extruder pelletizer used for sale

DRY PELLETIZER FOR PVC AND COMPOUNDS Suitable for extruders with production rate up to 200 kg/h, made in sturdy steel and mounted on a frame equipped with wheels for easy disassembly, granulating chamber in horizontal axis, built in stainless steel, quick opening safety device, knife-holder with fluctuating star to reduce knives consumption., self adjusting knives to nozzle by means of a slide system which keeps knives pressed on the die, reducing wear 2,2 kw drive, 3.000 rpm with extra strong bearing and long shaft, cutting die in anti-wear steel with number and Ø of holes bespoke to project. 1,5 kw Venturi blowing system + pipes and cyclone, n.2 thermoregulation areas, knife mounting template, electric cabinet and touch screen control board with modem for remote assistance, 3 mt.cable machine/panel, flange built to design to fit your extruder, heated by ceramic heating elements , temp ...

UNDERWATER PELLETIZER, up to 1.400 kg/h with soft and rigid PP max 30 MFI, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger holder unit with blade pressure adjustme ...

UNDERWATER PELLETIZER, for rigid and soft PP max MFI : 30 (and more), electrical heater max 14,6 kW, n.2 thermo regulating zones, A pressure transducer and a melt temperature transducer are mounted on the purge valve. The purge valve is controlled by a hydraulic cylinder connected to a hydraulic power unit with a 2.2 kW motor., Steel die with brazed tungsten carbide plates. A conveyor cone for the molten polymer is installed inside., stainless steel granulation chamber, Impeller shaft with 11 kW 2-pole drive motor (3000 rpm nominal, 4000 rpm max) controlled by an inverter with rpm variation and speed readout on the panel. The shaft output side has special seals and a labyrinth and safety water drainage to protect the motor bearings. The impeller motor is integral with a slide sliding on rolling guides, operated, via a recirculating ball screw, by a manual handwheel equipped with a positi ...

UNDERWATER PELLETIZER, suitable for a variety of materials, among which PE PP PS ABS TPE, etc., up to 2.500 kg/h, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger h ...

STRAND PELLETIZER, 100 mm wide rotor,, 170 mm Ø,, for max n.12 strands, fixed pitch, for up to 200 kg/h capacity, 3,0 kW drive, belt transmission, speed variation through inverter, pneumatic piston to regulate pressure on roll, electric panel on the structure of the machine, hinged cutting chamber, can be totally opened, n.30 knives, Soundproof panel on cutter protection hood, Base mounted on wheels, User’s manual, CE compliance, Dimensions LxWxH 0,86 x 0,92 x 1,57 mt., Weight abt: 280 kg., installed power - used power in work: about 60-65% : 3,0 kw, availability: 60 working days from confirmation, working width: 100 mm, capacity: up to 200 kg/h, conditions: new machine, type: strand pelletizer

STRAND PELLETIZER 250 mm., Variable pitch, with synchronized pull off unit, 4 kW motor, 4 poles, IE3 motor drive, 1.1 kW motor on pull off unit, Transmission belts, Speed variation via inverter, Electrical panel compliant with CE standards - 400 V, 50 Hz with, 2 x 16 Amp sockets, width 250 mm, Rotor with 12 micrometrically adjustable rotating blades, Counter-blade made in widia, Hardened pressure roller, diameter 60 mm, straignt knurling, Hardened drive roller, diameter 40 mm, straight knurling, Pneumatic piston for presser roller adjustment, Chrome plated parts in contact with the material, Stainless steel discharge, Limit switch with safety lock, Mounted on anti-vibration support with sound proof panels, installed power - used power in work: about 60-65% : 5,1 kw, availability: 70 working days ca, working width: 250mm, conditions: new machine, type: strand pelletizer for extruders

