f 45 used for sale

UNUSED: Facinghead of a Wotan BF 160 Horizontal borer.

Cover FP2 FP 2A SK40 / with dialog 11 path control Control: CNC Dialog 11 - 3D Web Control Speed: 40 - 4000 rpm Feed rate: 2 - 3600 mm/min infinitely variable Rapid speed: 4 m/min Drive power: 1.6 / 2.0 kW 1400/2800 rpm Quill: Extendable quill vertical 80 mm SK40 with Clamping system DIN 2080 Travel: X/Y/Z: 300/300/400 mm Rotary table: 3 axis Universal table 600 x 330 mm max load 250 kg Equipment: Hydromechanical clamping system SK40 with suit bolt DIN 2080. Vertical & Horizontal spindle , Milling head manually swivel+/- 90 ° Machine light Programming: Dialog-guided programming with cycles. E-handwheel.

Code 61063 Description Surface grinding machine Make ABA Model FFU 2000/60 Serial No. 208 125 Control Abamatic 3 Year 1986 Tablesize 2510 x 500 mm Grinding surface L x B x H 2000 x 600 x 700 mm Magnetical plate size L x B 2000 x 500 mm Speed table movement 3 – 30 m/min. Max. distance table – centre grinding wheel 900 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 50 x Ø 127 mm Spindel power 26 kW Spindel speed 1600 - 3000 rpm Motor power 26 kW – 380 Volt Total electr.com. 34 kW Total space L x W x H 7000 x 3500 x 2650 mm Weight 10500 kgs Accessoiries Elec. Magneticplate 2000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in good condition

We offer all kinds of electronic componentes for URBAN and Elumatec machines. Contact us on spares@finke machines

Robots from Fanuc, installed since 2022

X-axis: 4500 mm Y-axis: 2500 mm Z-axis: 1000 mm Year: 1986 Voltage: 380 V Power: 80 kW Weight: 63000 kg Size: 9500x9800x6100(h) mm

Trailer open box with charger Ab. Total weight 2,700 kg Loading area internal dimensions approx. LxW 4,100 x 1,840 mm Galvanised steel frame construction with aluminium side wall flaps, loading floor made of screen printing plates, 4 "VarioSave" load securing trusses integrated in the floor, also for use with VarioSave insertion stanchions (2 pcs included). Further lashing eyes on the left and right of the vehicle floor as well as net hooks mounted on the outside of the side walls. 2 BPW rubber spring axles 1500 kg, tyres 195/50 R13 C on steel rims, renewed in 2024. Technical inspection until 12-2026 Equipment: electro-hydraulic on-board crane Maxilift 180.D3E, 3 extensions hydraulic, 1 extension manual, with crane hook, max. load capacity 990 kg, on 2.14 m 800 kg, on 3.06 m 550 kg, on 4.00 m 420 kg, on approx. 5 m 280 kg. Crane operation electrohydraulically for loading arm lifti ...

X-axis stroke 8,000 mm Y-axis stroke 1,000 mm Z-axis stroke 2,000 mm ISO 50 spindle cone Front bearing spindle diameter 100 mm Total table top 1,000x10,000 mm Maximum workpiece weight per 1m board length 2,500 kg Nominal main propulsion power 22 kW Spindle rpm range - continuous 11-2,500 per minute

Large Format 3000 x 1500mm With Automation Siemens 840

Code 1810 DESCRIPTION CNC Universal milling machine Make TOS Model FNG 63 CNC S/N 16663 Year 1991 Control Heidenhain TNC 355 Table 1120 x 630 mm Longitude ( X – axis ) table 800 mm Vertical ( Y – axis ) table 500 mm Cross ( Z – axis ) spindle 630 mm Spindle movement ( H/V ) 100 mm Spindle taper 40 ISO Speeds 20 - 4000 rpm Feeds X-Y-Z 1 – 7500 mm/min Rapides 7,5 m/min Spindle motor 11 kW – 380 Volts Accessories Table 1120 x 630 mm Coolant Condition Machine is in normal condition

