We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,570 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
ARPAC M16632 Manufacturer: ARPAC USA Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. F ...
new
CONTI-WELD PLASMA CUTTING EQUIPMENT TYPE 60 H CONTI-PAC -60 amp -Snijcapaciteit in staal 20 mm -Ingebouwde luchtdrukregelaar -Met toebehoren -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
LDS Here we offer an LDS shaker system. V780 Shaker Specification: 685 x 490 x 860 mm (HxWxL) Weight 381 Kg Sine force peak 5115 N Random force RMS 4226 N Acceleration peak 1.9 m/s Mass of the moving element 4.7 kg Usable frequency range DC - 4000 Hz Maximum load capacity up to 100 Kg Dimensions 714 x 890 x 490 mm Air cooler included (38 Kg) Type: V780 Amplifier Input supply – three-phase 50/60 Hz: 380, 400, 415, 440 V60 Hz: 480, 500 V Output power 5 kVA Nominal output voltage 100 V rms (sine) Continuous output current 50 A rms (sine and random) Output current 150 A for 100 ms Switching frequency 150 kHz Modulation range DC to 10 kHz Total harmonic distortion typically 0.15 % Input sensitivity – differential output 1.0 Vrms for 100Vrms output Input impedance 10 kΩ nominal Amplifier efficiency > 90% Module efficiency 93 % Signal-to-noise ratio§ > 68 dB ...
used
The Pester machine is a two-station palletizer fitted with KUKA (KR16) robot technology. The cartons are palletized by the Pewo PAL 6 form on pallets according to a product-specific palletizing scheme.
used
MAPS devices for grinding and polishing Here we offer a Struers MAPS preparation system. High capacity Less consumables, less work Unique reproducibility Main features for the highest quality and the preparation of high quantities Specifications: Connections: Current: Three-phase Compressed air: 6 bar (90 psi) - consumption approx. 200 l/min Water: Supply via house connection, disposal via house wastewater Size and weight: MAPS preparation modules Height: 1905 mm Length: 1535 mm Depth: 1115 mm Weight: 850 kg Sample Holder Sizes: 160 mm Ø and 200 mm Test holding arm Drive motor: 150 rpm, 0.37 kW (0.5 hp) Pressure force: 50-700 N in stages of 10 N Preparation station for plane grinding Main engine 5.5 kW (7.4 hp) Speed: 1450 rpm Grindstone: Ø 356 mm, grinding width 115 mm Dressing: automatic funnel for the grindstone Circulation cooling unit: 60 l/min, capacity ...
used
Thermo Fisher Scientific/Dionex Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3,000 ml/min (capillary) Accuracy of flow rate: < 0.1% Precision of flow rate: < 0.1 % Gradient dosing accuracy and precision: ± 0.5% at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 24.1 kg (55 lb.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Condition: used Scope of delivery: (See pictures as pictured) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.
used
Horiba Here we offer you a Horiba exhaust system Mexa 7100D. Including JAG-10-000-061 bottle trolley approx. 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust gas aftertreatment, Assessment of exhaust gas aftertreatment systems Modal analysis (dynamic or transient analysis) during transient operations Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 Kg Year of construction 2016 Type: Mexa 7100D Condition: used Pick-up from location Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.
used
We offer you here a cooling unit. BITZER + eco Type: 4EC 4,2Y-4OS If you are interested and for more information we are available.
used
Kitzinger planks wash consists of: Transport system Stacking system Discharge stack system MFI Manufacturer: Kitzinger
used
Heat exchanging type: VES 8''SX 1 FV minimum temperature: -10 St C pressure: 18 bar not used
used
4 cleaning heads, 1 filling head 60 KEG/h, 30, 50 DIN keg with Aussenwascher
used
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Aasted Type: AT 2000 disc tempering machine for chocolate YOM: 1971 output: from 750 to 2.000 kg/hour. electrical: 380/400 VAC different: working order I offer this machine in as-is where-is condition
used
Ilapak stainless flow wrapper Carrera 2000 PC Stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel.
