extractor used for sale

Bending machine and core extractor. Guaranteed excellent condition and operation, also different types of rollers and cores. year 1994

Equipped with 2 grinding units Including wet extractor (suitable for aluminum, among others)

This Geminis GHT 11 G4 2200x8000 Lathe was manufactured in the year 2010. It is equipped with a Fagor 8070 control unit and has 2 axis. The machine has a spindle bore of 162 mm, it includes a steady rest, chip extractor, electronic handwheel, machine leveling supports, and various turret tool holders as additional equipment.

Description Industrial fume extractor composed of: - Ferrari Ventilatori Industriali brand centrifugal fan - engine: 22 kW - rpm: 1470 (automatic rpm adjustment based on depression - controlled by Toshiba inverter) - air flow: 48.440 m3/h - soundproof cabin - control panel - no pipes or filters

Description REG-MAC DENSIFIER - REVISED MACHINE WITH REVIEWED EXPERTISE - - Model T 340 - Year 2001 - 450 kW motor - 4 kW steam extractor -Diameter Barrel 1300mm - Dimensions: 3950x2280xh3500mm - Hydraulic unit (0.17 kw) for hub bearings lubrication - Water cooling system - Exhaust port with pneumatic opening

Description Winder with rolls extractor

Mobile dust extractor SCHUKO Type: Vacomat 200 XP Technical data: Connection Ø: 200 mm Filter cleaning: pneumatical (manual start) Volume flow: 2262 m³/h Motor power: 4,0 kW Filter surface area: 14,5 m² Test sign H3 / BGHM HO 123027 Dust level M, AWN 16 Noise absorbation: 73 dB(A)

Mobile dust extractor SCHUKO Type: Vacomat 180 XPe Technical data: Connection Ø: 180 mm Filter cleaning: motorical Filter surface area: 13,5 m² Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Dust level M, Test sign H3 / BGHM HO163002 AWN 16 Cone Noise absorbation: 74 dB(A)

S. No.: AAC02761-0502-6018 REV 3 Speed: up to 17 p / h Counter: 17.067 plates Format (mm): max. 560 x 576 // min. 240 x 240 Equipment / Additional information: - Dust extractor - Plate gumming device - Destacker - RIP

Mobile dust extractor SCHUKO Type: Vacomat 180 XP Technical data: Connection Ø: 180 mm Filter cleaning :pneumatical (manual start) Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Filter surface area: 13,5 m² Test sign H3 / BGHM HO 163002 Dust level M, AWN 16 Cone Sound absorbation: 74 dB(A)

System includes receiver tank with agitator, extractor, centrifugal pump, seal water tank, side channel pump, corner pipe strainer eluate line, corner pipe strainer condenser, vacuum unit, heat exchanger, condenser, conveyor unit V 3811 and 3811, sight glasses and fittings, with documentation.

LONG PASTA LINE 350 KG./ HOUR - Continuous automatic line for the production of used and totally overhauled as new Long Pasta. Production capacity +/- 350 Kg./h. reference to spaghetti with a diameter of 1.7mm. Consisting of: N. 1 Press Mod. Braibanti type Mabra 1R N. 1 Spreader for rods from Mt. 1,64 Mod. Stedo UNI 164 N. 1 VAT type registration from Mt.8 N. 1 Dryer Mod.Braibanti type LPG 4PV + 1R Storage silos with 6 floors of 11Mt. IPAC type automatic extractor Packaging Line. The line was tested then the pasta factory closed so the electrical and plumbing systems are new and recoverable.

Gebr. Rack oven Hein Luxrotor LR-86-H, overhauled, 9.6 m², 82 kW, 400 V, 50 Hz, for sheets 60 x 80 cm, with 2 rack trolleys, with touchscreen control, extractor hood, stone wall, without burner, external dimensions (W x D x H) 155 x 142 x 260 cm, year of construction 2011, construction no. 3000857

