travel x axis: 1400 mm, Cross travel y axis: 520 mm, Vertical travel z axis: 420 mm, Rapid feed x-y-z axes: 15000 mm/1, Spindle taper type: V40, Working feed x-y-z axes: 0 - 15.000 mm/1, Spindle speed: 18000 rpm, Spindle motor power: 24 Kw, Automatic tools change nr.: 60, Cnc: ELEXA E560, Approx net weight: 10.000 Kg, Accessories: Dividing device, laser BLUM, coolant thrugh spindle, chip conveyo

T-Type Boring Machine SAN ROCCO - FMC 110 CNC - Spindle Ø 110 mm, capacity 2100x1600x1600+600 mm - CNC HEIDENHAIN TNC 426, ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï»¿ï» ¿ï»¿ï»¿ï»¿, Information about technical data are not binding., Machine available subject to prior sale., Rotary table dimension: 1300x1100 mm, Maximum table load: 3.000 Kg, Cross travel x axis: 2100 mm, Vertical travel y axis: 1600 mm, Longitudinal travel z axis: 1600 mm, Longitudinal spindle travel w axis: 550 mm, Working feed x-y-w axes: 2 - 10.000 mm/1, Rapid feed x-y-w axes: 10.000 mm/1, Spindle taper: 50-DIN2080 ISO, Spindle speed: 5 - 3000 rpm, Number of spindle speeds: 2, Spindle motor power: 25 Kw, Cnc: HEIDENHAIN TNC 426 CA, Weight: 17.000 Kg, Accessories: Coolant thrugh spindle, external perimeter guard, CE Mark

Bending Machine FEMAS PI 30.45 - 3000 x 45 t. - NC ESA 400, Information about technical data are not binding., Machine available subject to prior sale., Capacity: 450 Kn, Bending lenght: 3050 mm, Distance between shoulders: 2550 mm, Throath depth: 350 mm, Approach speed: 50 mm/s, Bending speed %smm/s: 10 mm/s, Return speed: 68 mm/s, Backgauge type: Motorized, Backgauge travel: 500 mm + R, Cn: ESA TRIA KLT 400 (3 axes), Main motor power: Kw 5,5, Weight: 5.500 Kg, Accessories: Tool set

The used Fraunhofer sorting system from 2007 is ideal for removing bad parts from bulk materials such as dry and shredded plants. The system uses a color-capable line camera that scans 20 million pixels per second. This enables precise detection with a conveyor belt width of 500 mm and a speed of 2.5 m/s, with 16 pixels per mm² being recorded. The continuous display of the bulk material image shows color-coded bad parts, and the system is intuitive to operate. Defective parts are blown out approx. 100 mm behind the measuring line using air nozzles. In 2019, the system was optimized by replacing the camera, control cabinet and valve block. The system has an output of approx. 60 to 160 kg per hour, depending on the product.

pitting plate for cherries 21-12,, Original Ferrum plate,, 108 holes,, outer diameter: 21 mm,, inner diameter: 12 mm,, very good condition.

Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo

Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo

More info soon

Mobile inclined conveyor belt, compact and mobile on wheels.

STC conveyor belt, In-feed belt, Dimensions are in the photo album

STC in-feed conveyor belt, Measurements are in the photo album

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...

TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...

grinding diameter: 120 mm centre height: 100 mm : Stirnschleifeinrichtung : Kein Typenschild auffindb The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the shelf: Shelving system: SSI Schaefer Type: R 3000 The scope of delivery includes: Shelves, used Material colour: sendzimir galvanised Total width: approx. 1,295 mm Total depth: approx. 790 mm f. Stand depth: approx. 800 mm Height: approx. 40 mm Number of beams: 02 pieces Weight / piece: approx. 12.82 kg Currently available in stock: 1338 pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Chevalier FSG-618M Worklength with magnetic table: 457 mm Grindingwidth: 152 mm Dimensions of the table: 460 x 150 mm Distance between table -- spindlecentre: 450 mm Max dia grindingstone: Ø 205 × 12.7 × Ø31.75 mm Spindlespeeds: 2850 rpm Motorpower: 1,5 kW Length: 1900 mm Depth: 1400 mm Height: 2130 mm Weight: 674 kg

Electrically heated process vessel capacity 90 litres Filling device Manufacturer: Haas Type FMSX composed of: Electrically heated agitator tank with a capacity of approx. 90 litres Heated Mouvex piston pump, electric heater, control cabinet with Siemens PLC and FU for pump and agitator, in a mobile stainless steel frame.