STRAND PELLETIZER 250 mm., Fixed pitch, 4 kW motor, 4 poles, IE3 motor drive, Transmission belts, Speed variation via inverter, Electrical panel compliant with CE standards - 400 V, 50 Hz with, 2 x 16 Amp sockets, width 250 mm, Rotor with 12 micrometrically adjustable rotating blades, Counter-blade made in widia, Hardened pressure roller, diameter 60 mm, straignt knurling, Hardened drive roller, diameter 40 mm, straight knurling, Pneumatic piston for presser roller adjustment, Chrome plated parts in contact with the material, Stainless steel discharge, Limit switch with safety lock, Mounted on anti-vibration support with sound proof panels, installed power - used power in work: about 60-65% : 4,0 kw, availability: 70 working days ca, working width: 250 mm, conditions: new machine, type: strand pelletizer for extruders

PRT WATER RING PELLETIZER, for PE PP PS PC ABS, nominal capacity 600-700 kg/h (tested up to 900 with PS), N.4 cutting blades, N.1 thermoregulation zones, Heating power 8.00 kW, Cutting motor power 4.00 kW, N.1 water pumps, heat exchanging unit, Single water pump power 3.00 kW, Vertical centrifuge power 5.50 kW, Steam vacuum power 0.25 kW, soundproofed discharging cyclon, Total installed power 20.75 kW, constructed in 2006, only 200 worked hours, installed power - used power in work: about 60-65% : 20.75, availability: immediate, capacity: 600-700 kg/h (tested with PS 900 kg/h), PRESENT CONDITIONS: as new, excellent quality, price is less than 50% of a new one

STRAND PELLETIZER 300 mm., Machine totally reconditioned, 7.5 kW motor drive, Transmission belts, Speed variation via inverter, Electrical panel compliant with CEI standards - 400 V, 50 Hz, Feeding width 300 mm, fixed pitch, 30 cutting pieces on rotor, widia counter blade, Rubber pressure roller, Cross-knurled tempered drive roller, Double pneumatic piston for pressure roller adjustment, Wire feed roller bench, installed power - used power in work: about 60-65% : 7,5 kw, working width: 300 mm, conditions: as new, type: strand pelletizer for extruders

STRAND PELLETIZER, For extruders 500 to 1500 kg/h, width 350 mm., fixed pitch, Counter-blade with 2 cutting edges,, 11 kw drive Supporting structure made in sturdy steel with sides made in special alloy. Group of dandy rolls to guide the streams Lower roll in cemented steel Upper, pressing roll made in nitrated steel, pneumatically lifted Asynchrone drive with inverter Cutting unit with dual cutting edge Made in anti-wear steel Electrical control panel with general switch,service switch and amperometer Adjustable speed Rotor diam. 240 mm. N.28 teeth on rotor Include n.1 extractor, User’s manual, CE compliance, installed power - used power in work: about 60-65% : 11 kW, availability: 60-70 working days ca, working width: 350, capacity: 500 to 1.500 kg/h, conditions: new machine, type: fixed pitch

Thank you for your interest in our gum extruder system we offer you as follows: many thanks for your interest on our new chewing gum extruder plant, please follow our offer find: AUTOMATIC EXTRUDING; ROLLING AND SCORING MACHINE 7 ´ ´ /. COMPLETE LINE for production of chewing gum sticks and Chiclets Manufacturer: WLS Type: Chewing gum Extrudier-, rolling and cutting machine gum extruder, rolling and cutting system Product: Chewing gum sticks and Chiclets Size (working width): 7 ´ ´ / 177mm other dimensions are possible on demand Type: WLS RAS 7 "with manual take-off Capacity: Approx stick gum. 200-250 kg / h / Chiclets approx. 250-350 kg / h Number of rolling stations: 4 Number of cutting stations: 2 Electrical: 400V 3 ph 7 "ROLLING AND SCORING MACHINE incl. EXTRUDER Conveyor belt is covered with powderin ...

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Francis Shaw 90mm coldfeed rubber extruder.Year: 1992. Machine No.4846Vented. Side power roller feed,L/D ratio 20:1,H series David Brown gearbox,Thrige Scott 63kW, 2000rpm DC variable speed motor.Machine fully overhauled, cleaned/painted and fitted with NEW electrical control panel. With provision for 5 x TCU's.

