extraction used for sale

CATALOG NO. 6946 TECHNICAL SPECIFICATIONS - max width of the workpiece 210mm - max thickness of the workpiece 120mm - number of spindles 2 pcs - spindle diameter 50mm in advance: - 3 insertion, pulling, rubber, smooth shafts including 2 double - 2 leading, rubber, pulling shafts including 1 double - heads on supports - head adjustment up / down - electric height adjustment of the upper head - electrical setting of planing thickness - spindles equipped with a brake - main motor 2×5,5kW - smooth regulation of feed speed - feed motor 3kW - feed on cardan shafts - diameter of extraction connection 2x160mm - dimensions length / width / height 2350x1780x1950mm - weight 1882kg – German production – jointers – for sharpening knives on the head – 2 Hydro heads included – unpainted – very good condition, used planer Net price: 33900 PLN Net price: 7533 ...

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10,00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repainting - traffic grey / RAL hue. (On request, other RAL colours are also possible!) general: The price fo ...

CATALOG NO. 6911 TECHNICAL SPECIFICATIONS - track width 350mm - shaft width 370mm - max cutting height 200mm max dial diameter: - on the upper shaft 340mm - on the bottom shaft 300mm - disc bore diameter 80mm in advance: - repellers - 2 pressure sliding shafts -Pressure - shaft with saws 37kW - 2 smooth sliding shafts from below: - introductory table + guide strip - repellers -caterpillar - shaft with saws 37kW -caterpillar - 1 output shaft, slip, smooth - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the upper body up / down 1,1kW - automatic central lubrication - electrically adjustable smooth regulation of the feed speed 3kW - diameter of extraction connection 230mm, 250mm - dimensions length / width / height 3000x2300x1900mm - weight about 5000kg ADVANTAGES – Italian production – two-shaft – used multi-saw, very good condition Net price: 19890 ...

Catalogue number: 6746 TECHNICAL SPECIFICATIONS - track width 450mm - shaft width 550mm - disc bore diameter 80mm - min disc diameter 250mm - max disc diameter 400mm - max cutting height 250mm - max width of input material 900mm - min length of the workpiece 800mm in advance: - 2 rows of repellers - pulling shaft, toothed, pressure shaft - repellers - pulling shaft, toothed, pressure shaft - shaft with saws - pulling shaft, toothed, pressure shaft from below: - metal roller, slip - repellers -caterpillar - shaft with saws -caterpillar - smooth regulation of the feed speed on the inverter 0-40m / min - main motors 2x90kW - feed motor 7,5kW - electric body lift up / down 0,75kW - electric shaft adjustment with saws 2×0,75kW - central lubrication - diameter of extraction connection 330mm, 270mm - dimensions length / width / height 3150x2270x2560 ...

CATALOG NUMBER 6056 TECHNICAL DATA - max height of the processed material 250mm - working length of the spindle 260mm - 40mm spindle diameter - worktop length / width 630x360mm - guide - 9.3 kW engine - 2 material clamps - pneumatic - diameter of the extraction connector 2x120mm - air demand 8bar - dimensions length / width / height 1370x980x1620mm - weight 450 kg - unpainted - cutters included, 2 pcs - Italian production - used milling machine, very good condition Net price: PLN 22900 Net price: EUR 5264 Net price, calculated at the rate of 4.35 PLN / EUR (with larger exchange rate fluctuations, the price may change)

- Oil extraction unit KAISER, 100-400 l/min - Screening belt, belt width: 800 mm, length: 2,000 mm, SEW-Eurodrive 0.37 kW - Monopump NETZSCH NM045BT, YOC 2001, GETRIEBEBAU NORD Gear Motor - Rotor of progressing cavity pump - Peristaltic pump DEPA ELRO ME5 - Gate valve, length: 275 mm, Ø 200/80 mm (outside/inside) - Control cabinet - 2 x agitators - 2 x stainless steel pipe with branch (approx. 1 m long)

