extruder for pp used for sale

General SKU041H136 LocationBarneveld MakeHändle TypeEDR 21-A No.PZ-3444 Year of construction2000 Main Features Motor22 KW Length1400 mm Inlet diameter210 mm Specified Features - Double screw extruder MaterialStainless steel Double screw extruders Screw press(1x) Double screwcheck Screw diameter210mm Screw length1400mm Shaft diameter100mm Pitch250/140mm Motor22,0 KW, 400/690 Volt Speed± 43 Rpm Inletdia. 245mm With jacket(max. 6 bar) Information Floorspace3,6x0,9 M Total height1,3 M Weight2950 KG Extra Specifications- Max. pressure 20 bar Double screw extrudersHaendleExtruders > Double screw extrudersBrand > Haendle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in ...

General SKU288P487 LocationBarneveld MakeWerner & Pfleiderer GmbH (DE) TypeZSK 70 F175E Year of construction1990 Main Features Motor80 KW Inlet diameter70.5 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter70,5mm L/D15,3 Co-rotatingcheck Ventedcheck Number of heating zones:3 Electric heating7+7+5 KW Water coolingcheck DC-motor80 KW, Screw speed300 rpm Used onpowdercoating MaterialMild steel Information Mach.No.230 196 With switchgearcheck Floorspace4,0x0,9 M Weight5700 KG Extra SpecificationsIncluding GWK Watercooler, : Double screw extrudersW&PExtruders > Double screw extrudersBrand > W&P What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands.  ...

General SKUR1123 LocationBarneveld MakeWLS Gabler Maschinenbau KG (D) TypeDE 100/100 No.12482 Year of construction1992 Main Features Motor18.5 KW Inlet diameter100 mm L/D9 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter100mm L/D9.4 Co-rotatingcheck Number of heating zones:2 AC-motor18,5 kW 380/660 Volt Feeding with hoppercheck MaterialStainless steel Information With switchgear( as is ) Total height1,7 M Weight2150 Kg Floorspace2,5x1,3 M Extra SpecificationsIncluding 1 piece Single Temperiertechnik heating units STW 150 / 1-9-20-K1S 9 kW 400 Volt including 2 spare screws Double screw extrudersWLS GablerExtruders > Double screw extrudersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

Complete extrusion line with support for sale, dispense, extrude, granulate and SAG Extruder: Feddem FED 72 MTS, 2000., 2012 general overhaul. 600-1000 kg / h with PBT, PA6, PA66, GF and impact resistant modified products. Thyssen TGE 3-72-DOS-4 transmission, 314 kW Compexmotor, 4 degassing zone with 3 vacuum degassing, 3 body parts open side feeder, Dosage: Dosage: 6 Brabender dosing scales with control, multiple pellets/Flake car, 2 powder scales, a fiberglass scales, Transitube support for glass fibers Side feeder: Feddem/Flender Vacuum pump: A439697 Integrated Granulation: IPS SG120/7.5, 2000, 9 kW Complete solid steel frame for the feeders and water bath brushes, bagging Tower for granules with S + S all metal separator, Transitube glass fiber/material high to promote

A110 Twin-screw side feeder (ZS-B) The ZS-B allows fillers and additives or chopped glass fibres to be fed in from the side in powder and/or pellet form. The co-rotating screw shafts are largely self-wiping and pro-mote active conveying. The feeder can be attached to the twin-screw extruder in conjunc- tion with a connection housing at any point in the processing section where feeding of the above-mentioned materials makes sense. The ZS-B can be quickly installed or removed using quick-change devices on the screw barrel. The ZS-B is designed with a wheeled base frame; a flat and smooth installation surface is required for this. Sufficient spacemust also be provided for installation and removal, as well as for cleaning. The twin-screw side feeder consists of the following component parts: ● screw barrel ● 2 screw shafts with positive engagement ● frequency-controlled motor  ...

