extraction used for sale

Part Number 6322 TECHNICAL DATA - max width of the workpiece 260mm - max height of the workpiece 160mm 6 spindles: 1) horizontal bottom 260mm 7,5kW 2) vertical right 160mm 7,5kW 3) vertical left 160mm 7.5kW - 3 spindles electrically adjustable front/rear 0.4kW 4) horizontal top 260mm 11kW - 4 spindles electrically adjustable up/down 0.4kW 5) horizontal bottom 260mm 7,5kW 6) universal 230mm 7,5kW - universal spindle electrically adjustable up/down - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 1,2,3,4,5 50mm - universal spindle diameter 40mm - from above 6 pulling, toothed, metal, torsional introductory shafts, including 2 double - from above 5 pulling leads shafts, rubber, smooth including 3 double - from the bottom from the side of the pressure on the inlet - from below 2 pulling, metal, toothe ...

Used Apag SRV20 rotary / vacuum filter. - 20m2 filtration area - Filter drum diameter 1721mm - Length of filter drum 3750 mm - Rotational speed of the filter drum 0-9 r.p.m. - Vacuum pump capacity 450m3 / h - Extraction pump capacity 36m3 / h - Feed pump capacity 36m3 / h - Air consumption 1 Nm3 / h - Water consumption by a 1 m3 / h vacuum pump - Washing water intake 50-80 1 / m3 - 2.2 kW filter drum power consumption - Power consumption of the cutting knife cutting 0.18kW - Power consumption of the 11kW vacuum pump - 2.2kW feed pump power consumption - 3kW extraction pump power consumption - 1.1 kW coadiuvante mixer power consumption - Acid resistant design. - Weight 4300 kg. - Year of construction 2002. - Manufacturer's documentation.

In the case of spark-affected smoke and vapours, there is a risk of fire development in the filter material of the extraction system. For this reason, we recommend the use of the BOFA Spark Arresort 2 in such an application. This extinguishes the sparks to the required extent and switches off the extraction system at staker temperature development. Height/with signal tower: 665/870 mm Depth: 530 mm Width: 420 mm Capacity: 850m3/h (500 cfm) Weight: 40 kg (88lbs) Power supply: 115 - 230 V VAT is shown Delivery EXW

ATMSolutions ATMS 2030 150W laser cutting machine was built in 2018 in Poland. Distinguished by state-of-the-art solutions and components, the machine is used for precision cutting and engraving of a wide range of materials, i.e. rubber, wood and leather. Its deformation-resistant design with a large, 3000 mm long and 2000 mm wide through-table makes it possible to achieve high working speeds while maintaining maximum stability. Axis movement is performed by a top-of-the-range drive system consisting of linear guides with ground tracks and linear carriages, which ensures the highest positioning accuracy. The professional LaserWork control software for operating the machine supports the most important file formats and works directly with the most popular graphics programs (CorelDraw, AutoCAD, etc.). The CO2 laser ATMS 2030 is offered with a wide range of equipment, including, among others ...

Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/К140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

Complete the accessory package for your extraction / extraction system Hoses, sockets, flex arm and suction nozzle have always been part of our standard range. From now on we complete this package with the hose feedthrough Available now: Hose feedthrough machine wall for suction Dimensions: 150 x 150 mm Ø 76 nozzles on both sides Article-No. MA-201150

Central extraction system for soldering stations and welding workplaces make KEMPER type 91890Fabr. -No: 300374-03 built in 1998for 3 - 7 jobs,The material liquefied during the soldering process releases smoke, gases and aerosols, which must be sucked off. The Kemper extraction system was specially designed for use at soldering stations. He sucks the substances punctiform.Filtering in 3 stages: pre-filter, suspended particle filter,: Activated Carbon FilterFlow rate: 700 m3 / hMax. stat. Pressing: 1600 PaConnection voltage: 380VRated current: 2.5 AMotor power: 1,1 kWDuty cycle: 100% EDWith:- Control panel and electronic filter monitoring- Monitoring the activated carbon filter by means of LED chainused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We  ...