CATALOG NUMBER RE022 TECHNICAL DATA - saw blade tilt 0-46˚ - main engine power 6kW - 3000mm cutting length on the trolley - main spindle speed 3500/4500 rpm - 30mm spindle diameter - diameter of the main shield 300-400mm - max diameter of the scoring unit 125mm - power of the scoring unit 0.75 kW - rotational speed of the podcinak 8500 rpm - spindle diameter 20mm - cutting width at the guide 1280mm - sawing width with the use of bumpers on the auxiliary table 215-3200mm - cutting height for 300mm 90 ° / 45 ° 90 / 60mm - cutting height for 350mm 90 ° / 45 ° 5-115 / 3.5-80mm - cutting height for 400mm 90 ° / 45 ° 25-140 / 15.5-95mm - diameter of the extraction nozzle 80mm, 125mm - dimensions length / width / height 3300/3460 / 1500mm - weight 750 kg ADVANTAGES - new machine - DTR + CE documentation - warranty from the manufacturer - REMA - professional - ...

workpiece weight: 4 kg workpiece length: 200 mm dia. on complete length: 200 mm Control: Schenck-Lauer electrics - voltage/frequency: 400 / 50 V/Hz dimensions: 4,1 x 4,2 x 2,5 m connected load: 12 kVA flange diameter: 250 mm weight: 4,5 t Balancing machine for rotors - Turbocharger fuselage groups - hydraulic measuring station - Compensation station - Pulsation measuring table - Chip extraction - Measuring instrument CAB 950T - feeding device - Schenck/Lauer Control on Dase of Windows The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: - mm Motor output: 7,5 kW Spindle diameter: 40 mm reus: 6000 U/min Weight: 300 kg Year: 2018 Universal profiler Götzinger UP 1730 Machine for frontal and cross-side machining. Different application technology for wood products First-class surface quality of machined workpieces due to high speed, Particularly stable bearing of the milling shaft and through synchronous milling. Rapid tool change through one-sided mounted cutter shaft and through swiveling clamping device. The whole work process, such as clamping, pneumatic-hydraulic table feed with speed control (stepless) and fast reverse. By exchanging the milling segments and by changing the attachment points can be up to ten different with a single profile milling set Create profile companies. Technical specifications: Cutting depth max .: 30 mm Milling height max .: 150 mm Voltage cross section per stroke max. Softw ...

dimensions:: innen 1160 x 580 x 580 mm Air consumption: 400 - 800 l/min. air pressure: 3,4 - 8,0 bar workpiece weight: max. 120 kg total power requirement: 1,2 kW weight: 115 kg range L-W-H: 1225 x 935 x 1640 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc. - With gas pressure springs for quick and easy loading and unloading - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger The air flow is controlled by a foot pedal - Two fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film - Light switch with double function: suction and cabin lighting are switched on and off at the same time Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be  ...

Electrical connected load: 16.5 kW / 400 V / 50 Hz / 3 Ph Condition: well-kept, in working order Availability: as of now fully automatic loading trolley washing system Steam heated - 70 kg/h at 4 bar steam pressure Pump: HP centrifugal pump stainless steel - 17 bar Items to be cleaned: - Bigboxes 1000 x 700 x 700 - Bigboxes 1200 x 1000 x 800 mm Lid for small boxes Loading trolley 200 l Pump stainless steel pressure 17 bar incl. washing rack for lids of the paloxes 1000 x 700 x 700 mm incl. chemical dosing pump incl. extractor extraction length 8 m incl. steam mixing valve incl. additional nozzles for floor cleaning of the big boxes Sick sensors and Festo are used for the printing technology Motors over 0.75 kW IE3 standard

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm links capacity 45 degrees: round: 110 mm rechts capacity 45 degrees: square: 100 mm links capacity 45 degrees: square: 95 mm rechts capacity 45 degrees: flat: 135 x 60 mm dimensions of saw-blade: 350 x 32 turning speeds: 1700 / 3400 U/min capacity 45 degrees: round: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 210 kg dimensions of the machine ca.: 1170 x 860 x 1600 mm Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The  ...

width of the strips: 75 mm band length: 2000 mm band speed: 29,0 m/sek grinding width: 460 x 75 Plantisch mm Dust suction hood: 100 mm total power requirement: 3,0 kW 100% ED weight of the machine ca.: 66,0 kg range L-W-H: 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding a ...

dimensions:: innen 1160 x 870 x 850 mm Air consumption: 400 - 800 l/min. air pressure: 3,4 - 8,0 bar workpiece weight: max. 150 kg total power requirement: 1,2 kW weight: 160 kg range L-W-H: 1320 x 1200 x 1760 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc. - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger The air flow is controlled by a foot pedal - Four fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film - Switch for suction and cabin lighting Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Cross struts on the feet easy transport with the pallet truck - Container for blasting material - dust extraction - foot swi ...