Finnrose Plate Stacker Type ST-10-170 Electronic For automatic stacking (e.g. on roller conveyor for further transport) Of plate-shaped workpieces, doors, or woods Was used to stack timber behind a four-sided planer Workpiece size Maximum 2500 mm x 800 mm Minimum 400 mm x 250 mm Weight maximum per workpiece 80 kg Capacity 20 workpieces per minute, depending on the workpiece size Maximum stacking height above floor 1800 mm Belt drive 0.18 kW Roller drive 0.09 kW Compressed air consumption per stroke 3.9 NL Instruction manual and circuit diagram available Weight approx. 600 kg Dimensions 2800 mm x 2200 mm x H 1100 mm (H max. 1800 mm)

Code 111256 Description Hydraulic vertical Keyseatingmachine Make FRÖMAG Model RAPIDA D 63/425 Serial no: AKK 87370 ASK 1660 Year 1979 Capacity : 3 – 63 mm Stroke length: max. 445 mm Speed: 2 – 22 m/min max. weight on table: 30.000 kg Tabel size 685 x 455 mm Accessories Autom. Cycle Very much tooling Condition Good

Doka Frami panel formwork (1469 m²) Handy and lightweight steel frame formwork for foundations, walls and columns. The lightweight Frami steel formwork with a robust, hot-dip galvanized steel frame is ideal for fast formwork with and without a crane. Fast and universally applicable thanks to many practical product details Cost-efficient due to excellent system properties Easy handling and planning thanks to practical element grid Excellent concrete results due to particularly stable design Doka Frami framed formwork 1.469m² Light and manhandled steel-framed formwork for foundations, walls and columns The lightweight Frami formwork, with its sturdy hot-dip galvanised steel frame, ideal for fast and, with or without a crane. Can be put to use quickly, anywhere thanks to its many practical details Cost-effective because of its outstanding system attributes Easy handling and  ...

Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Doka Frami panel formwork 1.50m Handy and lightweight steel frame formwork for foundations, walls and columns. The lightweight Frami steel formwork with a robust, hot-dip galvanized steel frame is ideal for fast formwork with and without a crane. Fast and universally applicable thanks to many practical product details Cost-efficient due to excellent system properties Easy handling and planning thanks to practical element grid Excellent concrete results due to particularly stable design Doka Frami framed formwork 1,50m Light and manhandled steel-framed formwork for foundations, walls and columns The lightweight Frami formwork, with its sturdy hot-dip galvanised steel frame, ideal for fast and, with or without a crane. Can be put to use quickly, anywhere thanks to its many practical details Cost-effective because of its outstanding system attributes Easy handling and planning ...

Doka Frami panel formwork 1.20m Handy and lightweight steel frame formwork for foundations, walls and columns. The lightweight Frami steel formwork with a robust, hot-dip galvanized steel frame is ideal for fast formwork with and without a crane. Fast and universally applicable thanks to many practical product details Cost-efficient due to excellent system properties Easy handling and planning thanks to practical element grid Excellent concrete results due to particularly stable design Doka Frami framed formwork 1.20m Light and manhandled steel-framed formwork for foundations, walls and columns The lightweight Frami formwork, with its sturdy hot-dip galvanised steel frame, ideal for fast and, with or without a crane. Can be put to use quickly, anywhere thanks to its many practical details Cost-effective because of its outstanding system attributes Easy handling and planning ...

Tensile testing machine Manufacturer: Karl Frank GmbH Type: 81559 Year of construction: 1980 Duck test: height: 1000mm, width: 400mm, depth ungraenzt Force ranges: 2000N, 1000N, 500N, 200N, 100N, 50N Original price at that time: 49.855,00 DM ATTENTION: The device has not been tested for functionality. All information without guarantee

Extraction plant

3-channel foil nozzle EDS FSK-600 with flex lip (tire tubes) Output capacity: 40 -50 kg/h Lip adjustment with screws and storage beams in the main layer Film width: max. 600 mm Film thickness: 0.1 – 3.0 mm 3 computer-calculated hanger channels for optimal melt distribution Distribution: A 10-15%, B 70-80%, C 10-15% Drilled nozzle lip for liquid temperature control 9 heating zones with high-performance cartridge heaters Connected load for nozzle: 18 kW (0.5 kW x 36) Fully wired for 240 V / single-phase Nozzle dimensions (L x W x H): 450 x 650 x 400 mm, weight: 760 kg Coex adapter block for one middle and two outer layers Dimensions adapter (L x W x H): 320 x 210 x 400 mm Remark: Tool steel 1.2311 All flow surfaces are chrome-plated (25-30 μm)

