extrude used for sale

Two-station machine up to 3 ltr. Extruder 70/24D. Triple head 85 mm center to center. Moog TMC 3 control. Triple Proportional control for mold / carriage / calibration. Leak test pre-staged

screw ø:: 90 mm screw length:: 20D screw speedl:: 0 - 60 U/min Condition: NEW, Specification: Rubber vacuum extruder - with warranty - Screw diameter: 90 mm - Screw length: L = 20 D (approx. 1,800 mm conveying length) - Screw speed: 0 - 60 rpm - Centre height of extruder: approx. 1,125 mm incl. base frame - Max. permissible injection pressure: 500 bar - with feed roller - Extruder water-tempered - Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump - Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm - Vacuum cylinder: three tempering zones BL = 1,057 mm - End cylinder: one temperature control zone approx. 4D = 360 mm - Number of tempering zones: 5 - Heating capaci ...

Hole diameter maximum: 0 mm Grinding wheel diameter: 0 mm Workpiece height maximum: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 805 (Hardware 80310, Software 4.1) Technical data Max. work piece diameter: ca. 20 mm Workpiece length max.: 100 mm Motor capacity: grinding spindle: 0.5 kW Voltage: 380 Volt Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1750 mm Width: 1400 mm Height: 2200 mm Various accessories: Dust extractor Automatic extruder Security-protection panel Workpiece loader Workpiece conveyor

Two-station machine with double head for container 5 ltr in double cavity or triple head for subject 500 - 950 ml. Extruder S 100. With removal robot, conveyor belts for bottles and waste. Mill, cooling unit, material handling. 380V 60 Hz

Well maintained machines. Extruder 50/20D. Double head 100 mm stitch.

accuhead machine, 300 kN clamping force. Extruder 80/24D. Accuhead 5 ltr. Die dia from 20 to 200 mm. mould dimensions: 800 x 700 x 2x250 mm (LxWxD) Spreading device, needle blow, waste punch, interval blowing, core pulls. Machine can be viewed under power until the end of January 2022

Manufacturer: Blow Moulding s.r.l. Machine type: BM 2000 D (CoEx) Stations / Stations: Double / Double Year of construction / built: 1999 Location: Europe/ Europe Control type / control system: Original control (Microset) Number of extruders: 4 Extruder sizes: 60, 35, 60, 35 - (24D) Hose head / parison head: NEWMA 6-layer CoEx single-head (New) / NEWMA 6-layer CoEx single-head (New) Mould platen sizes (mm): 290 x 380 Flaschenvolumen Max. / bottle volume max.: 3,2 Lit. Clamping force: 55 kN Accessories: - Viewing strip extruder / Viewstripe extruder - 2x rotating wide neck edge/ 2x rotary trimming devices - 5 suction conveyors for material/ 5 suction conveyors for materials - 1 dryer on extruder no. 4 – EVOH 1 dryer on extruder no. 4 – EVOH - 1 dispenser on the extruder No. 1 – main batch 1 dispenser on extruder no. 1 – master batch - 1 dispenser on ex ...

Complete Chonglee High tenacity yarn ( Both PET and PA) spinning lines available for sale, manufactured by Chonglee in 2012, consist of 7 individual line, 4/8 ends winder, chuck length, 1200mm, 4/8 ends changable,10 / 8 hot godets, each pos. has 8 packs & spinnerets, 90mm,5.0 meter, can spin 400-1500d yarn, strength 9.2-9.5 gpd, Total 27 positions. from extruder to winder. Stopped 2 months, just complete refurbished last year, very good condition, can be soldl separately; A. line: with 6 pos, 150mm extruder, 10 godets B. line with 4 pos., 135mm extruder, 10 godets C. line: with 4 pos.135mm extruder, 10 godets D. line: with 1 pos.105mm extruder, 10 godets E. line: with 6 pos.150mm extruder, 8 godets F. line: with 3 pos.120mm extruder, 8 godets G. line: with 3 pos.120mm extruder, 8 godets Serious buyer contact us. serious buyer contact us.