Welding extraction table make HEBEC type STV 2Fabr. -No: 4105 built in 1970Table size: 1000 x 800 mmMax. Air volume per hour: 2200 m³Speed: 1400 rpm.Table height: 820 mmElectricity requirement: 0.75 hpPower connection: 380 V / 50 HzOutside dimensions approx: 1200 x 950 x 820 mmWith- Extraction and emptied coarse dust containerusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Used Apag SRV20 rotary / vacuum filter. - 20m2 filtration area - Filter drum diameter 1721mm - Length of filter drum 3750 mm - Rotational speed of the filter drum 0-9 r.p.m. - Vacuum pump capacity 450m3 / h - Extraction pump capacity 36m3 / h - Feed pump capacity 36m3 / h - Air consumption 1 Nm3 / h - Water consumption by a 1 m3 / h vacuum pump - Washing water intake 50-80 1 / m3 - 2.2 kW filter drum power consumption - Power consumption of the cutting knife cutting 0.18kW - Power consumption of the 11kW vacuum pump - 2.2kW feed pump power consumption - 3kW extraction pump power consumption - 1.1 kW coadiuvante mixer power consumption - Acid resistant design. - Weight 4300 kg. - Year of construction 2002. - Manufacturer's documentation.

Welding fume extraction make RUWAC type SF 92Machine -No: SF940027Technical specifications:Extraction capacity approx.: 760 cbm / hDrive power: 4.0 kWWeight about: 102 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding fume extraction make KEMPER type 91510Manufacture -No: 923610Technical specifications:Flow rate: 1200 cbm/hstat. Pressure: 1450 PaTotal power requirement: 0.75 kWelectrical connection: 380 VWeight approx.: 60 kgSuction nozzle diameter :150 mmExternal dimensions with suction arm approx.: 650 x 700 x 1200 mmwith- 1 extraction arm- mobileused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

working hours machine: 59,000 h (stand 11-21) working hours laser: 20,000 h (stand 11-21) working range X x Y x Z: 3048 x 1524 x 170 mm laser laser type: Raycus Fiber RFL-C 3000 S (single module) laser capacity CW: 3000 Watt laser range capacity: 300 - 3000 Watt cutting head: Raytools with auto-focus Machine CNC-control: CNC Bystronic Byvision cooling unit: S&A CWFL-3000 ANS dust extraction: Donaldson Torit DCE – DFPRO 6 electrian capacity total: approx. 37 KW machine + 5 KW dust extraction space needs approx.: 12,900 x 4,000 x 2,350 mm total weight approx.: approx. 13,000 KG cutable materials and thicknesses mild steel ( EN 10027-1 S 235JR+AR or rec. Raex quality) 25 mm inox ( EN 10027-2 1.4301 (X5CrNi18-10 ) 20 mm aluminum (e.B. 3.3535 AlMg3 ) 12 mm brass 10 mm machine description standard options: • cutting machine with operator safety advice ...

Storti PS 430 medium-size wood cutting line - Italian production - max length of wood 6000 mm - minimum length of wood 2000 mm - wood diameter min / max 100 / 350 mm TECHNICAL PARAMETERS: 1. CUTTING THE PRISM PGS 2004 circular saw Minimum log length 1000 mm. Maximum log length 6000 mm. Maximum log diameter 350 mm. Minimum log diameter 100 mm. Maximum ground clearance 400 mm. Disc diameter 600 mm. Saw hole diameter 40 mm. Saw blade speed 2000/2500 RPM Feed speed 4-35 m/1 min. Spindle motor power 2X37 2X44 KW The opening and closing power of the saw blades is 0.75 KW Log feeding power 4 KW Number of programmable memories for cutting sizes - 9 TGS 84 V double crosscut saw Maximum board width 350 mm. Minimum board width 100 mm. Minimum board height 40 mm. Maximum board height 200 mm. Feeding engine power 0.75 KW Feeding speed 42 m/1 min. Minimum cutting leng ...

machine measurements: 3200x1700x2100 mm machine weight: -- kg power capacity: -- kW Condition: used Specification: Ultrasonic cleaning system type: Fisa 3VSD 150D - ultrasonic cleaning system consisting of: (see description) 1. tub 1 - cleaning agent 2. tub 2 - tap water 3. tub 3 - preservative 4. cleaning area 5. control - Cleaning cycle in tub 1 approx. 10-20 minutes - Operating temperature between 70-75°C - Extraction ON during cleaning process (Extraction fans are not are not included in the scope of delivery. - Cleaning with water in tub 2 - Cycle time in tub 2 approx. 10-20 minutes - Preservation in tub 3 - Preservation cycle time in tub 3 approx. 10 minutes - Blowing off the parts in the cleaning area under suction - incl. two cleaning baskets - The motors for the suction system in tub 1 and in the cleaning area are not included in the scope of delivery.  ...

