129,267 used machines on RESALE, but how to find them? Machine Search
Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Loher 7.5 kW 1445 rpm -Volume flow: m³/h -Number: 2x fan available -Price per piece -Dimensions: 895/895/H865mm -Weight: 171 kg/pc.
Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 600 x 240 mm -Volume flow: m³/h -Dimensions:790/700/H790mm -Weight: 97 kg
MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.2 m -water cooled -Transport dimensions: 600/500/H120 mm -Weight: 4.6 kg
Weibert RLA 125 Clean air extraction system Rated volume flow: 1095 m3/h Minimum volume flow: 884 m3/h Max Vacuum: 2220 Pa Chip collection volume max.: 255 ltr. Engine power: 2.2kW Connection 50Hz: 400V Weight: 194 kg Dimensions in mm: 1100 x 830 x 1650 Suction nozzle diameter: 125 mm Height lower edge suction nozzle to the ground: 850 mm Max sound pressure level 73 db (A) G&STÜ-5131250
MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.35 m -water cooled -Transport dimensions: 640/540/H120 mm -Weight: 4.8 kg
MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.25 m -water cooled -Transport dimensions: 600/500/H130 mm -Weight: 4.8 kg
ABS 2480 Aspirator N E U MASCHINE ! Suction system ABS 2480 400V 2 hp 300 L chip sack Suction capacity of 2480 m3/h 2 100 intake connections Weight 51 kg METAL WINGS! Driving equipment! G&HM-ABS2480
vertical design, for simultaneous extruding of 4 strands, Sausage masses, etc. each strand with a diameter of approx. 15 mm, Capacity approx. 15 l, Drive 1.5 kW
Flexible extraction arm for welding smoke filter, welding smoke extraction -Welding fume extraction pipe: flexible -Tube: Ø 325 mm -Total length: 2300 mm -Transport dimensions: Ø 325 x 240 mm -Weight: 5.4 kg
Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 590 x 160 mm -Volume flow: m³/h -Dimensions: 790/710/H790 mm -Weight: 104 kg
Dust Extraction Plant Manufacturer: Nestro Year: 1991 Filter unit: Filter hoses: 121 pcs.(arrangement 11 x 11) / D230 x 2600mm Filte surface 261 m2, Filter material: category G Automatic motorized vibration cleaning / 4 motors Fire-extinguishing ducts Return air system Fire damper Pipes, Pipe bends Ventilators: Ventilators 3 pcs. a 7,5 KW, D 350mm Ducting, Ducting bends, ducting shutters with chains Control unit Nestromat 3 x Transducer coils for start automatic: 15 x
Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg
radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg
1 pc. Dassler high-pressure centrifugal fan is for sale single inlet with sheet steel housing with the following performance parameters: condition: new, unused type: DCAS-852-2T-10 suction DN: 280 power: 7.5 kW air volume: approx. 4300 m3 / h speed: 2800 rpm air temperature conveyed: -20 to + 120 ° C motor: insulation class F / protection class IP55
Capacity 2500kg. Spreading at 27 metres. Auction-ID: A3-43507-39038
Extraction of wood in working condition Auction-ID: A3-43506-9042
Ceiling filter 160 B 10x10/20/101 - motorized shaking, 0.18 kW - Filter area 100.5 m² (BGIA Cat. G) - Filter 2000 x 160 mm, 100 pcs. - Extinguishing device - Weight 520 kg - Dimensions. 1,950 x 1,970 x 2,450 mm Chip keeper SPB2020 - Volume approx. 2.7 m³ - Dimensions 2 x 2 x 990 mm - Discharge screw - Agitator - Gear motor 1.5 kW Centrifugal fan S300 F/L2 11.0 kW - Nozzle-Ø 300 mm - Vol.Strom 5.300 m³/h, 4700 Pa - Protection class IP54, pos. GR 270 Fan 7,5 KW switchboard - Star-triangle circuit 11 kW - controls both fans and 1 x motor. Shaking All information is subject to the actual equipment
RLA 210 Clean air dedusters Metal fan wheel Inspection opening for cleaning the bypass filter manual cleaning Extraction of wood chips Not suitable for grinding dust mobile very quiet High extraction performance with small footprint Suction nozzle 200mm Nominal volume flow 2262 m³/h Volume flow max. 3700 m³/h Negative pressure at Vnenn: 2482 Pa Filter area 22m² Dust class M Residual suction content H3 Chip drum volume: 2x165l LxWXH 1755 x 830 x 1800mm Motor 3kW 400V 50Hz Weight 259kg G&STÜ-5132100
volume capacity: 2500 m3/h 0: 3000 mm total power requirement: 1,1 kW weight of the machine ca.: 0,08 t dimensions of the machine ca.: 0,58x0,58x0,58 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Consists of: MCP SmartFilter, multifunctional filter system, compressed air consumption 60 liters per cleaning pulse at 6.0 bar compressed air, installation for indoor, outdoor, material 2 mm galvanized sheet steel, filter cleaning method pulse jet, application smoke, dust, working pressure (kPa): maximum vacuum pressure: 6 kPa., maximum overpressure: 0 Pa. 1.5 kPa for silotop solution) dust bin capacity (l) 50 liter container, filter surface 211.2m², capacity (max. airflow 14000m³/hour, multifunctional filter system for both indoor and outdoor installation, MCP filter system is widely applicable, typical industries are metalworking industry, food industry, pharmaceutical industry, chemical industry, concrete and cement industry, plastics processing industry, woodworking industry and other dust-producing industries, 16 pieces of filter elements, SC141 – antistatic polyester with PTFE ...
Extraction system for wall mounting Manufacturer Plymoth Special electrostatic precipitator system without paper filter! Type EFO5000 Electrostatic precipitator, function via electrical charging of dust particles. Used to extract oil mist. Details according to photos. Special price
Suction fan Slow runners D= 350mm Air capacity 6250m³/h
NOTE: Not working Auction-ID: A1-41991-22
We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 40. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us. We have many brands and models machines, tell me what you need seriously!
High-performance flue gas fan very good condition closed wing for high pressure 15kW V-belt transmissions
The "Epoch TM" extrusion casting apparatus (wide slot nozzle) has been designed and constructed for the thermoforming of polypropylene (heavy films). Operating fluids PA12, PP For other materials, contact must be made in advance with the manufacturer in order to check the processability. Specifications: Weight 839 kg. ; Power supply 230 V; number of zones cast body 14; Encapsulation block 2; KW total: cast body 21.9 KW; Auto Gauge 730 KW; Cast lip heating 3.4 KW; Additional equipment: internal edge boundaries with fixed length
Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)
Suction fan S 250 Motor power 5.5 KW 400V Air capacity 6700m³/h
Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)
Divided over 2 pallets, Swivel arm length approx 275cm
Including various extraction pipes (already disassembled).
maximum number of results exceeded
please refine your search
50 € 
