extruder ide used for sale

General SKU231U195 MakeWerner & Pfleiderer TypeZSK 50 MCC Mach.No.64012350 Year of construction2000 Sizes Screw diameter40 mm Main Features Motor181 KW Inlet diameter165 mm L/D54 Specified Features - Double screw extruder Double screw extrudercheck Number of hours34432 Screw diameter50 mm L/D54 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck DC-motor0,79-181 kW 470 Volt Screw speed4-920-1056 rpm Feeding with hoppercheck (165x130 mm) Feeding with metering screwcheck (Werner&Pfileiderer, type: ZS-B 58, motor: 5-6 kW, 400 Volt, max. 400 rpm) Exchangeable segmentscheck Number of temperature controllers:10 Capacity200-400 kg/h MaterialFerritic stainless steel 1.4113, Mild steel, Nitriding Steel 1.8550 Information LocationBarneveld With switchgearcheck Floorspace2,1x0,2 m Total height0,73 m Weight± 7340 kg CEcheck Extra ...

General SKU269X297 MakeKillion TypeKL-075 No.19707 Year of construction1995 Mounted on frameOn wheels Main Features Motor1.1 KW Inlet diameter35 mm L/D26 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter19,1 L/D26 Number of heating zones:3 Electric heating18,4 KVA, 380 volt, DC-motor1,1 kW, 380 volt Screw speed12-120 rpm InletDia. 35 mm Feeding with hoppercheck Number of temperature controllers:3 MaterialStainless steel With jacketcheck General LocationBarneveld With switchgearcheck Floorspace1,10x0,90 m Total height1,50 m Weight300 kg CEcheck Extra Specificationsextruder comes with:Thermo Prism TSE systemsnr: 5265.year: 2002Single screw extrudersKillionExtruders > Single screw extrudersBrand > Killion What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shi ...

General SKU299X419 LocationBarneveld MakeCoperion Werner &: Pfleiderer GmbH Stuttgart Sizes Screw diameter120 mm Main Features Motor310 KW Inlet diameter200 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter120 mm L/D15 Co-rotatingcheck Electric heating4 Water coolingcheck DC-motor310kW, 440V, 1780rpm With variable speed drivecheck Screw speed365rpm Feeding with hoppercheck Feeding with metering screwSide feeder MaterialNitriding Steel 1.8550 With jacketcheck General TypeKP-120/250 KombiPlast Compounder Mach.No.20493087 Year of construction2004 With switchgear(as is) Weight± 22.000 kg Extra SpecificationsComplete line with side-feeder, discharge screw and partially control cabinetinfo compounder:Krupp Werner &:amp: Pfleidere GmbHtyp: D315 EXTSingle screwscrew dia: 250 mmscrew lengte:1500 mm.screw van be heatedL/D: ...

PZG60b56 extruder with МDVG920b twin-shaft mixer

screw ø:: 60 mm screw length:: 15D screw speedl:: -- U/min Condition: used Specification: rubber extruder – used - Screw diameter: 60 mm - Screw length approx.: 15D - Sold as seen. The buyer is responsible for safety regulations. No CE marking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 60 mm screw length:: 11D screw speedl:: -- U/min drive power:: 18,5 kW Condition: used, reconditioned Specification: rubber extruder – used - Screw diameter: 60 mm - Screw length approx.: 11D - New screw - Cylinder refurbishment - Feed roller refurbishment - New safety cage - New rotary joint for water - New AC motor: 18.5 kW - New control cabinet with Siemens S7-1200 PLC system - New control panel with Siemens KTP700 Basic touch panel - New Siemens G120 frequency converter for variable speed - Remote maintenance device - New cabling - Pressure sensors on the extruder head - Safety device - CE marking and an operating and maintenance manual in English Refurbished in accordance with CE standard safety regulations Warranty: 1 year Option: TCU for temperature control of the water up to 95°C, for placement near the extruder The data for this ad  ...

