f k used for sale

Synrad FSV30SAE Firestar Series Compact CO2 Laser

with reinforced impeller 2800 min-1 4.0 kW B3 400/690 V IE 3 Max: 3200 min-1 T-max. 70°C incl. spare impeller Year of Make: 2019 Operating and assembly instructions available Weight approx. 76 kg

For containers up to 30 ltr. Continuous extrusion. Clamping force 30 tons. With waste punch and handover

Various milling heads for milling machines and gear cutting machines, hobbing machines

machine measurements: 2.100 x 2.200 x 2.100 mm machine weight: 2.000 kg power capacity: 36 kW Condition: used Specification: cleaning and degreasing system FIRBIMATIC LOGICA 200V closed cleaning system for the cleaning of of metallic components with highly stabilised perchloroethylene - second-hand - Closed cleaning system for the cleaning of metallic components components with highly stabilised perchloroethylene. - PER-based cleaning and degreasing system Possible cleaning cycles: 1. pre-cleaning (spraying) 2. main cleaning (spray and flood cleaning) 3. rinsing (hosing down) 4. vapour degreasing 5. vacuum drying - All cleaning cycles are freely programmable. - Filling volumes: Tank 1: 170 litres Tank 2: 80 litres - Type of solvent: Perchloroethylene - Total connected load of motors: 9.65 kW - Installed electrical power incl. heating syst ...

Fensterfalztasche - Altarfalztasche - Gateway Buckle MBO für K/T 79er Year 1985 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Complete with intelligent random in feed system. As new condition

Fensterfalztasche - Altarfalztasche - Gateway Buckle MBO für K/T 72er Year 1998 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Fensterfalztasche - Altarfalztasche - Gateway Buckle Stahl für K/T 56er Year 1994 with deflector with control box Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Fensterfalztasche - Altarfalztasche - Gateway Buckle Stahl für K/T 94er with deflector with control box Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Eckeneinziehmaschine / Corner Pulling Machine FOMM CPM Serial-Nr. 76A34 Manuelle Bedienung / Manuell Operation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Transmission Manufacturer: Rossi Model: R2E 355 FC2S The gearbox is NEW and fully functional. see pictures for more details.

Kuvertiermaschine / Inserting machine Fracotyp-Postalia FPi4530 Serial-No. 10EY5510 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Geared motor Article number: FDU1703/2358232 003 2KJ3502-7EK23-2HG1-Z BAZ39-LE90SM4P 50HZ - 60HZ 1.1 KW S1 1440r\min 50HZ n2:181r\min 60HZ n2:219r\min 24Kg NEW and fully functional, from stock, see pictures for more details.

Key data: 7 KW, 1500 1/min

used, comes from a fully functional plant Model: aiI 12/7000 Type: A06B-1408-B103 Year of manufacture: 03/2006 S1 11 kW / 1500 - 6000 rpm / max. 54 A 7.5 kW / 7000 rpm S2 30min S3 60 15 kW / 1500 - 6000 rpm / max. 64 A 11 kW / 7000 rpm Space requirement LxWxH: 620 x 350 x 300 m

Transmission Manufacturer: Flender BA5010 06.03+BA7300 01.05 The part is in good condition, Nevertheless, this is a used items, that shows or may show signs of wear. For more details, see pictures.

Doka Framax Element 120 x 240 Uni The frames and the formlining are in good condition and can be used immediately. The high-performance steel frame formwork for large-scale formwork with the crane. Large element for fast formwork Easy to clean thanks to powder-coated frames Doka Framax steel panel 120 x 240 Uni Frames and formlining are in good condition and can be used immediately. The high-performance steel framed formwork for large-area forming by crane. Large element for fast forming Easy cleaning due to powder-coated frames

Milling machine - Universal Make: AVIA Type: FND 25 Year of construction: 1984 Control type: conventional Country of origin: Poland Delivery period: right away Technical details x-way: 400 mm y-way: 360 mm z-Way: 400 mm Mounting table: 800x400 mm Tool holder: SK40 Quill Hub: 100 mm Speed: 40...2000 rpm Total power requirement: 4.5 kW Machine weight approx.: approx. 2.4 t Space requirements approx.: L:1.6xW:1.3xH:2.0 m