Mains filter Schaffner FN351-80-34 from STAMA MC325/S Type:Mains Filter Manufacturer:Schaffner Model No.:FN351-80-34 Used in:STAMA MC325/S Short Description:3-phase mains filter for industrial applications, compact design, 80 A rated current, screw connections. Good used condition, fully functional. Price excl. VAT

FIMIC RAS+REF 400 FULLY AUTOMATIC SCREENCHANGER, screening area 1.206cm², for PP / LDPE / LLDPE / HDPE / PS / EPS / ABS / PVB, possible setting as : continuous scraping OR scraping on an Amp.threshold OR backflush, it was mounted on extruder producing 800 kg/h with 100-150 my screening, Always used as RAS (REF equipment brand new), 30 kw drive, totally checked in 2024 by constructor, Immediately available, remote connection (Industry 4.0) with pressure control system from pulpit, 4-5 spare laser filters available, multipolar plug connectors, We can supply spare screens for this machine., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, ---------------------------------------------------------------------- -----------------, SEE ALSO OUR[OTHER FIMIC SCREENCHANGER](.germanplast/listings?q=GEMA100), installed power - used power ...

A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible.

Key data: 3048 KW, 1500 1/min

JMS 620 F28 3048 kWe – F11 3350 kWe overhauled genset including: - completely factory overhauled engine (12 month Innio warranty) - new turbochargers - overhauled, renewed (L4 inspection) alternator (AVK or Leroy sommer) - new plate heat exhangers - new valves, water pumps - renewed base frame - overhauled intercooler - new pressure transmitters, sensors, cables, spark plugs - new relais, sockets, revised, tested I&C components Diane Xt4 / Safi2 system - renewed gas train Engine can operate on biogas or Natural gas EXW

Brand: LTMG Model: FD40 Year of Make: Unused, 2025 Serial Number: On request Operating hours (read) 3 Engine brand Xinchai Engine model A495BPG Fuel Diesel Dimensions LxWxH (mm) 2890 x 1410 x 2195 Weight (Kg) approx. 4720 Quantity in stock 2 Drive (state in %) 100 Capacity (Kg) 4000 Max. working height (mm) 3000 Drive-through height (mm) 2195 Made in China Comments Unused 4000 kg diesel forlift, duplex mast, competitive price offer!

Solenoid valve Festo JMFH-5/2-D-1-C STAMA MC325/S Type: Solenoid Valve Manufacturer: Festo Model No.: JMFH-5/2-D-1-C Pressure range: 2.1–10 bar Condition: Used Dismantled by: STAMA MC325/S Dimensions: 150×130×120 mm Weight: 0.95 kg Price: (plus VAT)

Spiralbindemaschine - Spiral binding machine FOELL 33

Lagenfalz- ud Heftmaschine / Bookletmaker Nagel Foldnack M2

pneumatische Ösenmaschine / pneumatic Eyeletting machine Falzoni F401.9.S21

Blockrückenfräse (Einkerbmaschine) - Block Back Cutter and Notching machine

Number:: 012005057812 control: Siemens Sinumerik 840 Tool changer: 24-fach Axles: 3 Miscellaneous:: mit Späneaustrag Miscellaneous:: CPU ist defekt The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Numbering units Leibinger Gradsteller / Quersteller / Forwards / Backwards xx099-1 Numbering Units Leibinger Gradsteller rückwärts / straight Backwards xx099-2 Numbering Units Leibinger Gradsteller vorwärts / straight Forwards xx099-3 Numbering Units Leibinger Quersteller rückwärts / convex Backwards xx099-4 Numbering Units Leibinger Quersteller vorwärts / convex Forwards

Number:: 941264 control: Fadal CNC 88 HS Tool changer: 21-fach Axles: 3 Miscellaneous:: mit Späneaustrag The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A semi-automatic Siat pallet wrapping machine is available. Turntable diameter: 1500mm, max. wrapping height: 2500mm, load capacity: 2000kg, machine dimensions X/Y/Z: approx. 3800mm/1500mm/2400mm. Including a supply of wrapping film. Documentation available. On-site inspection is possible.

Bystronic Bysprint 3015 Fiber 4 KW Working area : 3000mm x 1500mm With interchangeable table Laser on: 21,000h Including Airco nitrogen generator at call

Steaker / Meat Cutter / Strip Cutter Manufacturer: EDERTAL / Type: FM 35 Specifications: 400 V / 50 Hz / 1.05 A Year of Make: 2017 Weight: 32 kg including 3 mm strip cutter insert Function checked, machine ready for use Stock machine, immediately available! Condition, see original pictures!

Key data: 300 mm, 150 mm, 300 mm

Universal Milling DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Spindle speed: from 40 to 2000 RPM Table size: 600 x 210 mm Horizontally tiltable head Straight table Spindle motor: 2 speeds Motor: 1,3 kW Feeds: X - Z auto / Y manual Voltage: 380 V Width: 1200 mm Depth with electrical panel: 1200 mm Height:1600 mm Weight: approx 900 kg

Stock# U2464-1 Used dissolver by Diaf A/S (DK) model FFBH49EX. Has single stainless steel shaft with working length 700 mm. Shaft is belt driven by el motor 37 kW, 1475 rpm, 380 V, 50 Hz. Dissolver has toothed disc with diameter 410 mm and side wall scrapper with teflon blade, driven by el motor 1.1 kW and reducer. Working rotation of shaft adjustable by hydraulical change of pulleys diameter (hydraulical drive power 0.12 kW). Rising and lowering of agitator in range 109 cm - hydraulical - pump motor with power 1 kW. Machine has local control panel and electric cabinet.

