extrusion press used for sale

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Qty. 1 Second-hand extrusion press with piercer Mfc.: UBE Force: 800 MT Built: 1979 Revamped: new hydraulic in 2010 Container dimensions: Dia. 90 x 555 mm Dia. 127 x 560 mm Dia. 132 x560 mm Material: Copper, Brass, Aluminium, Silver etc. Press is in good condition & on foundation

Qty. 1 Second-hand extrusion press Mfc.: FARREL Built: 1977 Type: hydraulic direct Force: 1600 Ton Billet dia.: 178 mm Billet length: 680 mm Container dia.: 185 mm Container length: 698 mm Operation pressure: 220 bar Fixed dummy block

Qty. 1 Second-hand extrusion press line Mfc.: Breda Sutton, Cometal, OMS Type: oil hydraulic, Dia.: 7 inch, 178 mm Force: 1600 MT Built: 1977 Fully reconditioned in 1995 Scope of supply: Log feeder Billet Furnace Hot Shear Extrusion Press Run-out Table Puller Cooling Bed Stretcher Finishing saw Aging Furnace Die Furnace

Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: CLECIM, AUBURTIN, OILGEAR Force: 3000 MT Bilet dia.: 8’’ Built: 1972 Modernised: Mechanical & Electrical in 2000 Scope of supply: Log Loading Table Log Furnace Billet Shear Extrusion Press Run-out Table Puller Stretcher Finishing Saw Aging Furnaces

Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: SMS, Junker, Allen Bradley Force: 2500 MT Built: 1983 Modernised: 2017 Allen Bradley Ethernet Control System & NITROGEN DIE Cooling system Billet dia.: 8” Length: 450 – 950 mm Scope of supply: Log Loading Table Log Furnace Extrusion Press Run-out table Single Cable Puller Cooling Ventilator System Section Stretcher Storage Table Finishing Profile Saw Aging Furnace Die Heating Furnace Automatic Stacker Spare Parts

Qty. 1 Secon-hand aluminium extrusion press line Mfc.: AJAX, LOEWY Built: 1965 Force: 13.6 MN Billet dia.: 152 mm, 6 inch Length: 600 mm Scope of supply: Billet Induction Furnace Extrusion Press Exit profile flame cut Cable Puller Graphite Run-out Table with Pilgrims Pitch Traction bench Oliver Pendular cold saw Manual Piling

Qty. 1 Second hand aluminium extrusion press line Mfc.: Taiyuan Force: 5000 MT Type: Front loading – single action Built: 2007 Stopped in 2016 Product weight: max. 55 kg/m Billet dia.: 279 & 406 mm (11” & 16”) Length: 600 - 1200 mm Consist of: Cold billet saw Gas heated billet furnace Extrusion press Run-out table Platen saw Quenching device Single puller Stretcher Finishing saw Dies heater

BARMAG POLYESTER EXTRUSION -SPINNING LINE WITH 12 POSITION / 72 THREADLINES FOR POLYESTER POY MICROFILAMENT YARNS • MANUFACTURER : BARMAG , GERMANY • CONSISTING OF FOLLOWING EQUIPMENT : •1 EXTRUDER BARMAG 12 E 8•SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS3,5 CC/U•SPINNERETTES 100MM DIA, BOTTOM LOADED,DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO•POLYMER MANIFOLD EXTRUDER TO SPIN BEAM•DOWTHERM MANIFOLD FOR SPINBEAM ANDPOLYMER MANIFOLD•QUENCH SYSTEM INCLUDING FINISH SYSTEM,SPINFINISH JETS BY 'KYOCERA'•WITH CONVENTIONAL QUENCHING CABINETS +EVOSEPEED & RADIAL TYPE •TAKE UP UNITS, INCLUDING:•TAKE UP SECTIONS / PLATFORMS / LADDERS•COLD GODETS, ONE PAIR PER POSITION•INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS•YARN SUCTION SYSTEM•12 WINDERS, BARMAG CW6-1200/66 ENDS PER CHUCK , max. dia 440mm, stroke 170 mm

calender for PCV foil

Mono-plate system Material:PE, PP, PS, ABS. Built: 1985, last modification: 2003 Screw diameter: 100 mm, L/D 36 Extruder with degassing, vacuum pump, melt pump, hydr. Screen changer, nozzle 1350 x 1.0 - 6.0 mm, 3 rolls smoothing unit 1350 x x 350 mm with single drives, 3 temperature control units for roller temperature control, cooling section, side cut, printwith 2 rubber rollers, top and bottom protective foil lamination, cross saw 1,350 mm, switch cabinets with air conditioning, separate control panel

Cast Film CoEx System (ABA), PE / PP, Capacity: approx. 400 - 700 kg/h, Main extruder, 120 mm, co-extruder of 60 mm, screen changer, melt pump, Co-Ex block, nozzle 1,650 mm, 2-roll chill-roll smoothing unit, cooling section, extractor, double winder with cutting device and edge control, edge trim, film measuring device thickness NDC (without measuring head), incl. operating instructions and e-plans.