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) CCD camera and monitor Dividing head Sk 40 with dividing disk 24 R 1 dividing disk each 14, 16, 18 Tightening screw M 16 Counter bearing complete with 4 center punch points Center point Sk 40 with driver Twist-u. Relief grinding device with rac ...

Description Tria granulator complete with blower for material extraction and dust cyclone Feeding Mouth Diameter: 470 x 435 mm Cutting Chamber Diameter: 470 x 250 mm Motor Power: 7.5 Kw Rotating blades: 6 Fixed blades: 2 Grid Hole Size: 9 mm Material Extraction: By Blower NEW BLADES

ECKERT AGAT SPEED plasma-gas cutting machine was built in 2011 in Poland. The machine is used for precise cutting of pre-programmed elements in metal sheets with a maximum thickness of 45 mm (plasma cutting) or 100 mm (oxygen cutting). The main feature of the plasma cutting machine is its open structure, made of high-quality welded steel, allowing easy loading and unloading of the workpiece on the work table from either side. To increase the comfort of the machine operator, an extraction table has been installed to eliminate the contamination generated during the cutting process. The high speed of feeds, reaching up to 10000 mm/min, guarantees a significant reduction in machining time. The plasma cutting machine is also equipped with a modern ECS 872 CNC controller and a control panel, as well as a reliable KJELLBERG PA-S45 W plasma source ensuring the highest quality and precision ...

Description POWER SUPPLY: 550 x 540 mm GRANULATION ROOM: 160 x 100 mm ENGINE POWER: 1.5 kW ROLLING LAMPS: 2 FIXED LAMPS: 2 GRAY HOLES: 5 mm PRODUCTION: / MATERIAL EXTRACTION: material extraction with drop in drawer Granulator with forced feed through auger, screw power 0.75 kW

ECKERT JANTAR plasma cutting machine was manufactured in 2017 in Poland. Characterised by a robust and stable construction, the machine is designed for cutting shapes in workpieces made of mild steel, stainless steel or aluminium. For precise machining of sheets having a maximum thickness of 38 mm (mild steel) or 25 mm (stainless steel and aluminium), it uses a plasma torch equipped with an HD3000 support with distance adjustment by measuring the plasma arc voltage. The process of cutting workpieces is carried out on a working area measuring 2000 mm in length and 3000 mm in width, equipped with an extraction table eliminating the impurities generated during processing. The plasma cutting machine is offered with a wide range of equipment, including: modern CNC controller ECS 872 for full control over the operation of the machine, and a HYPERTHERM HPR130XD plasma source. Technical da ...

Description POWER SUPPLY: 370 x 300 mm GRANULATION ROOM: 250 x 270 mm ENGINE POWER: 14 kW ROLLING LAMPS: 3 FIXED LAMPS: 2 GRAY HOLES: 6 mm PRODUCTION: / MATERIAL EXTRACTION: material extraction via blower, blower 0.75 kW Granulator with forced feed through auger

Description POWER SUPPLY: 712x410 GRANULATION ROOM: 710x430 ENGINE POWER: 22 kW ROLLING LAMPS: 3 + 3 FIXED LAMPS: 2 + 2 GRAY HOLES: 3 mm PRODUCTION: 490 kg / h (with 8 mm grid) MATERIAL EXTRACTION: Extraction of material by fall with predisposition for side aspirator

Description Feeding mouth size: 420 mm x 160 mm Cutting Chamber Size: 430 mm x 180 mm Engine power: 1.5 Kw Rotating Blades: 3 Fixed blades: 2 Grid Hole Size: 5 mm Approximate production: 20 - 400 Kg/h Material Extraction: Drawer with extraction hole Machine never used, in like new condition

Description Feeding mouth size: 420 x 160 mm Cutting chamber size: 430 x 180 mm Engine power: 1.5 Kw Rotating Blades: 3 Fixed blades: 2 Grid Hole Size: 5 mm Production: 20-400 Kg/h Material extraction: drawer with extraction hole Machine never used, in like new condition

- very good condition - year of manufacture 1993 - Heesemann electronic PLC control - model / type LSM 6 TECHNICAL PARAMETERS: working width of grinding 1350 mm thickness max. ground elements 150 mm MACHINE CONFIGURATION: I- cross-cross aggregate with sequential electronic pressure main engine 13 KW pneumatic oscillation of the photocell extraction output 1 x 180 mm grinding belt size 5480 x 150 mm II- combo unit with boot main engine 13 KW grinding belt cleaning system with oscillation shoe with pneumatic clamp pneumatic oscillation of the photocell extraction output fi.1 x 180 mm grinding belt size 2620 x 1350 mm PNEUMATIC OSCILLATION OF THE PHOTOCELL pneumatic strip system with oscillation cleaning tapes III- combo unit with boot main engine 13 KW grinding belt cleaning system shoe with pneumatic clamp output to the extractor fi. 1 ...

