extraction system used for sale

Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible.

Material throughput: LDPE: 110kg/h, PA6.0/LDPE/EVOH: 150kg/h, PP/PA6.0/LDPE/EVOH: 135kg/h, PA6.0/LDPE: 120kg/h, EVA/LDPE: 150kg/h. Nominal output: 77kW, PCU output: 30kW, extruder output: 18.5kW, motor output: 10.7kW, heating zones: 1, heating output: 12kW. Documentation available. On-site inspection is possible.

Krones Air Conveyor diverter from 1 to 2 for PET air transport

The used Fraunhofer sorting system from 2007 is ideal for removing bad parts from bulk materials such as dry and shredded plants. The system uses a color-capable line camera that scans 20 million pixels per second. This enables precise detection with a conveyor belt width of 500 mm and a speed of 2.5 m/s, with 16 pixels per mm² being recorded. The continuous display of the bulk material image shows color-coded bad parts, and the system is intuitive to operate. Defective parts are blown out approx. 100 mm behind the measuring line using air nozzles. In 2019, the system was optimized by replacing the camera, control cabinet and valve block. The system has an output of approx. 60 to 160 kg per hour, depending on the product.

Used CIP system: 2 x 2500 litre stainless steel tanks For sale is a used CIP system with two 2,500-liter tanks. This clean-in-place system is the ideal solution for the automated and hygienic cleaning of your production systems in the food industry, beverage industry or even in the pharmaceutical sector. Two separate stainless steel tanks (2,500 litres each) Made of stainless steel (V2A)

Remmler + Soehren transport system for turning folding boxes by 180°, chain belt width approx. 85 mm, maximum length of goods to be conveyed 117 mm (cross transport), belt speed 20-40 m/min, electrical connection 400V/50Hz, machine floor space approx. 2500 x 1000 mm (LxW)

Stainless steel machine for industrial filling of thin liquid products by gravity, Solenoid valve dispensers are specially designed for filling thin-liquid products. Partial dosing or full filling (cold or hot filling) can be used. in cans, jars and bottles take place., By using an interchangeable star and a manual height adjustment, a short-term changeover to a different can, jar, or bottle size. The dosing range can be expanded as required using time-controlled valves., 4-digit in-line filler for dosing liquids,, was used for brine for sausages in jars,, Diameter of the filling elements: approx. 20 mm,, power: up to 80 fillings / minute, Dimensions / weight: 2350 mm x 1250 mm x 2200 mm

Removal system for lid to capsule 16-fold Abstract: The lids are removed from the open mold with the removal arm. The injected products are removed from the ejector side. On the removal arm, the presence of the parts is controlled. Once the unloading arm has reached its end position, the lid with a vertical servo axis into the waiting box, As soon as the box is full (counting the lids), the box is transported outside and the next empty box is pulled in. Specifications: Product Type: Round Lid Dimensions: DN 50 mm Height: 6 mm Number of cavities: 16 Cycle time of the IML system: 5 s

Manufacturer: Kraintek Model: HX360-W2/OT/LT+VT1/800x1150x850 Year of Manufacture: 2020 Commissioned on 01.11.2020, and was decommissioned in 2022 Technical Specifications: - Overall Dimensions: - Length: 8277 mm - Width: 11,640 mm - Height: 3450 mm - Machine Weight: 15,000 kg - Basket (container) Dimensions: - External: 470 × 850 × 310 mm - Max Load Capacity: 70 kg - Electrical Requirements: - Power Supply: 3-phase + PE, 50 Hz, 400/230 V, TN-S - Max Power Input: 260 kW - Operating Power: 171 kW - Control Voltage: 24 V - Distribution Box Protection: IP55 - Air Pressure Requirement: 0.4 – 0.6 MPa - Steam Extraction: Connect to central exhaust line - Safety Standards: - STN EN 60204-1: 2007-06 - ČSN EN 60204-1 ed.2 Find more here - / Contact us at -

Manufacturer: Kraintek Model: HX360-W3/LT1+VT1/800x1150x650 Year of Manufacture: 2020 Commissioned on 01.11.2020, and was decommissioned in 2022. Technical Specifications: - Overall Dimensions of the Machine: - Length: 8277 mm - Width: 11,640 mm - Height: 3450 mm - Machine Weight: 15,000 kg - Basket Dimensions: 470 × 850 × 310 mm - Maximum Basket Load: 70 kg - Electrical Data: - Power Supply: 3~N+PE, 50 Hz, 400/230 V, TN-S - Maximum Power Consumption: 260 kW - Control Voltage: 24 V - Current: 396 A - Protection (Electrical Cabinet): IP55 - Compressed Air Connection: 0.4 – 0.6 MPa - Steam Exhaust: Connect to central steam exhaust system - Compliance Standards: - STN EN 60204-1: 2007-06 - ČSN EN 60204-1 ed.2 Find more here - / Contact us at -