3-channel foil nozzle EDS FSK-600 with flex lip (tire tubes) Output capacity: 40 -50 kg/h Lip adjustment with screws and storage beams in the main layer Film width: max. 600 mm Film thickness: 0.1 – 3.0 mm 3 computer-calculated hanger channels for optimal melt distribution Distribution: A 10-15%, B 70-80%, C 10-15% Drilled nozzle lip for liquid temperature control 9 heating zones with high-performance cartridge heaters Connected load for nozzle: 18 kW (0.5 kW x 36) Fully wired for 240 V / single-phase Nozzle dimensions (L x W x H): 450 x 650 x 400 mm, weight: 760 kg Coex adapter block for one middle and two outer layers Dimensions adapter (L x W x H): 320 x 210 x 400 mm Remark: Tool steel 1.2311 All flow surfaces are chrome-plated (25-30 μm)

The "Epoch TM" extrusion casting apparatus (wide slot nozzle) has been designed and constructed for the thermoforming of polypropylene (heavy films). Operating fluids PA12, PP For other materials, contact must be made in advance with the manufacturer in order to check the processability. Specifications: Weight 839 kg. ; Power supply 230 V; number of zones cast body 14; Encapsulation block 2; KW total: cast body 21.9 KW; Auto Gauge 730 KW; Cast lip heating 3.4 KW; Additional equipment: internal edge boundaries with fixed length

according to pdf attached

A fully equipped line for the production of polypropylene yarn type Technorope 1000/100/PP-300: Manufacturer: Sima Srl Useful width of the cutting head: 1000 mm Capacity: up to 300 kg/h, depending on the type of yarn Twister: 16 (with 16 batteries) Yarn types: from 5000 to 120 000 denies

pdf attached

olienherstellung =: PVC shrink and PET Line speed: 80 meters/min Final net film width: 4.2 meters Line speed: 80 meters/min Production capacity: 21 tons/day The machine includes: -Automatic turnstile unwinder 2 meters -Automatic turnstile -Winder 4.50 meters -Cooling system -automatic thickness control -automatic control of infrared heating -Automatic inline edge strip handling system -TCU -Controller fan -Cooling tower -Exhaust pipes -Exhaust hood -16 steel core width 4.8 meters -Complete spare parts (package purchased for 280.000 €) Dimensions approx. length 50 m x width 19.0 m x height 5.9 m

Line for PVC profiles : 1.Extuder Single Theysohn AS 63mm PVC 2. Calibration table Greiner Genius Cal 2P/3.6 3. Theysohn REA32/1HJ-TECH belt lashing 4. saw Theysohn REA32/1HJ-TECH) price for all Line 23.000 Euro

Food extrusion product coating, drying and cooling line SCHAAF TECHNOLOGIE GMBH TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm TYPE 284 DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures processing of extremely sticky coated extrudates. Unlike the conve ...

Year 1990 retrofitted to 2006 Type: S80 Power: 100 kw Clamping force: 80 Tons Passage between columns: 1400 x 800 mm Tray dimensions: 1800 x 1200 mm Minimum mould thickness max: 800 – 1200 mm Maximum mould width: 1200 mm Minimum mould height max: 500 – 1100 mm Total opening of trays: 2000 mm Minimum die diameter: 150-350 mm Hydraulic servo control: 6 spool valves Pneumatic servo control: 17 distributors Screw diameter: 100 mm 23LD Material throughput: 360 kg/hour Parison Regulation: MOOG 400 points Blowing rods: low position Accumulation weight: 8KG/HDPE

Year 1999 Tonnage: 180 T Tray dimensions: 1020 x 1600 mm Max mould height: 2000 mm Max mould width: 1200 mm Min mould thickness: 840 mm Max mold opening stroke: 895 mm Screw diameter: 120 mm L/D ratio: 28 Maximum extrudable weight in PE: 19000 Gr Maximum injectable volume: 25 liters Number of parison regulation points: 100 Die Min/max diameter: 190/450

Wide slot nozzle with 750 mm slot width Current gap approx. 0.25 mm Rectangular inlet 70 x 20 mm Ser.-No. 86.9149M

A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 125mm, L/D ratio: 42, extrusion capacity: 650kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/512kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. The system has extensively documented defects.

A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145mm, L/D ratio: 42, extrusion capacity: 700kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/609kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible.

