127,606 used machines on RESALE, but how to find them? Machine Search
Inv. Num. : 6445 Type: BF 74 Producer: CDM ROVELLA Generated: 2008 Parameters: Workpiece length: 800 mm Workpiece width: 550 mm travel length of the X-axis: 700 mm Travel length of the Y-axis: 400 mm Travel length of the Z-axis: 350 mm Maximum table load: 2000 kg Maximum electrode weight: 90 kg Tank dimensions: 1200 x 750 x 505 mm Weight: 4400 kg
Key data: 24 KW, 30 kVA, 230 V
This generator is manufactured in the EU according to all European standards 30 months warranty Stamford Alternator ComAp Control Module Power Generator Specifications: Model No.: EQ-I3024 Prime Rating: 30 kVA / 24 kW Standby Rating: 33 kVA / 26.4 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: S8000 AM1 Bore x Stroke (mm): 99 x 104 Displacement (L): 3.2 Compression ratio: 17:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight open: 945 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and ...
Key data: 16 KW, 20 kVA, 230 V
Made in the EU 30 months warranty Stamford Alternator ComAp Control Module Power Generator Specifications: Model No.: EQ-P2016 Prime Rating: 20 kVA / 16 kW Standby Rating: 22 kVA / 17.6 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine Make: Perkins Motor Model: 404A-22G1 Bore x Stroke (mm): 88 x 110 Displacement (L): 2,216 Compression Ratio: 23.3:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions of the unit: Length: 1600 mm Width: 650 mm Height: 1250 mm Weight open: 560 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-co ...
Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.
Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.
1,000kW 60Hz 61HR CAT 3508 Generator Set This CAT 3508 generator set was decommissioned in Feb 2023 and has been currently being stored. This generator set has been used as an emergency standby generator for a government office building in Korea. Since the operation time is very short at 61 hours and maintenance has been excellent, it is currently in the best condition and can be operated immediately. Main specifications: - Engine Model: CAT 3508 x 1 Set - Maker: CATERPILLER - Application: STANDBY - Output: 1,000kW x 1,800 rpm - Frequency & Voltage: 60Hz & 380V - Year of Production: 2004 - Running Hours: 61hrs - Fuel Oil: Diesel Oil
Key data: 80 KW, 100 kVA, 230 V
Made in the EU 30 months warranty On hand! Only 2 pieces available Power Generator Specifications: Model No.: EQ-I10080 Prime Rating: 100 kVA / 80 kW Standby Rating: 109 kVA / 87 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45TM2A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2430 mm Width: 1056 mm Height: 1700 mm Weight: 1422 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-coated, weld ...
Key data: 16 , 20 , 400
Hood unit 20 kVA PRP Power: 20 kVA / 16 kW PRP Operating mode: 1500 rpm Voltage: 400/230 V Power factor: 0.8 Stage 3A Engine: Deutz | F3M2011 Generator: Leroy Somer | TAL040 F Aggregate control: Automatic control panel WITHOUT Switching and WITHOUT mains control with Comap IL-NT AMF8 1 x 4-pole circuit breaker Leak detector Battery disconnect switch Battery charger Cooling water heating Voltage regulator Tank: 100 L / 21.3 hours at 75% load
Key data: 80 , 200 , 400
Hood unit 100 kVA PRP Power: 100 kVA / 80 kW PRP Operating mode: 1500 rpm Voltage: 400/230 V Power factor: 0.8 Stage 3A Engine: Deutz | BF4M1013EC Generator: Leroy Somer | TAL044 D Aggregate control: Automatic control panel WITHOUT Switching and WITHOUT mains control with Comap IL-NT AMF8 1 x 4-pole circuit breaker Leak detector Battery disconnect switch Battery charger Cooling water heating Voltage regulator Tank: 145 L / 9 hrs. at 75% load
NEW Perkins Diesel 45/50 kVA, Modell 1103A-33TG1, silenced Subject to changes, errors and prior sale
Diesel engine 2.19 litres 4 cylinders 35 KW at 3000 rpm E - Gas integrated in pump Weight 205 kg Complete engine Control unit wiring harness Manifold fan Data
Diesel particulate filter Deutz 04603903 F035D00908 1X04604124 11600013335527 GP3403702 20131106
Deutz TCD 6.1 L6 engine Miretti Ex conversion diesel trolley mining
Deutz TCD 6.1 L6 diesel engine with Miretti Ex conversion for a diesel cat mining etc. See pictures ! No mails are answered, what is the price! Ask for quotes, my phone number is on file! Won't give a price ! There are two engines available ! If you send me your email address, I can send you more photos !
brand new - with a capacity of 10,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - zinc yellow / RAL shade 1018 (see sample photo). (Other RA ...
