We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,597 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
volume capacity: 1600 m3/h feed volume: 99,9 % length: 3.000 Absaugschlauch mm motor: 230 Volt motor: 1,1 KW weight: 80,0 kg range L-W-H: 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class W3 (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surchar ...
used
External extraction 0.37 KW 380 V 16 A 3 ports Length 40 cm Width 50 cm Height 84 cm
used
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 4DF 16 EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of manufacture : 1997 Voltage: 3x 400V Power : 15kW Frequency : 50Hz Capacity : Unknown Dimensions can be measured if necessary.
used
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum.
used
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of construction: 1995 Voltage : 660 V Power : 4 kW Frequency : 50Hz Capacity : Unknown
used
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: Unknown Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of manufacture: Unknown Voltage : Unknown Power : 18,5kW Frequency : 50Hz Capacity : 3.33 m³/s approx. 20.000m³/h The plants are all dismantled and stored on pallets
used
Made in Germany Electrostatic Suction capacity: max 1800 m³/h, Fan power free suction 2400 m³/h, Engine power: 0.75 kW, (Siemens), Dimensions: L 1,765 x W 670 x H 700 mm Weight: 130 kg, Operating voltage: 400 VAC, 50 Hz, Power consumption, 1.85 Va
used
Welding fume extraction LINCOLN NORWELD SP-3M Volumetric flow: 300 m3/h motor: 2.2 kW 380 V Dimensions: 1200 x 630 x 870 mm used, tested !
used
Absaugung PAGUS Motor 0,37 kW 220 V Fahrbar. used, tested ! Dimensions: 900 x 500 x 2400 mm
used
Welding fume extraction KEMPER 91710110 built: 1996 Operating hours: 12880 h Volumetric flow: 240 m3/h 1,1 kW 230 V Dimensions: 620 x 350 x 640 mm used, tested !
used
Chip extraction, industrial vacuum cleaner NILFISK GB 635 50 STB -U- with stainless steel container for chip extraction 380 V without hoses used, checked ! Dimensions: 1100 x 700 x 1000 mm
used
Welding fume extraction LINCOLN NORWELD DF-500 Volumetric flow: 500 m3/h System pressure: 1000 mm/Wg ( millimeter water column ) - approx. 0,0,098 bar Fan speed: 9200 rpm operating voltage: 380 V 3AC Power consumption: 5.5 kW Connection diameter ( inside / outside ): 2x Ø 27 / 32 mm, 1x Ø 70 / 75 mm Engine: ATB 132S 5,5 kW 380 V 3AC 50 Hz IP54 used, tested ! Dimensions: 1800 x 1200 x 970 mm
used
Spare parts set, control board and pressure gauge KÖTTREMANN Control board: 712325 00871 H4 ( 71232500871H4 ) Pressure gauge: HUBA CONTROL 604.90 0020 20 - 300 Pa (0.0002 - 0.003 bar) spare part for KÖTTERMANN laboratory extraction, among others! used, checked ! Dimensions(Control Board): 200 x 140 x 50 mm Dimensions(pressure gauge): 100 x 90 x 60 mm
used
Welding table with fume extraction ARMATURENWERK ZITTAU G-61/1 800 x 500 mm with fan Q 1600 m3/h 0,45 kW 220 / 380 V upper or/ and lower suction adjustable used, tested ! Dimensions: 870 x 900 x 1100 mm
used
Airflow: 2200m³/h 1.1KW Weight 125kg Year of construction: 2009
used
---------- Technical data ---------- Suction nozzle: 140 mm, nominal capacity: 1556 m³/h Sold as is, without technical inspection
used
---------- Technical data ---------- Suction nozzle: 140 mm, nominal capacity: 1556 m³/h Sold as is, without technical inspection
used
Chip extraction, filter extraction, bag filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg
used
Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW -Speed: 2895 rpm -Volume flow: 1060 m³/h -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg
used
centrifugal fan, dust extraction fan, fan, suction, dust blower -Manufacturer: Rippert, centrifugal fan in soundproof housing -Type: HL560/710-200 -Motor: 5 kW 1435 rpm -Volume flow: 12,000 m³/h -Inlet/Outlet connection: Ø 500 mm, see photos -Dimensions: 1945/1515/H2350 mm -Weight: 600 kg
used
Welding fume filter, welding fume extraction, flexible extraction arm, welding fume extraction -Handover in the actual condition as seen -Welding fume extraction: with articulated extraction arm -Extraction fan: Brook Crompton 0.75 kW -extraction arm: total length 3880mm -Inlet connection: Ø 170/160 mm, outlet Ø 150 mm -Number: 2x suction available -Price per piece -Transport dimension: 1900/800/H560 mm -Weight: approx. 67 kg/pc.
