extrusion line for used for sale

Condition: Used – fully operational, excellent overall condition Power: 120 kW Engine: Diesel, 1,968 cm³ Drive: 2WD Seats: 2 Max. permissible weight: 3,500 kg Max. speed: 150 km/h Mileage: Approx. 298,400 km Registration: Full documentation available (currently registered in Croatia) Note: Engine warning light is on Auction-ID: A7-46408-7

3400PSI; rated flow 2.6GPM; 212cc; 2.6GPM; 7548 Auction-ID: A1-45902-404

Internal number 823 Auction-ID: A1-46329-14

Tilting container ENITOR type K500 Used tipping container made of galvanized steel, suitable for chips, scrap and other bulk materials. Type: K500 Load capacity: 800 kg Content: 500 l Year of construction: 2017 Weight: 150 kg The container is rollable (4 wheels), has a tilting device and is fully functional. Optical traces of use due to previous industrial use present. Dimensions: approx. 110 × 110 × 104 cm (L×W×H). Auction-ID: A7-46417-5

2x battery 20V; 9 piece drill set; screw-drill machine; angle grinder; impact wrench; nut beater; with inlay; 4 grinding wheels; in original packaging; 5596 Auction-ID: A1-45902-316

LOT 9 Type: Forklift truck Brand: Linde Model: H80D Serial number: E1X353K00231 Year: 1999 Fuel type: Diesel Operating hours: 7720 h Own weight: 12610 kg Lifting capacity: 8000 kg Mast type: Duplex Tire type: Solid rubber Dimensions: Fork length: 1400 mm; Fork width: 1900 mm; Lifting height: 5700 mm; Overall length: 3400 mm; Overall height: 3900 mm Additional information: Diesel: yes. Auction-ID: A7-46289-9

Type: Forging Pliers / Hardening Tools / Thermal Protection Name: Hardening Shop Lot Forging Pliers, Thermal Protection & Melting Shells – 25 Pieces Description: Lot from the dismantling of an industrial hardening shop. Included are forging pliers of different designs and lengths for gripping and moving hot workpieces, as well as heat-protective clothing for work on heat treatment plants, and refractory melting or casting shells. The components are intended for use in forging, hardening and heat treatment plants. Sale exclusively as a complete lot. Condition: • Used Scope of delivery: • Forging pliers, various designs and lengths• Thermal protection (heat protective clothing / apron / coat) • Melting or casting shells (fireproof) • Total scope: 25 parts• Delivery as shown • Sale as complete lot • Material pliers: steel • Pliers types: forging pliers / gripping p ...

nominal force:2500 t stroke:600 mm cycle time:13 - 18 s distance between columns:1720 mm Distance table/ram, max. stroke up, adjustment up:2600 mm table surface area:1720 x 1800 mm allowed max. force:4000 t blow die to die:5000 t ram surface:2100 x 1320 mm capacity of ejector in table:40 t ejector stroke in table:250 mm ejector surface area in table:900 x 820 mm capacity of ejector in ram:6 t ejector stroke in ram:40 mm spindle diameter:425 mm power requirement:900,0 kW weight:335,0 t Dimensions (WxDxH):3,4 x 4,6 x 9,7 m height over floor:8,3 m fully-automated forging line:to produce axle shaft

impact energy:207951 mkg ram hammer stroke:660 mm no. of strokes:100 /min impact energy:2040 kJ distance lower die block / ram gudeway:660 mm Throat:750 mm steel forging - rectangular up to:240 mm steel forging - diameter up to:270 mm power requirement:75,0 kW weight of hammer:16,5 t weight of anvil:15,5 t ram hammer weight:750 kg weight:32,0 t dimensions (WxDxH):3,2 x 1,45 x 3,45 m Mode of operation:pneumatisch

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Cat.-Nr. 11-1045 Capacity: 500 up to 1000 Litres COMPLETE For producing juice and filling in from fruits and vegetables For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Complete Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper for emptying fruits and vegetables from wood or OVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2337 – Eurolux Automatic Continuous Belt Press EL-500 for producing fruit juice and fruit wine, cider from apples, pears Capacity: 500 up to 1000 kg/h Cat-Nr 06-1101 – Eurolux Floating Lid Tanks 2 x 1000 Litres Floating Lid Tanks 2 x 500 Litres Floating Lid Tanks 2 x 300 Litres Floating Lid Tanks Cat-Nr 10-2350 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 10 ...

Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t

1 x Adamson 96in wide x 32in dia 4 roll Z Calender line, peripherally drilled rolls with oil heating, motorised nip adjustment to rolls 1,2 and 3 (roll 4 fixed). Cross axis roll 4. Hydraulic pre-load to all rolls, Adjustable stock guides, rubber coated pressure roller with hydraulic adjustment and v/s motor to roll 4, with Adamson unidrive gearbox on universal couplings, with 500HP, 850/1300rpm, 785A, 500V, 3ph, 60Hz Reliance DC variable speed motor to rolls 1, 2 and 3. 200HP, 850/1400rpm DC variable speed motor to roll 4. 1 x Embossing station 1 x set of 8 x 96in wide x 24in dia stainless steel cooling drums. 1 x Dual turret winder. Full drawings available. We can supply the upstream equipment I.e. internal mixers that fed the calenders, along with the batching and material handling/dosage equipment. Complete line available in very good condition previously us ...

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

Used line for packaging of powdery materials in plastic buckets from 2.5 kg to 10 kg. Semi-automatic line of packing and transporting the dispenser weight The line consists of: Two unloading of big bags Oblique conveyor The buffer tank Two batchers Stacking conveyor The set of the transporters with the balance cruise control, feeder lids and closing buckets, made as part of the line for packing powdery materials. The line consists of: Conveyor separator Cruising verified checkweigher Discriminator transporter odstawiaj?cym Conveyor feeder lids Crimper Stacking Conveyor Appetizer - welding machine for bags The checkweigher DWT / xx Technical data: Supply voltage - Uz = 230V Isaiah znamionowy- current = 2-5A (depending on version) Mains frequency - f = 50 Hz overcurrent - F = 10A recommended network layout -TNS Insulation class - I New 2010

An entire line for sale

STRIP THICKNESS: 0.5-5 MM, SHHET LENGTH: 2 - 4 M,

STRIP WIDTH: MAX. 160 MM; THICKNESS RANGE: 0.5 - 3.0 MM, TUBE OD.: 12 - 50.8 MM, TUBE LENGTH: 3-6 M, TIG-TRICATHODE + LASER ROFIN SINAR 6 KW

RAIL LENGTH: 5 - 60 M, CONTINUOUS MEASURING, 6 LASER MEASURING HEADS, SPEED: 1 M/SEC., MODERNISED IN 1992

Liners Wear less than 0.05

Recon cylinder liner

Bushing obsolete, recon

Comerio Ercole 1500mm wide x 550mm dia 4 roll inverted L calender. Peripherally drilled rolls (high pressure hot water heating), Motorised nip adjustment, Adjustable guides, Cross axis to roll 3, Unidrive gearbox with universal couplings. Motor power: Roll 1 and 4 - 50kW. Roll 2 and 3 - 60kW DC variable speed. Oil lubrication.

Liner without APR - almost new

SACMI line for crown corks.

Type: Jumbo KODUKO 16-500 / DF510 / SKM103-03 Capacity: 2500 kg / h Cooking time: 120 min Type: Schroder DF510 Hopper diameter: 600 mm Hopper lenght: 520 mm Power: 0.12 kW Type: Schroder SKM103 Dimension: 2500 x 3375 x 2510

new cylinder liner for Deutz 545

SACMI rotary compression line for plastic caps 38 mm. with control video system.

Used line to grind, capacity 300-600kg / h. (depending on the product) The line is equipped with: - Mill REKORD - Cyclone Filter - Centrifugal fan for air transport.

ULTRASONIC INSPECTION - TESTQMATIC - TYPE: SPA-2N, L=5-60 M, 1 M/SEC., 1988 EDDY CURRENT INSPECTION - MPA - 1989 RAIL PROFIL MEASURING DEVICE - SCHMITZ & SÖHNE AND BSB - 1989 PRODUCT HEIGHT: 95-165 MM, HARDWARE & SOFTWARE

new cylinder liner for MWM 348

1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.

Reconditioned cylinder liner for Deutz 528

New cylinder liner for Deutz 545

Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002

COMPLETE HIGHSPEED SAWMILL LINE (capacity 80 000 fm): HIGH PERFORMANCE SASH GANG SAW ESTERER EWD HDN 600 WITH BV..