We are offering a fully equipped machine workshop for sale, which includes the following equipment: 1. Machinery - MIKRON VCE 800 Pro Machining Center - LAGUN FCM 152 Milling Machine - CMZ TBI-450 CNC Lathe - PINACHO A 70 Conventional Lathe - PUSKAS PKM 10-S-500 Compressor - PUSKAS PLX-9 Dryer - SUPERLEMA Ø200 Grinder - CDM 210 Horizontal Bandsaw 2. Tools - HSS Drill Bits Ø1 to Ø35 - MD Drill Bits Ø1.5 to Ø20 - HSS Reamers Ø3 to Ø25 - Coated HSS Milling Cutters Ø2.5 to Ø25 - MD Milling Cutters Ø1 to Ø20 - D’ANDREA Boring Heads – Precision 0.002 mm (2 units) - Planer and Squaring Chucks Ø12 to Ø80 - Tool Holders for CNC & Conventional Lathes - Milling and Turning Inserts - Metric & Whitworth Thread Taps and Dies 3. Clamping Systems - ARNOLD MB 125 Vises – Precision-Ground (2 units) - ISO 40 Taper Collet Holders (DIN 69871) - ISO 40 Chuck Holders - Weldon System IS ...

Manufacturer: FINN Model: POWER LP6 Year of Manufacture: 2007 Working hours: 21,500 available : immediately Find more here - / Contact us at -

Milling machine DECKEL FP3 - 500x300x400 mm, DRO, Information about technical data are not binding., Machine available subject to prior sale, Working table size: 800x420 mm, Longitudinal travel x axis: 500 mm, Cross travel y axis: 300 mm, Vertical travel z axis: 400 mm, Spindle taper: 40 SK, Spindle speed: 40 - 2000 rpm, Number of spindle speeds: 18, Spindle motor power: 3 Kw, Quill spindle travel: 100 mm, Working feed x-z axes: 5 - 500 mm/1, Rapid feed x-z axes: 1.500 mm/1, Number of working feeds: 18, Weight: 1.200 Kg

Manufacturer: FINN POWER Model: LPe5 Year of Manufacture: 2002 Work area: 2500×1250 mm (+ repositioning) AVAILABLE: immediately Find more here - / Contact us at -

SCM steep conveyors for transporting the glazing beads after the outlet of the SCM window system. The stone conveyor is 2.60 m. high with a 6 m. conveyor belt to transport a miter glazing bead saw The size is: 2.20 wide x 2.60 high with 1.20 feet made in stainless steel. Motor 7.5KW due to start-up The conveyor belt is 6.50 m. long x 100 mm wide in the channel.

Offer 24338 Drawer cabinet with front door Specifications: - 1 lockable front door, 1 key available - 2 pull-out wheel-bearing drawers - 2 pull-out pull-out shelves / platforms - Load capacity of the drawers + shelves each approx. 100 kg - Pull-out of drawers + shelves 80% each - Platform dimensions approx. W 430 x D 610 x H 270 mm - Drawer dimensions W 450 x D 610 x H 50 mm - Front door in front of the pull-out shelves / platforms - Space requirement approx. W 580 x H 880 x D 700 mm - Weight approx. 80 kg

charge load: . Diameter: . mm Diameter: Bechälter 1700 mm serial number: MP-70-3-4-99-A1 : 5221 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: . : . diameter: . mm serial number: MP-70-3-4-98-A1 Job No.:: 4813 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The LAGUN FTV2 multi-purpose milling machine is a versatile machine tool that can be used in both single-part production and small-batch production. It impresses with its robust design, precise machining and a long service life. Equipment: - Manual and automatic operating modes - Fagor three-axis digital position indicator (DRO) - Coolant system - Lighting at the work area Condition: - The machines are in good technical and visual condition. Specifications: Longitudinal feed manual/automatic (X): 830/745 mm Transverse feed (Y): 406 mm Vertical feed (Z): 406 mm Drive power spindle: 3.7 kW Spindle cone/milling head mount: ISO 40 Spindle diameter: 85.70 mm Capacity: 127 mm Distance from spindle machine min./max.: 165/735 mm Spindle speed: 60 - 4,200 1/min Table size: 1,270 x 254 mm Max. table load: 200 kg T-slots: 3 x 16 T-slot spacing: 63 mm Weight: 1,100  ...