extrude used for sale

BLOWN FILM LAB EXTRUDER, suitable for testing granulate, 25 mm screw Ø 25 L/D, 60 mm diam. die, 500 mm. pull off, 350 mm collection frame, 7,5 kW drive, complete with tower, nips and rolls, control panel, production rate 10 kg/h, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked

Haendle Extruder type PZG60b/50 with doubleshaft mixer MDVG920a, 29 cbm/h, 30 bar

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, spare : 2 screws and 1 barrel reconditioned to 100% performances, Mounted: screws + barrel in very good conditions, n.1 dosing unit with hopper, N.2 vacuum degassing points, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, on separate request), hydraulic pack, fitted with strand die (available with water ring pelletizer on request) + stainless steel cooling bath with heat exchanging unit + air-blowing dryer, electric cabinet (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The line is offered totally or partially reconditioned (photos show the machine during reconditioning), installed power - used power in work: about 60-65% : 13 ...

BLOWN FILM LAB EXTRUDER, suitable for testing granulate, for LDPE and HDPE, die diam.97 mm., 800 mm wide single winder, fixed pull off, fixed die head, Maximum throughput rate 35 kg/h, height of pul off 3.700 mm from ground, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked

KAUTEX KCC30 Extrusion Blow Molding Machine Year: 2012 Operating hours: 33,000 h 1 station Clamping force: 300 KN Screw diameter: 90 mm 4 kg accumulation head (HDPE)Platen Dimensions : 530 x 700 mm Distance between plates 1000 mm Maximum mold dimensions: 870 x 650 x 765 mm Control system Blow command Head type: Vertical head with hydraulic accumulator Maximum container volume: 30 liters Die diameters: 90, 150, 170, 190 or 220 mm Maximum pressure: 220 bar Air consumption: 95 m3/h Pressure air: 6 - 10 bars Installed power: 20 KW Number of temperature zones: 5

Rod line consisting of: Feeding system with agitated hopper Werner & Pfleiderer extruder ZSK model Ø53x33D twin-screw Manual filter changer, CFM75 model 10-strand + 6-strand rod granulation head TI400/4 4 M immersion tank Periplast dryer Granulator Screening

Clextral extruder, Type: Evolum EV032 M, Extruder: 40D, Barrel length: 10 x 128 mm, Stroke length: 1420 mm, Water: 4.5 - 5.5 Bar, Compressed air: 6 Bar, Steam injection: 2 - 6 Bar, Power: 3 x 400V, 50Hz, 83kW, Dimensions: 4475 x 1200 x 2100 mm, Weight: 1905 kg, Only 80 working hours!, Clextral water pump, Type: CLX DKM, Flow: 6 - 42 l/h, Pressure: max 10 Bar, Reservoir: 7.5 litre, Power: 0.55 kW, Dimensions: 1265 x 350 x 700 mm, Cextral / Prominent oil pump, Type: GMXA1604, Flow: 0.3 - 2.5 l/h, Pressure: max 10 Bar, Reservoir: 10 litre, Dimensions: 900 x 700 x 1150 mm, Clextral High Moisture Extrusion Cooking die, HMEC type: 2 x 800 mm length, Material: CLX202, Internal section: 60 x 8 mm, Dimensions: 1900 x 700 x 1200 mm, TLV steam kit, Type: 2/10 TLV, Serial number: SV148, Steam flow: 2 - 10 kg/h, Steam pressure: 6 - 10 Bar, Maximum pressure: 10 Bar, Steam inlet: DN15, PN16, Steam outl ...

PowerHeater PH100-1, Capacity: 150 - 240 kg/h, Steam: 50 - 100 kg/h, 10 Bar, Compressed air: 6 - 8 Bar, 50 Nl/min, Water: 16 Bar, 1500 l/h, Power: 3 x 400V, 50Hz, 1.5kW, Dimensions: 3000 x 1400 x 1800 xmm, Weight: 850 kg, Klovborg slab-outlet conveyor, Serial number: 220188-2, Power: 230VAC, 50Hz, 1Ph, Dimensions: 1250 x 500 x 1450 mm, Weight: 65 kg, Source Technology screw trolley (2 pc.), Serial number: 65800-41-110562 / 66400-33-110562, Working load: 250 kg, Dimensions: 1500 x 1400 x 1950 mm, Weight: 100 kg, With Kito CX003 manual hoist

FREY MASCHINENBAU Vacuum Filler DVM FROMAGRO Vacuum Extruder Filler PUSHER Vacuum filler Auction-ID: A1-47049-30

Technical details Type: Stainless steel boilie extruder / paste extruder Application: - Fishing boilie production - Animal feed paste processing - Feed and mixture extrusion Tub capacity: 50 L Power supply: 220 V Screw speed: Variable, 0–80 rpm Configuration: - Integrated paste mixer - Mixing paddles for paste/hull processing - Variable speed screw drive - Start/stop controls - Emergency stop button - Reverse function Construction: Full stainless steel construction Features: - Easy to clean - Easy maintenance access Condition: Functional, ready to work Auction-ID: A7-40834-8

Technical details Manufacturer: Vimar (partially visible) Type: Industrial bread crumb grinder / dry bread crusher Configuration: - Stainless steel feed hopper - Enclosed grinding/crushing chamber - Front discharge outlet - Flexible feed/discharge tubing - Heavy-duty drive housing - Floor-standing industrial base Construction: Painted steel and stainless steel Power supply: Industrial electric, 3-phase connection Application: - Breadcrumb production - Dry bread grinding - Bakery waste recycling - Industrial bakery processing Dimensions: - Length: Approx. 1200 mm - Width: Approx. 800 mm - Height: Approx. 1500 mm Weight: Approx. 350 kg Condition: Used Auction-ID: A7-47053-58

PMH Plastic Extruder Line Consisting of the following components: EX 30-28D Extruder Vevor CW-3000 industrial cooler Cool 2000 cooling water bath (2 pieces) with heat exchanger IN07 water drainage AB50 filament deduction with laser measuring system W250 filament winder Year of construction: 2023 Single screw 6 heating zones Sikora measuring system Gefran control display 380V and 220V connection Complete documentation (German) Supplier of the complete line includes: www.pmh-extruder.com In working order. The components are not directly connected to each other and can be loaded and transported separately. A forklift is present at the seller's premises. Auction-ID: A1-41998-4