f k used for sale

111

CONVEYOR BELT CONVEYOR BELT, FEED DIRECT FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -Stable conveyor belt / conveyor belt for many applications in industry, agriculture, wood u.v.m. with textile plies, coated on one side, underside of fabric! -New, endless welded, 2-ply reinforced, with Central wedge guide rail on the underside, grooved profile 8 mm x 12 mm wide! -Dimensions: 7480 mm x 300 mm width x thickness mm 2 with 26 piece PVC T studs 30 mm high x 240 mm long (edge distance 30 mm each), obliquely set, -Band will be shipped with UPS! On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Not is your de ...

Of used filter cake-cerium-smaller impulse: Springs a filter cake-cerium-smaller exists of two mutually running knife waves they chop up the filter cake.

Of used filter cake-cerium-smaller a filter cake-cerium-smaller exists of 2 mutually running ones knife waves. according to medium a filter cake comminution at approx. 50-mm grain size can be reached.

The frames and skin are in a good, very good condition. Parts with new finply. 40x Framax 1,35x2,70m 22x Framax 0,90x2,70m 8x Framax 0,60x2,70m 8x Framax 0,45x2,70m 8x Framax 0,30x2,70m 10x Framax 0,90x2,70m Uni 4x Framax Insidecorner 2,70m 4x Framax Outside corner2,70, 312x Framax RU Clamp 20x Framax Universal fixing bolt10-16cm 24x Framax wedge clamp 12x Framax Universal walling 0,90m 12x Framax Universal walling 1,50m 20x Framax bracket 90 5x Panel strut 340 2x Framax lifting hook 210x tie rod 1,00m 420x super plate 15 2x Doka Box 1,20x0,80m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All t ...

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

We have 2 pieces control cabinet fans from Rübsamen & Mr Type: LS0, 20W, 0.14 A and 230V the dimensions are 240 x 240mm, one fan is unused = 12,-€ and one was briefly in use = 10,-€

Cut fat capacity 200 L

Multiple filters of layers of make Didier Filtertechnik with double jacket to the heat, explosion-proof, mobile, closed system, operating temperature up to 200 ° C

1. BUILT: 1995, MIDI, STRIP WIDTH: 800 MM, THICKNESS: 0.006-0.020 MM; 2. VEB, BUILT: 1972, FOIL WIDTH: 670 MM, THICKNESS: 0.007 - 0,014 MM

THICKNESS: 0.014 - 0.030 mm, DOUBLED FOIL THICKNESS: 0.028-0.060 MM;

AIR TEMP.: 600 °C, 2 CHAMBERS, SLAB DIM.: 1.54 x 3.0 x 0.35 M - W x L x T

C3 ultra fast blow fuse, 450A, for power electronics. Original new condition welded from clearance, fully functional. 420-all 3 units net price 155.- Info under 0170 / 2204056 Mail to fa.raupp@t-online

Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin.

Frequency converter Mitsubishi Freqrol A200, 15/18,5 KW - mint condition Manufacturer: Mitsubishi Electric Type: FR-240-E-15K-EC Technical data: 15/18,5 KW Input: 3PH AC380-415V 50/60Hz Output: AC380-415V, 0.2-400Hz, 15/18.5 KW 31/34A With manual, without control panel, if you need one, this can easily be purchased on Ebay. Attention! We have set the market lowest price for the part. We have more, but the amount is ending. We carry other frequency converters at very reasonable prices. Buy more than 1 piece, there is still a great discount. Mint condition! The part was bought from a spare parts warehouse of a company, was there for several years in the warehouse but was never in operation. We give you a functional guarantee for 6 months. Should the unit fail, we will replace it with a new one or refund the purchase price.

FUJI PROOFGERAET PICTROSTAT 400 D Built in 2001 Manual is available. Inks and papers are also available The former Nettoneupreis DM 63.900,00 General Fujifilm Pictrostat 400 d With the 400 d Fujifilm Pictrostat, Fujifilm presents its digital full color copier for prints up to format DIN A3. By combining the functions of the High-performance digital printer Pictrography and the copying of his little brother Pictrostat 300 Pictrostat 400 d was launched very successfully in the German market. As also the Pictrography, Pictrostat 400 d with the Thermoentwicklungs-works and -transfer process, which completely without chemicals comes out and basically like a Image separation works. Only water, light, heat, pressure, become the processing Need photo paper and the donor paper developed by Fujifilm. This eco-friendly Method to produce prints in photo quality has ...

Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.

To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are choiceable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Vortex Flowmeter 8800, F020SD1N3D1I1M5, Rosemount, EEx, new Manufacturer: Rosemount Type: Vortex 8800, F020SD1N3D1I1M5 Ex protected Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

folder creaser gluing machine double crease head, 1 head to use for perforation as option 3 folding pockets + gate fold glue system Format 50x100cm up to 480 grams machine very well suited for covers with flaps, heavy stock gate fold brochures etc optional pocket folding possible MHGraphics is Fidia dealer. we can organise installation and instruction by trained mechanic Available: immediately/sofort

Candle filter of company Seitz-filter-Werke Serial number: 1988 Type: S000-31 H 07 DN 100 Year of construction: 1991

Delivery time: 2 weeks Length: 350 mm Width: 470mm Height: 480 mm Capacity: 8 litres Weight: 20 kg Kw: 0.1 Operating instructions: german Description Pastry filler of manufacturer IZO is an electrical machine for dosing and injection of cream and jam. The machine is designed for professional use in bakeries and pastry shops. -Digital Control Panel - cooler - automatic time dosage

Robopac film stretching machinePlatform Ø1500 mmMax pallet size 1200x1200 mm.Max load 1500 kg.Max height 2200 mm.Includes ramp for climbing the machine (height 50 mm.)

Stream current meter, 2.0 EM-FIX-800-S0, Camfil / Handte, new -60% Current new price € 3600 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Flow monitor with manually adjustable throttle valve for adjusting the extraction volume. Limit value monitoring and signal when the required extraction air capacity is exceeded or not reached. - Air volume 600-800m³/h - Connecting flange DN 125 on both sides - length 650mm By measuring the volume flow and optimising the setting, high savings in maintenance ...

Food Pack machinery / flow pack machine. The machine is designed for wrapping various products for food industry products or other non-food products in film. Manufacturer: Food Pack Machinery SRL Italy Type: Leonardo 700 Year of production: 2010 Control from the color touch screen panel Max film width 700 mm Dimensions: Length 6160 mm, Width 1390 mm, Height 1860 mm Weight: 600 kg Electricity: 380 v., 50 Hz, 6.4 kW Without need: 6 bar Packaging film: Polyethylene The width of the machine's packaging tunnel can be changed according to the width of the wrapper (film) with a handwheel and a digital display. The height adjustment works the same way. The machine is in good condition and clean.

FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world’s most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. DESIGN & TECHNICAL FEATURES • Sterilizing c ...

Francis turbine, used 40 kW, 3 m³, height 2m Speed 106 / 375 RPM 69 HP, built in 1963 Generator Schorch GmbH Type KT 7315 s FB01 Z-Z 50 Hz, 512U/min 55kW

Fully reconditioned can filling machine for soft drinks and beer. Machine housing sandblasted and repainted. All seals and parts subject to wear new. Pneumatics and Electronics new (Siemens S7) Canned format: according to customer wishes upto o, 5 l

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

FRICTION BELT FOR SCREW PRESS DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw presses, riveted, new! -Dimensions: 530 mm i. diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide! We confirm best service and short delivery times.

Fuel tank - fuel tank - steel tank - tanks - used oil tank - tank system gas station - home station - storage tank - storage containers - farm service station - steel tanks 50.000 litres content - according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The tank is painted exterior green - no repainting. L = approx. 10.70 m / D = 2.50 m / weight CA. 9,0 tons. / free charged ex works.

GUK Slitting Machine RS 21/760 Technical details: -No double bows, false bows and no risk of mixing! -Insensitive to static charge -approx. 20% cost savings compared to processing batch goods -Automatic control of the cutting position -Synchronous control of the print mark -Installation of code readers additionally possible -Storage in maintenance-free needle and ball bearings -Paper roll on top, single or double roll stand -With and without integrated adhesive table -Drive left or right, with chain or timing belt -Smallest fold 15 mm -With automatic roller changer ARW 21 Specifications: -Min. format: (WxL) 60 mm x 105 mm -Format: (WxL) 210 mm x 315 mm -Roller outer diameter: max. 600 mm -Roll core diameter: Europe 70 mm USA and Japan 76 mm or 152.4 mm or 3 inch or 6 inch -Power: 300/minute, depending on section length -Capacity: For paper roll by. 600 mm, sectio ...