Grease Environmentally friendly, quickly biodegradable lubricating greases based on calcium soap and rapeseed oil. Manufacturer: Fuchs Item No.: 600654726 Plantogel 2 N 180 kg NEW - orig. packaging

Product number: 3066 Type: PRoGRILL 1175 TFEF Serial number: 3237006 Year of construction: 2014 Belt width: 1100 mm Cooking length: 10000 mm Heating: thermal oil, 189kW + electric, 128kW Exhaust: 1000 m³/h Steam: 3 - 7 Bar Compressed air: 6 Bar, 12 l/min Water: 15,4 l/min for belt washer Power: 3 x 400V, 50Hz, 168kW Dimensions: 10000 x 2200 x 2450 mm With flipover conveyor in the middle Including welding trolley

Manufacturer: SPITZNAS Type 2E22V-FHP-Z Torque: 50000 Nm Speed: 0-0.15 rpm Shaft: approx.: Ø160 mm Overall dimensions: approx. 1500 x 1100 x 800 mm Discover the high-quality hydraulic gear motor 50000 Nm used B17806, a sophisticated hydrostatic gear motor that convinces in its performance and precision. This high-quality motor is produced by the renowned manufacturer SPITZNAS and promises optimal work results in industrial applications thanks to its outstanding technological advances. With an impressive torque of 50000 Nm and a variable speed of 0-0.15 rpm, this geared motor offers powerful performance for reliable changeovers and efficient process management. The robust shaft with a diameter of 160 mm is ideal for demanding applications in heavy industry and convinces with its durability and resistance. The hydraulic motor impresses with its well thought-out design, in wh ...

Vibrating motor / vibration motor Manufacturer: Friedrich SKU: FTKX 1750-6-7 5.6kW The spare part is in good condition Nevertheless, this is a used items, which shows signs of wear, or may have. see pictures for more details.

Applied Biosystems Thermo Fisher Scientific SimpliAmp IS VERIFLOW Thermal Cycler Year of manufacture: 2021 The SimpliAmp Thermal Cycler™ is a small-sized, easy-to-use, and accurate thermal cycler that meets the needs of any laboratory for everyday PCR activities. Thermal accuracy: ± 0.25°C (35°C to 99.9°C) For use with (equipment): GeneAmp 2700, GeneAmp 9700, Veriti Thermal Cycler, 2720 Thermal Cycler Dimensions: 46 x 24 x 21 cm (18.1 x 9.5 x 8.3 in) Voltage: 100 to 240 V Product Type: Thermal Cycler Temperature range: 0°C to 100°C Power: 600 W Number of programs: >1,000 protocols Weight: 8.3 kg (18.3 lbs) High-speed compatibility: Not compatible with broadband (manual) Thermal uniformity: < 0.5°C (20 s after reaching 95°C) Capacity: 96-well Display Type: 8-inch color TFT LCD touch screen User interface: USB, Wi-Fi, Ethernet Max. temperature rise: 4°C/s  ...

Geared motor Article number: 2KJ3102-1DE22-2AP1-Z FDU1705/2370145 001 Z29-LE80MH4E-L16\10N 50HZ - 60HZ 0.75 KW S1 1440r\min 50HZ n2:99r\min 60HZ n2:120r\min 18Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1703/2358228 001 2KJ3501-5EK23-2HD1-Z BAZ29-LE90SM4P 50HZ - 60HZ 1.1 KW S1 1440r\min 50HZ n2:281r\min 60HZ n2:340r\min 19Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1711/2398533 020 2KJ3102-1EK23-2HF1-Z ZZZ29-LE90ZLSM4P IP 55 50HZ - 60HZ 1.1 KW S1 1440r\min 50HZ n2:235r\min 60HZ n2:285r\min 17Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1703-2358222 2KJ3102-1FN23-2HA1-Z ZZ29-LE9100ZLSA4P-L16NH IP 55 50HZ - 60HZ 7.65\4.4A 4.35A 2.2KW S1 2.55KWS1 1465r\min 50HZ n2:419r\min 60HZ n2:507r\min 35Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: 2KJ3102-1DF23-2HL1-Z FDU1703/2358250 002 ZZZ29-LE80ZMQ4P IP 55 50HZ - 60HZ 3.04A 1.68A 0.75 KW S1 0.86A 1450r\min 50HZ n2:143r\min 60HZ n2:173r\min 15Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1711-2401486 001 2KJ3501-6EM23-2HB1-Z BAZ29-LE90ZLR4P IP 55 50HZ - 60HZ 5.5\3.15 A 3.15A 1.5KW S1 1.75KWS1 1445r\min 50HZ n2:343r\min 60HZ n2:411r\min 22Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1703-2358223 2KJ3102-1FN23-2HA1-Z ZZ29-LE9100ZLSA4P-L16NH IP 55 50HZ - 60HZ 7.65\4.4A 4.35A 2.2KW S1 2.55KWS1 1465r\min 50HZ n2:419r\min 60HZ n2:507r\min 37Kg NEW and fully functional, from stock, see pictures for more details.

