extruding used for sale

Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, new price 150,000 € Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.

Hard PVC pipe extrusion plant for tubes D28/D30/D33, consisting of: Battenfeldextruder B45-24 d, ESDE tube crosshead K 010, vacuum calibration with water bath, Graewe-band trigger BA63, Graewe Abstech-and at chamfer machine STS50, various sleeves, cores, calibrations and jaws, as well as additional tube crosshead Battenfeld RS 8-40

Krauss Maffei KMD120 extruder - efficient - year of manufacture 2002 - Screw diameter: 120 mm parallel - L/D: 23 - capacity: 600 - 700 kg/h - the scope of general renovation in 2011 carried out in our company - new AC 90 kW motor, controlled by a new vector inverter - new control cabinet equipped with new heaters, new housings, new fans, - new thermoregulation cabinet equipped with SSR + new regulators - new plasticizing system, - number of heating zones: cylinder (5), connector (1), head (3) - reducer after reconditioning - drive synchronization system: extruder, dispenser - equipped with a pressure and temperature sensor. -Dimensions; length x width x height = 530160170cm + hopper - Extrusion axis 1200mm

Complete extrusion line with support for sale, dispense, extrude, granulate and SAG (complete pictures in the PDF). Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF and impact resistant modified products. Thyssen TGE 3-72-DOS-4 transmission, 314 kW Compexmotor, 4 degassing zone with 3 vacuum degassing, 3 body parts open side feeder, new price from 690.000 € Dosage: Dosage: 6 Brabender dosing scales with control, multiple pellets/Flake car, 2 powder scales, a fiberglass scales, Transitube support for glass fibers Side feeder: Feddem/Flender Vacuum pump: Integrated Granulation: IPS SG120/7.5, 2000, 9 kW Also here: Complete solid steel frame for the feeders and water bath brushes, bagging Tower for granules with S + S all metal separator, Transitube glass fiber/material high to promote

Nr. 03 SINGLE-OVITE EXTRUDERS DIAMETER 100 Nr. 01 HEAD CONSTRUCTION 2 LAYERS

CALIBRATION TUNNEL COOLING TUNNEL LOADING TUNNELS EQUIPPED FOR DIAM TUBES. 20 TO 160 MM HOURLY PRODUCTION: 280-300 KG/HOUR

Saw for Pipe Cincinnati RS 25 PZ S 1992 year 4000 Euro

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Twin Screw Extruder Metalchem 2T9/4,5 for PCV, Made by Metalchem out-put 100 kg/h

Compounding extruder Material: PE, PP, PS, ABS + fillers / Details: dcising, segmented screws and cylinders, degassing, vacuum pump, screw speed max. 300 rpm, DC motor 252 kW, heating power 98 kW, incl. side-feeding Leistritz LSB 90 (screws 2x x 90 mm, drive: 3.0 kW, screw speed: max. 150 rpm), Macromate SPS visualization. (attached photos are BEISPIELBILDER)

Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.

Material: PVC // Details: DC motor 27 kW, degassing, counter-runner, capacity approx. 150 - 200 KG/hr.

Material: PVC // Screw diameter 52-104 mm (conical), counter-rotor, motor: 15 kW, capacity: 20 - 140 KG/hr.

Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.

Hollow-chamber plate system Material: PC, PP Extruder: Breyer Screw diameter: 120 mm, L/D: 33 Engine: 200 kW with degassing, Siemens "Simatic OP17" PLC control, vacuum station with water ring pump and condensate pots, sieve changer Gneuß SF75, melt pump Maag 56/56, calibrator OMIPA 2400 mm, 10-fold multi-roll extractor OMIPA, 2 roll extractor OMIPA, protective film laminating station, hot-knife longitudinal separation, OMIPA cross saw 2400 mm R

Material: PE, PP, PS, ABS, // Details: DC motor: 93 kW, degassing, screw diameter 115 mm, L/D 26

Material: PVC // with degassing, counter-rotor, DC motor 29 kW, screw diameter 86 mm, L/D 16 Capacity: 150 - 250 KG/hr

Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC

New laboratory extruder 25/25 LD Extruder Motor - AC Motor 2.2kW Water bath - 1000 mmm Granulator for a strand

Single-screw extruder • Type: 120/28 LD • AC Motor - 75 kw • Screw speed: 150 rpm. • Extruder cylinder: Air-cooled • Degassing zone Sieb changer • Strandhead Water bath: 4.5 m Granulator SG 200 Classic sieve Silo with conveyor fans: approx. 1m3

see pdf attached

We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 52. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us.

Automatic double wheel reel suitable for pipes from 10-32 mm OD Manufacturer: NEXTROM /Maillefer Type: MWB 1300G Year of construction: 1998 Condition: "as it is", ready for operation.

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)

pdf attached

Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)

see PDF attached

Vacuum Corrugator suitable for the production of single-wall corrugated pipes from 4.5 – 25 mm AD designed for 90 pairs of moulded jaws Manufacturer: MAINTOOLS Type: Inovo 25/90 BV Year of construction: 2008 Condition: cleaned and functionally tested!

manufactured in China with german overhead and according to europ. Standards

We can offer you a complete line of Breathable menbrance extrusion line,manufactured by Colines,Italy in 2009,the line has just installed and adjusted,never used for production,like new line.the products-- breathable menbrance is for making diaper and hygienic materials.the net web width is 2850 mm,2 extruders,a 90 mm and a 150 mm,,serious buyer contact us,please Please visit manufacturer's website: .colines.it to learn more about this line.