Injection pump diesel pump JCB Stanadyne A3 DB4429-6101 Condition: as good as new (test run ex works) Manafacture: Stanadyne Part Number: A3 DB4429-6101 JCB number: 320/0674 On sale are 40 injection pumps from 2012 to 2020. The pumps were subjected to a test run at the factory. When we arrived at our premises, they were staked out, dismantled and stored.
brand new - with a capacity of 50,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10.70 m - D = 2.50 m - weight approx. 9.5 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - white / RAL-9016 shade (sample photo). (Other RAL co ...
Diesel generator / new and unused Make: Ford Model FDT10200SE Voltage: 230 V and 400 V Continuous power: 7.5 KvA Short-term maximum power: 7.9 KVA corresponds to 9.75 kW Pure Sine Wave: Yes Frequency: 50Hz Starting Method: Electric Volume: 72 dB ATS: No Fuel tank capacity: 14 litres Fuel: Diesel Weight in kg: 168 kg Runtime: 7 hours at 75% load Dimensions (LxWxH): 920 x 520 x 720
Farm petrol station - company petrol station - diesel petrol station composed of: 1 x 16 qbm steel tank - brand new 1 x Nozzle type K-80 - brand new Description of storage containers: 16,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 8.50 m - D = 1.60 m - weight approx. 3.5 tons. - ex works, fre ...
Diesel filling station - Home filling station - Gas station - Small filling station composed of: 1 x 20m³ storage container - brand new 1 x fuel dispenser type eco 75 - brand new Description steel tank: 20,000 litres capacity according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight app ...
3 x Mak 9M25 engines Available from stock 2850 Kw at 720 Rpm in good condition From our stock in Turkey
Key data: 60 KW, 75 kVA, 400 V
ON HAND 30 months warranty WEG Alternator DEIF Module Generator Set Specifications: Model No.: EQ-H7560 Emergency power output: 75 kVA / 60 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine manufacturer: Hyundai Engine Model: SP344CC Charging: Turbocharging & Intercooler Fuel System: Series Injection Regulator Type: Mechanical Generator set dimensions (closed): Length: 2430 mm Width: 1056 mm Height: 1700 mm Weight open: 1140 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine WEG Generator ABB Circuit Breakers Protection system in manual operation Flexible oil hoses and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically painted, welded steel chassis Fuel tank integrated into the chassis Industrial Silencer Electronic Battery Charger Elect ...
Type: Die-sinking EDM machine Number: 21958 Category: Die-sinking EDM machines / EDM Manafacture: Makino Model: EDAF 3 Year of construction: 2016 Travel: 450 x 350 x 350 mm [ X x Y x Z ] Table size X: 700 mm Table size Y: 500 mm max. workpiece size X: 850 mm max. workpiece size Y: 650 mm max. workpiece size Z: 400 mm max. workpiece weight: 800 kg C-axis Linear scales (X,Y,Z) Control Hyper i Super Spark iV Super Surface Super Edge (incl. MF 4) Super Surface Graphite EROWA Robot Interface (A-Type)
; Power [PS]: 65; Engine: Iveco FPT F34TE1PV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, CEE 32A 400V 5P, CEE 16A 230V 3P; Water Tank Volume [l]: 140
; Power [PS]: 538; Engine: Scania DC13 320A 02-63; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 370
We have a revised 3412 integral motor unit available to be used as a generator or converted into a motorcycle pump. Manufacturer: CATERPILLAR Model: 3412 Arrangement: 2385363 Serial Number: 41202591 Power: 682 KW Type: Stationary Diesel Manufacture: 2004 Rated rotation: 1,800 RPM
; Power [PS]: 359; Gross weight [kg]: 4600; Engine: Volvo TAD1380GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320
; Power [PS]: 419; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320
; Power [PS]: 479; Gross weight [kg]: 3900; Engine: Volvo TAD1382GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320
; Power [PS]: 239; Engine: Volvo TAD881GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 280
used
Ref. -No.: 10280 Manufacturer: GUCBAR Year of construction: 2021 Art: Diesel model: GJB9500-E3 Dimensions (L x W x H): 720x560x585 Weight: 98 rated capacity: 8.0 Maximum power: 7.5 phase: 3 engine: SC192FB
; Power [PS]: 299; Gross weight [kg]: 4450; Engine: Volvo TAD882GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 280
; Power [PS]: 789; Gross weight [kg]: 7500; Engine: Volvo TWD1683GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 600
; Power [PS]: 36; Gross weight [kg]: 835; Engine: Yanmar 4TNV98C-33G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, CEE 63A 400V 5P, CEE 32A 400V 5P, CEE 16A 230V 3P, , Prices when changing alternator options may differ from the price online.; Water Tank Volume [l]: 100
; Power [PS]: 48; Gross weight [kg]: 1000; Engine: Yanmar 4TNV98CT-44G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, CEE 63A 400V 5P, CEE 32A 400V 5P, CEE 16A 230V 3P, , Prices when changing alternator options may differ from the price online.; Water Tank Volume [l]: 120
; Gross weight [kg]: 4950; Engine: Volvo TAD1642GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 900
Soundproof Diesel Generator Set Emergency Generator Set Manufacturer: Lucla Type GLU-33-SK Specifications Continuous power: 30 kVA Standby power: 33 kVA Mains voltage: 400/230 V Amperage: 43.3 A Max. sound level: dB(7m) =78 Engine: KOFO Model: K4100D Intake system: naturally aspirated engine Fuel Injection System: Eddy Number of cylinders: 4 Displacement: 3,613 L Bore x stroke: 100x115 mm Compression Ratio: 20:1 Nominal speed: 1500 r/min Engine power: 33 kW Controller: Mechanical Starting voltage: 12 V Generator: Lucla Model: LU 184GS Phase: 3 Voltage: 400 V / 230V 43.3A Line type: 3 phase 12 cable, Y type Stock: 1 Power factor (cos f): 0.8 Frequency: 50 Hz Continuous power: 30 kVA / 24KW Arousal Type: Brushless, Self-Arousal Voltage Regulation: % ±0.5 Protection class: IP 23 Degree of insulation: H Altitude(above sea level): m =1000 Controller: ...