Paint booth: Make : SAIMA Year of manufacture : 2018 Dimensions: 3.95 m x 7.21 m x 3.25 m (approx. WxLxH) Supply air blanket : Filter blanket Lamps : 23 pcs. LED downlights Entrance side : 4-leaf folding gate 3.8 m x 3.1 m (approx. WxH) Escape door : lateral, 0.9 x 2.1 m (approx. WxH) Rusting : none, due to sidewall extraction on both sides Heating unit : approx. 255 kW, gas surface burner Drying temperature : 80 degrees C Supply unit : 33,000 m3/h; 11 kW Exhaust unit: 33,000 m3/h; 11 kW Pipelines : supply and exhaust air pipelines, deflector hood, etc. Electrics : Electrical cabinet Location : Münche area Selling price : € 16.990,- net ex site without dismantling

through-put width: 820 mm working heigth: 810 mm Air consumption: 680 l/min. air pressure: 8,6 bar weight: 160 kg : 148 Liter 0: Arm Loch 180 mm air clutch: 3/8 Zoll Furnishing: - Working space: 1110 x 820 x 810 mm LxWxH - very stable construction - Jet head (grain size 0.149 - 0.250 mm can be used) - Container for blasting material - dust extraction - foot switch - Lighting in the work area - Operating instructions in German - Transport dimensions / packed: 1350 x 1000 x 1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 29,0 m/sek grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 4,0 kW 100% ED weight of the machine ca.: 84,0 kg range L-W-H: 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding ...

pressure: 100 t distance between columns: 1000 mm stroke: 150 mm distance table/ram: 500 mm table surface area: 1000 x 700 mm die cushion stroke: 180 mm ram surface: 1000 x 700 mm ram drills x depth: 50 mm no. of strokes: 85 Hub/min tool shank hole (depth x diameter): 85 x 50 mm clamping slots: 22 DIN 650 form: diagonal number of clamping slots: 2 sheet width: 400 mm plate length: 1000 mm dimensions of the machine ca.: 3,0 x 3,0 x 3,0 m weight of the machine ca.: 8 t total power requirement: 30,2 kW - fine adjustment of stroke - cutting impact damping - oil extraction - 2 cylinders - roller feed, make Dreher, type WAV, control PMS3000 - soundproof cabin - machine was overhauled in 2001 and with new control SIEMENS SIMA-TIC OP17 equipped The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High-performance deburring system for internal and external deburring of profiles and tubes in a single operation (approx. 3 sec.) Powerful industrial geared three-phase motor, frequency-controlled, for infinitely variable settings of the required speed: 600 - 2,700 1/min, for deburring pipes and profiles with material dimensions horizontal/vertical 120 mm, Easily adjustable work table height (adjustable and lockable) for the appropriate material size adjustable, lockable infeed (carriage) of the deburring brushes to the work table by means of a handwheel with locking function. Drawer for dust residues. Sheet steel housing with prepared for connection to an external extraction system. Housing hoods foldable for changing the brushes. Machine body RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm corrugated st ...

Dimensions 6.000 x 3.000 mm Constructed in 2013 Moving paddled drums diam. 750 mm Staircase Discharging screw on bottom Combs for floating material We can add extraction drained screw on request

through-put width: 580 mm working heigth: 615 mm discs: 570 x 260 mm Air consumption: 400 l/min. air pressure: 2,7 - 5,5 bar weight: 125 kg Box Width: 1200 mm Furnishing: - Working space: 1220 x 615 x 580 mm LxWxH - Jet head (grain size 0.149 - 0.250 mm can be used) - Container for blasting material - dust extraction - foot switch - Lighting in the work area - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trotec Speedy 400 Co2 Laser 80 Watt air-cooled Year of construction: June 2015 • Immediately ready for use • 6 months warranty on all machines Working area: 1,016 x 610 mm Max. workpiece height: 305 mm • Only 2853 operating hours Scope of delivery: • Trotec Laser Speedy 400 year 2015 • Software JobControl 11.4 / Ruby incl. license key •Connecting cable • Aluminum lattice table • Lens cleaner • Lentil cloths • Allen key set • Lens set •Manuals On request: • Unwinding device • Trotec extraction • Slat table • Engraving table • Honeycomb grid table • Training and commissioning • Delivery by transport company Dimensions: width/depth/height (approx.) 1400 x 950 x 1070 mm Air support: By using an air compressor heat and gases are removed from the cutting surface blown away, resulting in a better cutting result can ...