used
Jupiter JU 45 Walter Plant Machines Nr: + # 2055 Number of baking tongs 45 Upper engraving 5 x 5 mm Underengengravings 5 x 5 mm Edge yes Tool 22 ° Gas Propan Location: Germany The machine is used to make sweet, rotated squirrels with or without a rim and is sold with a tool for 22 °. The conveyor belt and stacking table are included. The machine is currently in storage.
used
Moulded Cones Machine Steinhoff HWA 54 Steinhoff/GAM/Haas Price: € 9.900 Machines # 79 Built: 1972 Number of baking tongs 21 Products per baking tongs 6 Location: Germany The machine is used to make moulded cones is sold with a tool for tulip squirrels. It is the predecessor of the Steinhoff EWA 65. The machine is currently in storage.
used
Flat waffle machine HAAS SWAK 64 Haas/Hebenstreit Price £75,000 Built around 1980 Location Germany Dimensions: -Height: 1500 mm -Height machine head: 2200 mm -Width: 1300 mm -Wide machine head: 1860 mm -Length: 12,000 mm Power supply: -Power: 4 kW -Power: 3x380 V -Number of baking plates: 64 -Engraving: 2.5mm x 0.5mm -Plate size: 460 mm x 290 mm -Leaf thickness: 2.8 mm-3.0 mm -Efficiency: 450-500 kg/8 h -Weight of leaf: 55 g/leaf -Baking time: 2:20 min Machine is sold together with the arc cooler and is currently in storage.
used
Hollow hip machine Haas EWB Price: £25,000 Machines # 3379 Built: 1975 Power: 10 kg/hour Connection power: 2.5 KW Volt 3x 380 Natural gas:? Location: Poland Dimensions -Length: 3.20m Bed: 1.70m -Height: 1.40 m The machine is used to make holhippets between 50 and 220 mm in length. The thickness can be adjusted manually.
used
Steinhoff PRO 3 076 - Baking oven for rolled sugar cones - Capacity: approx. 9.500 pcs./ hour - Wafer length: 90 mm - Number of baking plates: 76 pcs. - Year of manufacture: 1998
used
Siemens combined fluoroscopy and X-ray system Sireskop SX with the following device components: generator Polydoros SX 65/80 tube OPTITOP 150/40/80 HC 0.6/1.0 digital image processing Fluorospot TOP Image intensifier 40 cm PACS integration DLR 2nd Workplace 3D3 ceiling tripod 2nd tube OPTITOP 150/40/80 HC 0.6/1.0 vertical stand Vertix complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless oth ...
used
Siemens combined X-ray and fluoroscopy system Sireskop SX with the following device components: generator Polydoros SX 65 tube Opti 150/40/73 C 0.6/1.0 digital image processing Fluorospot H Image intensifier 33 cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the bu ...
used
Siemens X-ray and fluoroscopy system/ angiography Polystar TOP with the following device components: generator Polydoros SX 65/80 tube Megalix 125/40/82 CM 0.6/1.0 Digital image processing Fluorospot TOP Image intensifier Sirecon 40-4 HDR 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is ...
used
Dornier Opus with the following device components: generator Hofmann Selector D tube Comet DI 97 HS-33/81-150 0.6/1.2 Image amplifier 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qu ...
used
Fischer Imaging Mammotest Plus S with: Mammotome SCM 23 (biopsy) Tube Varian M-147 SP 0.1/0.3 complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patien ...