used
Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg
used
Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg
used
Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: Plymovent, flexible extraction arm type KUA-160/2 -Tube: Ø 160 mm -Hood opening: Ø 300 mm -Length up to: 2500mm -Number: 1x suction arm available -Transport dimensions: 1050/600/H300 mm -Weight: 18 kg
used
Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Manufacturer: Ferrari, centrifugal fan in soundproof container -Manufacturer container: Wagner Lufttechnik -Motor: Siemens, 11 kW -Speed: 1460 rpm -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm -Connection output: 700 x 500 mm -Number: 2 pieces of blower available -Price: per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg
used
Welding smoke filter, welding smoke extraction -Suction tube: flexible -Diameter: 230 mm -Length up to: 7 m -Price: per piece -Number: 3 pieces -Dimensions: 1250/290/H270 mm -Weight: 22 kg
used
Centrifugal fan, chip extraction fan, fan, suction, chip fan -Motor power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressing: - da Pa -Inlet connection: O 700 mm -Outlet connection: O 700 mm -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg
used
Centrifugal fan, chip extraction fan, fan, suction, chip fan -Motor power: approx. 22 kW -RPM: not apparent -Volume flow: not visible -Connection input: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280kg
used
Brand: Sicar Type: Wood milling bench + extraction Model: SF70 Chassis number: BO400062003 Construction year: 2003 Weight: 0,28 tons Length mm: 2500 Width mm: 1000 Height mm: 1700 Transport size L x W x H: 2,5 x 1,0 x 1,7 Condition machine : Good
used
Radial fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, suction, chip blower, high performance fan -Manufacturer: Reitz, radial fan chip extraction fan type MXE 020-018030-00 -Engine: Dutchi DM 160 MX2 15 kW -Speed: 2935 rpm -Volume flow: 180 m³/min / 10800 m³/h -Connection input: Ø 245 mm -Connection output: Ø 390 mm -Dimensions: 1460/1160/H1500 mm -Weight: 392 kg
used
Steel fan wheel---------- Technical data ---------- Pipe diameter: 300 mm, motor: 7.5 kW Sold as is, without technical inspection
used
Offer consisting of: Alko Mobil-100 Chip extraction for perfect binders - Weight: 24kg On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote
used
Kanalventilator Absaugung - Duct Fan Pia AH11 40 (Absaugung - Extraction) Serial-No. 72 602 Zum Absaugen von Holzspaenen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Kanalventilator Absaugung - Duct Fan ZENNER VTZ 560/50/2-W (Absaugung - Extraction) Baujahr / Year 2001 - Serial-No. 64.031 Volumenstrom / volume flow 2.21 m3/s Totaldruckerhoehung / total increase of pressure 3880 Pa Dichte / density 1.2 kg/m3 Drehzahl / Speed 2920 min-1 Kupplungsleistung / required performance 14.4 kW Temperatur / temperature max. 80°C Zum absaugen von Holzspaenen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Kanalventilator Absaugung - Duct Fan Coral PAP HP20 (Absaugung - Extraction) Baujahr / Year 2003 HP 20 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspaenen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Kanalventilator Absaugung - Duct Fan Coral PAP HP 7,5 (Absaugung - Extraction) Baujahr / Year 2003 HP 7,5 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspaenen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Dry Suction Wall Paint mist extraction wall Impact surface 2250 mm x 2250 mm Height with fan 2900 mm Fan approx. 1.5 kW Weight with pallet approx. 300 kg Loading dimensions approx. 2900 mm x 850 mm x H 2500 mm
used
Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type EC2-HS160M2-2 -Motor power: 15 kW / 2935 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 580 x 470 mm -Total dimensions: 930/820/H1220 mm -Weight: 395 kg
used
Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type T3C 160M2-2 built in 2021 -Motor power: 15 kW / 2940 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 530 x 580 mm / 580 x 470 mm -Quantity: 2x blowers available -Price per piece -Total dimensions: 950/800/H1215 mm / 930/820/H1220 mm -Weight: 395 kg/pc.