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

Dominioni Punto & Pasta Pasta extruder machine Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile

available Troester Triplex Extruder Top machine QSM 90x 16D Middle machine 200W x 6D Below machine QSM 150 x 16D Head MW500 Description attached!

Combex 90 Strainer Extruder Manuf.: AZ / VMI Screw diam. 90mm LD ratio 10-1 AC motor 37kW 1475rpm Year 2010 Complete with Temperature Control Unit and Controls Full manual / documentation available

Z Blade Stainless Steel Mix Extruder Manufacturer: Winkworth Model: 14Z HMX Working capacity 22-25 litre Approx total volume of trough litres: 32 litre with Hasco Hydraulics Ltd power pack With Panel YOM Jan 89

Z Blade Mix Extruder Manufacturer Winkworth Model 31Z HMX Mild Steel Total volume 360 litre Working capacity 250 litre Internal dims: 740mm long x 790mm wide x 714mm deep Screw 220mm With oil jacketed trough Lagged and with 3x electric drives

WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mixer, ABA co ex block with plate type inserts, 1.650 mm 3 roll polishing stack model 18x65 LHSL. 450 mm diameter rolls. Chain driven through selector gearbox. circa 5 hp dc motor. Upstack configuration ...

UNION SINGLE SCREW EXTRUDER, barrel with 150 mm Ø screw, 40 L/D, electric cabinet, degassing system, nominal throughput rate ca.700 kg/h, missing of screenchanger - available semi-automatic on separate offer, missing of cutting unit - possible addition of strand/water ring/underwater on separate offer, This is an evergreen sturdy extruder

BANDERA SINGLE LAYER BLOWN FILM EXTRUDER, for LDPE MDPE + RLDPE, 3-stations Piovan volumetric dosing uniit, Screw diam. 80 mm., 200 mm. die, dual-flow Garba Plast head 200 mm (new in 2022), pull off unit, single rewinding unit 1.200 mm. wide, c.a.drive with new inverters, Average throughput rate 100 kg/h, The line can be inspected any time., Recently used for garbage bags, it includes a 1-color printing group, corona treatment, tower included, electric cabinet for conplete management, immediately available, availability: Immediate, PRESENT CONDITIONS: running and testable, ACCESSORIES: corona treatment+1-col. printer

General SKU204U026 LocationBarneveld MakeWerner & Pfleiderer TypeZSK 58 F96E Mach.No.231616 Sizes Screw diameter57.8 mm Main Features Motor74 KW Inlet diameter100 mm L/D27 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter57.80 L/D27 Co-rotatingcheck Ventedcheck Water coolingcheck AC-motorcheck Screw speed191 rpm MaterialNitriding steel 1.8519 Information Year of construction1995 With switchgearcheck (as is) Floorspace2.5x1.4 m Total height1,5 m Extra Specificationsthe currently installed head” on the extruder is a cleaning head. this is not a die. - there are 2 screw shafts present. - no screw segments present. - this extruder comes with brush screws. - the extruder comes with 4 extra housing segments. this extruder was part of a complete system. any associated machines are: Collin Calander Pharma 200x400 , sku: 204U929 Sol ...

General SKU359W975 LocationBarneveld MakeLeistritz TypeZSE 27HP-PH-40D Mach.No.3899 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck 9x DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm Feeding with metering screwcheck K-tron Exchangeable segmentscheck Number of temperature controllers:1 Used oncarrier material Capacitymax 200 kg/h MaterialStainless steel, Stainless steel 2.4819 (Hastelloy C-276) Information Year of construction2010 With switchgearcheck Total height1,80 m CEcheck Floorspace3,65 x 1,15 m Weight1200 kg Extra Specifications- This extruder has been used for testing carrier material. No API was produced/ us ...

General SKU354T968 LocationBarneveld MakeWerner & PFleiderer TypeContinua 37/27 D Mach.No.220331 Sizes Screw diameter37 mm Main Features Motor7.6 KW L/D27 Specified Features - Double screw extruder Double screw extrudercheck Number of hours284222 Screw diameter37 mm L/D27 Co-rotatingcheck Number of heating zones:5: 1 cooling: 4 heating Steam heatingcheck DC-motor7,6 kW 440 Volt With variable speed drivecheck Screw speed0-400 rpm Exchangeable segmentscheck Number of temperature controllers:5 MaterialMild steel Information Year of construction1985 With switchgearcheck (as is) Total height2,3 m Floorspace3,2x1,3 m Weight1700 kg Extra Specificationswith extra screwsDouble screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...