; Gross weight [kg]: 2350; Engine: Iveco NEF67TM4.S500; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224
; Gross weight [kg]: 5230; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775
Key data: 750 mm, 500 mm, 64 A
Inv. Num. : 5897 Type: Roboform 54P Producer: Charmilles Created: 2000 Parameters: Table dimensions: 750x500 mm Maximum operating current: 64 A Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 450 mm Container dimensions: 1200x775x385 mm Machine weight: 3000 kg New Source
Key data: 451 KW, 1500 1/min
Year of manufacture 10/2020, engine in running condition and has only a slight leakage at the oil pan. A total of 11,000 operating hours.
; Gross weight [kg]: 5071; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 842
58 Mw MAN 18V48/60TS power plant 50 Hz 3 x Man 18V48/60TS generators together with auxilary equipments Approx 4000 Working hours each 58 Megawatts total power 19305kw each at 500 RPM and 50 Hz Engines year of build 2014 with ABB AMG1600UU12 DSE Alternators Alternators year of build 2015
; Gross weight [kg]: 5395; Engine: Perkins 2506C-E1STAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 775
; Gross weight [kg]: 1989; Engine: Perkins 1106A-70TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224
; Gross weight [kg]: 1658; Engine: Cummins 6BTAA5.9-G12; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185
Key data: 1180 KW, 1910 1/min
TO WHOM IT MAY CONCERN WE VE MTU ENGINE 16V 396 TB 34D EX GEN SET ENGINE AT OUR STOCK. ENGINE WAS USED EMERGENCY GENSET ENGINE . IT WAS USED ONLY 267HRS SINCE NEW ... ENGINE IN VERY GOOD CONDATION . PLS FIND ENGINE DETAILS ON BELOW TYPE : 16V 396 TB 34D ENGINE NO. : 5591283 YOB. : 1993 POWER. : 1880 KW .RPM. : 1910 / 1500 1/min ENGINE AT OUR WORK SHOP READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .
; Gross weight [kg]: 10213; Engine: Cummins KTA50-G3; Accessories: Battery, Control Panel, Including: Engine coolant and alternator heater
Key data: 33 KW, 45 kVA, 230 V
Nominal power (PRP) kW 37.7 Nominal power (ESP) kW 41.8 Manufacturer: YANMAR Model No.: 4TNV98TZGGEHR Engine Type: Diesel, Four-Stroke Type of Injection: Direct Type of intake turbocharger Cylinders, number and Arrangement 4-L Diameter x travel mm 98 x 110 Total displacement L 3,319 Cooling System Coolant Engine Oil Specifications API CF,CF-4,CI-4 Compression Ratio 18.1
3-channel foil nozzle EDS FSK-600 with flex lip (tire tubes) Output capacity: 40 -50 kg/h Lip adjustment with screws and storage beams in the main layer Film width: max. 600 mm Film thickness: 0.1 – 3.0 mm 3 computer-calculated hanger channels for optimal melt distribution Distribution: A 10-15%, B 70-80%, C 10-15% Drilled nozzle lip for liquid temperature control 9 heating zones with high-performance cartridge heaters Connected load for nozzle: 18 kW (0.5 kW x 36) Fully wired for 240 V / single-phase Nozzle dimensions (L x W x H): 450 x 650 x 400 mm, weight: 760 kg Coex adapter block for one middle and two outer layers Dimensions adapter (L x W x H): 320 x 210 x 400 mm Remark: Tool steel 1.2311 All flow surfaces are chrome-plated (25-30 μm)
maximum number of results exceeded
please refine your search