Souffleuse - machine d'extrusion soufflage BEKUM BA 200 Tête D'accumulation de 8 l 1 tete et 1 station Matériau transformé: PE Capacité de production: 500 kg / h Type d'extrudeuse: Accumulator Rsbpmev Hpnre If Hisu Nombre d'extrudeuse : 1 Diamètre de la vis : 120 mm Rapport L/D: 24 Contrôle de l' épaisseur: oui alimentation matière Course d'ouverture : 710 mm Force de serrage : 800 KN

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial-No.: 637 Contact length., effective: 1600 mm Gum pad width: 180 mm Design: smooth gum pads at the bottom and top Haul-off force: approx. 20,000 N Haul-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm (LxWxH) Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.

We are offering for sale a complete XPS foam sheet extrusion and coating line, consisting of the following equipment: 1. Davis-Standard Extruder System Model 1: 100MM35 - HP Capacity: 257 HP - KW Capacity: 192 kW - Gear Ratio: 17.39 - Extruder RPM: 100 - Mfr Date: 09-2007 - Dyn Thrust Capacity: 408,300 lb / 185,204 kg - Oil Fill: 23 liters (6 US gal), ISO VG 150 Model 2: 130MM45T - HP Capacity: 400 HP - KW Capacity: 298 kW - Gear Ratio: 17.49 - Extruder RPM: 100 - Mfr Date: 09-2007 - Dyn Thrust Capacity: 690,000 lb / 313,000 kg - Oil Fill: 45 liters (12 US gal), ISO VG 150 S-Wrap Unit - Model: S-WRAP - Mfr Date: 08-2007 2. LEWA High-Pressure Metering Pump (x1) - Designed for Isobutane - Adjustable stroke head for low % addition - Triple heads LDD3 LEWA diaphragm metering pump - Digital flow meter for injection rate (kg/hr) - Pressure indicators at pump inlet & outlet 3. Dosing  ...

KAUTEX KCC30 Extrusion Blow Molding Machine / Extruder Year: 2012 Number of operating hours: 33000 hours 1 position Robot Kautex Clamping force: 300 KN Screw diameter: 90 mm 4 KG Accumulation Head (HDPE) Tray dimensions: 530 x 700 mm Distance between trays: 1000 mm Maximum mold dimensions: 870 x 650 x 765 mm Command: Blow command Head Type: Vertical Head with Hydraulic Accumulator Maximum container volume: 30 litres Die diameter: 90, 150, 170, 190 or 220 mm Maximum pressure: 220 bar Air consumption: 95 M3/h Air pressure: 6 - 10 bar Installed power: 20 KW Number of temperature zones: 5

GREINER double-strand calibration table getCAL 11.2-5P/4Z - DUAL A (2008) Clamping table (L / W / H): 2 x 11,170 / 2 x 380 / 940 – 1,040 mm Rail spacing: 2 x 320 mm Center Distance Dual: 500 mm Clamping width (max.): 400 mm Height adjustment: 100 mm Side adjustment: (+/-) 15 mm Longitudinal adjustment: 750 mm Tilt adjustment: (+/-) 10 mm 5 vacuum pumps á 4.6 kW incl. 50 ABA 1/2'' vacuum connections 4 cyclone pumps á 1.1 kW Dimensions (L x W x H): 11,200 x 1,580 x 1,200 mm incl. calibration & water tanks GREINER Double Strand Fume/Saw Combination getCOM 30/9-235-S/500 (YOC 2008) Max. profile dimensions (W x H): 235 x 140 (per side) Contact length tracks: 2 x 2,300 mm Number of cleats: 2 x 55 pcs. Lug width: 235 mm (per side) Pull-off force max.: 30 kN (per side) Pull-off speed: 0.5 - 10 m/min Extrusion height adjustable via machine feet: 1,040 – 1,140 mm Saw ...

A complete extrusion line with a Reifenhäuser extruder and a gravimetric system Plast-Control (2006) is available. 1) Unwinder 1. 2) Primer unit and hotmelt unit for water-based adhesive lamination. 3) Dryer. 4) Unwinder 2. 5) Dolci extruder for extrusion lamination. 6) Unwinder 3. 7) Two printing units with additional dryer. 8) Extruder Reifenhäuser. 9) Rewinder. 10) Guide roller in the basement. 11) Web guiding under unwinder 1 in the basement. 12) 2x resin silos in the basement. This is a complete extrusion line with peripheral equipment. Documentation available. An on-site inspection is possible.