Perfect binder with milling head

Key data: 6000 mm, 2000 mm

Ref.Nr. 00846 Name of the system: Used waterjet machine Spare parts system Manufacturer Flow Model Foracon WS3-20/602KS Built in 1995 Sheet size 2000mm x 6000mm Achievement 9Kw ( Engine ) 2 pumps (flow) 2 cutting heads Operating hours pump 1 = 19700 h Operating hours pump 2 = 24751 h Incl. sand tower Incl. sludge removal system Renewal of the control system 2016 ( Engelmann company ) Condition of the system was disconnected a week ago Is still under power but cannot be demonstrated because the cables have been cut during disconnection Customer has used the system until the end Submission date Immediately

Geared motor Article number: FDU1711-2401485 2KJ3102-1EM23-2HA1-Z ZZ29-LE90ZLR4P IP55 50HZ - 60HZ 5.5\3.15 A 3.15A 1.5KW S1 1.75KWS1 1445r\min 50HZ n2:416r\min 60HZ n2:499r\min 20Kg NEW and fully functional, from stock, see pictures for more details.

SPECIFICATIONS: Burning capacity Kcal/h: 150,000 Usual yield Kcal/h: 120,000 Air flow m³/h: 8,900 Electrical power of the fans KW: 2.9 Burning wood and legally permissible solid fuels. Weight kg: 615

Geared motor Article number: FDU1711-2398534 2KJ3102-1EK23-2HF1-Z Z29-LE80MH4E-L16\10N IP55 50HZ - 60HZ 3.11\1.79A 1.72A 1.1KW S1 1.27KWS1 1440r\min 50HZ n2:235r\min 60HZ n2:285r\min 18Kg NEW and fully functional, from stock, see pictures for more details.

- Spindle speed:50 - 7 100 [rpm] - 6 spindle feeds:0.03 - 0.4 [mm/t] - Spindle stroke:210 [mm] - X-axis machining row:850 / 1 000 [mm] - Y axis machining series:465 [mm] - Z axis machining series:750 [mm] - Tension dimension on table:1 570 x 500 [mm] - T Groove:7 - Groove centre distance:50 [mm] - Width of groove:12H8 - Positioning precision:0.01 [mm] - Repetition Precision:0.005 [mm] - maxi part weight:250 [kg] - Drive power:5 [KW] - Steel Bore Capacity: 30 [mm] - Steel Internal Tapping Capacity: M 20 - Cast Iron Internal Tapping Capacity: M 24

Universal tool milling machine from Stimin suitable for tooling, fixture making, mold making and training Travel distances : 320x250x300mm Speed :40-2240 rpm Mounting : SK 40 Table 600x210mm Longitudinal travel (X,Y,Z axis) 320x250x300mm Tool holder: SK 40 Vertical spindle speeds: 40-2240rpm Feeds 12-630mm/min Cjsbxicvyt Connection 50 Hz 3x 380V Spindle motor 2.2KW Machine weight approx. 1000kg Dimensions 1200x1900x1000mm

SPECIFICATIONS: Burning capacity Kcal/h: 99,500 Usual yield Kcal/h: 80,000 Air flow m³/h: 6,300 Electrical power of the fans KW: 1.5 Burning wood and legally permissible solid fuels. Weight kg: 415 SURFACE TO BE HEATED APPROX.: m2 300 / 350 - m3 1.500

SPECIFICATIONS: Burning capacity Kcal/h: 69,000 Usual yield Kcal/h: 55,000 Air flow m³/h: 3,500 Electrical power of the fans KW: 0.5 Burning wood and legally permissible solid fuels. Weight kg: 305 SURFACE TO BE HEATED APPROX.: m² 200 / 250 - m³ 1,000

FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...