General SKU368W1091 LocationBarneveld MakeWerner & Pfleiderer TypeZSK 30 W 9/2 Mach.No.219522 Sizes Screw diameter30 mm Main Features Motor10.4 KW Inlet diameter60 mm L/D33 Specified Features - Double screw extruder Double screw extrudercheck Number of hours8013 Screw diameter30 L/D33,3 Co-rotatingcheck Number of heating zones:8 Electric heatingcheck AC-motor10,4 kW, 440 volt With variable speed drive200-2200 rpm Screw speed4,4:1 Feeding with hoppercheck MaterialMild steel Information Year of construction1985 With switchgearcheck Total height1,30 m Floorspace2,80x0,85 m Weight1100 kg Extra Specificationshomogenizing extruder with spareparts. Double screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...

General SKU397W1236 LocationBarneveld MakeWeber TypeCE-03 Mach.No.CE 3061 Sizes Screw diameter35 mm Main Features Motor18 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours50927 Screw diameter35 L/D20 Counter rotatingcheck With vacuum pump0,75 kW, 8 m3/h, 2850 rpm Number of heating zones:1 Electric heatingcheck AC-motor18 kW, 220/380 volt Number of temperature controllers:7 Used onPVC Capacity30 kg/h Information Year of construction1985 With switchgearcheck Sizes switchgear0,75x0,37x1,10 m Total height1,50 m Floorspace1,70x0,90 m Weight700 kgDouble screw extrudersWeberExtruders > Double screw extrudersBrand > Weber What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU340U844 LocationBarneveld MakeBerstorff / Brabender Typedoppelschneckenextruder DSE 25 Year of construction1994 Sizes Screw diameter25 mm Main Features Motor6.5 KW Inlet diameter40 mm L/D32 Specified Features - Double screw extruder Double screw extrudercheck Number of hoursunknown Screw diameter25mm L/D32 Co-rotatingcheck Ventedcheck Number of heating zones:7 Electric heating±15kW Water coolingcheck weinreich- industriekühlung, 12kW, 1994 DC-motorcheck 6,5kW Screw speed240rpm Feeding with hoppercheck Exchangeable segmentscheck Number of temperature controllers:8 Capacity40kg/h Materialstainless steel 1.4122, Stainless cast steel 1.4027 Information With switchgearcheck(as is) Floorspace2,6x0,9m CEcheck Total height1,5m Weight890kg Extra SpecificationsMaximum torque of extruder screw per piece: 90 Nm. Maximum temperature: 400°C. Maximum me ...

GAMMA MECCANICA AF EXTRUSION LINE (photos and video taken before reconditioning - video includes shredder+granulator available separately), for LDPE LLDPE HDPE PP PS PC ABS, Nominal production rate : 900-1100 kg/h (this varies on material and feeding rate), Average energy consumption : 0,23-0,28 kwh/kg, inlcuding :, Buffer silo, screw conveyor, crammed feeding system, extruder with 160 mmm. screw 36 LD, double degassing system, hydraulic non-stop screenchanger 160/300MF, water ring pelletizer type TFD1000, centrifugal dryer, always ran with clean production scraps, very good running conditions - connected, The line is offered AS IS, See [Constructors page](.gamma-meccanica.it/en/plastic-recycling/plastic-recycling-af/) for more info, options available: reconditioning, capacity: 1.000 kg/h, type: for LDPE HDPE LLDPE PP PS PC ABS