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Key data: 130

Extruder 1 spindle : 130 mm Ø, 35 L / D, for grancear plastics, brand: Plasco, with forced feeding. Degasser, with vacuum pump: 15 hp. Filter changer: 260 mm, overhead cut to water. Vibrating screen and motor: 238 KW with variable speed drive and electrical panel. GT-2982

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

Key data: 120

Extruder 1 spindle: 120 mm Ø, 35 L/D, for graining, brand: FBM Falzoni, with degasser. Vacuum pump: 5.5 Kw, Hydraulic filter changer: 160 Ø. Overhead cut to the water and centrifuge. Extruder motor: 180 Kw, with variable speed drive.

Key data: 60

Extruder 1 spindle: 60 mm Ø, 25 L/D, brand: Flag. No motor, no electrical panel, with 6-speed gearbox.

Key data: 125

Extruder 1 spindle: 125 mm Ø, 35 L/D, brand: Eurotecno, with forced feeding, degassing. Motor: 160Kw, hydraulic filter changer: 250, wire head. Bathtub and noodle, Brand: RIETER 200. Year: 1999. Production: 500Kg/h.

Key data: 50

Extruder 2 spindles: 50 mm Ø 12 L/D, motor: 4.5 kw, without electrical panel.

Key data: 120

Extruder 1 spindle for manufacture of pellets. 120 mm Ø, 35 L/D, brand name: FBM ( Falzoni), type: ETF 120 V 380/5L, year: 1988. Engine: 200 KW. Degasifier and filter changer. Head cut under water, year: 2006, brand: PRT and force-feeding silo.

Extruder 2 spindles 18L/D, model: BK-50-93, tapered spindles, brand: Volcano, with motor: 25hp, with variable speed drive. Degasser and dispenser of material and electrical panel.

Key data: 50

Extruder 2 corrotating spindles: 50 mm Ø, 40 L/D, brand: ICMA SAN Giorgio, with double degasser. Motor: 57.5 Kw direct current with drive. Material dispenser and thread head (spaghetti), with electrical panel.

Key data: 60

Extruder 1 spindle: 60 mm Ø 32 L/D, Amut brand, variable speed motor Elektra Faurndau: 7 to 24 KW, with electrical panel and wire head for pellets: 23 holes and electrical panel.

Key data: 120

Extruder 1 spindle : 120 mm Ø 35 L/D, make: Union, motor: 110 Kw (150 hp). 4.2 m. long. With degasser, filter changer: 220 mm, overhead cutting to the water with centrifuge and screen. Electrical panel with variable speed drive.

Key data: 120

Extruder 1 spindle: 120 mm Ø, 35L/D, brand: Union, with degasser, hydraulic filter changer: 150. Year: 1987.

Line for complete PE pipe, with automatic dropper inserter. Brand: TRIMEC. Year: 1994. Composed of : A.-Extruder TRIMEC TM 75/30D. Engine: 57.5 kw. Hopper loader. B.-Head for tube. C.-Loader system drippers, with accumulator tank and insertion of TRIMEC drippers. D.-Vacuum bathtub and stainless calibration: 5 meters VC/1. E.-Stainless cooling bathtub: 5 meters. VR/1 F.-Stainless cooling bathtub: 5 meters. VR/1 G.-Interline drill with guillotine TRIMEC DRTS PERFORATING DEVICE. Type GF/1. H.-TRIMEC stretch trolley: 2 TR/1 bands. I.-TRIMEC winder, type: ML3/1.

Key data: 90

Extruder 1 spindle Brand: Eurotecno, 90 mm Ø, 33 L/D. Electrical panel, filter changer: 160 mm, wire head for graining, stainless bathtub: 3 m, without motor. Eurotecno noodle model G-400 with blades: 300 mm.

Key data: 60

Extruder 1 spindle: 60 mm Ø, 25 L/D, brand: Safinio, motor: 20 hp, variable speed drive, brand: Omron, model: F7, alternating current: 30 kw and electrical panel.

Key data: 130

Granceado line (pelletized) Extruder 1 spindle, brand: Previero Sorema 130 Ø 35 L/D, motor: 250 Kw with variable speed drive. Degasser, hydraulic filter changer: 215 mm, overhead cutting to water, centrifuge, discharge cyclone, tromel: 1 m, rotary valve, solids transport vacuum cleaner. Forced feeding with silo: 11,000 l. with remover. Exit cyclone for dust.

Key data: 60

PE pipe extrusion line - 1-screw extruder: 60 mm Ø, 28 L/D with motor: 37 KW (50hp) with AC speed variator, electrical panel with tube head for 16 and 20 mm. - 3 m vacuum and cooling bathtub with vacuum pump: 5.5 hp. - Cooling bath: 2.5m - Drag trolley (Track): 800 x 100 with variable speed drive. - Minimum inner double coil winder: 330 Ø maximum external 1,200.

Key data: 65

Extruder 2 corrotating spindles: 65 mm Ø, 30L/D, brand: Maris, model: TM-65 V. Shirt and spindle compatible by segments. Degasser, motor: 90 KW DC, with variable speed. Thread head and 2 spare spindles.