max. grinding diameter: - mm grinding length: - mm workpiece length: - mm Control: NUM 1060 weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2850 x 2525 x 2867 mm 6-axes CNC Tool Grinding Machine. CNC control NUM 1060 The machine has a standard software package (grinding software, oscillation, dressing software and measuring software) and is programmed in DIN/ISO code. Travels: Cross axis X 360 mm Height adjustment Y 150 mm Infeed axis Z 230 mm Swivelling axis B +/-120 deg. Tilt axis A: -15...+25 deg. Dividing attachment with cylindrical grinding mode W20 clamping variant (C-axis 1000 rpm) 6-station turret grinding head tiltable: Grinding spindle Ø 80 mm, number 6, arranged in a star shape Grinding wheels Ø max. 250 mm Grinding spindle drive 7.5 kW, speed 12000 rpm. Measuring station 3D - swiveling - without probe Dressing device for automatic dressing of diamond and CBN ...

Plant includes receiver tank with agitator, extractor, centrifugal pump, sealing water tank, corner tube sieve eluate line, corner tube sieve condenser, vacuum unit, condenser, oil heat exchanger, conveying unit V 3825 and 3821, sight glasses and fittings, with documentation.

SOITAAB CNC plasma cutting with 2 generators Year = 1998 Plant size: center distance = 6000 mm. Useful length 24 thousand mm. Implant length = 26 thousand mm. Speed allowed with double motorization 20 thousand mm./ min. Operating speed up to 5000/6000 mm./min Numerical control = OSAI 10/310 TFT with 10.4 "color monitor Plasma generators No. 2. - Hyperterm HT 2000 System in operation, complete with bench and NOVA VIT fume extractor complete with star valve, direct discharge of cutting dust in standard big bags.

Standard Configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 5000, radio-frequency excited, chiller, logbook function Laser ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? Drives: Gantry drive in combination with linear direct drives ? Laser power control ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? PCS Process Control System ? DIAS capacitive height regulation ? High-speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Automatic nozzle cleaning ? Laser cutting head with 5? lens and laser cutting head with 7.5? lens ? Cutting head quick-change device ? Automatic sheet edge detection ? Positioning laser diode ? Programmable power cycles ? Microweld ? Automatic focus adjustment AutoLas Plus ? Oil spray device for reliable thick plate machini ...

Industrial flatbed cutting machine for cutting, engraving and routing Comagrav Digi 1730 Year: 2015 size: 1700 x 3000mm Equipped with: Camera recognition system Ceramic spindle 24000rpm PILOT extended 3D control system Becker vacuum pump Dust Extractor Material: Acrylic glass plexiglass, Dibond, Aluminum, PVC, ABS, Wood,Mdf Specification: Work surface size – active cutting part 1700 x 3000 mm Maximum height of cut material 60 mm Working feed speed 1150 mm/s - 69 m/min Maximum acceleration 3000 mm/s2 Resolution 0.00076 mm Spindle power up to 2 kW

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Gantry drive in combination with direct linear drives ? Automatic pallet changer ? Longitudinal conveyor for small parts / slag ? Enclosed beam delivery system ? 19? Touch screen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine ? Automatic nozzle cleaning Trumpf Laser ? New generation CO2-Laser TruFlow 6000, energy-efficient ? Maintenance-free radial turbine blowers ? Radio-frequency excitation ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device UTI ? LensLine with status control ? ControlLine: Height regulation and sheet edge sensing ? Lens with RFID-chip Control ? Easy shopfloor programmi ...

Fully automatic hardening line consists of: 1x hardening furnace with salt bath LLF-8/G/X-S (gas-heated) 2x tempering furnace FVF-8/E/X-R (electrical heated) 1x tempering furnace FVF-8-G/X (gas-heated) 1x washing machine WCF-8/X/3/E-R (electrical heated) 1x fine filter for wasing machine 1x desalination plant DS-80/E for washing machine 1x salt transfer container (salt storage for hardening furnace) 1x magazine with loader and unloader 1x transport roller conveyor 2x lift table (charge and discharge) 1x extractor hood over the entire length of the driveway 1x cooling place

Standard configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 5000, radio-frequency excited, maintenance-free turbo radial blowers, chiller, logbook function ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? Automatic sheet edge detection ? APC Advanced Process Control ? PCS Process Control System ? Programmable power cycles ? Microweld ? Automatic nozzle cleaning ? Programmable cutting gas pressure setting ? Laser cutting head with 5? lens and laser cutting head with 7,5? lens ? Cutting head quick-change device ? NitroLine ? Positioning laser diode ? PlasmaLine ? SprintLine ? ContourLine ? ControlLine ? PierceLine ? FocusLine ? Laser power control ? Oil spray device for reliable thick plate machining ? Automatic shutdown ? Work area lighting ? Sinumerik 840D con ...