General SKU231U203 MakeLeistritz TypeSZE-50 GL Mach.No.94.91.2168/7 Year of construction1994 Main Features Motor52 KW Inlet diameter49.7 mm L/D40 Specified Features - Double screw extruder MaterialNitriding Steel 1.8550 Double screw extrudercheck Number of hours31783 Screw diameter49,7 mm L/D40 Co-rotatingcheck Number of heating zones:9 Electric heating33 kW Water coolingtype: ZIK - (Zylinder Intensiv Kühlung, eng. Barrel intensive cooling) DC-motor46 kW, 460 Volt AC-motorside dosing screw of the extruder: 1,5 kW 230-400 Volt Screw speedmax. 400 rpm Information LocationBarneveld Sizes switchgearcheck(as is) Floorspace4,26x0,80 m Total height1,9 m Weight2000 CEcheck Extra Specificationspower cabinet dimention: 2,26x0,62x2,2 m Gleichlauf GL Double screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- M ...

General SKU281W438 LocationBarneveld MakeLeistritz Sizes Screw diameter30 mm Main Features Motor16 KW Inlet diameter65 mm L/D30 Specified Features - Double screw extruder MaterialStainless steel Double screw extrudercheck Number of hours3457 Screw diameter34 L/D30 Counter rotatingcheck Ventedcheck With vacuum pumpcheck Number of heating zones:6 Electric heatingcheck DC-motor3 kW (380 V) Screw speed110 rpm Feeding with hoppercheck Exchangeable segmentscheck Information TypeLSM-30 34 GG Mach.No.330182401 Year of construction1990 With switchgearcheck Sizes switchgear700 x 500 x 450 mm Floorspace2,75 x 0,91 m Total height2 m Weight1000 kg Extra SpecificationsScrew Dia. 34 mm, center distance 30 mm, screw thread depth 4 mm, 6 heating zones, 7 cool zones, gear speed 2200 rpm / I=20 rpm, Resotec control, extrusion pack Double screw extrudersLeistritzExtruders  ...

General SKU359W976 MakeLeistritz TypeZSE 27HP-PH-40D Mach.No.3778 Year of construction2008 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder MaterialStainless steel 2.4819 (Hastelloy C-276) Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm Information LocationBarneveld With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg CEcheck Extra Specificationsthis unit comes with: -2x k-tron feeders. - control cabinet. - 3x temperature control units. - extruder barrel lift - spare parts Double screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in working condit ...

General SKU252X212 LocationBarneveld CEcheck Sizes Screw diameter15.6 mm Main Features Motor1.25 KW Inlet diameter30 mm L/D25 Specified Features - Double screw extruder Double screw extrudercheck Number of hours2070 Screw diameter15 mm L/D25:1 Co-rotatingcheck Number of heating zones:2 Electric heatingcheck DC-motor1,25 kW, 220/400 volt With variable speed drivecheck Screw speed500 rpm Feeding with hoppercheck Feeding with metering screwcheck vibro Number of temperature controllers:2 MaterialNickel alloy (201) 2.4068, Stainless steel 1.4552 Information MakePrism Mach.No.1464 Year of construction1995 With switchgearcheck Floorspace1,50x0,60 m Total height1,65 m Extra SpecificationsWith input vibration feeder, : output trough double rolls on mobile table, With Chiller plate. Double screw extrudersPrism EngineeringExtruders > Double screw extrudersBrand > P ...

General SKU359W974 LocationBarneveld CEcheck MakeLeistritz Sizes Screw diameter18 mm Main Features Motor4.7 KW L/D40 Specified Features - Double screw extruder MaterialStainless steel 1.4571 (316Ti) Double screw extrudercheck Screw diameter18 L/D40 Co-rotatingcheck Number of heating zones:8 Electric heating1,0kW (8x) Water coolingcheck AC-motor4,7 kW, 400/230 volt With variable speed drivecheck frequency converter Screw speed30-600 rpm Feeding with metering screwcheck Exchangeable segmentscheck Number of temperature controllers:7 Information TypeZSE 18PH-40D GMP-Design Mach.No.03396 Year of construction2005 With switchgearcheck Floorspace2,29 x 0,70 m Total height1,27 m Extra Specifications- This extruder has been used for testing carrier material. No API was produced/ used in this extruder The scope consists of: check Leistritz ZSE 18 PH-40D in GMP desig ...