2.000 litre, Stock number: T3948, Litre: 2.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top Ø 500 mm., Agitator: No, CIP: Yes, Working pressure tank: None, Working pressure double jacket: None, Inner diameter: Ø 1850 mm., Outer diameter: D 2000 mm., Total height: 2965 mm., Manufacturer: Ant Systems, Model/type: Kettle & Whirlpool tank, Year: 2018, Other: With external pipe cooler

5.000 litre, Stock number: T3959, Litre: 5.000 , Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top Ø 500 mm., CIP: Yes, Working pressure tank: Unpressurized, Working pressure double jacket: Unpressurized, Inner diameter: Ø 2050 mm., Outer diameter: D 2200 mm., Total height: 2775 mm., Manufacturer: Ant Systems, Model/type: Hot Water tank, Year: 2018

6.000 litre, Stock number: T3961, Litre: 6.000 , Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 6 pcs., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Conical 60°, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the side 350 x 440 mm., Agitator: No, CIP: Yes, Working temperature: -5° C, Working pressure tank: 1,5 bar, Working pressure double jacket: Unpressurized, Inner diameter: Ø 2000 mm., Outer diameter: D 2200 mm., Total height: 4100 mm., Manufacturer: Ant Systems, Model/type: Fermentation

1.000 litre, Stock number: T3954, Litre: 1.000 , Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the side 340 x 440 mm., Agitator: No, CIP: Yes, Working temperature: -5° C, Working pressure tank: 1,5 bar, Working pressure double jacket: Unpressurized, Inner diameter: Ø 1100 mm., Outer diameter: D 1250 mm., Total height: 2075 mm., Manufacturer: Ant Systems, Model/type: BBT

1.000 litre, Stock number: T3955, Litre: 1.000 , Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: I side 440 x 340 mm., Agitator: No, CIP: Yes, Working temperature: -5° C, Working pressure tank: 1,5 bar, Working pressure double jacket: Unpressurized, Inner diameter: Ø 1100 mm., Outer diameter: D 1250 mm., Total height: 2075 mm., Manufacturer: Ant Systems, Model/type: BBT

1.000 litre, Stock number: T3956, Litre: 1.000 , Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the side 340 x 440 mm., Agitator: No, CIP: Yes, Working temperature: -5° C, Working pressure tank: 1,5 bar, Working pressure double jacket: Unpressurized, Inner diameter: Ø 1100 mm., Outer diameter: D 1250 mm., Total height: 2555 mm., Manufacturer: Ant Systems, Model/type: BBT

2.000 litre, Stock number: T3957, Litre: 2.000 , Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the side 340 x 440 mm., Agitator: No, CIP: Yes, Working temperature: -5° C, Working pressure tank: 1,5 bar, Working pressure double jacket: Unpressurized, Inner diameter: Ø 1450 mm., Outer diameter: D 1600 mm., Total height: 2475 mm., Manufacturer: Ant Systems, Model/type: BBT

2.000 litre, Stock number: T3958, Litre: 2.000 , Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the side 340 x 440 mm., Agitator: No, CIP: Yes, Working temperature: -5° C, Working pressure tank: 1,5 bar, Working pressure double jacket: Unpressurized, Inner diameter: Ø 1450 mm., Outer diameter: D 1600 mm., Total height: 2295 mm., Manufacturer: Ant Systems, Model/type: BBT

2.500 litre, Stock number: T3952, Litre: 2.500 , Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: No, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top Ø 400 mm., CIP: Yes, Working temperature: 140° C, Working pressure tank: -1 to 7 bar, Inner diameter: Ø 1380 mm., Outer diameter: D 1460 mm., Total height: 2700 mm., Other: Prepared for magnet agitator in the bottom., Other1: The tank is dented in the outer cladding, Manufacturer: Steridose Systems, Model/type: Pressure Vessel, Year: 1986

1.000 litre, Stock number: T3953, Litre: 1.000 , Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the side 440 x 340 mm., CIP: Yes, Working temperature: -5° C, Working pressure tank: 1,5 bar, Working pressure double jacket: Unpressurized, Inner diameter: Ø 1100 mm., Outer diameter: D 1250 mm., Total height: 2225 mm., Manufacturer: Ant Systems, Model/type: BBT