used
Haas HTRO D 200 G waffle squirrel Price negotiating matter Built in 2002 Location Poland Product: 110 x 47 mm, 23 ° Dimensions: -Height: -Width: -Length: Energy supply: -Performance: -Power supply: -Gas: Natural gas -Gas consumption: About 25 m ³/h -Number of baking plates: 100 -Number of baking courts per baking plate 2 -Engraving exterior: 6 x 6 mm -Plate size: -Core strength: 1.6 mm Machine is currently in production. Walterwerk/GAM/Haas
used
Complete PET line Blower KRONES Kombi 8 Cavities Pressure filler 60 valves KRONES Labeling machine KRONES Hot glue paper labels Handle applicator COMAG Palletization ACMI Pallet wrapper PIERI The system is set up in 5 formats The plant is still in operation until the end of 2019 Capacity of the system 12,000 B/H at 1.5 lt bottles Built 2003-2009
used
CP-Citopac FKS-10 CP suppository filling, cooling and sealing line for pre-formed plastic casings, comprising: SFD-10 CP filling machine for pre-formed plastic suppository casings, output up to 10,500 per hour, with 2 filling stations for 0.5 - 3.5ml dosing range. Includes mobile electrically heated and stirred 30 litre product supply vessel. KTE-10 CP continuous cooling tunnel for up to 10,500 per hour, approx. 25 meters cooling length (about 1,450 suppositories) including evaporator with fan. U-shape layout. BST-10 CP sealing machine, for sealing the openings, with cutting and trimming station, coding station, and cutting station for the required count of strips. Designed for suppository casings with a distance of 17.35mm between each casing and a reel height of 45-51mm The line has been fully overhauled mechanically and electronically in 2019 and is as new.
used
Waffle squirrel machine Walterwerk Jupiter JU 72 Price VB Built in 1988 Location Germany Energy supply: - Gas: natural gas - Number of baking plates: 72 - Engraving Outside: 10 x 10 mm - Engraving Inside: 10 x 10 mm - Plate size: 250 x 250 mm Machine consists of: oven, crossband, heart on heart device, packing tape Machine is currently stored.
used
CNC Portal Plasma Cutting Machine + Autogen Manufacturer: Messer Type: Omnimat L 5600 Built: 1999 CNC control: Omnicom Track width: 5,600 mm Career length: 25 m Working range: 4 x 22 m 1 plasma torch with hypertherm HD3070 power source 2 car-gene burners 1 powder marker Suction table Filter system Donaldson
used
Cutting bun plant Kövy with Fortuna head machine KM 6 in a row. The Kövy is compact with settling tape on planks requires less space than with magazine. Head machine with flourer. with Fortuna head machine KM 6 with settling tape Built in 1999 Maximum hourly output 8400 units Capacity of the pre-fermentation cabinet 530 pieces Capacity of the intermediate fermentation cabinet 780 pieces
new
Cooling unit BITZER 4DC-5.2Y-40S / Sound-insulated Coolant: R404A
used
Flat waffle machine Haas SWAK 72 including arch cooler Manufacturer: HAAS Model: SWAK 72 Machine No.: 11351 Dimensions baking plate: 460 mm x 290 mm Number of baking plates: 72 Weight Net: 17,000 kg Length: 11,705 mm Height machine head: 2,030 mm Height machine body: 1,600 mm Machine is currently still in production and is sold together with an archcooler. Hebenstreit/Haas/Danger
used
HAAS SWAK 40 for waffle chopsticks Manufacturer: HAAS Model: SWAK 40 Factory number: 18812 Waffle blade dimensions: 460 mm x 315 mm 40 baking plates - 120 rods per baking plate Dimensions: Net Weight: 10,200 kg Length: 6.665 mm Height machine head: 2,030 mm Height baking machine: 1,290 mm Gas oven HAAS RAISES DISPUTE DANGER
used
Composite system MCC/LC6 B 3X040 BT Y / Soundproofed Bitzer Aggregate 3 pcs. 4EC-4.2Y-40S Coolant R404A
used
Automatic dough filling in bread boxes / baking boxes from Döpke.The dough pieces are filled precisely by pressing out the screw pressing system and still get their shape, gentle dough treatment.Compact machine easy to operate and easy to clean. Optionally, we also have horizontal kneaders from Döpke in the warehouse. Plant is immediately available in the warehouse. automatic filling of dough in bread dressing boxes with portioner 400 V high current connection with hydraulic pump -
used
BasysPrint 855 (Online System) Built 01/ 2010 2-Laser Head UV,405nm Exposed Plates 85600 Max:Plate Size 920 mm x 1,080 mm Min: Plate Size 323 mm x 450 mm Cassettes Manager 1 Cassettes With Kodak Merxury 85 PlateProcessor Server PC, 20 TFT Monitor.