Extruder liner and screw from 25 to 140 Ø Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Key data: 2 U/min, 25

Stock - No. 1665 1 Gebr. ERMAFA compounding line type E 90.2 - throughput up to 450 kg/h depending on material Built in 1987 consisting of: Extruder Twin Screw Ø 2 x 90 mm - 25 L/D Synchronous Segment screws and barrels, water-cooled Drive 75 kW DC , 1450 rpm. 2 x degassing zones, 1x vacuum pump Hydraulic screen changer screen - Ø 150 mm >> WITHOUT control / control cabinet, electrical diagrams for new control are provided by us ! SPECIAL PRICE Further extruders and compounding lines from the Wuppertal warehouse - ready for demonstration.

Used extruder CANOL, type: RON 1/380 -in good condition- - 380 mm roller width - Condition: Very good, ready for immediate use Viewing and test run are possible by arrangement.

General SKU411U1293 LocationBarneveld MakeGea TypeConsiGma 1 Mach.No.10CG001002 Sizes Screw diameter22 mm Main Features Motor9 KW Inlet diameter40 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter25 mm L/D20 Co-rotatingcheck Number of heating zones:1 Oil heatingcheck Feeding with hoppercheck 6 Ltr. Feeding with metering screwcheck Exchangeable segmentscheck Number of temperature controllers:1 Capacity25 kg/uur Double screw extruders Outlet50 mm MaterialStainless steel 1.4404 (316L) Information Year of construction2011 Mounted on wheelscheck CEcheck With switchgearcheck Floorspace1,80 x 1,10 m Total height1,72 m ATEX compatiblecheck Extra SpecificationsWith Brabender feeder, type DDW-MD3-DDSR20-5Q HYD,Twin screw granulator,one dryer segment,touchscreen control - Powder dosing max. 25 kg/hour- Liquid injection  ...

Key data: 90 mm, 16

available Triplex Extruder- Cold Feed with head and feeder. Description attached!

Description: Recycling Line - Extruder Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Recycling Line - Extruder Approx. Onsite Dimension. (l x w x h): 17,000 x 3,700 x 2,800 mm, weight approx.: 1 kg

Description: Recycling Line - Extruder Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Recycling Line - Extruder Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Lobe Depositor and Extruder Comas DLV 450 Year of construction: 2008 Condition: very good Siemens control 450 mm working width Techincal details follow The DLV model cookie depositors are ideal for the production of wire cut and smooth mix deposited biscuits. The DLV is a flexible and versatile stand-alone machine that can also produce cakes.

Troester.200mm H/F strainer M/C Number 7175-71 L/D 6.5/1 Roller Feed 350mm. Hinged strainer head with hydraulic clamp. 125KW AC v/s motor. On single bedplate. With controls.

Extrusion press with 400 mm Ø, 55 kW drive, hard cast screw and pre press PZSVG 40 (built 1996, 15 drive), on 4 hydraulical posts. Complete, incl. 1 set spare parts (replacement screw and windlass).

1 x Buss PR200? Ko-Kneader, supplied fully refurbished by Buss in 1995, G130 gearbox, 11 L/D ratio, with 340kW dc motor and controls. Including oil heater and TCU 2t/hr output. Spare screw and barrel segments.

We´re offereing successfully since many years twin-screw compounding extruders >> NEW segmented screws and cylinders, LD ratio due to your request Side-feeders, vacuum ports and accessories Please contact us for further information

According to the description below

Multiple extruders

Material: PE, PP, PS, ABS / Details: DC motor 220 kW, degassing, dcrunner, screw diameter 70 mm, LD: 32, Throughput: approx. 400 - 600 KG/hr.

Food Extruders single and twin screws for various applications : breakfast cereals, corn flake, pet food, full fat soya, snacks We overhaul many models and have in our stocks machines like Clextral BC 45/82, wenger 175 ... also walter single screw. Milin Gentieg cereals Britany, France processing equipments has been specialising for years. We organise deliveries to any destinations for single machines or complete lines from cleaning to flaking and extrusion

EDI Autoflex Extrusion Die width 900 mm.