2.000 litre, Stock number: T3949, Litre: 2.000 , Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Conical, Double jacket: Yes, Heating coil: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top Ø 450 mm., CIP: Yes, Working pressure tank: Unpressurized, Working pressure double jacket: Unpressurized, Inner diameter: Ø 1350 mm., Outer diameter: D 1500 mm., Total height: 2400 mm., Manufacturer: Ant Systems, Model/type: Hot Water tank, Year: 2018

PLC CONTROLLED MIXING, BAG FILLING AND WEIGHING SYSTEM, for plastic granule, customized to the project, including [vertical mixers](.germanplast.eu/it/annunci/4309783-vertical-mixers-from-5-to-3 0-m3), buffers,, pneumatic system with deviators, cyclones, .., with and without loading screws, loading cells, digital display, visual and sound alarms, all managed by a PLC

The system can be used for granulate, reground, agglomerate or powder, Including: hopper, injector, blower and piping length bespoke to your project., blower of suitable power, Cyclone with filtering system and a diverting valve Constructed in sturdy painted steel or galvanized steel The supporting structure can hold 1 or 2 big bags, Possible addition of weighing system for each big bag

Manufacturer / Type: MicroStep SPL-PA 6001.25 + S500 Processing area: 6,000 x 1,500 mm + 500 mm shaft Drive: double-sided backlash-free DC servo drive Guide system: Linear guides Positioning speed: up to 44,000 mm/min Repeatability: according to DIN 28206 / IRC 2500 Control: MicroStep iMSNC incl. touch control panel and software Kjellberg HiFocus 160i Current range: 10 – 160 A Operating voltage: 400V, 3~50Hz Power: 33 kVA Gases: air, oxygen, nitrogen, argon, hydrogen Donaldson DFPRO 6 Cyclopeel – automatic filter cleaning Separation efficiency: 99.999 % at 0.5 μm Extraction volume: 4,500 m³/h Low noise ( < 75 dB(A)) Including oil/water separator and software connection

Resolution: 2400 dpi Manual plate feed line Speed 21 pl/hr. Max. plate size max. 838 x 990 mm mm plate size min. 267 x 215 mm mm

A filter and recovery system with filling and intermediate shaft and a new control system as peripheral equipment for the production of technical nonwovens and felt is available. Components: Fan, three-phase motor WN 1 8030 T.50, condenser Erko, separator (exhauster) Erko, filling shaft, intermediate shaft. Control cabinet dimensions X/Y/Z: approx. 1200mm/600mm/2200mm, weight: approx. 300kg, year of construction: 2023, total system dimensions X/Y/Z: approx. 3150mm/1100mm/3700mm. Documentation available. On-site inspection is possible.

CTP Computer-to-Plate Imagesetter For Thermal Plates 830nm, 2xLaser Heads, Solution: 2400, 2540 dpi, Format: Max. 790x1030mm, Min. 370x323mm, Plate Thickness: 0.15-0.35mm, Speed: 23 Plates/Hour

A MWT reverse osmosis system is available. Capacity: approx. 800l/h. On-site inspection is possible.

HSG Store Pro Smart automation for modern production Fits 3015 and 4020 available. The HSG STORE Pro is an intelligent and flexible automatic loading and unloading system designed to effectively address common production challenges such as staff shortages, limited space and low machine utilization. With a tower height of only 4.4 meters and up to 10 storage positions, you can use your space up to 70% more efficiently. Synchronized processes minimize waiting time and maximize machine capacity – ideal for higher outputs even in the second or third shift. The STORE Pro supports a variety of sorting strategies and grows modularly with your production needs. Affordable, secure and easy to use – the perfect automation solution for every step of your process. Automation reduces waiting times because logistics employees have less manual material. At the same time, our system ensu ...

MicroStep CNC Guide Machine SPL-P3001.20 with a plasma source HiFocus160i with automatic gas console from Kjellberg. Cutting ranges: Sheet thicknesses from 0.5mm to 40mm in the field of structural steel. Bujpvvuoft Sheet thicknesses from 1mm to 35mm, in the area of aluminium and stainless steel. The plasma cutting machine type SPL is a numerically controlled machine designed for material separation by plasma jet cutting. The machine is functional and is currently in use in production. The usable area of the cutting table is 3000mm x 1500mm. Expandable in width by 500mm by means of grid inserts in the shaft of the pipe cutting system. Including RSV 300 pipe cutting machine Including 3 interchangeable heads for Percut 170. Wear parts worth approx. 3,000 euros In addition, a Kjellberg 160i plasma cutting machine as a replacement. MSNC 500 control system Pre-installed ...