used
Description Brand GUNTNER Model GHF 050/1E/17 ID 109454-16 Status Active Price 1.600 € + VAT Year of manufacture 2011 Location Oradea (RO) Cooling equipment | GUNTNER GHF 050/1E/17 manufactured in 2011. Size (L x W x H): 1000 x 500 x 500 mm. 2 pieces available, one missing a fan. Heat Exchanger Aligned or staggered tube pattern Special copper tubes for HFC, coolant and CO2 Stainless steel tubes for NH3 Surface-corrugated aluminium fins for high heat transfer Casing Corrosion-resistant aluminium alloy AlMg up to 500 mm fan diameter Powder-coated with RAL 9003 Hinged side cover with hinges Tray Hinged and thermally-decoupled (condensation free) Separate drip plate Corrosion-resistant aluminium alloy AlMg Powder-coated with RAL 9003 Large condensation drain with 45° incline Fans Proven quality fans Standard with two speeds (for fan diameter of 50 ...
used
Vacuum homogenizing system mobile table version Utility space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Content 5 litres gross Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW
used
M. No.: 20051619 Basic Functions: Slit, Cross cut, Crease In-feed paper size: 210(W)x210(L) to 370(W)x520(L)mm Minimum finished size: 55(W)x45(L)mm Paper weight: 120 to 400gsm Depending on paper quality Operation: 4" Touch Screen Job memories: 263 preset jobs & 150 customized job memories. (100 MANU SET + 50 FLEX MODE) Feeding mechanism Upper belt tri-suction suction feed (Patented) Side blower Skew adjustment Side aligner Double feed detection Cut mark registration Feed tray stacking capacity: 100mm Speed 8.8 sheets / min. : SRA3 21up business card 11 sheets / min. : SRA3 8up post card 12.2 sheets / min. : SRA3 4up greeting card 15.4 sheets / min. : A4 2 cuts & 1 crease
used
No.: L13457 Y.O.M.: 1990 Pressure working space: 4 bar Pressure double jacket: 4 bar Double-acting mechanical seal Locking pressure station speed-controlled scraper Condition good various spare parts: seals, mechanical seals Dimensions LWH: 1100 x 900 x 1750 mm Weight: approx. 900 kg
used
Exhaust filter diesel particulate filter cleaning system for free burning of clogged particulate filters. Consisting of heating element and control. Nh7p9 Connection 400 Volt Power 9,000Watt
used
Waterjet cutting system mobile Manufacturer Schmidt, Krantz & Co GmbH / Woma Maximator WS103 HFA-HD-Aggregat Maximator waterjet cutting system Waterjet cutting with 2,500bar Foerder power 2.3l/min Cutting head handbetaed, manufacturer Woma Weight 1,000KG External hydraulics with max 350 litres of foerder power required, not included!