We can offer you a complete line of Breathable menbrance extrusion line,manufactured by Colines,Italy in 2009,the line has just installed and adjusted,never used for production,like new line.the products-- breathable menbrance is for making diaper and hygienic materials.the net web width is 2850 mm,2 extruders,a 90 mm and a 150 mm,,serious buyer contact us,please Please visit manufacturer's website: .colines.it to learn more about this line.

Description Regranulation Line complete of granulator Extruder Diameter 60 L/D 35 Silos for forced feeding of film Granulator 35/45 Vent Screen changer Centrifuge

Single-station machine for containers up to 5 ltr. Extruder 60/24D. ERinfachkopf W. Müller type S1/90. Nozzle up to 90 mm. Prpoprtional control for wagons / shape / calibration. Item removal. Mould dimensions: L 400/450 mm, W 350 mm, D 2 x 130 mm. Mould opening variable. PLC control

Description Tecnova regranulation line Single Screw extruder 105 L/D 36 nr.1 vent with vaccum pump Silos for foil feeding Granulator Meccanoplastca MZ 44/55 year 2006 Conveyor for granulator feeding with metal detector CEIA

Description Press with electric extruder NO ROBOT

Description Single layer blown film line Extruder diameter 105 L/D 30 Extrusion head with die 500 Dosing units DS&M Still haul off Twin winder working width 2200

Extruder for the production of three-layer LDPE film, German company Kifell. Capacity -150 kg/h. Foil thickness 0.03 - 0.2 mm. Width of upper rollers 1500 mm. Dolici double-sided winder 1230 mm. The width of the mouthpiece is 70 mm. Year of production 1985, in continuous production since 2010, available for viewing and testing in our company.

Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available

Two-station machine for articles up to 5 ltr. Extruder 90/24D, quadruple head 4 x 45 mm center to center. Clamping force 83 kN. 460V 60 Hz Good condition

Single-station machine for articles up to 5 ltr. Extruder 80/24D, double head 160 mm center to center. Trim cutting in the machine. 460V 60 Hz Good condition

There is a complete underwater pelletizing system with vibrator, heat exchanger, centrifuge, extruder, pelletizer, water basin, sieves, knife blocks, documentation and other spare parts available, a sieve changer is available separately, an inspection is possible.

- Manufacturer: Bekum - Machine type: BAS 34.2 - Stations / Stations: Single station / Single station - Year of construction / Built: 2001 - Location Germany - Control system: Original Bekum Beckhoff - Extruder | Extruder: 100/24D - Hose head / Parison head: AKZ4 (New by UES !) - Mold dimensions mm /mold dimensions mm (A length/ length x B width/ width x C depth/ depth): 700/700/2250 - Bottle volume Max./ Bottle volume max.: 30 lit - Monitor language: German/English - Delivery time | Delivery time: 30 days/ 30 days - Weight (kg): 13000

Complete regranulation plant OMP Prealpina Type:ES-130. Screw and cylinder were renewed in November 2021 A new groove bushing as a spare part Simple degassing with vacuum pump DC drive used for PE/PP. Throughput at PE approx. 500-600kg. at PP.450-500.kg. per.h. Consisting of foil silo with agitator and discharge screw. Regrind/granulate dosing screw. Masterbatch dosing screw Tamping plant Extruder 130 L/D Hot tee granulator( also water ring granulator) Centrifuge Classifying sieve Removal with pressure blower. Plant is tested and stored (immediately ready for use)

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder

Extruder 65/22D. Battery head 3.7 ltr. Locking plates 600 x 600 mm. Clamping force 630 kN. New Beckhoff control system installed in 2019. Available immediately from stock