General SKU411T126 LocationBarneveld CEcheck MakeClextral Framatome Main Features Motor52 KW Inlet diameter80 mm L/D36 Specified Features - Double screw extruder Double screw extrudercheck Number of hours146.30 Screw diameter32 mm L/D36 Counter rotatingcheck Number of heating zones:8 Steam heatingcheck AC-motor45/52kW, 380-420/440-480/660 Volt, 1480/1780 rpm Feeding with metering screwcheck clextral C0 Number of temperature controllers:8 MaterialStainless steel 1.4306 (304L) Information TypeEV 32 Mach.No.B 101 Year of construction2000 With switchgearcheck(as is) Floorspace4,3x1,42 m Total height3.26 Weight3460 kg Extra Specificationsmachine comes with k-tron Feeder specifications: Type LWF D5/ Type K2-ML-T35/DR Dia: 400mm feeder inlet Outlet: 110mm Double screw extrudersClextralExtruders > Double screw extrudersBrand > Clextral What you can expect from Foeth ...

General SKU357X1337 LocationBarneveld MakeBuss Main Features Motor21.5 KW Inlet diameter50 mm L/D15 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.46mm L/D15 With heating zones3 DC-motor0,710-21,5 kW, 380 volt, 50-1520 rpm Screw speed300 rpm InletDia. 50 mm Feeding with hoppercheck Max. temperature250 MaterialStainless steel Information TypeMDK 46B Mach.No.87/652482 Year of construction1987 Mounted on framecheck Floorspace2,70x0,55 m Total height1,90 m Weight1000 kg Extra SpecificationsWith 2-roll cylinder, roll diameter 150mm, roll length 400mm, 0:55 kW, 220/380 volt, 1400 rpm, roll speed 3,6-18 rpmMixing extrudersBussExtruders > Mixing extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are wel ...

General SKU379X947 MakeFeddem TypeFED 026 MTS Mach.No.201706041 Year of construction2017 Sizes Screw diameter26 mm Main Features Motor34 KW Inlet diameter42 mm L/D32 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter26 L/D32/42 Co-rotatingcheck With vacuum pumpcheck Number of heating zones:10 Water coolingcheck AC-motor34 kW, (400 V, 1890 rpm) Screw speed1200 rpm Feeding with metering screwcheck MaterialStainless steel Information LocationBarneveld With switchgearcheck Without switchgear (as is) Sizes switchgear1,8 x 0,60 x 2,20 m Floorspace3,10 x 0,881 m Total height2,072 m Weight2200 kg CEcheckDouble screw extrudersFeddemExtruders > Double screw extrudersBrand > Feddem What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwi ...

General SKU379X944 MakeCollin LocationBarneveld Type20x20 D Main Features Motor4.5 KW Inlet diameter30 mm L/D20 Specified Features - Single screw extruder Single screw extrudercheck Working hours:1324 Screw diameter20 L/D20 Number of heating zones:4 Electric heatingcheck AC-motor4,5 kW, 3x 380/220 V Inlet30 x 20 mm Feeding with hoppercheck Number of temperature controllers:4 MaterialStainless steel Information No.32000892 Year of construction1992 With switchgearcheck Floorspace1,60x0,60 m Total height0,80 m Extra SpecificationsWith Collin granulator, 0-1400 rpm, 220/380 volt :Single screw extrudersCollinExtruders > Single screw extrudersBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU252X211 MakeBuss TypeTCS30-17D No.452770 Year of construction1999 Mounted on framecheck Main Features Motor5.5 KW Inlet diameter40 mm L/D20 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter30 mm L/D20 Number of heating zones:2 Electric heatingcheck DC-motor5,5 kW, 380 volt, 1445 rpm With variable speed drivecheck Inlet40x30 mm Feeding with hoppercheck Feeding with metering screwcheck Number of temperature controllers:2 Materialcarbon steel ST52 1.0570 Information LocationBarneveld With switchgearcheck Sizes switchgear350x250x230 mm Floorspace1,50x0,65 m Total height1,85 m CEcheckSingle screw extrudersBussExtruders > Single screw extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You a ...