used
2 rolls 1st role: Dimensions (x-y-z) mm: 1300x720x650 2. Role Dimensions (x-y-z) mm: 1500x400x650 Forks tiltable: Yes Max Weight: Kg: 400 Switch box + roller gears Total connection: 2.5 kW
used
used head machine King Rex Industry T5/4 with 5 and 4 rows with dough portioner. -Industrial Machine -with dough pre-portioner -4.7 kW -50 Hz -Control voltage 24 volts -Supply line 3x400-415 V + N/ PE
new
The IRS 120 Easy is the perfect entry point into cable recycling. The special combination of large flywheels and multi-part segment cutting knives makes it possible to efficiently recycle old cables made of copper or aluminium even without high power consumption and without shredding. The machine impresses with its small footprint, is easy to maintain and easy to use. Compared to most of the competition's systems, the machine has two separate fans for separator air and dust removal. This eliminates the usual interactions between more or less clogged filters and the purity of the copper granules. In addition, the separator air is not roughly adjusted via throttle valves, but by sensitive adjustment of the fan speed. This gives you the best qualities in finished copper. This machine is an immediately available storage machine and has 4 screen inserts, electronic pre-equipment for ...
used
-) Working area X: approx. 3,300 mm -) Working area Y: approx. 1,300 mm -) Working area Z: approx. 300 mm -) Main engine: approx. 7.5 kW -) Tool change points: 2 x 24 pieces Fix and 1 x 10 with you -) Lock box unit: permanently installed -) Machine table: console table -) Positioning aid: Yes -) Workpiece special clamping system: Yes -) Software: SCM XILOG 3 -) Number of milling spindles: 1 piece -) Speed: 18,000 max rpm. -) Torque support: Yes -) Tool clamping system: HSK-F63 -) Design: boom machine -) Vacuum pump: Yes -) DXF interface: Yes -) Chip conveyor belt: Yes -) CE mark: J Yes -) Total connection: approx. 22 kW -) Weight: 9,600 kg
used
The profile perforating machine INTESO S3130T was manufactured in 2011 in the Czech Republic. Technical parameters: - Maximum internal diameter of the sheet metal coil: 80 mm - Maximum length of the finished product: 3000 mm Technical data : - screen control panel: SIEMENS - maximum length of profiles: 3000 mm - maximum cross-section of perforated profiles: 120 x 80 mm; fi 80 mm - automatic linear feed - optical sensor for automatic control of the correct length of the part - linear positioning of the hydraulic cylinder stroke - non-deformation perforation technology - the possibility of perforating profiles of various shapes - memory of perforation programs - two-sided perforation (in one operation) and one-sided perforation - automatic lubrication - maximum pressure of the hydraulic press in the line: 147 kN (15 tons) Tool accessories for the INTESO S3130 T punchin ...
used
Sell a Thermovac TM21 vacuum meter with high vacuum sensor according to Pirani. (measuring range 500 bar to 1000mBar)
used
Continuous plank gluing press Suitable for hardwood wood thickness: 11 to 45 mm. Max wood length 2600 mm Gluing bed length: 6 m. Cross-chain transport Angle transfer and loading in the press with side glue, PVAc glue press with bed 1.58 x 10 m., hot water heated, Bohqqiku Hydraulic unit with 15 kW, v-outlet saw cross saw with running Mechanization available for sizing Disrun Vakumm Stacking Device
used
Catalog number 4348 - 150mm cutting width - cutting height from 45-200mm - kerf thickness 1.3-1.4 mm - number of saw frame strokes 450 strokes / min - main engine 11kW - feed speed 1.5m / min - infinitely variable feed - central lubrication included: - saw frames x 6 pcs - spacers about 200 pcs - balls around 60 pcs - guides 12 pcs - spare support frame It is very easy to change the saw frame by turning the machine. Overall dimensions: - length 2500mm - width 750mm - height 1650mm - weight 2200kg - band sawmill used - perfect condition - original technical documentation Net Price: 85900 PLN Net price: 20452 EUR calculated according to the price of 4,20 euros (With higher fluctuations the price may change)
used
Dough part machine / head machine KING, type: Mini Rex 4000 TR-FS -In bakery condition- - SK58 + AK70 - Weight range up to 130 g per round-worked dough - Capacity up to 4,000 pieces per hour - 2 row-in-the-g - Immediately available - In bakery condition, ready for use Sightseeing and test run are possible on request.