screw ø:: 70 mm screw length:: 22D screw speedl:: -- U/min Condition: used Specification: rubber extruder line – used COLMEC Extruder, Hot Air Channel, Cooling Bath Consisting of: Extruder COLMEC 70 x 22D - Screw diameter: 70 mm - Screw length approx.: 22D - Extruder motor power: 37 kW - Cooling unit for extruder Hot air oven: - Hot air oven power: 80 kW - Fan power: 2x 0.36 kW, 2x 1.5 kW - Stainless steel cooling bath The system is in good condition and was still in operation until approx. 6 months ago - Sold as seen. The buyer is responsible for safety regulations. Without CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sale of spare parts of EEK 125.22 V, including vacuum cylinder, screw and V-pump, 6 x TCU, Power cabinet with FU 165 KW

A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement.

BANDERA TWIN SCREW PVC PIPES EXTRUDER, for pipes with min/max diam.40/200 mm., extruder with n.2 parallel counter-rotating screws Ø 90 mm, Throghput rate 400 kg/hr, missing of screenchamger (can be added separately), n.2 dies available 40 to 125 mm + 125 to 200 mm., Tooling from 40-200 mm (available diam. 100 mm for O-Ring), Bandera 6 mt.long vacuum calibration tank, IPM haul off unit, IPM saw, IPM belling unit, constructed in 1998, totally refurbished in 2006 by Plasco, machine now disconnected, offered RECONDITIONED., availability: immediate, working width: 40-200 mm Ø, capacity: 400 kg/h, conditions: disconnected, type: pipes extrusion line

Extruder for the production of packaging chips Year of manufacture: 1994 Screw: four-course Cylinder: 2-pass Nozzle plate "FLIPS/balls diameter 4mm/1-fold Cutting device with 4-blade cutter head Dosing and suction device Machine is electrically connected, dry running possible Spare parts: 2 4-pass screws, 1 nozzle plate

This ROLBATCH RBSDMS-IZS-678 was made in 2016. It is equipped with a Mill PLC control unit. The machine has a maximum film thickness of 0.3-1 mm.

This KUHNE KS45-24D compounding extruder was manufactured in 2006. Ideal for processing a variety of materials, it offers robust construction and reliable performance. Consider the opportunity to buy this KUHNE KS45-24D compounding extruder. Contact us for more information.

This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information.

This LEISTRITZ ZSE60MAXX-48D was manufactured in 2012. A co-rotating twin-screw extruder, its designed for high-performance compounding of advanced polymer materials, including biodegradable polymers. Adaptable to various extrusion processes, its ideal for bioplastics, masterbatch production, or specialty compounding. Contact us for more information about this machine.

General SKULX013 LocationBarneveld MakeClextral Specified Features - Double screw extruder Double screw extrudercheck L/D36 Number of heating zones:8 Electric heatingcheck (8 × 1.8 kW = 14.4 kW total) Water coolingcheck (2 m³/h, 4–6 bar, 11 kW) AC-motorcheck (14 kW, 2000 rpm) Screw speed1200 rpm (max) Number of temperature controllers:8 (for each heating zone) Information TypeEV 29/32 High Torque Mach.No.TD 4 004 427-0020 EN Year of construction2002 With switchgearcheck Weight2000 kg Extra SpecificationsLubricating unit Power: 0.3 kW Water flow: 0.13 m³/h Thermic power: 0.75 kW  : Hydraulic unit for barrel drive Power: 0.37 kW Oil capacity (ISO HV 46): 5 L Setting pressure: 187 bar  : Barrel cooling (extra details) Type: Electrovalve Number of cooling areas: 9  : Water pump Manufacturer: Clextral – DKM Type: SPK PP12 Flow: 19 L/h Maximum pressure ...