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Stock No. 2587 1 used pelletizing plant, functionally tested, Throughput up to approx. 600 kg/h depending on the material, consisting of: 1 volumetric dosage Extruder Plastmachines Type PME 100 Single screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backwasher incl. Hydraulics 3 kW Strand head with holes 20 x Ø 3.5 mm Continuous cooling pool 400 x 4000 mm with strand guide rollers Strand extraction Strand pelletizer SG 300 ResoTec control / control cabinet Viewing by arrangement - at short notice More pelletizing lines / extruders available from our Wuppertal plant & ready for demonstration

Other Info: 1 Hardened Steel Nozzle High temperature hardened steel nozzle enables advanced material usage and quality results. Advanced auto leveling and calibration insures high precision accurate parts. Heated Chamber Ensure Excellent Print Quality The heated chamber keeps the printing temperature constant for excellent performance on complex geometries. High Performance Dual Extrusion The high performance dual extruder allows for use of advanced materials like PETG, ABS, PLA, Tough PLA and of course water-soluble support material. Double Capacity Supports Large-area Continuous Printing without Interruption Two 3kg rolls capacity extends ease of use and change over intervals. Y tube connector can replenish the filament immediately if ran out of the filament from one side.   Fused Filament Fabrication (FFF) It is a 3D printing process that uses a continuous filament ...

Key data: 130

Extruder 1 spindle : 130 mm Ø, 35 L / D, for grancear plastics, brand: Plasco, with forced feeding. Degasser, with vacuum pump: 15 hp. Filter changer: 260 mm, overhead cut to water. Vibrating screen and motor: 238 KW with variable speed drive and electrical panel. GT-2982

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

Key data: 60

Extruder 1 spindle: 60 mm Ø, 25 L/D, brand: Flag. No motor, no electrical panel, with 6-speed gearbox.

Key data: 120

Extruder 1 spindle: 120 mm Ø, 35 L/D, for graining, brand: FBM Falzoni, with degasser. Vacuum pump: 5.5 Kw, Hydraulic filter changer: 160 Ø. Overhead cut to the water and centrifuge. Extruder motor: 180 Kw, with variable speed drive.

Key data: 50

Extruder 2 spindles: 50 mm Ø 12 L/D, motor: 4.5 kw, without electrical panel.

Key data: 125

Extruder 1 spindle: 125 mm Ø, 35 L/D, brand: Eurotecno, with forced feeding, degassing. Motor: 160Kw, hydraulic filter changer: 250, wire head. Bathtub and noodle, Brand: RIETER 200. Year: 1999. Production: 500Kg/h.

Extruder 2 spindles 18L/D, model: BK-50-93, tapered spindles, brand: Volcano, with motor: 25hp, with variable speed drive. Degasser and dispenser of material and electrical panel.

Key data: 120

Extruder 1 spindle for manufacture of pellets. 120 mm Ø, 35 L/D, brand name: FBM ( Falzoni), type: ETF 120 V 380/5L, year: 1988. Engine: 200 KW. Degasifier and filter changer. Head cut under water, year: 2006, brand: PRT and force-feeding silo.

Key data: 60

Extruder 1 spindle: 60 mm Ø 32 L/D, Amut brand, variable speed motor Elektra Faurndau: 7 to 24 KW, with electrical panel and wire head for pellets: 23 holes and electrical panel.

Key data: 50

Extruder 2 corrotating spindles: 50 mm Ø, 40 L/D, brand: ICMA SAN Giorgio, with double degasser. Motor: 57.5 Kw direct current with drive. Material dispenser and thread head (spaghetti), with electrical panel.

Key data: 120

Extruder 1 spindle: 120 mm Ø, 35L/D, brand: Union, with degasser, hydraulic filter changer: 150. Year: 1987.

Key data: 120

Extruder 1 spindle : 120 mm Ø 35 L/D, make: Union, motor: 110 Kw (150 hp). 4.2 m. long. With degasser, filter changer: 220 mm, overhead cutting to the water with centrifuge and screen. Electrical panel with variable speed drive.