Automatic sugar coating machine Brand: Narong Industries Model: Rama NR Cota 19 series 5 DRUM DIAMETER: 19 / 48 cm CAPACITY: 3 to 7 kg Blowing / Extraction / Rotation Option - Heating - Speed variation - Extraction temperature measurement - Supply air temperature measurement - Spray pressure measurement - Light: interior lighting Research and development / Pilot unit

Mobile extraction for welding fumes, welding fume extraction Manufacturer Kemper Filter Master Type 64103 Year of construction 2005 Supply voltage 400V Volume flow 1,200 m³/h max.stat. Pressure 1.350 Pa Weight approx. 100kg

Extraction system from a tool grinding machine Vollmer. With the extraction system, hot or glowing chips can be extracted from grinding machines, e.g. from surface grinding machines Elb or from e.g. tool grinding machine Saake or Deckel and others. Power supply 400Volt. The machine is equipped with a chip drawer and sucks through a pocket filter which can be cleaned by means of a crank and vibration. Special price

Suction nozzle diameter: 200 mm / 2 x 100 mm; Nominal flow rate: 2000 m³/h; Spahnsack volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.5 kW; Machine height: 1000 x 500 x 2100 mm (L x W x H); Weight: 39 kg; The powerful and mobile extraction unit FT 200 N improves the performance of your woodworking machines and helps you to keep the workplace free of chips and dust. During continuous operation, the powerful drive motor ensures a constant extraction performance High ease of use thanks to the quick-change system of the chip bags Scratch-resistant surface thanks to high-quality powder coating Steel fan impeller insensitive to the suction of small pieces of wood Modern design and optimal price-performance ratio filter bag chip bag driving device

1 dedusting with ring ionization with the option of installing the system on an existing transport. Cleaning perpendicular to the direction of flow of the automatic spray gun. With integrated electro-mechanical linear drive. 2 compressed air-operated, rotating blow nozzles move in an oscillating manner across the direction of the workpieces. The dedusting is provided with two side exhaust hoods through which the dust-free air is removed from the workpieces. 1 ring ionization for the elimination of static charges on the workpiece surfaces, attached to the oscillating / rotating Nozzle holder, including high-voltage power pack (not in EX) with voltage display and connection cable between ionizing bar and power pack The dust extraction system must be connected to a dust extraction system, min. 5,000 sqm / h. - Producer Venjakob - Year of construction 2009 - Working width 1300 mm - Feed sp ...

working area: 3000x1500 mm : 20 mm : 15 mm : 10 mm max. workpiece weight: 900 kg : 4000 W Machine comes WITHOUT LIFTMASTER! Standard equipment Machine: - Closed machine frame with integrated laser unit - Motion unit for high-precision machining - Torque drive in combination with linear direct drives - Closed beam guidance - Single cutting head strategy - Cooling unit - Automatic pallet changer in longitudinal direction - 19 touch colour screen - Longitudinal conveyor belt - Work area lighting - Position laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine Cutting head: - Lens cutting head with 250mm focal length - Universal quick-change device (UTI) - LensLine with condition check - ControlLine: Height control and sheet outer edge detection - Lens with RFID chip Control system: - SINUMERIK 840D SL control system - Simple workshop programming - Fast post-product ...

width of the strips: 150 mm band length: 2000 mm band speed: 30,0 mm/sek grinding width: 500 Plantisch mm suction capacity: 630 m³/h total power requirement: 3,75 kW weight of the machine ca.: 100 kg range L-W-H: 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible ex ...