Manufacturer: Kowin Model: 232 Machine 1 : - Operating hours 0 - Year of Manufacture: 2024 Machine 2 : - Operating hours the machine donsen´t show operating hours . The machine was only doing g 10-15t of regrind per month from 2011 till 2024 - Year of Manufacture: 2011 Find more here - / Contact us at -

PLASTIMAC LAB EXTRUDER, for blown film, suitable for testing granulate, 25 mm screw diameter, 70 mm diam. die, 500 mm collection frame, 7,5 Hp drive, complete wuth supporting structure, (corona treatment+small printer can be sold separately if required), installed power - used power in work: about 60-65% : 7,5 Hp, working width: 500 mm, conditions: good

BLOWN FILM LAB EXTRUDER, suitable for testing granulate, 25 mm screw Ø 25 L/D, 60 mm diam. die, 500 mm. pull off, 350 mm collection frame, 7,5 kW drive, complete with tower, nips and rolls, control panel, production rate 10 kg/h, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked

Key data: 20 mm, 150 , 2150 U/min

with PE screw, Capacity approx. 350 kg/h complete with motor, gearbox and Heating tapes Good condition, immediately available

A Lenhard extruder for butyl rubber is available. Application: insulating glass production, material: thermoplastic butyl based on polyisobutylene, max. operating temperature: 140°C, max. butyl pressure: 140bar, max. hydraulic pressure: 150bar. An on-site inspection is possible.

Haendle Extruder type PZG60b/50 with doubleshaft mixer MDVG920a, 29 cbm/h, 30 bar

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, for PE PP ABS PC PS, compounds, masterbatches, Average throughput rate 600 kg/h depending on material and feeding rate, spare : 2 screws and 1 barrel reconditioned to 100% performances, Mounted: screws + barrel in very good conditions, n.1 dosing unit with hopper, N.2 vacuum degassing points, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, on separate request), hydraulic pack, fitted with strand die (available with water ring pelletizer on request) + stainless steel cooling bath with heat exchanging unit + air-blowing dryer, electric cabinet (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The line is offered totally or partiall ...

General SKU243Y170 MakeBühler Serial3068043442 TypeBTSK 30/40D Sizes Screw diameter30 mm Main Features Motor21.2 KW Inlet diameter50 mm L/D53 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter30 mm L/D53 Co-rotatingcheck Number of heating zones:11 Water coolingcheck AC-motor21 kW 360 V Screw speed25—800 rpm Feeding with hoppercheck With jacketcheck General Year of construction1998 LocationBarneveld With switchgearcheck Sizes switchgear2,40 x 0,50 x 2,00 m Floorspace2,38 x 0,60 m Total height1,45 m Weight700 kgDouble screw extrudersBühlerExtruders > Double screw extrudersBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

KAUTEX KCC30 Extrusion Blow Molding Machine Year: 2012 Operating hours: 33,000 h 1 station Clamping force: 300 KN Screw diameter: 90 mm 4 kg accumulation head (HDPE)Platen Dimensions : 530 x 700 mm Distance between plates 1000 mm Maximum mold dimensions: 870 x 650 x 765 mm Control system Blow command Head type: Vertical head with hydraulic accumulator Maximum container volume: 30 liters Die diameters: 90, 150, 170, 190 or 220 mm Maximum pressure: 220 bar Air consumption: 95 m3/h Pressure air: 6 - 10 bars Installed power: 20 KW Number of temperature zones: 5

Rod line consisting of: Feeding system with agitated hopper Werner & Pfleiderer extruder ZSK model Ø53x33D twin-screw Manual filter changer, CFM75 model 10-strand + 6-strand rod granulation head TI400/4 4 M immersion tank Periplast dryer Granulator Screening

Clextral extruder, Type: Evolum EV032 M, Extruder: 40D, Barrel length: 10 x 128 mm, Stroke length: 1420 mm, Water: 4.5 - 5.5 Bar, Compressed air: 6 Bar, Steam injection: 2 - 6 Bar, Power: 3 x 400V, 50Hz, 83kW, Dimensions: 4475 x 1200 x 2100 mm, Weight: 1905 kg, Only 80 working hours!, Clextral water pump, Type: CLX DKM, Flow: 6 - 42 l/h, Pressure: max 10 Bar, Reservoir: 7.5 litre, Power: 0.55 kW, Dimensions: 1265 x 350 x 700 mm, Clextral / Prominent oil pump, Type: GMXA1604, Flow: 0.3 - 2.5 l/h, Pressure: max 10 Bar, Reservoir: 10 litre, Dimensions: 900 x 700 x 1150 mm, Clextral High Moisture Extrusion Cooking die, HMEC type: 2 x 800 mm length, Material: CLX202, Internal section: 60 x 8 mm, Dimensions: 1900 x 700 x 1200 mm, TLV steam kit, Type: 2/10 TLV, Serial number: SV148, Steam flow: 2 - 10 kg/h, Steam pressure: 6 - 10 Bar, Maximum pressure: 10 Bar, Steam inlet: DN15, PN16, Steam out ...