Key data: 60

Extruder 1 spindle: 60 mm Ø, 25 L/D, brand: Safinio, motor: 20 hp, variable speed drive, brand: Omron, model: F7, alternating current: 30 kw and electrical panel.

Line for complete PE pipe, with automatic dropper inserter. Brand: TRIMEC. Year: 1994. Composed of : A.-Extruder TRIMEC TM 75/30D. Engine: 57.5 kw. Hopper loader. B.-Head for tube. C.-Loader system drippers, with accumulator tank and insertion of TRIMEC drippers. D.-Vacuum bathtub and stainless calibration: 5 meters VC/1. E.-Stainless cooling bathtub: 5 meters. VR/1 F.-Stainless cooling bathtub: 5 meters. VR/1 G.-Interline drill with guillotine TRIMEC DRTS PERFORATING DEVICE. Type GF/1. H.-TRIMEC stretch trolley: 2 TR/1 bands. I.-TRIMEC winder, type: ML3/1.

Key data: 90

Granceado line (Pelletized) extruder 1 spindle: 90 mm Ø, 35 L/D, brand: Eurotecno. Hydraulic filter changer: 160 Ø, pellet head, bathtub, noodle and electrical panel with motor: 106 Kw, dc and variable speed drive.

Key data: 100

Extruder 2 spindles: 100 mm Ø, 21 L/D, brand: Industrie Generali, model: CGB 100, engine: 84.7 Kw, degasser, vacuum pump, head and overhead cutting to air. Electrical panel.

Key data: 90

Extruder 1 spindle Brand: Eurotecno, 90 mm Ø, 33 L/D. Electrical panel, filter changer: 160 mm, wire head for graining, stainless bathtub: 3 m, without motor. Eurotecno noodle model G-400 with blades: 300 mm.

Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal.  ...

Key data: 130

Granceado line (pelletized) Extruder 1 spindle, brand: Previero Sorema 130 Ø 35 L/D, motor: 250 Kw with variable speed drive. Degasser, hydraulic filter changer: 215 mm, overhead cutting to water, centrifuge, discharge cyclone, tromel: 1 m, rotary valve, solids transport vacuum cleaner. Forced feeding with silo: 11,000 l. with remover. Exit cyclone for dust.

Key data: 60

PE pipe extrusion line - 1-screw extruder: 60 mm Ø, 28 L/D with motor: 37 KW (50hp) with AC speed variator, electrical panel with tube head for 16 and 20 mm. - 3 m vacuum and cooling bathtub with vacuum pump: 5.5 hp. - Cooling bath: 2.5m - Drag trolley (Track): 800 x 100 with variable speed drive. - Minimum inner double coil winder: 330 Ø maximum external 1,200.

Key data: 65

Extruder 2 corrotating spindles: 65 mm Ø, 30L/D, brand: Maris, model: TM-65 V. Shirt and spindle compatible by segments. Degasser, motor: 90 KW DC, with variable speed. Thread head and 2 spare spindles.

Used hard PVC granulation plant after reconditioning Capacity approx. 200 - 300 kg/h, consisting of: 1.Extruder Krauss Maffei KMD 2-60KK (twin-screw, oblique screws), Year Built 1996 Main engine 37kw Heaters controlled by thermoregulators Heaters of German production Degassing – pump Screw diameter: 60-125 mm Screw speed 37.5 rpm Oil-thermostated augers externally Heating power of snails 6kw Screw cooling power 7kw Oil-cooled cylinder 4 zones on the cylinder (including 3 heating and cooling zones) Gefran/ Gneuse mass pressure sensor – Gefran/Gneuse ground temperature sensor Cylinder cooling power 14kw Capacity up to 300 kg/h 2. rotary filter (sieve changer) Manufacturer: Gneuss Type SF-90 – capacity up to 350 kg/h 3.Cutting in hot air system 4. granulate cooler with conveyor fan