We offer: Pallet racking, new 81 pitches Manufacturer: Maxrac Specifications: 10 stand frames, approx. 1,700 x 1,050 mm 36 supports, approx. 2,700 x K130 mm 72 locking pins Shelf load is 3,000 kg (with evenly distributed load). Per piece €2,382.35 net plus 19 % VAT from stock 21698 Harsefeld. Subject to changes and errors. We are a professional provider – invoice with VAT indicated.

pressure: 130 t chamfer lenght: 3150 mm distance between columns: 2600 mm engine output: 15 kW control: CYBELEC VisiTouch weight of the machine ca.: 10900 kg dimensions of the machine ca.: 3990x1750x2900 mm Equipment: - Controlled axles: Y1, Y2, X, R, Z1, Z2, X1 - Fully dynamic, hydraulic crowning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double Swivel Head Fast Runner SK40 for the Deckel FP Milling Machine without Motor However, the motor of the normal high-speed engine should fit just as well. Although the complete head probably has 70kg at the end, it probably even fits from FP1 upwards to FP4 Very good used condition, either never used, or only a few times. Except for slight traces of storage, no signs of wear to be seen. The spindle rotates cleanly and easily. However, the (drilling) stroke is a bit heavy, probably has to be adjusted. Pickup. However, a delivery can be arranged in advance, can... You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.

• Fully automatic machine for cleaning (blowing out) bottles using compressed air • Running direction from left to right • Connection pressure 6-9 bar, working pressure 0.5-3.0 bar • Output max. 12,000 bottles/h • Bottles are rotated 180° so that the openings point downwards. Blow-out needles plunge into the interior of the bottles • Pressure sensor for checking the correct blow-out pressure • Extraction of blow-out air and residues below the bottles • HMI Siemens Simatic Touch Panel • PLC Siemens S7-300 • With format set for 10 ml vials (diam. 25.3 x 46.2 and diam. 24.0 x 45.0, other format sets on request) • Connection 230/400V/50Hz • Has worked together with bottle unscrambler 02-0746 (see pdf)

Transnorm belt curve conveyor right GKF 90°-1300-1100-IR900 -- NEW RA2332 Technical data: Frame width (NB): 1300 mm Frame width with Bearing cover: 1400 mm Frame width with Bearing cover and gearbox (MB): 1500 mm belt width (GuB): 1100 mm height (BH): 160 mm height motor below: 360 mm height including motor (MH): 520 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees middler conveying speed (v m/s): 1,5m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 2.2 / S1 Belt: KT 96 new Year of construction: 2021 Optionally available: Supports Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1300 Belt width in mm: 1100 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive  ...

Manufacturer: Fatosa Type: TBG 480 Year of Make: 2004 Power: 5.5 kW Connection: 400 V Productivity: up to 3000 kg/h Maximum block size: 600 x 480 x 250 mm Max block temperature : -20°C Net weight: 550 kg Dimensions: Length 1350 x Width 700 x Height 1750 cm With raised front cover - height 2117 mm The guillotine is only equipped with a cross-cutting blade. Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Transnorm curved belt conveyor left bend 90°-1400-1200 IR2500 RA2334 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 1400 mm belt width (GB): 1200 mm innerradius (IR): 2500 mm overall height (BH): 260 mm motor height (MH): 450 mm Motor type: SEW gear motor Electrical Data: 380-500 V, 0,55 kW Conveying speed: contact us for an individual convoying speed Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2020 condition: new Nominal / inner radius in mm: 2500 Nominal / outside width in mm: 1400 Belt width in mm: 1200 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: ...

Diameter Capacity 3-10 mm Bending arm lenght 755 mm

Cross-cut saw motor 1.8 kW Milling motor above 1.8 kW Milling motor bottom 1.8 kW Sliding table with Superfix hand clamp Saw blade 2 slotted discs