Standard configuration ? Solid machine frame with integrated laser unit ? CO2 laser TLF 2700, radio-frequency excitation, chiller ? Motors: maintenance-free 3-phase servo motors ? NitroLine High pressure cutting ? High-speed processing with SprintLine ? Programmable cutting gas pressure ? Laser cutting head with 5 lens, DIAS III ? Cutting head-quick change device ? ControlLine ? Laser power control ? Laser logbook function ? Automatic shutdown ? Work area lighting ? Sinumerik 840D control: Open PC-based control system, easy to use, Online help, diagnostic functions, maintenance logbook, technology data,Teleservice, 3.5 floppy drive, RJ45/BNC network connection ? Safety: Multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, multi-chamber exhaust system and compact dust extractor, safety cabin with Macrolon panels ? Part removal station PRS 3001  ...

Standard Configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 5000, radio-frequency excited, chiller, logbook function Laser ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? Drives: Gantry drive in combination with linear direct drives ? Laser power control ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? PCS Process Control System ? DIAS capacitive height regulation ? High-speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Automatic nozzle cleaning ? Laser cutting head with 5? lens and laser cutting head with 7.5? lens ? Cutting head quick-change device ? Automatic sheet edge detection ? Positioning laser diode ? Programmable power cycles ? Microweld ? Automatic focus adjustment AutoLas Plus ? Oil spray device for reliable thick plate machini ...

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? Single cutting head strategy ? Chiller ? Automatic pallet changer in longitudinal direction ? Conveyor belt for small parts / slug ? 17 Touch screen ? Work area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2 laser TruFlow 5000 with optimized standby including beam guidance ventilation with N2 ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Laser control TASC ? Laser power control ? Logbook function laser Cutting head ? Lens cutting head with 250mm focal length ? Universal quickchange device for cutting head (UTI) ? LensLine with status check ? ControlLine: automatic height contr ...

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Gantry drive in combination with direct linear drives ? Automatic pallet changer ? Longitudinal conveyor ? Enclosed beam delivery system ? One cutting head strategy ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 6000 with optimized stand-by mode ? Maintenance-free radial turbine blowers ? Radio-frequency excitation ? Laser control TASC 3 ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device UTI ? LensLine with condition checking ? ControlLine: Height regulation and sheet edge sensing Control ? SIEMENS Sinumerik 840D ? Technology data is integrated ? Colour screen ? Automatic shu ...

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 21 tool stations, 3 clamps ? Drives with maintenance free 3-phase servo motors ? Repositioning unit with programmable stripper ? Ball tables ? Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 Good parts containers ? AutoLas TRUMPF Laser ? Laser unit: TruFlow 2700 CO2-Laser ? Radio-frequency excitation ? Chiller unit ? Laser control: TASC 3 ? Encapsulated beam delivery Cutting head ? Cutting head with 5.0 and cutting head with 7.5 lens focal length ? Cutting head quick-change device ? Programmable cutting gas pressure ? DIAS ? ContourLas Punching head ? Hydraulic punching head, 360? rotation for all tools ? Programmable presser foot for repositioning ? Tool length compensation ? Vacuum slu ...

Standard Configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? Chiller ? Automatic pallet changer lengthwise installation ? Longitudinal conveyor ? 17 touch screen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 3200 including NitroLine, with optimized Standby Modus ? beam tube purge with nitrogen ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Laser control TASC 3 ? Laser power control ? Logbook function Laser ? Laser cutting head ? One cutting head strategy ? LensLine with status check ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) ? ControlLine: Height regulation and sheet edge detection Contr ...

