f k used for sale

Rubber Rolling

We sell 4 x Cisco N9K-C93240YC-FX2 8 x Power supply NXA-PAC-750W-PE V02 (port-side exhaust (blue)) Fans: NXA-FAN-35CFM-PE V02 (port-side exhaust (blue)) 3 x Cisco APIC M3/L3 1 x DEMOB7 Mobile Rack In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used ha ...

New hot-dip galvanized window supports according to DIN EN 1065 á 32,00€/pc net Adjustment range from 96–150 cm Sturdy, durable steel construction Galvanized version for optimal rust protection Ideal for the safe installation and stabilization of window lintels, or for supporting low concrete structures. Quick and easy handling Professional quality for crafts and construction Frame for props new, painted 70,00€ Also available individually! European joint product. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Phone 07305/9562350 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration Court: HRA722943

Inv. Num. : 7724 Type: FD-V8L/FD11 Producer: OTC Created: 2019 Parameters: Accessories: Measurement Wire cutting and grinding Rotary and tilting table Head cleaning station

Used sheeting machine FRITSCH; Type: Rollfix 60/650 E -in bakery condition- - Automatic flour shaker - Automatic reel - storable programs - Multiple degrees of reduction - Freely programmable curve settings - LCD display - Condition: Good, ready to use The machine is in good condition and ready for immediate use. Visits and test runs are possible by arrangement.

1 piece U-shape impact protection Height: 400 mm Material thickness: 4 mm Inner dimensions: approx. 150x145 mm Material colour: yellow-black incl. 6 pieces of ground anchors NEW from Eitorf warehouse

RACING Longitudinal travel of the X-axis mast 16,000mm Vertical travel of the Y-axis head 3,000mm Z-axis head transverse travel 1,250mm Cross stroke boring spindle W axis 700mm HEAD DIMENSIONS 410 X 505mm MANDREL Boring spindle diameter 140mm ISO 50 spindle attachment Spindle rotation speed: 5 – 3,000rpm ADVANCES Continuous working axes X, Y, W, Z 0.5 – 6,000mm/min Fast X, Y, Z axes 18,000 mm/min Rapid W axis 10,000mm/min Working thrust 2,000kg ENGINE POWER: Spindle motor in continuous service (S1%) (AC) 42 Kw Axis feed motors (AC) 50 Nm Auxiliary engines 4.5 Kw Machine in excellent condition.

Working Area: 6000 x 1200 x 3000 (Max Stroke) Max working feed: 8000 mm/min Max rapid feed: 15000 mm/min Fixings: ▪ Indexed head : max rpm: 4000 ▪ Nose: max rpm: 4000 Control: Selca 3045

Zellschneider photovoltaic solar cells. 5000 whole cells from the front per hour. 10000 half cells from behind per hour

Dough sheeter from Fritsch Model Rollfix with reel immediately available in the warehouse in Bielefeld. Pictures are without tapes but the machine is sold with new tapes. - Belt width 64cm - with reel - With digital computer control

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Deck Oven Friedrich E6 8/6 Year of manufacture: 2016 A used deck oven Friedrich E6 8/6 is for sale and is immediately available in our warehouse. Deck Oven Friedrich E6 8/6 Bakery Oven - 6 shelves each 80x60 cm - Each floor can be controlled separately with bottom and top heat - Each floor with separate swath box - each floor with glass viewing glass - With exhaust hood incl. fan -digital control - Shelves flaps are made of glass (visible) - Floor entrance height approx. 12.5 cm - Exhaust hood protrudes 22cm at the control - 3.3kw per floor, all together 19.8 kW

Vertical machining center CHIRON FZ08W 2 pallets 12 HSK32 tools Spindle 15000 rpm HSK-32 rotopallet (2 pallets) CNC Fanuc 21iM chip conveyor The machine is under power in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy, CNC type: Fanuc 21iM, 2 pallets: Yes, Number of pallets: 2, Spindle speed RPM: 15000

Vertical machining center FANUC Robodrill Alpha T14iA ISO30 14 tools 8000 RPM X 500 Y 380 Z 300 CNC Fanuc 16iM The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 500, Y axis: 380, Z axis: 300, CNC type: Fanuc

Vertical machining center FANUC Robodrill Alpha T21iC 2002 ISO30 14 tools 8000 RPM X 500 Y 380 Z 300 CNC Fanuc 16iM The machine can be inspected in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same workpiece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 500, Y axis: 380, Z axis: 300, CNC type: Fanuc

Lapping machine, STAHLI FLM 500, 3-ring lapping machine This machine can be inspected under power in our warehouse Test run possible Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](en.wikipedia.org/wiki/Glass) against a surface such as [iron](en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](en.wikipedia.org/wiki/Cerium(IV)_o ...

