extrusion line for used for sale

1 piece U-shape impact protection Height: 400 mm Material thickness: 4 mm Inner dimensions: approx. 150x145 mm Material colour: yellow-black incl. 6 pieces of ground anchors NEW from Eitorf warehouse

A used sliced roll line from Kövy KA 2 with a head machine from Fortuna is currently for sale and is immediately available from the Bielefeld warehouse. The Kövy sliced roll line with Fortuna KM head machine has 4 rows. The Kövy is compact with a peel tape on planks and takes up less space than with a magazine. The head machine with flour shaker. Kövy KA 2 sliced roll line with Fortuna head machine KM4 - with Fortuna head machine KM4 - with settling tape

Forstan 10-heads multihead weigher, type: MW10S, serial number: 20140903/01, year of construction: 2014, dimensions: 1200 mm x 1000 mm x 1450 mm.

Engine Brand: FORD, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 631 Hour(s), Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 175 Kw, Rated Speed: 2500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/ford-2802-e-v8-pumpset-550m3h-used/ 17880, , = More information =, , Height: 170 cm, Type number: 2802 E V8 POMPSET 550M3/H

Engine Brand: FORD, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 56 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/ford-2714e-pump-550-bar-used/17875, , = More information =, , Type number: 2714E POMP 550 BAR

Engine Brand: FORD, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Blue , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 6.3 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 7.9 , Generator Hz: 50 , Generator Volts: 230/400 , Generator Amps: 0 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/ford-fdt10200se-generator-7-9k va-new/609, , = More information =, , Empty weight: 170 kg, Type number: FDT10200SE GENERATOR 7.9KVA

Engine Brand: FORD, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 4 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 39 Kw, Rated Speed: 2215 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/ford-fsd-425-new/138, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: FSD 425; Transport weight [kg]: 400

used Fortuna head machine KM6, 6 rows with Mehler. Easy cleaning of the parts because it is easily accessible. Capacity up to max. 4800 pieces/hour Weight range of the head machine between 35-80 grams. Dividing and shaping doughs as if by hand. Trade-in and shipping on request. -Stainless steel - 6 rows - Weight range 35-80 grams - Flour shakers

Dough dividing and rounding machine Bun press Fortuna Automat Size 3 Partial head reworked with stainless steel knife NEW Dough insert up to 2300g depending on TA Dough divider without knitting plate E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled + Spare parts service Option: Platform or chassis Maintenance contract Warranty E-Box Service Package We have a wide range of bread presses!

1986 Forte SBA 401.S 1. designation of the machine Forte band saw 400x400 mm 2. manufacturer of the machine: Forte 3. year of construction: 1986 4. intended use of the machine Sawing of metallic materials 5. current condition: Used, ready for operation on inspection TECHNCAL DATA Working range Rods and tubes up to 0 400 resp. Maximum cut-off length 600 mm Double feed 1. 200 mm Power requirement ca. 9,5 KW Sage drive motor power 4, 7 / 6 K I Gearbox for Sage drive Stober R 65VI•/ 4 Cutting speed I 12 - 50 m/min. Cutting speed Il 24 - 100 m/min. Sage belt dimension 6.200 x 38 x 1,2 mm Hydraulic oil ca. 46 Liter Viscositat 68 est bei 4□0c ca. 50 Liter (empfohlen "Curtis S 6") ca. 3.000 kg Coolant 800 mm Weight of the machine Material support height Find more here - / Contact us at -

Year of Manufacture : 2021 Model : TEMPORA 45.03L Type of machine : Edge banding machine Manufacturer: Format-4 Voltage: 400 V Phase: 3 PH Frequency: 50 Hz Current: 22.8 A Power: 14.5 kW Minimum Air Pressure: 7 bar Find more here - / Contact us at -

Good day We hereby offer you a used sliding belt conveyor belt, type ITE/P50, from the manufacturer Schunk Fördertechnik GmbH, built in 2003. The centre distance is 2300 mm, the belt width 790 mm. The drive is provided by a geared motor with drive chain. Machine documentation is no longer available. We would be pleased if this conveyor belt is interesting for you. Your service team Mertens & Frowein GmbH

Fortuna A4 nach generalüberholung. Mehr info am WhatsApp oder mail damianboruckianbox.pl +48 692 345 660

Key data: 260 mm, 3660 mm

very well preserved FORTE , at call

Shredder Brand Name: FORREC Mod. TB1000 Year 2009 N. 2 trees Diam. cutting chamber L 800 Grid holes diam.. 14 Motor Kw 15 - 4 poles B5 voltage 400V 50 Hz Overhauled in 2022: blade kits, transmission belts, bearings, gaskets.

Pallet roller conveyor Accumulating 7500-1000-840 RA2349 Conveyor length (FL): 7500 mm Roller width (RB): 840 mm Outer width/nominal width (NB): 1000 mm Roller spacing / pitch 175 mm Frame height: 160 mm Current storage space size approx. 900 mm Approx. 7 storage spaces Storage mechanism can be converted for other storage space sizes, e.g. 1200 mm for Euro pallets Length can be extended/reduced. Several units available single roller drive chain, so that several elements can be driven with one motor. for pallet weights up to 1000 kg Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 1,1 kW, 380-500 V condition: good (used) Conveying length in mm: 7500 Nominal / outside width in mm: 1000 Roll width in mm: 840 Roll division in mm: 175 Driven ...