Standard Configuration Machine ? Closed machine frame ? Integrated cabinet ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Chiller ? Automatic pallet changer lengthwise installation ? Enclosed beam delivery via laser light cable ? Integrated electrical cabinets with inside light ? Wide longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Work area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine ? Automatic nozzle cleaning TRUMPF laser ? External solid state laser TruDisk 4001 with 1 fiber optic cable laser output ? Stimulation via pump diodes ? Laser power control Cutting head ? Universal cutting unit ? One cutting head strategy ? Protection glass to avoid lens contamination ? Online protection glass monitoring ? ControlLine Control ? Easy shop floor programming ...

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? One cutting head strategy ? Chiller ? Automatic pallet changer, lengthwise installation ? Longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 3200 with optimized standby ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Gas mixer (integrated) ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) incl. bus connection ? LensLine ? ControlLine: Height regulation and sheet edge detection  ...

Standard Configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 19 tool stations,2 clamps ? Drives: Maintenance-free, three-phase servo motors ? Programmable presser foot for repositioning with preselectable pressing force ? Sensor-monitored part chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 good parts containers ? Laser unit: CO2 laser TLF2700, radio-frequency excited, insulated against vibrations, integrated in machine frame, incl. chiller, and laser control DIAS 3 ? High speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Punch stroke / thread counter ? Laser cutting head: 5? lens, quick-change device, height regulation APC ? Additional laser cutting head with 7.5? lens ? Punching head: Hydraulic single tool adapter, 360? rotation of all tools,  ...

Standard configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 6000, radio-frequency excited, maintenance-free turbo radial blowers, chiller, logbook function ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? Drives: Gantry drive in combination with linear direct drives ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? Automatic sheet edge detection ? APC Advanced Process Control ? PCS Process Control System ? Programmable power cycles ? Microweld ? Automatic nozzle cleaning ? High-speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Laser cutting head with 5? lens and laser cutting head with 7,5? lens (for TLF 6000) ? Cutting head quick-change device ? Positioning laser diode ? Automatic focus setting AutoLas Plus ? Laser power control ? Oil spray ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 57670 € : 1153.4 € : 610 mm : 800 x 400 mm : 800 mm : 800 x 400 mm : 810 mm : 5 - 25 m/min : 0.74 kW : 10 kVA kW : 3540 mm : 2080 mm : 2100 mm : 2900 kg : 980 mm : 350 kg : 355 x 50 x 127 mm : 450 mm : 0 - 2.250 mm/min : 0,001 - 32 mm : 480 mm : 0 - 675 mm/min : 0,001 - 0,04 mm : 0,001 mm : 500 - 1.800 U/min : 3,75 kW : 1,1 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator man. extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment accor ...

Here we offer a well-maintained injection moulding machine. Manufacturer / Type:BOY Type: XS (100-14) Serial No.:will be communicated in case of interest Year of manufacture:2015 Operating hours:25.000 h Version:Procan Alpha 2 / S1 Clamping unit Clamping force:100kN tie bar distance:160 x 110mm (2 tie bars) Mould installation height min.:100mm Platen distance max:250mm Ejector stroke:50mm Injection unit: Injection unit:cylinder ø14mm Shot weight max.:6,1 g/PS Injection flow:22g/sec Spec. injection pressure:2298 bar Sprue extractor integrated Dimensions & weights: Weight with control cabinet: 485 kg. Length: 1480mm Width (machine only):520mm Height min - max:1380 - 1690mm Oil capacity:28 L The visible mini-laminar flow unit and the stainless steel area cover belong to the machine Other possibly visible peripheral devices do not belong to t ...