Receiver capacity: 80 l working pressure: 4 - 8 bar Air consumption: 250 - 800 l/min. weight of the machine ca.: 36 Kg : 1020 x 460 x 520 mm Mobile jet unit with extraction Consisting of: microfilter Boiler 80 liters Blasting gun with 2.5m supply hose The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 450 mm z-travel: 300 mm CNC-control: Roeders RMS6 table-size: 700 x 550 mm max. table load: 800 kg spindle taper ISO: spindle turning speed range: 42.000 U/min feed stepless: 0 - 30.000 mm/min rapid traverse: 30 m/min drive capacity - spindle motor: 14 kW tool change unit: Pick-up 18 Pos. voltage: 400 V total power requirement: 20 kVA weight of the machine ca.: 5,2 t dimensions of the machine ca.: 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Catalogue number 4339 - replaceable spindle - spindle adjustable up/down hydraulically and pneumatically - milling apparatus adjustable at an angle - vertical spindle stroke 10cm - max distance from the table top to the spindle 18cm - table top dimensions 90x76cm - dimensions of the table top with extension and extension 159x117cm - cast iron worktop - top adjustable up / down - 4kW motor - 2 types of spindle speed 10000, 20000 rpm - with feed - smooth regulation of feed speed - diameter of the extraction connection 8cm Dimensions: - length 159cm - width 198cm - height 170cm - weight 975kg - used milling machine - very good condition - unpainted Net price: 5500 PLN Net price: 1183 EUR Net price calculated according to the exchange rate of 4,65 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Receiver capacity: 40 l working pressure: 4 - 8 bar Air consumption: 250 - 800 l/min. weight of the machine ca.: 20 Kg : 770 x 415 x 365 mm Mobile jet unit with extraction Consisting of: microfilter Boiler 40 liters Blasting gun with 2.5m supply hose The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The container has two saddle feet, a manhole DN 600 with dome lid, is used and emptied inside and professionally cleaned. Dimensions: D = 2.50 m - L = approx. 10.70 m On request, the container can be completely equipped with an extinguishing water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - consisting of: - 1 suction line DN 125 with A-fixed coupling according to DIN 14319 with special closure for fire brigade tricant keys incl. a ball valve 4", - 1 pcs. sleeve incl. ball valve welded into the highest point of the suction line (for ventilation of the suction line), - 1 pc anti-vortex plate mounted on suction line, - 1 pc sign "Extinguishing water extraction point", - 1 pc vent pipe DN100 with hood, - 1 pc bearing tube with dipstick for measuring the level, - 1 pc dome lid with screws an ...

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 170 mm Wheel diameter: 350 mm Technical data Table length: 275 mm Table width: 110 mm Grinding height: 170 mm Execution: hydraulic Diameter of grinding wheel: 350 mm Width of the grinding wheel: 12 mm Voltage 50 Hz 3x: 380 Volt Various accessories: Magnetic plate: Length: 240 mm Width: 125 mm Dust extraction

HORIZON BQ 280 YEAR: 2013 COUNTER: APPROX. 700.000 – 1 CLAMP PERFECT BINDER - CLAMPS: 1 - SPINE GLUING: PURE - GLUE REFILL: BY PRE MELTER - SIGHT GLUING: HOTMELT - BOOK BLOCK THICKNESS: INTEGRATED MONITORING STATION (OUTSIDE THE CLAMP) - MILLING SECTION: WITH EXTRACTION - MILLING DEPTH: ADJUSTABLE - COVER FEEDER: SUCTION DRUM FEEDER WITH 4X SCORING - TECHNOLOGY: TOUCH & WORK - SAVEABLE JOBS: 200 MEMORIES FOR REPEAT ORDERS - SHEET SIZE: MAX: 385 X 320 MM; MIN: 135 X 105 MM - COVER SIZE: MAX. 660 X 385MM; MIN. 240 X 135MM - BOOK THICKNESS: MAX. 50MM; MIN. 1MM - COVER WEIGHT RANGE: 90 - 300 G/SQM - COVER PILE HIGHT: MAX. 70MM - SPEED: MAX. 500 CYCLES/H - DIMENSIONS: 3,055 X 905 X 1,520MM - POWER: 400V/ 50HZ - 2,7KW - WEIGHT: 900KG