PowerHeater PH100-1, Capacity: 150 - 240 kg/h, Steam: 50 - 100 kg/h, 10 Bar, Compressed air: 6 - 8 Bar, 50 Nl/min, Water: 16 Bar, 1500 l/h, Power: 3 x 400V, 50Hz, 1.5kW, Dimensions: 3000 x 1400 x 1800 xmm, Weight: 850 kg, Klovborg slab-outlet conveyor, Serial number: 220188-2, Power: 230VAC, 50Hz, 1Ph, Dimensions: 1250 x 500 x 1450 mm, Weight: 65 kg, Source Technology screw trolley (2 pc.), Serial number: 65800-41-110562 / 66400-33-110562, Working load: 250 kg, Dimensions: 1500 x 1400 x 1950 mm, Weight: 100 kg, With Kito CX003 manual hoist

A complete Battenfeld compact extrusion line for the production of PVC profiles is available. 1) Twin-screw extruder Battenfeld MBEX 2-50-16 V, year of manufacture: 2006, output capacity: 15kg-60kg/h, screw diameter: 52mm, screw length: 16×D, barrel zones: 4, barrel cooling zones: 3, adapter zones: 1, die heating zones: 9, control system: BMCtouch. Including dry vacuum pump, pressure measuring points, clamping flange, water-air separator, blow-off device, mounting elements and hopper cover. 2) Calibration table Battenfeld KP 125 V 2/4m, mounting frame length: 4100mm, mounting rail width: 320mm, longitudinal adjustment: 500mm, transverse adjustment: +/-15mm. 3) Speck vacuum system, pumps: 2, motor power: 2×4kW, operating pressure: 200mbar, max. air capacity: 2×140m³/h. 4) Battenfeld RP 125 SE caterpillar haul-off, passage height: 100mm, contact length: 1100mm, pad width: 160mm, haul-o ...

Screw diameter: 114mm, max. PVC throughput: 600 kg/h, max. screw speed: 20/min, number of heating zones for molds: 12, motor power: 76 kW, rated voltage: 3x 415V AC, rated current: 353A, rated power: 218kW, weight: 7.1t, operating hours: approx. 90,000h. Screws: Geometry designed for PVC profiles, water-cooled, cylinders: nitrided, air-cooled, equipped with a new PLC control system, vacuum pump, and power inverter for the main motor. An on-site inspection is possible.

Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details.

This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information.

TECOM BLOWN FILM EXTRUDER, for LDPE-RLDPE blends, Contrex feeding, 2 gravimetric components + 1 volumetric dosing units, Screw diam.70 mm 30 L/D, Rotating head, Low neck, 1.600 mm pull off unit, gusseting unit, Cason corona treatment, single color printer (for marks), 1.600 mm double collection frame, BRA 36+ Eurochiller, working width: 1600, availability: February 2026

Technical details Type: Stainless steel boilie extruder / paste extruder Application: - Fishing boilie production - Animal feed paste processing - Feed and mixture extrusion Tub capacity: 50 L Power supply: 220 V Screw speed: Variable, 0–80 rpm Configuration: - Integrated paste mixer - Mixing paddles for paste/hull processing - Variable speed screw drive - Start/stop controls - Emergency stop button - Reverse function Construction: Full stainless steel construction Features: - Easy to clean - Easy maintenance access Condition: Functional, ready to work Auction-ID: A7-48425-8