Souffleuse MECCANOPLASTICA MP1 - D En bon état de fonctionnement Année 2000 2 postes Force de fermeture : 35 KN Volume max du contenant. : 1,5 litres Diamètre vis. : 60 mm

Materials: PVC // Film Width (Max): 1000 mm

Materials: PP // Film Width (Max): 1650 mm

Extrusion lines for strapping tapes

Maximum Diameter: 800 mm // Minimum Diameter: 280 mm

Extrusion line for drip irrigation

Container Size With Actual Configuration: 1 l // Number Of Heads: 1

Maximum Diameter: 75 mm

Accumulation Head Capacity : 4 l // Number Of Heads: 1

Container Size With Actual Configuration: 2 l // Number Of Heads: 8

Container Size With Actual Configuration: 2 l // Number Of Heads: 5

Accumulation Head Capacity : 1,8 l // Number Of Heads: 1

MACHINE À INJECTION - SOUFFLAGE PROCREA TYPE Rev 100 Cette machine d’injection soufflage PROCREA REV 100 peut produire des récipients à corps creux complètement finis, sans déchets comme moulés en injection avec différentes matières plastiques, avec des cycles complètement automatique, capacité de 5 cc. à 750 cc. et poids de 5 gr. à 100 gr. Cette machine est prédisposée pour fonctionner avec des moules de 1 à 4 empreintes et la production est très élevée grâce au système à revolver qui accomplit toutes les opérations d'injection, soufflage et éjection de la pièce finie dans un seul stade. La construction des moules pour la Rev 100 est très simple grâce au système automatique d'extraction appliqué au revolver.

Souffleuse PLASTIBLOW type PB1 E/S électrique 1 tete , 1 poste Diamètre vis : 50 mm Année : 2008 Volume du flacon max : 1 litre Force de fermeture : 35 KN Cadence à vide : 1,5 sec Rapport L/D : 25 Consommation moyenne : 5 KW/h Puissance moteur : 18 KW Puissance de chauffe. : 6,9 KW 4 zones de chauffe 3 ventilateurs Dimensions moule : 280 mm x 325 mm x (81 + 130 + 85 ) mm Dimensions machine ( L x l x H ) : 2,35 m x 3,80 m x 2,35 m Poids : 3650 KG

Souffleuse MECCANOPLASTICA type MP1 - D En très bon état de fonctionnement Année : 2001 1 tete double et 2 postes Controleur de paraison 64 point MOOG Force de fermeture : 35 KN - 3500 kg Volume max du contenant. : 1,5 litres Diamètre vis : 60 mm 4 ventilateurs de refroidissement Puissance maximale de chauffe : 20 KW

BATTENFELD FISCHER BEKB 175 T blow molding machine - 29 kg of PE - 300 liters BATTENFELD blow-moulding machine capable of extruding parts up to 4500 mm. Machine equipped with a 40-liter accumulation head. HDPE capacity: 28.8 KG Closing force: 2 x 175 T with knee-bar locking system Machine equipped with 2 x 125 mm screws (20/D ratio) Capacity: 149 KG / H at 25 RPM Max screw speed: 40 RPM Blowing pressure: 7.5 bar (12-bar compressor available if required) 3-material volumetric screw dosing system (virgin material, regrind and colorant) Machine equipped with unloading clamp Can be sold with a RAPID GK 8045 shredder Machine sold with a 260 mm diameter die and a 300 mm die. It is possible to equip this machine with a 500 mm die.

Souffleuse KAUTEX H10-3 S80 2D/3D Diamètre vis : 140 mm ?Machine retrofitée en 2005

Key data: 60 mm, 25

Complete extrusion line for the production of 3-layer PE-Xb, PE-Xc and PE-RT pipes Year of Make: 2001 Available diameters: 14 x 2 / 16 x 1.5 / 16 x 2 / 17 x 2 / 18 x 2 / 20 x 2 / 25 x 2.3 Line speed: approx. 35 m/min Description: Single Screw Extruder Battenfeld BEX 1-60-30B Capacity: 200 kg/h (for PE-X) AC drive Bimetal screw and barrel: 60 mm, L/D = 25 (renewed in 2025) BMCtouch (PC has been replaced with a new one) Integration of BEX co-extruders Integration of scales and gravimetric dosing unit (DOS-3) Melt pressure and melt temperature sensor Material hopper Nozzle adapter 2 x Co-extruder Battenfeld BEX E 30.1 KSY1 x 25D Capacity: 18 – 20 kg/h (for EVOH and adhesion promoters) Nozzle Head PE-X-50 Co-extrusion ring for EVOH and adhesion promoters Vacuum Calibration V2-63 VA – 9 m Electromotive length adjustment Measurement and control of wat ...

- It consists of: - VOLCAN extruder. - Cooler with water pump, bowl of dimensions 2500 x 600 x 100 mm. - VOLCAN intermediate belt transfer: total length 1600 mm, belt dimensions 800 x 140 mm, maximum workpiece height approx. 120 mm. - Cutting station: maximum cutting length approx. 3300 mm. - 2 drives that had been added have been removed, but the machine still works. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48463-7