The container can be used as a water tank, extinguishing water tank, extinguishing water tank, extinguishing water retention tank, rain retention tank, retention tank, retention tank, rainwater retention, rain storage tank, retention ecister, cistern, etc. Dimensions: D = 2.50 m - L = approx. 8.70 m The container has two saddle feet, a manhole DN 600 with dome lid, is used and emptied inside and professionally cleaned. On request, the container can be completely equipped with an extinguishing water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - consisting of: - 1 suction line DN 125 with A-fixed coupling according to DIN 14319 with special closure for fire brigade tricant keys incl. a ball valve 4", - 1 pcs. sleeve incl. ball valve welded into the highest point of the suction line (for ven ...

We offer an extraction system from NESTRO Lufttechnik GmbH. The machine is from 1996, but is currently no longer used. Due to the age-appropriate condition, we recommend a prior inspection of the facility. The system is offered - due to a new purchase from our customer. Particulars: - Manufacturer: NESTRO Lufttechnik GmbH, Hainkirchen - Model: SFN 24C - Year of construction: 1996 - Machine No.:343676/002-98 - Filter area: 240m3 The machine is still in our customer's factory near Leipzig. The sale takes place ex works EXW (loading possibility available). We sell the assets on behalf of our customers. The offer prices are gross prices in EURO ex works. The offers are subject to change, subject to error and subject to any prior sale. In this context, we expressly refer to our terms and conditions. We would also like to point out that we expressly exclude a return, a guarant ...

Vertical tank made of stainless steel with an approximate capacity of 100 liters. Removable klopper type top bottom. With handles for extraction, with pressure gauge. In the body there are 2 electric resistors to heat the product, and 3 threaded connections (male) Conical bottom with discharge from the bottom. The discharge is blind to be able to empty the tank with the submersible pump that is inside it. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters approx Background type Conical Envelope 4 legs Outer diameter body 500 mm Body height 450 mm Body height + backgrounds (TOTAL: 1100 mm)

Emulsifier tank made of stainless steel with a volume of 900 liters. Top bottom klopper with man's mouth, agitation, breathing and two inputs with NW type thread. Body with breakers. Bottom klopper with discharge from the bottom. On 3 legs welded to the body with wheels. It has a pump for recirculation, extraction or feeding. General characteristics: Maker ADAIBRA Material Stainless steel

grinding length: 400 mm grinding width: 150 mm workpiece height: 300 mm turning speed range - stepless: max. 2800 U/min work table:: 400 x 150 max. dist. between floorpl. and spindle-nose: 350 mm grinding wheel size: 200 mm feed: Tisch 2,0 - 20,0 m/min voltage: 380 V total power requirement: 2,6 kW weight of the machine ca.: 900 kg range L-W-H: 1300 x 1200 x 1500 mm Furnishing: - compact surface grinding machine - K. JUNG magnetic clamping plate S1 10/25 - Lots of spare grinding wheels - side control panel - K. JUNG sanding dust extraction - additional vice The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Spanien : 174900 € : 4000x2000 mm : 37 kW : Max. Materialstärken : 200 mm : 150 mm : 120 mm : 100 mm : 150 mm : 1 : 4000 mm : 2000 mm : 200 mm : 60 m/min : 20 m/min : +/- 0,05 mm/m : +/- 0,025 mm/m : 6,4 m3 : 790 kg/m2 : 37 kW / 50 PS : 4.100 bar : 4,1 l/min THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT o ...