Miwe condo deck oven  Type: CO 3.0806  Specifications: 3 tiers 80×60 cm sheets Stainless steel cladding in black lacquered digital control Year of construction: 2016 with extractor hood  with lower tray for 60x40cm sheets mobile on castors Specifications:  400 / 230V 3/N/PE 50 Hz / 117.3 kW Dimensions:  Height: 210 cm Width: 100 cm Depth: 100 cm

8500mm Bunker Loader 4500mm Discharge System Rofin DC025 2500w Year: 2006 Modification to Process upto Ø152.4mm Dust Extractor

Miwe Floor Shop Oven Type: Condo 4.1208 Year of construction 2012 4 floors a 120x80cm with proofer Stainless steel cladding in black lacquered with extractor hood with steam destroyer Own rear control box Total 40kW on castors Height: 215cm Width: 150cm Depth: 120cm

In-store oven Miwe Aero e+ Type: Aero AE 4.0604 / 4.0604 2×4 editions 60×40 cm Stainless steel clad digital FP control Year of construction 2016 lower sheet metal shelf with extractor hood with steam destroyer mobile on castor Dimensions Height: 212 cm Width: 80 cm Depth: 100 cm Specifications 400/230 V 3/N/PE Kw.   17,2

Miwe aero in-store baking oven  Type: AERO AE e+ 8.0604 TC touch control for 8 trays 60×40 cm Proofing cabinet for 16 trays 60x40cm with stainless steel extractor hood with steam destroyer Year of construction: 2020 black front very good condition Specifications:  400V / 230V / 3/N/PE / 15,4 kW / 50Hz Electric Dimensions: Height: approx. 210 cm Width: approx. 90 cm Depth: approx. 100 cm

Miwe Aero Shop Oven  Type: AERO AE 8.0604 with FP control for 8 trays 60×40 cm Proofing cabinet for 16 trays 60x40cm with stainless steel extractor hood with steam destroyer Year of construction: 2018 black front very good condition Specifications:  400V / 230V / 3/N/PE / 15,4 kW / 50Hz Electric Dimensions: Height: approx. 210 cm Width: approx. 90 cm Depth: approx. 100 cm

THERMOFORMER, MULTIVAC, TYPE: M855FMC Technical description: Serial number: 1378 Format: (1x) 172 x 112 mm Power supply: 380/440 V - 50/60Hz Power: 7 kW Excess film extractor Dimensions: 4500 x 1300 x 1950 mm It includes: Automatic tray unstacker Filter unit Excess film remover

Miwe Aero Shop Oven  Type: AERO AE 8.0604 with FP control for 8 trays 60×40 cm Proofing cabinet for 16 trays 60x40cm with stainless steel extractor hood with steam destroyer Year of construction: 2010 black front Specifications:  400V / 230V / 3/N/PE / 15,4 kW / 50Hz Electric Dimensions: Height: approx. 210 cm Width: approx. 90 cm Depth: approx. 100 cm

TEPARK KPI-115-ST500 sandblasting cabinet manufactured in Poland in 2011 is used for thorough cleaning of small and medium-sized workpieces using abrasive materials such as electrocorundum or steel shot. The cabin sandblasting machine’s structure is made entirely of welded sheet metal to ensure high durability and tightness. Inside the machine is a fully lit working chamber with a 150 kg rotary table. The total weight of the sandblast machine is 280 kg. Technical data of the TEPARK KPI-115-ST500 sandblasting machine - maximum workpiece weight: 150 kg - work chamber size (L x W x H): 1150 x 900 x 800 mm - rotary table - injector gun - chip extractor: DEDRA DED7724 - workspace illumination - pressure: 10 bar - power supply: 230 V; 50 Hz - weight of machine KPI 115 ST500: 280 kg

Miwe Aero Shop Oven  Type: AERO AE 8.0604 with FP control for 8 trays 60×40 cm Proofing cabinet for 16 trays 60x40cm with stainless steel extractor hood with steam destroyer Year of construction: 2010 black front Specifications:  400V / 230V / 3/N/PE / 15,4 kW / 50Hz Electric Dimensions: Height: approx. 210 cm Width: approx. 90 cm Depth: approx. 100 cm

For sale: Multi-axis CNC lathe from Hyundai-Wia type LM 1600TTSY + LNS 3-meter bar magazine type Alpha 552. Beautiful versatile CNC lathe with lower and upper turret with 12 positions and intermediate positions each. The upper turret is additionally equipped with a Y-axis with a displacement of 100 mm (+50, - 50 mm). The machine is equipped with two identical spindles with a bar passage of 51 mm and a maximum speed of 6,000 rpm. The maximum turning diameter is 230 mm and the maximum turning length is 705 mm. Driven tool holders can be stored in all positions! The maximum speed on the driven tool is 5,000 rpm. The main motor power on both spindles is 15/11 kW and they are built-in spindle motors! The machine is also equipped with an automatic tool presetting device, a workpiece collecting device, a workpiece extractor for the right spindle, a workpiece discharge conveyor for the finished  ...