Suction blowers 11 kW approx. 1200 mm direct drive

Industrial freezer down to -40°C TTS 40-944U Fryka Refrigeration Freezer down to -40°C Tyxp TTS 40-944U Manufacturer Fryka Kältetechnik GmbH LED temperature display Electronic control ST100 (membrane keyboard) Alarm equipment Standby switch Current connection 400Volt, 16A Former original price 20.000.-EUR Quote from manufacturer description: "The housing is made entirely of stainless steel sheet. The insulated outer lid is lockable on the handle. In addition to the outer lid with double seal, the interior is closed with PE insertion lids. The lid is fixed to the base housing with folding hinges and is dampened by gas springs when opening and closing. This allows an opening angle of 90°. The insulation between the interior and the housing jacket is made of two-component insulating foam. The evaporator tubes of the chiller are wound around the interior. The inner she ...

NANO FILTRATION PLANTS CAPACITY: FROM 5.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND PRE CONCENTRATION TO 20 % SOLID RATIO FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN

Magurit Fromat 042 eco, frozen meat cutter with manual lift, cutting dimensions up to 480mm x 250mm x 750mm, processing temperature -25°C. You are very welcome to test the machine in our facility in Koblenz, Germany.

Fischerscope XRF X-RAY 5400 X-ray fluorescence - EDXRF spectrometer Year of manufacture 2010 2010/11 has measured with ca-400 hours of operation, only sporadically in a pilot plant (sputtering LEYBOLD) New price: 100.000 € 5400 x RAY X-ray fluorescence - spectrometer (EDXRF) are designed for use in industrial production facilities, specially designed for continuous measurement in the manufacturing process, to the non-destructive analysis and measurement of thin layers and layer systems. For the industrial requirements and continuous operation, they are particularly robust and low-maintenance design.

Output: 40 Cup/Min.Cup size: approx. 110 mm round or rectangular max. 110 mm diagonal. Product: Butter, margarine, salad, etc.

Infrared camera system FLIR ThermaCAM P60 PAL To detect, collect, analyze and document of thermal conditions in industrial and automotive technology needed from business, built in 2004, little used, has in the meantime been calibrated with documentation

Filling height control in beverage bottles

System: piston diaphragm pump Manufacturer: Abel Type: FDG 322 Machine number: 3506 Year of construction: 1989 Performance: 15 m3 Pressure: 15 bar Engine: BBC, 11 kW, 50 Hz

Spare parts from a Fraesmaschine Webo Roeperwerk type Gradumat Table size approx. 12501000mm, complete control Fanuc Y.O.M. 1987 such as board control panel, glass mass staebe, servoverstaerker, motors, ball roller spindles, feed motors, uvw. Price on request No more vertical head. Special price

Duerselen 7-fold drill head; suitable for Duerselen Corta paper drilling machines; was developed for aviation, stapling for flight maps; Abstaende see picture. ; ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

1 used Nordson 24 foot hose, Blue Series, 240V/760W. Built 2013. Nordson part number 274797. 6 pieces available (intermediate sale reserved).

We offer you here Bros. Ice devices of shards of to wireless. If you are interested and for more information we are available.

Antriebswalze 1 Stück / roller 1 piece Eurofold / Foldmaster Manufacturer Number: 235.100.321 Drive roller We offer different versions of rollers for Eurofold 235 / 435 / Foldmaster 200 folding machines Preis ist für eine Walze / Price is for one roller Art.: PS2811 depending on the one we have in the warehouse at the moment. They can be rollers with rubber rings or fully rubberized rollers. Fully rubberized rollers provide good adhesion to the paper and thus better paper transport. After your inquiry we will give you further information. Possible spare part number: 235.100.321 - Drive roller 235.000.889 235.000.888 435.100.001 235.000.887 For FoldMaster, ET numbers: 235.000.523 235.000.524 235.000.522 435.000.109

M. No.: 91-1101

Built in: 2004 Rebuilt: 2017 Equipment: stitching unit for Ferag UniDrum; working condition

Built in: 2004 Equipment: Feeder; working condition

Used Fachboodenregale (a plug-in system) are available for sale. technical data: -Number of frames: 5 -Frame height: 2500 mm -Frame depth: 500 mm -Number of subjects per compartment: 7 -Tray width: 1400 mm -Specialist load capacity: 40 kg -Length of the offered shelf approximately 5800 mm Additional information: A large number of the offered goods available - is now available from stock. Other configurations of racks possible. Price â?¬290 net plus VAT for offered shelf Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.