: neu : ca. 14 - 16 Wochen ab Auf : Spanien : 217800 € : 4000x2000 mm : 37 kW : bei Wasserstrahl : 200 mm : 150 mm : 120 mm : 100 mm : 150 mm : 1 : 4000 mm : 2000 mm : 200 mm : 60 m/min : 20 m/min : +/- 0,05 mm/m : +/- 0,025 mm/m : 6,4 m3 : 790 kg/m2 : 37 kW / 50 PS : 4136 bar : 4,1 l/min THE TCI CUTTING BP-C 4020-1 MACHINE INCLUDES THE FOLLOWING ELEMENTS: •Structure of the machine that includes the cutting table and a bridge with a cutting head for abrasive and pure water cutting. •Complete numeric control unit TCICNC 4.0, installed in a high-quality control cabinet with a new generation multi touch screen. •Automatic abrasive feeder with 200L capacity. TCI ABRALINE 1.0 •Automatic abrasive quantity regulator, independent for each cutting head, controlled from the design software. TCI ABRASIVE 3.0 •Abrasive backstop system TCI CUT CONTROL 3.0 •High pressure pump KMT oem50 H ...

Large capacity mixer. Its condition is of occasion equipment completely revised and reconstructed, in its entirety (re-release) guaranteed. the mixer, mixer, vacuum massager of the Spanish manufacturer Sia, model AM-352-A. Characteristics: they consist of a cylindrical container and hemispherical bottom, inside which and in the middle of an intense vacuum, some blades rotate (in both directions, at will or automatic), which produce a double movement of the paste, in crossing and alternative overlap, which allows kneading, mixing and massaging all kinds of pastes, without pressure, without friction, Bruising or harmful heating, in addition to distributing perfectly and in a minimum of time, all the components of the mixture. These qualities stand out above all the kneaders-mixers-massagers on the market. On the other hand, and as a consequence of the depression created and the extracti ...

Blasting house with extraction floor for mineral abrasives (glass, ceramics, corundum, garnet sand and so on). Magnetic separator, cyclone, preparation, material bunker, abrasive refill, free jet pressure blower, filter system with cleaning. Lining of the walls with 4mm fabric rubber

Description Höcker Polytechnik TSV Chip Extraction

Number of sanding units: 8 st. sanding width: 150 mm Machine can be inspected during production! Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 -------------------------------------------------- ------------------- for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding profiled window latch - Finish and intermediate sanding machine with eight sanding blade aggregates, 2 surface units at the top (synchronism / counter-rotation) 2 surface units below (synchronism / counter-rotation) 4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating - linear guidance of all grinding units over Linear ball bearing sets on hardened shafts - Timed immersion of all in the opposite direction rotating grinding units directly above the incoming Workpiece edges to avoid looping through the Primer in the front edge area ...

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

table width: 6000 mm table length: 27000 mm burner heads: 5 cutting width: 4000 mm control: Vison T5 Vers. 4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC Gantry Flame Cutting Machine Incl. extraction Cutting range 24 x 4 m Total table size 27 x 6 m Marking unit 4 oxyacetylene burners (mixed gas) and a 3-phase unit (acetylene). The respective conversion kits to the standard version are still available. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 450 mm Table width: 180 mm Execution: hydraulic Max. distance from table to spindle-centreline: 400 mm Longitudinal travel (X-axis): 550 mm Transversal travel (y axis): 200 mm Table speeds: stepless from: 0.10 m/min up to: 30.0 m/min Automatic vertical feed: Diameter of grinding wheel: 200 mm Width of the grinding wheel: 25 mm Grinding wheel speeds: from: 2800 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 3.00 HP Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1600 mm Height: 1800 mm Various accessories: Coolant system Electrical magnetic chuck Length: 450 mm Width: 200 mm Wheel truieng attachment hydraulic Dust extraction Digital readout number of axis:: ELESTA (1 x trans.) Set of flanges

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: DGT Plus Technical data Table length: 1200 mm Table width: 400 mm Axial motion: Longitudinal travel (X-axis): 1340 mm Cross travel (z-axis): 530 mm vertical travel (Y-axis): 645 mm Grinding length: 1000 mm Grinding width: 660 mm Grinding height over table: 550 mm Grinding wheel: Diameter: 400 mm Width: 100 mm Bore: 127 mm Grinding wheel speeds: from: 1400 rpm Table speeds: stepless from: 1 m/min up to: 4 m/min Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 25 kW Total power required: 20 kVA Machine´s weight about: 6700 kg Overall dimensions machine: Length: 4500 mm Width: 2500 mm Height: 3500 mm Various accessories: Coolant system Paper filter facility Dust extraction Oil mist extractor: LOSMA Magnetic plate: Length: 1000 mm Width: 500 mm Wheel trueing attac ...