General SKU219X100 LocationBarneveld MakeXplore Sizes Screw diameter10 mm Main Features Motor0.55 KW Inlet diameter5 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter5-10 mm L/D10 Number of heating zones:6 Electric heatingcheck Air coolingcheck Water coolingcheck DC-motor550 watt, 208-240 volt Screw speed1-400 rpm Capacity5 ml MaterialChromed steel Information TypeMicro 5 Mach.No.5-03-12 Year of constructionUnknown With switchgearcheck Floorspace0,70x0,40 m Total height0,85 m Weight220 kg Extra SpecificationsScrew length 107 mm, volume 5,5 ml., (5 ml.), max barrel temperature 450°C, RKC SR mini touchscreen system, max vertical force 5 kN, pressure 200 barDouble screw extruders-Extruders > Double screw extrudersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compa ...

General SKU359W977 LocationBarneveld CEcheck MakeLeistritz Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm MaterialStainless steel 2.4819 (Hastelloy C-276) Information TypeZSE 27 HP-PH-40D Mach.No.3659 Year of construction2007 With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg Extra Specificationsthis unit comes with: - control cabinet. - 3x temperature control units. - extruder barrel lift Double screw extrudersLeistritzExtruders > Double screw extrudersBrand > Leistritz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

General SKU435U1404 LocationBarneveld MakeKrupp werner & pfleiderer Sizes Screw diameter25 mm Main Features Motor21 KW Inlet diameter80 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Number of hours32473 Screw diameter25 mm L/D20 Co-rotatingcheck Number of heating zones:7 Water coolingcheck Screw speed200-1200 rpm Feeding with hoppercheck Feeding with metering screwcheck brabander. 0,37kW, 119rpm, screw dia 35mm Capacity100 kg/h MaterialNitriding steel 1.8519 Information TypeZSK 25 P8 2E WLE Mach.No.20474223 Year of construction2000 With switchgearcheck (as is) Floorspace2,1 x 0,8 m Total height1,6 m Weight1100 kgDouble screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready ...

General SKU354T1381 MakeHosokawa Bepex GmbH LocationBarneveld TypeBX 200 T Main Features Motor3 KW Inlet diameter120 mm Specified Features - Mixing extruder Granulatorcheck Rotor granulatorcheck Rotor sizesDia: 200x50 mm Ring diecheck Die sizesDia: 200x55 mm Number of dies available:2 Die perforationDia: 2mm (4x), Dia 1,5mm(2x), 1,2x6mm Motor3kW, 220-240/280-420Volt, 1430 rpm With pre-mixercheck With motor1,5 kW, 220-240/380-420 Volt, 1400rpm InletDia: 120 mm (2x) Mixing extruders MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Information No.18227-01 Year of construction2009 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck(as is) Floorspace1,3x1,05 m Total height1,75 m Weight680 kgMixing extrudersHosokawa BepexExtruders > Mixing extrudersBrand > Hosokawa Bepex What you can expect from Foeth: -- Machine ...

General SKU269X293 MakeCollin TypeTeach-line E20T and BL50T No.9120 3914 Year of construction2014 LocationBarneveld Main Features Motor9 KW Inlet diameter30 mm L/D25 Specified Features - Single screw extruder MaterialStainless steel Single screw extrudercheck Screw diameter20 L/D25 Number of heating zones:2 Electric heatingcheck Air coolingcheck DC-motor1,1 kW, 400 volt, 1400 rpm Feeding with hoppercheck Max. temperature300°C Information With switchgearcheck Floorspace0,85x0,65 m Total height0,70 m Weight100 kg CEcheck Extra SpecificationsWith Teach-line film blowing line, type BL50T, dia. Take off rolls, 50 mm, roll width 200 mm, max bubble dia. 110 mm, speed 13 m/min, : winder dia. 52 mm, max pulling force 95N, max coil dia. 300 mm : Single screw extrudersCollinExtruders > Single screw extrudersBrand > Collin What you can expect from Foeth: -- Machine is ...

CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing for ...

PREALPINA 160 mm EXTRUSION LINE, For PP PS PE ABS PC, etc. Storage silo with agitators Extraction auger Forced feeding unit with adjustable speed and control panel Extruder with barrel 160 mm. screw, 35 L/D 160 mm screw, reconditioned Vacuum pump degassing unit, d.c. engine 330 kW, 215 kw used in work (POSSIBLE REPLACEMENT WITH A.C.DRIVE) Hydraulic screen changer for 300 mm.diam.screens Hydraulic power station Die face pelletizer Drying centrifuge NEW electric cabinet This line is offered FULLY RECONDITIONED

General SKUR1061 MakeKrupp Werner & Pfleider TypeZSK 50 P8.15E Mach.No.20474395 Year of construction2000 Sizes Screw diameter45 mm Main Features Motor51 KW Inlet diameter50 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter45 mm L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck DC-motorcheck Feeding with hopper(3x) Feeding with metering screwcheck MaterialStainless steel 1.2379 (X153 CrMoV12) Information LocationBarneveld With switchgear(2x) Sizes switchgear0,9x0,6x2,1 M (1x) 1,6x0,6x2,1 M (1x) Floorspace4,7 x 1,1 m Total height1,5 m Weight4000 Kg Extra SpecificationsWith twin screw side entry Werner &: Pfleiderer ZS-B 58 with 3 x K-tron dosing screws including funnels including 2x vibrating chute and including Bredel hose pump SP / 32 Double screw extrudersW&PExtruders > D ...

General SKU292M349 MakeBerstorff TypeZE-25 Mach.No.EO 0324/88 Year of construction1989 Main Features Motor6 KW Inlet diameter25 mm L/D20 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameterdia. 25x500mm L/D20 Number of heating zones:3 Electric heatingcheck Water coolingcheck DC-motor6 KW, 200 Volt Screw speed0-450 Rpm Feeding with hoppercheck Feeding with metering screwcheck Information LocationBarneveld With switchgear( as is ) Sizes switchgear0,8x1,0x2,0 M Floorspace1,8x0,8 M Total height1,1 M Weight450 KG Extra Specifications incl. tempereer eenheid 3,5 KW, 380 Volt. THERE ARE NO SCREWS WITH THIS MACHINE !Double screw extrudersBerstorffExtruders > Double screw extrudersBrand > Berstorff What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destina ...

General SKU300P748 LocationBarneveld CEcheck Main Features Motor3 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours567 Screw diameter50mm L/D20 Co-rotatingcheck Number of heating zones:1 Steam heatingcheck Water coolingcheck AC-motor3,0 KW, 230/400 Volt With variable speed drivecheck Number of temperature controllers:1 Used onicecream MaterialStainless steel Information MakeAPV Baker Industrial Extruder Division Ltd (UK) Mach.No.WEF960037 724/1 Year of construction1996 With switchgearcheck Floorspace2,6x1,2 M Total height1,6 M Weight1100 KG Technical specs Extra informationscrews form stainless steelDouble screw extrudersAPV ProductsExtruders > Double screw extrudersBrand > APV Products What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- ...

General SKU304P676 MakeAPV Chemical Machinery Ltd TypePGX 30 Mach.No.800471 Year of construction1989 Main Features Motor4 KW Inlet diameter30 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Number of hours19187 Screw diameter30mm L/D10 Co-rotatingcheck Water coolingcheck AC-motor4,0 KW With variable speed drivecheck Screw speed(161rpm) Feeding with hopperdia.340mm x400mm Feeding with metering screwK-Tron T-22 twinscrew, Motor feeder 0,55 KW, Motor agitator 0,18 KW Number of temperature controllers:1 Capacity30 KG/Hr MaterialStainless steel 1.2379 (X153 CrMoV12), Stainless steel Information LocationBarneveld With switchgearcheck Floorspace1,8x0,8 M Total height2,2 M Extra Specificationswith extrudermold dia.1mm Double screw extrudersAPV ProductsExtruders > Double screw extrudersBrand > APV Products What you can expect from Foet ...