Strainer Bandera 150mm with 75kW motor. This machine has been overhauled by Deguma and little used after that. More info as attachment.

Furnace 1200 temperature range 100 - 1200 Celsius inner dimensions 1x1x2m power 50kW PLC could be various size industrijskih peći INDUSTIJSKIH PECI NIKOTIRANJE CEMENTIRANJE TERMIČKA OBRADA ČELIKA KALJENJE INDUKCIONO PLAMENO ALATNIH I KONSTR. ČELIKA ŽARENJE MEKO NORMALIZACIONO STABILIZACIONO CNC obradni centri za struganje Završno precizno struganje Brušenje nakon termičke obrade, Zatvaranje tolerancija - lanci mjera, Kombinovani postupci struganja i glodanja, Dijelovi za automobilsku industriju i industriju mašina od čelika obojenih metalą CNC 3-osni obradni centri, Konvencionalno glodanje za pripremu i doradu, Kombinovano CNC struganje i glodanje, Zat varanje tolerancija - lanci mjera, PEĆI ZA TERMIČKU OBRADU ZAŠTITNE ATMOSFERE PEĆI ZA TERMIČKU OBRADU SA ZAŠTITBNOM ATMOSFEROM NITRIRANJE,CEMENTACIJA, POBOLJŠANJA, ŽARENJA, CARBONITRIRANJE NITROKARBURIRANJ ...

vertical design, for simultaneous extruding of 4 strands, Sausage masses, etc. each strand with a diameter of approx. 15 mm, Capacity approx. 15 l, Drive 1.5 kW

Number Of Screws: 155 mm // Screw Diameters: 155-120 600 kg/h

The line in good condition. The dowstream equipment made by company UNIPLAST. The line was produced PVC profiles for roller-shutter system.

we offer for sale an unused granulation unit for compounding lines.

Manufacturer Amut Model BA 92 Machine is like new, year 2020 Screw diameter : 92 mm

It is 2003 model and working hours have been revised for 4 years. New screw barrel

Double carriage blow molding machine still installed and working, with siemens s7 plc, temperature adjustment from plc and possibility to store recipes.

A fully equipped line for the production of nonwovens Spunbond Type YS 2400: Manufacturer: Faré (Italy) Useful width: 2400 mm Capacity: up to 514 kg/h Nonwovens weight: 10-100 g/m2

see PDF attached Condition very good

Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories.

Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control.

Was used for PVC, PUR and TPEV, with control cabinet, used screws and one used cylinder, with documentation, was maintained regularly.

Used dough weigher RHEON, type: KN-125 with belt scale and rotary table -Refurbished- - for single or double-filled products, such as coloured cookies, sweets or other pasta - all possible forms (see photo) - 100 recipes can be stored - in stainless steel and food sterile - with belt scale from OSC - optional double filling unit - Condition: very good, as new, completely overhauled - 6 months warranty Specifications: - Weight range: 10 - 90 g - Product length: no limit - Output: 1,200 - 6,000 pcs./h (depending on product) - Weight performance: max. 180 kg/h - Machine dimensions: 1,516 x 874 x 1,360 mm Visits and test runs are possible by arrangement.

Refer to code 1042 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1043 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1044 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1045 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1046 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Year of Build: 1993 Complete wardrobe DC Motor Platifying system in poor condition Complete heating system

Hopper – gravity charge Auger: 38CrMoA1A, nitrided – new Cylinder: 38CrMoAlA, nitrided, bimetallic, air-cooled – new ; Motor power: 160 kW A.C. controlled by inverter Screw diameter: Ø130mm; L/D=38:1; Maximum speed of screws: 140rpm Degassing system: vacuum pump : 3kw Double degassing Heating zones: air-cooled heaters Air cooling, cooling power: 0.37Kw×7; 7 cylinder heating zones + 5 additional zones per head Productivity: up to 450 kg/h