Used loading trolley washer for paloxes and big boxes KERRES, type: KBW800 - steam-heated with 70 kg/h (at 4 bar steam pressure) - HD centrifugal pump in stainless steel, 17 bar - Loading trolley 200 l - Suitable for big boxes 1.0 x 0.7 x 0.7m and 1.2 x 1.0 x 0.8m - incl. washing rack for lid for paloxes 1.0 x 0.7 x 0.7m - Printing technology from FESTO and SICK - Incl. chemical dosing pump - incl. extractor extraction (8m) - Incl. steam mixing valve - Incl. additional nozzles for floor cleaning of the big boxes El. Power: 400 V, 50 Hz, 16.5 kW Dimensions: L 4,165 x W 2,240 x H 3,030 mm Inspection and test run are possible by arrangement.

KRONES CONTIPACK A1 Extractor Capacity: 4,200 crates/h Heads: 5 R - L machine Ma-No. 23-0636009 LxWxH: 5000 mm x 2410 mm x 2850 mm Weight: 1.000Kg KRONES CONTIPACK A1 Unpacker Capacity: 4.200 crates/h Heads: 5 R - L machine Ma-No. 23-0636009 LxWxH: 5000 mm x 2410 mm x 2850 mm Weight: 1.000Kg

turning diameter: 640 mm turning length: 1585 mm control: SIEMENS 840 D swing diameter: 640 mm spindle distance: 1930 mm slide I - cross travel: (X1) 550 mm slide I - longitudial travel: (Z1) 1585 mm y-travel: (Y1) 220 mm b-axis: (B1) 240° deg. slide II - cross travel: (X2) 225 mm slide II - longitudial travel: (Z2) 1400 mm Travel subspindle: (Z3) 1500 mm spindle bore: 79 mm main spindle speeds:: 5000 1/min. Subspindle spindle speeds: 5000 1/min. main drive motor: (40/100% ED) 35/25 kW rapid traverse: (X1/Y/Z1) 40/24/70 m/min rapid traverse: (X2/Z2) 24/40 m/min milling head speed: 12000 U/min milling spindle drive: (40/100% ED) 22/13,2 kW dimensions of machine: 6,7 x 3,7 x 3,1 m total power requirement: 100 kVA weight of the machine ca.: 24 t First put into operation February 2005 Main and subspindle, 2 x C-axis 3-jaw power chuck RÖHM KFD-HS 250/3 for mainspindle 3-jaw power chuck R ...

Used deck oven HEIN, type: Universal -in bakery condition- - Deck oven with 4 shelves - 12m² baking surface - Analogue control - Extractor hood with fan - Condition: good, technically tested The oven is in good bakery condition and is ready for immediate use.

Suitable for fully automatic grinding of all known tooth geometries (e.g. flat, alternating, trapezoidal tooth) from HM – circular saw blades on the face and back in one clamping. The free programming also allows the Machining of special tooth shapes. Accesories: Pallet loader with 3 stations,, Coolant system with total enclosure,, Integrated hollow tooth grinding device,, Software package W 1 alternate tooth,, Software package W 2 flat tooth,, Software package W 3 flat/trapezoidal tooth (with tooth height difference),, Software package W 4 flat / roof tooth (with tooth height difference),, Software package W 5 trapezoidal tooth,, Software package W 6 pointed on one side,, Software package W 7 tooth face processing,,, Software package W 8 free programming of special tooth forms,, automatic tool positioning axis, Automatic D-axis for machining chip breaker grooves, auto. fire extinguish ...

Smoke system Schich with 2 chambers, shop smoke system, drying, hot smoking, cooling, with large extractor hood, smoke generator for wood chips, with some smoke sticks and grilles, insertion size 1/1GN, Overall dimensions WxDxH approx. 150x81x250cm, weight approx. 490kg, used, functional