Specifications: - Saw blade dimensions 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - Cutting range at 90° around 80 mm - flat 95 x 60 mm - Mitre adjustable up to 45 ° - Material vise - Drive 400 V / 0.5 kW - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg

Key data: 1100 mm, 610 mm, 600 mm

Machine Details Stock-No. 1105-04045 Type of machine Machining Center - Vertical Make FEELER Type VMP 45A Year of manufacture 2015 Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis EX WORK Technical details X-Travel 1100 mm Y-Travel 610 mm Z-Travel 600 mm tool taper BT 40 spindle drive 18.5 kW spindle turning speed range 60 - 10000 rpm tool change unit 30-fold BT 40 tool changing time 4 sec table-size 1200 x 600 mm table load capacity - central/maximum 1100 kp Rapid Travel X/Y/Z 24 m/min feeds x/y/z -stepless 20000 mm/min total power requirement 40 kVA weight of the machine approx. 8 t Additional information CNC control HEIDENHAIN TNC 530 I HSCI MACHINE LIKE NEW complete covering, A.T.C. for 30 tools BT 40 COOLING TROUGHT THE SPINDEL 20 BARS TABLE 1200 X 600 18 KW 10000 RPM

x-travel: 1400 mm y-travel: 630 mm z-travel: 600 mm Control: Heidenhain total power requirement: 15 kW weight of the machine ca.: 5,85 t dimensions of the machine ca.: 1800x630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 3000 mm table load: 25 t total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1250 mm y-travel: 600 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 10000 mm y-travel: 3500 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 workpiece weight: 300 t turning speeds: 1620 U/min spindle taper ISO: 50 One direction thrust bearing: 2 Angle head: 2 power capacity: 76 kW Plate area: 12000x9600 mm Thickness: 450 mm rotary table:: Colgar type: TRT1500 mm table surface area: 2000x2500 mm Table load: 20000 kg Travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Plate area: 109 m² The floor plate and the table are optional and will be charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1400 mm swing diameter: 1600 mm turning height: 1500 mm Control: Siemens type: 840 D Tool changer: workpiece weight: 6500 kg Slide movement vertical: 1000 mm turning speeds: 10-315 U/min Feed: 3600 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: VDI 40 weight: . kg material: . Approx. 49 pieces The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of controlled axis: 6 workpiece weight: . kg throat: . mm Control: System R-J Number of working hours: 38217 h total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 1250 mm control: Siemens type: 840 C swing diameter: 590 mm turning speeds: 3500 U/min Torque: 275/178 Nm spindle passage: 50/65 mm clamping chuck diameter: 250 mm output: 43/28 kw Tool changer: 80 Pos. tool taper: Capto C 4 Turret 12-fold, 12 stations: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Torque: 12 Nm volt: 145 V ampere: 15 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 800 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 table surface area: 3000x800 mm turning speeds: 2000 U/min spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: 16 t dimensions of the machine ca.: 7,8x3,85x3,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 800 mm grinding length: 4000 mm Control: SIEMENS Simatic OP3 grinding wheel diameter: 800 mm spindle speeds: 0 - 70 mm voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm control: Grundig Contour tool taper: SK40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 700 mm z-travel: 850 mm control: Heidenhain TNC 407 taper ISO: 50 Table dimensions: 1950 x 650 mm spindle speeds: 80 - 3000 U7min voltage: 400 V total power requirement: 23 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1300x650 mm Working height: 350 mm 0: . mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5300 mm y-travel: 3300 mm z-travel: 1300 mm Table load: 50000 kg column daylight: 2600 mm workpiece height max.: 1700 mm Table dimensions: 5000x2000 mm control: Heidenhain type: ITNC530 : angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12000x6000 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 65 t throat: 370 mm stroke: 29-151 mm no. of strokes: 50 Hub/min ram - range of adjustment: 80 mm table surface area: 1300x700 mm ram surface: 1000x600 mm hole in the table: ¦ 110 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1700x2000x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 275 mm stroke: 8-120 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 85 mm hole in the table: 220x100 mm table surface area: 750x540 mm ram surface: 400x260 mm table height: 820 mm tool hole in ram: Ø 50 mm total power requirement: 7,7 kW weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 1500x2000x2450 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

U-Clamp Screw Precision Measuring Tools Suhl Range: 75-100 mm Accuracy: 0.01 mm metric including test dimension with protective box

U-Clamp Screw Precision Measuring Tools Suhl Range: 75-100 mm Accuracy: 0.01 mm metric including test dimension with protective box

U-Clamp Screw Precision Measuring Tools Suhl Range: 75-100 mm Accuracy: 0.01 mm metric including test dimension with protective box

U-Clamp Screw Precision Measuring Tools Suhl Range: 75-100 mm Accuracy: 0.01 mm metric including test dimension with protective box

U-Clamp Screw with Plate Fine Measuring Tools Suhl Range: 100 - 125 mm Accuracy: 0.01 mm TGL15046/I with protective box

Shackle Measuring Screw Precision Measuring Tools Suhl Range: 100 - 125 mm Accuracy: 0.01 mm metric including test dimension with protective box

Screw gauge with plate Fine measuring tools Suhl range: 50 - 75 mm metric including test dimension with protective box

pneumatic linear actuator FESTO DGC-12-370-KF-YSRW-A 530907S708 Characteristic length: 370 mm New ! Dimensions: 520 x 40 x 30 mm

Hydraulic power unit HOERBIGER FLUIDTECHNIK Working pressure: 50 bar Magnetic voltage: 24 V Pump flow rate: 8 l/min Tank volume: 25 liters Motor: 0.75 kW Motor voltage: 220/ 380 V/ 50 Hz used, tested ! Dimensions: 400 x 360 x 100 mm

Pin Puller, Pneumatic Pin Pulling Cylinder FESTO stroke: 24 mm rod diameter: Ø 30 mm Pneumatic cylinder: ADVU-50-25-PA 156553 0.8 - 10 bar New ! Dimensions: 290 x 90 x 150 mm

Pin Puller, Pneumatic Pin Pulling Cylinder FESTO stroke: 48 mm rod diameter: Ø 30 mm Pneumatic cylinder: ADVU-50-50-PA 156556 0.8 - 10 bar New ! Dimensions: 375 x 90 x 150 mm