Suction nozzle diameter: 260mm; Nominal flow rate: 7700 m³/h; Bag volume: 2 x 290 l; Filter cleaning: manual; Engine power: 4.8 kW; Dimensions: 1900 x 670 x 2800 mm (L x W x H); Weight: 88 kg; For milling, planing and sawdust (not suitable for dust) 180Â rotatable extraction unit allows extraction from below or above Stable fan wheel made of metal Standard with high-quality chassis for better stability and easy manoeuvring quick-release locks for filter and chip bag fine filter bag double-woven

Suction nozzle diameter: 200 mm / 2 x 100 mm; Nominal flow rate: 1900 m³/h; Spahnsack volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.5 kW; Machine height: 1000 x 500 x 2100 mm (L x W x H); Weight: 39 kg; For milling, planing and sawdust (not suitable for dust) 180Â rotatable extraction unit allows extraction from below or above Stable fan wheel made of metal Standard with high-quality chassis for better stability and easy manoeuvring quick-release fasteners for filter and chip bag fine filter bag double-woven

ECKERT JANTAR 2 plasma cutting machine was manufactured in 2008 in Poland. The machine equipped with a large working table of 12500 x 2500 mm (length x width) is designed for cutting oversized metal sheets made of carbon and low-alloy steel of maximum thickness of 25 mm (plasma cutting) or 110 mm (oxygen cutting). The torches are powered by a highly efficient HYPERTHERM HPR260 plasma source with a power of 260 A, guaranteeing excellent precision and many years of trouble-free operation. The ECKERT JANTAR 2 12.5×2.5 m plasma-gas cutting machine ensures a high level of safety. A KEMPER filtration system with self-cleaning filters and an extraction table eliminate contamination generated during workpiece machining. The plasma cutting machine is numerically controlled by an ECS 859 controller with all the necessary functions for efficient use of the machine. Technical parameters of th ...

STIGAL DYNAMIC SPEED HQ plasma cutting machine manufactured in 2012, precisely cuts workpieces made of plain steel, stainless steel and aluminium on a large work table with dimensions (L x W) of 4000 x 2000 mm (the table grate will be replaced with a new one before sale). The numerically-controlled plasma cutting machine ensures a high degree of operational safety, as the machine is equipped with an extraction table designed to eliminate the contamination generated during cutting. The plasma cutting machine is also equipped with a reliable CEBORA PROF 165 HQC plasma source and GudePol GO-R refrigeration dryer. Technical data of the plasma cutting machine STIGAL DYNAMIC SPEED HQ - work table surface (L x W): 4000 x 2000 mm - cutting length: 4000 mm - cutting width: 2000 mm - maximum sheet thickness: 20 mm - plasma source power: 120 A - power consumption: 7000 W - DYNAMIC SPEED H ...

Edges and facets grinding machine. Grinding angle: 45 degrees. Support table area: 100 x 320 mm Power supply: 380 Vol, 16 Amp. Incl. substructure with dust extraction, the extraction hose is unfortunately missing., 2 pieces of new compartments - sanding pad, diameter: 165 mm. Working height: approx. 105 cm. Weight: approx. 80 kg. Good operational condition. The machine can be inspected and demonstrated under power by arrangement and is immediately available.

mobile welding smoke filter, welding smoke extraction, soldering smoke extraction -Drive: 1.6 kW -Connection: 220 V 50 Hz -Weight: 46 kg

EAGLE eVision 1530 F3.0 AF fiber laser was manufactured in 2012 in Poland. The machine used in the cutting process of workpieces made of structural steel, stainless steel, aluminium and copper, guarantees the user excellent dimensional and shape precision during the cutting process. The low cutting edge and small heat-affected zone ensure that the geometry of the workpiece does not change during processing at the edges of the material. The EAGLE fibre laser uses the energy-efficient and trouble-free IPG YLS-3000 laser source to supply the PRECITEC cutting head with a high-quality 3 kW laser beam. The cutting head is equipped with overload and collision protection, which automatically shuts down all machine axis drives if a collision with the workpiece is detected. Thanks to the special head positioning system (HRS), a constant distance is maintained between the head and the sheet meta ...

grinding length: 5200 mm grinding width: 1300 mm workpiece height: 320 mm Control: Siemens 840 D main drive: 306 kW total power requirement: 380 kW weight of the machine ca.: t dimensions of the machine ca.: 11,21 x 3,2 x 3,85 m CNC production surface grinding machine with segment head Grinding length 5200 mm Grinding width 1300 mm Workpiece height 320 mm Control Siemens 840 D Passage width 1300 mm Grinding height 320 mm Grinding motor 306 kW Grinding motor speeds up to 320 rpm Grinding motor feed, infinitely variable 0.5-35 m/min Grinding motor infeed in steps of 0.002-1 mm Grinding motor infeed continuously stepless upto 5 mm/min Space requirement approx. 11.21 x 3.2 x 3.85 m Including accessories. - Coolant system - Magnetic clamping device - Switch cabinet - Oil mist extraction - Documentation Dimensions (length x width x height): Bed: 11200 x 2400 x 1600 mm, weight 28000 kg Grindin ...