used
General SKU345S1114 LocationBarneveld MakeEnco No.T4438-1 Year of construction2001 Pressure Working pressure9 Bar Main Features MaterialStainless steel Volume491 Ltr. Specified Features - Extraction ExtractorDecolorizing column Capacity491 Ltr. Diameter500 mm Length2500 mm Max. temperature150 °C MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information Floorspace0,7x0,7 m Total height3,1 m Weight460 Kg Extra SpecificationsThe Decolorizing Column on offer is a top-notch device made by Enco in 2001. Crafted from stainless steel, including alloys 1.4301 (304) and 1.4571 (316Ti), the column is built to handle pressures of up to 9 Bar and can hold up to 491 liters. Standing at a diameter of 500 mm and a length of 2500 mm. It can handle temperatures up to 150 °C, making it versatile for various industrial uses. Despite its large capacity and effi ...
used
General SKU338T912 LocationBarneveld MakeKirsch AG Burghausen TypeK510 No.11543 Year of construction1999 Pressure Working pressure jacket10 Bar Working pressure tubes100 Bar Main Features MaterialStainless steel Volume510 Ltr. Specified Features - Extraction Capacity510 Ltr. Diameter322 mm Length7900 mm With jacketcheck Max. temperature150 °C MaterialStainless steel 1.4571 (316Ti) Information Total height8,3 m Weight2600kg Floorspace0,6x0,6 m Extra SpecificationsJacket side capacity 150 Ltr. Connection top side DN 15 Connection underside DN 15 Jacket connections DN 25 (6x) ExtractionKirsch AG BurghausenColumns > ExtractionBrand > Kirsch AG Burghausen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...
used
General SKU314T753 LocationBarneveld MakeHeckmann Year of construction2018 Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume1590 Ltr. Specified Features - Extraction Reactorcheck Capacity1 590 Ltr. Vessel sizesdia. 399x11828 mm Dished bottomcheck Dished top sidecheck Top connectionsDN150 OutletDN150 Max. temperature0/230 °C Extraction MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information Floorspace0,5x0,5 m Total height13,7 m CEcheck Weight2160 kg Extra Specificationsdesign pressure: 40 barExtractionHeckmannColumns > ExtractionBrand > Heckmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...
used
General SKU212T101 LocationBarneveld MakeKuehni TypeMixer setler column No.2046 Year of construction2001 Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume6380 Ltr. Motor2.2 KW Specified Features - Extraction Extractorcheck Capacity6380 Ltr. Diameter910 mm Length10175 Max. temperature-10/200°C With rotorcheck Motor2,2kW, 230/400 Volt, 1420 rpm( EX) Rotor speed42 rpm MaterialStainless steel 1.4571 (316Ti) Information Total height11.85 m Weight2920 kg Floorspace1.6x1.6 m ATEX compatiblecheckExtractionKuehniColumns > ExtractionBrand > Kuehni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...