PART NUMBER: 7531 Specifications: Equipment: -plate - Tape feeder -guillotine - glue tank (granules) - 3 pressure rollers - Ready-to-use saw-cutting unit - 2 trimming units for edge shaping (radial cutters) - 2 polishers - min workpiece length 140mm - min workpiece width 60mm - thickness of the veneered element 10-55mm - edge tape thickness 0.4-3mm - steady rest sliding out of the top - motor power 5.6kW - extraction spigot diameter 120mm - dimensions length/width/height 3480x1050x1020mm - weight about 900kg Advantages: – unpainted – made in Austria – very good condition – used edgebander Net price: 18900 PLN Net price: 4395 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

Dough dividing and rounding machine Fortuna Primus Pro head machine - Dough dividing and casting machine - Fortuna Primus Pro - 4 rows -Stainless steel - Voltage: 3x400+N Volt - Power: 1.9 kW - Frequency: 50Hz - Required fuse: 25 A - Year of construction 2013

Dough dividing and rounding machine Bun press Fortuna Automat Gr. 3+ with active shutdown Head cleaning to the back Partial head reworked with stainless steel knife NEW Dough insert up to 2400g depending on TA Dough Dividers 30 Pieces/Piece with rewind button E-system NEW DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine overhauled Option: Stainless steel pedestal Wirkteller Neu Service Package Maintenance contract Instruction & Commissioning Delivery With us you will find one of the largest selection of bun presses!

Dough dividing and rounding machine Bun press Fortuna Automat Size 4 H with active shutdown Head cleaning with hand crank Parting head newly revised 30-piece with stainless steel knife NEW Dough insert 1200 to 3600 g, Unit weight from 40 to 120 g E-system NEW DGUV V3 tested with rewind button Connection 400V, 16A-CEE plug Approx. dimensions: 710 x 730 x 1500 mm WxDxH Used machine overhauled Option: Stainless steel pedestal New Acting Plate Maintenance contract Service Package Instruction & Commissioning Delivery Come to our large bakery equipment exhibition!

ERCA Cup Form-Fill-Seal Machine – Oystar ERCA M-FFS-14 High-performance cup form-fill-seal (FFS) machine designed for efficient production and packaging of dairy and food products in plastic cups. The ERCA / Oystar ERCA M-FFS-14 offers reliable operation and high-speed output, making it suitable for industrial food processing lines. General Information - Manufacturer: ERCA - Model: Oystar ERCA M-FFS-14 - Year of Manufacture: 2011 Technical Specifications - Production Capacity: 14,300 cups per hour Cup Formats - The machine is designed for the following cup sizes: - 80 g cups - 125 g cups - 150 g cups Machine Type - Process: Form – Fill – Seal (FFS) - Suitable for automated cup forming, filling, and sealing operations Typical Applications - Ideal for packaging products such as: - Yogurt - Dairy desserts - Cream products - Other liquid or semi-liquid  ...

32000km, Diesel 2,0 l ECOBlue, Manual gearbox, 3 seater, 5 doors, white, TÜV/AU up to 3/26,...

conveyor belt, The conveyor belt is an important piece of equipment in various industrial applications, designed to efficiently transport materials through different stages of production and processing. Thanks to its robust construction and customizable design, this conveyor system can transport a wide range of materials, from bulk materials to packaged products., With adjustable speed settings and multiple width options, the conveyor can be customized to meet specific operational requirements. Smooth and continuous operation minimizes product damage and ensures safe and efficient material transport. In addition, the modular design allows for easy integration into existing production lines, improving the overall workflow., Safety is a priority, and the conveyor is equipped with features such as emergency stop buttons and guards to ensure a safe working environment, making it an ideal sol ...

Exchange units for contour milling HOMAG

new corpus turning up machine - fixed elements Brand: Formetal Type: RT.90F technical data: - fixed elements Transport input length 2.500 mm Transport output length 1.000 mm Transport width 600 mm Working height infeed conveyor 700 mm working height outfeed conveyor 250 mm Transport speed 10 - 25 m/min. (with inverter control) Different speed for load and unload max. weight 100 kg - corpus turning up machine RT.90F without electric equipment OPTIONAL: - Safety light barrier (infeed and outfeed) - electric box with SIEMENS PLC S71200 - Safety fence

Bread roll line Kövy Fortuna KM6 6-row - 6-row sliced roll line with magazine and head machine - with discharge - Fortuna KM6 Head Machine - Year of construction 2004

Manufacturer: Förderband, Working length mm: 5.800, Working widht mm: 250,

Manufacturer: Format 4, Type: Profit H20, Year: 2014, Feeding speed max m/min: X-80, Y-80, Z-20, Working range X: 3830, Working range Y-axis: 1680, Working range Z: 275, Vacuum pumps m³/h: 90, incl. tools: yes, Gesamtanschluss kw: 18, Weight approx. kg: 3350, Year :2014

Manufacturer: Bat Forum, Year: 2008, Foil stations: yes, Shrinking tunnel mm: 1400, Total connection value in kW: 4, Working width mm: 800, Year :2008

Manufacturer: Formoplast, Type: PE 100 Doppelwandbehälter, Year: 2014, Durchmesser m: 2,5, Zulässiges Füllvolumen m³: 15, Zulässiges Füllhöhe m: 3,06, Zulässiges Füllungsgrad : 95 Prozent, Betriebstemperatur Grad: 20, Befülltemperatur Grad: 30, Zulässiger Volumestrom m³/h: 72, Zulässiges Belastungswert kN/m³: 15, Füllmedium: Kauritleim, Aufstellung: im Raum, Year :2014

Manufacturer: Homag Druckzone 6-fach, Spare part from machine: KL 79, Type: Formsttrecke, Year: ca.95, Rollers: yes, Free-standing: yes, Roller size: ca 40 mm, Gluing part right side: yes, Year :ca.95

Manufacturer: Italpresse, Year: 2005, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: 2, Size of heating plate mm: 1450 x 2800, Pin system: no, Multifunktionsrahmen: yes, Automatical glue supply: yes, Year :2005