TRUMPF TruLaser 3030 fiber laser built in Germany in 2013, is used for precision machining of workpieces made of structural steel, stainless steel, as well as brass and copper, thanks to special technology data packages equipped in the machine. The extremely efficient and reliable fibre-cutting technology expands the machining possibilities and allows to achieve very smooth and even edges. The laser cutting machine features a robust, durable design that prevents any vibrations from occurring during changes in direction. The enclosed laser body with lift-up roof and fixed guards effectively protect the operator during work. The axes are driven by a direct Torque drive (X-axis) and direct linear drives (Y-axis and Z-axis), which, combined with hardened guideways of the highest manufacture precision, ensure that high accelerations and working speeds are achieved. Generated by the reli ...

KIMLA POWERCUT LF 1530 4 kW fiber laser for tubes and sheet metal was built in 2021. The reliable machine, built on a rigid monolithic body, uses advanced fibre technology to cut workpieces with a maximum weight of 900 kg. The 4 kW high-quality fibre optic beam fed directly to the cutting head expands the machining possibilities and guarantees the user very smooth and even edges. The high-quality steel work table with precise mechanical locking stiffens the pallet during cutting, ensuring that the workpiece remains stationary and secure while cutting in the X, Y and Z axes. In order to ensure that the cutting process is uninterrupted, the KIMLA laser cutting machine is also equipped with an automatic pallet changing system which allows workpieces to be loaded and unloaded at the same time, without interrupting the production process. The POWERCUT LF 1530 fibre laser cutting machine ...

volume capacity: 2000 m3/h feed volume: 99,5 % compressed air: 4,0 - 6,0 bar voltage: 380 V motor: 3,0 KW weight: ca. 185 kg The KEMPER mobile cartridge filter is designed for the extraction of pollutants that arise during the various electric welding processes. In principle, the device can be used in all work processes in which particulate pollutants, i.e. smoke and dust, are released. However, you should make sure that no rain of sparks (e.g. from a grinding process) is sucked into the filter device. Furnishing : - Mobile welding fume extraction or mobile cartridge filter - Suction without suction hose - User manual + wiring diagram (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9451130 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Special price Trotec Speedy 100 Co2 Laser 30 Watt air-cooled Year of construction: 2014 Laser is immediately ready for use 4194 Hours of operation Immediately ready for use • Extraction has new filters Scope of delivery: • Trotec Laser Speedy 100 • Trotec extraction Atmos Compact year 2018 •Connecting cable • JobControl 11.4 software incl. license key •Manuals • Lens set • Lens cleaner • Lentil cloths • Allen key set On request: • Training and commissioning • Unwinding device for round engraving • Honeycomb table •Delivery Properties: Machining area: 610 x 305 mm Max. workpiece height: 132 mm Advantages of Speedy Laser Engraving Machine Fastest laser engraving machine on the market Built for productivity Time is money - the time per laser job is crucial for your business success. Original price of the system appro ...

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drill ...

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - wood - aluminum - bronze - GRP (glass fiber reinforced plastics) - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind hole ...

Year of manufacture 2016 With over 40 years of experience, Polymac supplies extraction systems, in-mould labelling systems, handle machines and downstream automation for your pail and lid production. Extraction robot for large pails 10 - 20 litres

ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2014. Distinguished by its robust and stable construction, the machine ensures a high degree of safety, long-term trouble-free operation and excellent precision, even during the most intensive and demanding machining of e.g. steel or aluminium. The machine’s entire workspace with a length of 3000 mm and a width of 1500 mm is equipped with an extraction table, which effectively eliminates contaminants generated during machining and ensures comfortable working conditions. The JANTAR 2 plasma cutting machine is also equipped with, among others, a state-of-the-art CNC ECS 872 controller, an ECKERT filter fan and double-sided AC servo motors. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC controller: ECS 872 - work table dimensions (L x W): 3000 x 1500 mm - double-sided AC servo motors - plasma source:  ...

2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...

Washing basin: 3 x 1 m wide, stainless steel. With 2 blades: 0.37 Kw, bucket belt for material extraction, bottom auger for cleaning, sludge extraction auger 160 mm Ø diam x 3 m long. Total power: 3.75 hp. With electrical panel.