used
General SKU345S1117 LocationBarneveld MakeHinke No.8980 Year of construction2004 Pressure Working pressure9 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume8425 Ltr. Specified Features - Extraction Capacity8425 Ltr. Diameter1300 mm Length6500 mm Max. temperature80 °C MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information Floorspace1,4x1,4 m CEcheck Total height7,5 m Weight3150 kg Extra SpecificationsMedium fluid group 2 ExtractionHinkeColumns > ExtractionBrand > Hinke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU212T092 LocationBarneveld MakeKuehni TypeEMS 600/9 - ECR 600/4 No.2776 Year of construction2009 Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume2390 Ltr. Motor1.5 KW Specified Features - Extraction Extractorcheck Capacity2390 Ltr. Diameter600 mm Length3450 mm Max. temperature100 °C With rotorcheck Getriebebau (Ex) Motor1,5 kW 220-240/380-415 Volt (EX) Rotor speed78 rpm MaterialStainless steel 1.4571 (316Ti) Information Total height4,6 m Weight600 kg CEcheck Floorspace0,9x0,9 m ATEX compatiblecheck Extra Specificationsmechanical sealExtractionKuehniColumns > ExtractionBrand > Kuehni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Ne ...
used
General SKUR0933 LocationBarneveld MakePfaudler Werke GmbH Schwetzingen TypeKolonne 1600 No.63584 Year of construction1999 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialGlass Volume10010 Ltr. Specified Features - Extraction Capacity10.010 Ltr Diameter1600 mm Length5800 mm Max. temperature200 °C. MaterialGlass - Enamel (WWG-9115) Information Total height5,8 m Weight5.670 kg Floorspace1,9x1,9 m Extra Specificationswithout clamp screw ExtractionPfaudler-werkeColumns > ExtractionBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU169K585 LocationBarneveld MakeLUWA TypeARD 300 No.20065 Year of construction1970 Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor1.1 KW Specified Features - Extraction ExtractorLiquid-Liquid extraction Diameterdia. 300 mm Max. temperature100 degr. C Motor0,75 kW 380/220 V Ex With variable speed drivecheck MaterialStainless steel Information Floorspace4,1 x 0,7 M Total height0,7 M Weight440 KGExtractionLuwa-smsColumns > ExtractionBrand > Luwa-sms What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU267N238 LocationBarneveld MakeGerhard+Rauh GmbH TypeRZE counterflow column, DN900/700 No.6321 Year of construction1996 Pressure Working pressure1 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume4000 Ltr. Motor5.5 KW Specified Features - Extraction Capacity4000 Ltr Diameterdia. 700 mm Length10 m Max. temperature95 °C With rotorcheck Motor5.5 kW (230/400 V) With variable speed drivecheck Rotor speed88 rpm MaterialStainless steel 1.4539 (904L) Information Floorspace1,2 x 1,2 m Total height12 m Weight3000 kg ATEX compatiblecheck Technical specs Extra information-1/1 bar working pressureExtractionGerard + RauColumns > ExtractionBrand > Gerard + Rau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspec ...
used
General SKU235P239 LocationBarneveld MakeQVF Engineering GmbH TypePulsierte Siebbodenextraktionskolonne DN 150 No.7989 Year of construction1998 Pressure Working pressure0.9 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume210 Ltr. Motor1.5 KW Specified Features - Extraction Extractorcheck Capacity245 Ltr Diameter168,3 mm Length6000 mm Max. temperature100 degr.C. Motor1,5 kW 500 Volt Ex MaterialStainless steel 1.4571 (316Ti) Information Floorspace8,7x0,8 M Total height0,8 M Weight900 KG Extra SpecificationsSystem consists of extraction column DN150 and pulsation head DN100 (max stroke 60 mm, 0,29 DM³ 0-150 rpm) :ExtractionQVF GlasstechnikColumns > ExtractionBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Yo ...
used
Centrifugal fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Eurovent, dust extraction fan centrifugal fan type MPR 351 -Motor: AEG 5.5 kW 2860 rpm -Volume flow: 3000 m³/h -Connection: input Ø 305 mm -Connection: output 220 x 160 mm -Base plate: 415 x 400 mm -Dimensions: 755/750/H770 mm -Weight: 100 kg