x-travel: 2500 mm y-travel: 1000 mm z-travel: 1000 mm Control: Heidenhain table surface area: 2600x800 mm turning speeds: 2100 U/min spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crane arm for forkliftWeight 220 KGApplicable lifting force: 2500 KGAload: 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used decenter centrifuge Flottweg Z 32. Year of manufacturing: 2001. Rotor bowl: max. speed 5000 min’1 max. solids density 2,0 g/cm3 bowl inside diameter 320 mm discharge diameter mm material bowl 1.4463 material sealings NBR / PTFE max. operating temperature 0/100 °C scroll: wear protection helix cobalt base material feed compartment metal armored Adjustment: bowl speed 4500 min’1 scroll differential speed 1...25 min'1 Drive: kind: hybrid - drive bowl drive: electromotor: type 160 M performance 15 kW voltage / frequency 400 V / 50 Hz scroll drive: pump: type A 18 hydromotor: type 1071 S electromotor: type 132 M performance 7,5 kW voltage / frequency 400 V / 50 Hz Technical documentation - available

faceplate diameter: 2500 mm swing diameter: 3200 mm turning height: 3100 mm Control: R&D type: MTC 2x-2 workpiece weight: 20000 kg slide adjustment: 1600 mm side head - cross travel: 1000 mm Tool changer: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: 3200/5100 mm profile spindle: 1 Stück main drive: 12 kW Control: Beckhoff CNC Number of axles: 5 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 720 mm width: 500 mm height: 600 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1200x640x600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling machine Brand: Flott Type: 6STW Technical data: Drill chuck holder: B12 Drill chuck stroke: 40mm Distance from column to drilling area: 180mm Thickness of the column: 50mm Worktop: 180x260mm Motor: 0.9 kW Speed: 1250-8000 rpm Weight: approx. 20kg Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

saw blade diameter: 350 x 32 x 2,5 mm 2 speeds: 30/60 UpM vice: 130 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 130x80 mm : 100 mm : 85 mm : 90x80 mm : 75 mm : 75 mm : 90x65 mm total power requirement: 1,1/2,2 kW weight: 220 kg Equipment: - including machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 4 kg workpiece length: 200 mm dia. on complete length: 200 mm Control: Schenck-Lauer electrics - voltage/frequency: 400 / 50 V/Hz dimensions: 4,1 x 4,2 x 2,5 m connected load: 12 kVA flange diameter: 250 mm weight: 4,5 t Balancing machine for rotors - Turbocharger fuselage groups - hydraulic measuring station - Compensation station - Pulsation measuring table - Chip extraction - Measuring instrument CAB 950T - feeding device - Schenck/Lauer Control on Dase of Windows The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 1800 mm workpiece height: 750 mm Travel: 4000 mm table width: 5500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5300 mm y-travel: 2500 mm z-travel: 1200 mm angular milling head: Table load: 60000 kg column daylight: 2700 mm workpiece height max.: 1700 mm Table dimensions: 5000x2250 mm control: Heidenhain type: 430 : total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 29 kW volt: 129 V ampere: 29 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm table surface area: 900x520 mm turning speeds: 4000 U/min tool taper: SK 40 Control: Heidenhain type: TNC 355 : elec. coolant: total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 23 kW volt: 127 V ampere: 33 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Moretti Forni convection oven Model: F80E Serial: 1321225 2006, stainless, variable temp and timer controls, with ability to steam, on mobile frame, 18.5kw, 3Ph

We sell 200 x Fujitsu Esprimo Q558 Mini PC's, desktops In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from al ...

inner taper of milling spindel: Sk40 collet diameter: nein turning speed range: 300 bis 3000 U/min drive motor: 15 kW weight of the machine ca.: 0,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 4000 mm y-travel: 2200 mm z-travel: 1500 mm : 270 mm spindle turning speed range: 20-2000 U/min Control: Heidenhain type: TNC530i table surface area: 3000x1600 mm table load: 40 t spindle taper ISO: 50 spindle motor: 50 kW T-slot - width: 28 mm number of T-slots: 9 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Maschine wurde überholt machine is retofit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Torque: 12 Nm volt: 144 V ampere: 11 A power capacity: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.