Qty. 2 Second-hand pickling lines Mfc.: Sundwig Built: 1968 Tank of clean HCl: 50 m³ Tank for dirty HCl: 50 m³ Strip width: 1525 mm Qty. 3 Tanks interconnected one for each bath 310 m³ Qty. 3 Baths HCl 152.5 m Double bath pre-washing water Bath for final water washing Heater Chimney for taking out the acid vapors Acid pumps Auxiliary pumps Leveling machine Mfc.: AEG-EMG Built: Oiling machine Mfc.: Sundwig Built: Coiler Mfc.: Sundwig Built:

Complete coffee roasting and packaging line consisting of: coffee bean silos, coffee roaster, coffee mill, vacuum packaging machines (125 gr, 500 gr , 1000 gr) Price new 1.200.000 Euro For sale, price on request

Many thanks for your interest on our second hand machines, please find follow our offer: Complete Waffle production plant, consiting of: manufacturer : Danger Wafer oven Type : WM 52 plates YOM : ca. 1975 - 1980 heating : natural gas or propane waffle sheet : 470x290 mm deep karee different : automatic sheet take off : Cooler and Fully automatic Hebenstreit WZ-EM wafer spread line for two colours manufacturer : Hebenstreit Type : WZ-EM YOM : 1991 output capacity : up to 50 sheet/min. wafer format : 290 x 470 mm bis 350 x 480 mm dimensions : ca. 11000 x 1300 x 1700 mm different : Film- und Kontaktstreichverfahren consisting of: - wafer magazine - First WZ Cream station - cover station - second WZ cream station - stack station - cover station - Pressing device We offer this machine in 'as is' condition, without warranty, ex Ware ...

Qty. 1 Second-hand JCO pipe welding line Mfc.: Korean Company Installation date: 11 - 2008 Production types: KS, JIS, ASTM, API, Material: API 5L. 2B.X-80under mild steel Product capacity: 70,000 ton/year Product size O.D.: 406 – 1676 mm - 16”~66” Length: 5~16 m Wal Thickness: 9~80 mm Voltage supply: 440 V or 380 V, 220 V, 60 Hz Manufacturing process: Plate stacking Edge Milling Pre Bending Press Forming Tack Welding Welding Calibration Machining Pipe Ends Hydro Static Test NDT (RT & UT)

Board repair line with double end profiling line in top condition Workpiece parameters of the plates: Min.: 900 mm x 200 mm Weight min. : 17 mm Max .: 5000 mm x 1250 mm Max. Weight: 60 mm Weight: max. 150 kg < Accuracy: +/- 0.2 mm The portals have a max. Clock power of: max. 6 cycles / min The max. Partial performance: 18 parts / min (DEP line) Year of construction 2008 Condition: good (Original price of the line 2008 Euro 4.9 million) Consisting of: Feeding station with feeding rollers, Automatic vacuum lifting table for lengths up to 6 m Conveyor systems Repair line 1 Turning station Transfer service Repair line 2 automatic vacuum lifter for stacking (6m) Stacking roller conveyor Control cabinet with machine control Profilfraessanlage Stacking Tables; very well

PRECAST LINE VOLLERT FILIGREE AND DOUBLE WALL LINE precast Filigree and double wall production

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

Thank you for your interest in our gum extruder system we offer you as follows: many thanks for your interest on our new chewing gum extruder plant, please follow our offer find: AUTOMATIC EXTRUDING; ROLLING AND SCORING MACHINE 7 ´ ´ /. COMPLETE LINE for production of chewing gum sticks and Chiclets Manufacturer: WLS Type: Chewing gum Extrudier-, rolling and cutting machine gum extruder, rolling and cutting system Product: Chewing gum sticks and Chiclets Size (working width): 7 ´ ´ / 177mm other dimensions are possible on demand Type: WLS RAS 7 "with manual take-off Capacity: Approx stick gum. 200-250 kg / h / Chiclets approx. 250-350 kg / h Number of rolling stations: 4 Number of cutting stations: 2 Electrical: 400V 3 ph 7 "ROLLING AND SCORING MACHINE incl. EXTRUDER Conveyor belt is covered with powderin ...

Linear axis for KUKA KR6/16 KUKA KL1000 CV high Built in 2007 Length 4500mm .

Linear axis for KUKA KR15, KR6 Length 2m .

welding line for galvanized and black pipes.

Rice Robotics incl 2 x 2 axis robot control cabinet / control absolutely mint condition Year 2009 (ca 300 hours run) Height approx. 2.0 m Width ca of 4.0 m consists of: 2 columns 1 driving beam 2 x 2 axle robot 2 Robotics control cabinets Switching and control documents