max. format 75 x 106 cm Year of construction 2016 5 printing units + coating unit (chamber squeegee) + extended delivery max. 18,000 sheets/h (idle) Prinect Press Center Prinect Inpress Control Prinect WallScreen Hycolor film dampening systems Inking unit temperature control Cooling unit CombiStar (water-cooled) Autoplate Pro - fully automatic plate change automatic washing facilities Preset Plus Attachment and Delivery Colour stirrer Paint mist extraction Dry Pollinator PowderStar AP 262 De-electrification system StaticStar CoatingStar paint supply unit UV Dryer Heidelberg DryStar iron-doped UV lamps 1 UV intermediate dryer Full flexibility for UV intermediate dryers 2 UV dryers in the display Air supply cabinet AirStar Pro (water-cooled) Totalizer read: approx. 20 million print Price on request. We deliver and install worldwide!

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN 530M Technical data Number of axis total: 5 Table length: 920 mm Table width: 380 mm Longitudinal travel (X-axis): 505 mm Transversal travel (y axis): 355 mm Vertical travel (z axis): 610 mm Table load max.: 250 kg Spindle speeds: stepless from: 50 rpm up to: 30000 rpm Tool changer: Tool magazine number of tools: 28 Spindle nose: HSK: E50 Feeds (X, Y, Z): 1 - 20000 mm/min Voltage 50 Hz 3x: 400 Volt Total power required: 22 kVA Machine´s weight about: 3750 kg Overall dimensions machine: Length: 2500 mm Width: 2000 mm Height: 2565 mm Various accessories: Dividing attachment 4th and 5th axis: ATS 160 Centre height: 160 mm Electronic hand held control 3D touch probe Renishaw: MP40 Laser tool setting system Se ...

Gallus R200 B02 10-color – Age: 2007  Manufacturer: Gallus Ferd. Rüesch AG Configuration:  10 x Letterpress Units  2x unwinder, 2 DW left, 3 DW left, 3 DW right, 2 DW left, K250  Year of construction: 2007 (extension 10 colours)  Rotastance 360° servo drive  Rotastanze 360° servo-drive (middle 6's block)  Rotor dryer servo-drive  IS UV system M25-8x1-R-HP-SLC, UCS 6  Chill-roller technology  2 Web Edge Controls  Softal corona system VS  Tecknek web cleaning  Sensotec register control system (LCD touch screen monitor)  K250 winder automatic Tech. Specifications: Colour: Gallus NCS blue  7 red blanket printing units left  3 units red blanket printing unit right  1 screen printing unit left  1 screen printing unit right  1 hot stamping unit incl. temperature control unit  All positions prepared for ...

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 275 mm Table width: 110 mm Max. distance from table to spindle-centreline: 170 mm Grinding wheel speeds: up to: 2800 rpm Diameter of grinding wheel: 175 mm Width of the grinding wheel: 13 mm Drilling cap. of grind.wheel: 32 mm Grinding spindle motor: 0.7 HP Machine´s weight about: 560 kg Overall dimensions machine: Length: 1300 mm Width: 1000 mm Height: 1700 mm Various accessories: Magnetic plate: Length: 240 mm Width: 125 mm Dust extraction

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 200 mm Table width: 110 mm Grinding height: 170 mm Execution: hydraulic Rapid traverse: Diameter of grinding wheel: 175 mm Width of the grinding wheel: 12 mm Voltage 50 Hz 3x: 380 Volt Various accessories: Magnetic plate: Length: 200 mm Width: 100 mm Dust extraction Lamp

GALLUS EM 510 C  - Manufacturer: Gallus  - Machine type: EM 510 C  - Printing process: UV flexo printing  - Year of manufacture: 2006  - Working width: 520 mm  - Number of stations: 3, of which 3 can be used as punching stations and 2 as printing stations  - Speed: 150 m/min Equipment:  - Unwind - 76 mm  - Unwind diameter: 1,200 mm  - Web tension control (Arsoma)  - splice table  - Side edge control (E&L)  - insetter  - Hot air drying at station 1  - UV drying GEW E2C at station 2 incl. water-cooled impression cylinder  - Cooling unit for water cooling  - Turning cross (replica, not original, fixed placement)  - Grid take-off - and matrix rewind/grid take-up  - Pulling station with cross cutting and integrated slitting station with 2 squeezing knives  - Single sheet delivery  - Edelmann h ...