CNC Plasma Cutting Machine MGM Arrow 2000-4 , Year 2008 Control: MS 100 Working Area : 2000mm x 4000mm 1 x Plasma Kjellberg HiFocus 160i with automatic gas console - incl. extraction 5500m³ built in 2006 / MGM - incl. declaration of conformity - incl. tech. Documentation - Incl. various nozzles (spare parts) at call

Manufacturer: URT Type of Machine : Assembly Table Year of Manufacture: 2018 Certification: CE Marked Find more here - / Contact us at -

Spray cleaning system with basket rotation Batch dimension: 400600280 You can find more systems on our homepage under Used systems

Optimal for degreasing, possibly also preservation Automatic Loading - Basket Rotation Vacuum drying Batch dimension: 530320200

: 2000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: mm : kg height adjustment: 750 - 1100 mm weight of the machine ca.: 0,80 t dimensions: 2,0 x 0,55 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A.Z.O. Indoor Silo System Round silo 4 x 4 tons in steel Control with Winback PC 100 kg scale for sale Price on request Phone 0172 8345457

Handling device, handling system JÄGER HANDLINGManipulator for screwdriving technologyType: Handy-flex 200Horizontal movement: 450 mmVerticate movement: 600 mmLoad capacity: 4 to 10 kgThroat: 150 to 600 mmGuide column vertical: 25 mmGuide columns horizontal: 16 mmTool holder: 33 x 33 mm Screw clamping- Movable in three axes (horizontal, vertical, rotatable)- Rotary encoder KÜBLER for rotary movement type 8.5873.5320.B311. S003 - Displacement transducer BALLUFF for horizontal movement type BTL6-A110-M0450-A1-S115 - 2 pieces of balancer for horizontal movement

Turning station RITTAL / E SYS-K System GmbHWome machine for packaging made of ALU system profileSwivel station with roller conveyor, ALU system profile BOSCH REXROTHweight of the turning device 730 kgAs good as new; used

Handling device, handling system JÄGER HANDLINGManipulator for screwdriving technologyType: Handy-flex 200Horizontal movement: 300 mmVertical movement: 370 mmLoad capacity: 10 to 14 kgProjection: 250 to 550 mmGuide column vertical: 25 mmGuide columns horizontal: 16 mmTool holder: 26 mm oval with screw clamping- Movable in three axes (horizontal, vertical, rotatable)- 1 piece balancer for vertical movement TECHNA, type 9340, adjustment range 10 to 14 kg- Adjustable latch for the Vertical movement, manual unlocking via

Filter fitting, filter unit COMPAIR for compressor systemsCompressed air filterType: CF 0087B ZPFabric no: 3363006 / 05 / 005Operating pressure: max. 16 barThreaded connection: G 1 1/2Flow rate: approx. 8.5 m³/min Filter element no: CE 0087B- Filter housing made of aluminiumWeight: 5 kgDimensions L x W x H 125 x 110 x 420 mmgood condition; used

R 537: Recycling plasticizer (roller extruder) "MTA" Year 86, drive 200KW, plasticizing capacity approx. 800-1000kg/h, ideal for recycling plastics. The facility consists of the following parts: -Roller extruder -Batcher -Shearing device -Motor 200KW -Engine control cabinet "Schorch" -1 lattice box pallet spare parts FUNCTIONALITY: Ground plastic waste is fed into the plasticizer ------- heating ------- sausage kneading ------- shearing depending on the workpiece weight ------- further processing in presses The recycled plastic waste was used to make large parts such as garbage containers, plastic pallets, benches, flower pots, etc.

A Zippel single-chamber cleaning system is available. Number of containers: 2, container volume: 300l, usable volume: 600l, usable height: 850mm. On-site inspection is possible.

An optical inspection machine Bizerba for label and seal inspection in packaging lines is available. Camera technology: dual-camera configuration, camera placement: top and bottom, conveyor belt speed: 90m/min, machine dimensions X/Y/Z: approx. 2100mm/900mm/1600mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

An AFS printing, laminating and coating system (corona pre-treatment) is available. Roller width: 2700mm, electrode width: 2500mm, max. mechanical speed: 250m/min, max. generator output: 6kW, operating mode: 1- and 5-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: both sides. Documentation available. On-site inspection is possible.

Bosch cabinet equipment for Anker HIP/TEF The system is a Bosch in-house production carried out by HIP/TEF. The cabinet furnishings were designed for anchors and are in neat condition. If necessary, it may also be possible to convert the machine according to your own wishes. Manufacturer: HIP/TEF or Bosch Model: HiP/TEF12 Type: Cabinet equipment, possibly for anchors Voltage: 230 V Scope of delivery: cabinet furnishings plus parts of the blue box (see pictures) Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!