extr used for sale

Radial fan, chip extraction blower, fan, extraction, chip blower -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg

Cast Film CoEx System (ABA), PE / PP, Capacity: approx. 400 - 700 kg/h, Main extruder, 120 mm, co-extruder of 60 mm, screen changer, melt pump, Co-Ex block, nozzle 1,650 mm, 2-roll chill-roll smoothing unit, cooling section, extractor, double winder with cutting device and edge control, edge trim, film measuring device thickness NDC (without measuring head), incl. operating instructions and e-plans.

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Inlet connection: Ø 600 mm -Outlet connection: Ø 600 mm -Dimensions: 1600/1400/H1800 mm -Weight: 800 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 18.5 kW -Speed: - rpm -Volume flow rate: approx. 7000 m³/h -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm -Outlet connection: Ø 350 mm -Dimensions: 1120/840/H930 mm -Weight: 284 kg

Weibert ASA 2803 Aspirator Rated volume flow: 2800m3/h Filter area 3.84 m2 Chip collection volume 240l Suction socket: 203mm Suction nozzle outlet: 3x 100mm Sound pressure level max. 87.5dB (A) Recording power 2.2kW Engine 400V 50Hz LxWxH 1500 x 500 x2100mm Weight 53kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible -Inlet connection: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280 kg

MABS1500 Extraction system metal for metal shavings easy filter change large collection container with drawer stable housing Engine: 1500W, 230V or 400V Suction capacity 1500 m3/h Fan wheel diameter: 300mm Suction connection: 100mm Weight 73kg

MOBILE RAUCHSANLAGE With the LAS 250 suction and filter system, the air can be cleaned directly at the workplace. In this way, nuisances and harmful effects from unpleasant odours are avoided. Due to the high filter performance, up to 2 workstations can be equipped. Characteristics: Low noise level Adjustable volumetric flow controller High-performance fans with minimal energy consumption Recyclable filter with high capacity Easy operation, maintenance and filter change Two ways to suck out the contaminated air: suction arm with attachment or hose (must be ordered separately from the manufacturer) Suction flange: 2 pieces for suction hose, diameter 50 mm Durable, brushless electric motor Throughput: 250 m3/h (8,829 ft3/h) Power: 0.37 kW (0.5 hp) Manufacturer: LOCTITE Type: LAS 250 All information without guarantee

Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC

Domino Lasers, Succion system with carbon filter. Can be used for Domino lasers markers or for others Engraving lasers systems.

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 4 kW -Speed: 2850 rpm -Max. Volume flow: 7200 m³/h -Max. Pressure: 120 kp/ m² -Connection input: Ø 450 mm -Connection output: 400 x 400 mm -Impeller Ø: - mm -Dimensions: 1030/930/H1240 mm -Weight: 222 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg

radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow rate: 3200 m³/h -Inlet connection: Ø 400 mm -Outlet connection: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg

New laboratory extruder 25/25 LD Extruder Motor - AC Motor 2.2kW Water bath - 1000 mmm Granulator for a strand

Single-screw extruder • Type: 120/28 LD • AC Motor - 75 kw • Screw speed: 150 rpm. • Extruder cylinder: Air-cooled • Degassing zone Sieb changer • Strandhead Water bath: 4.5 m Granulator SG 200 Classic sieve Silo with conveyor fans: approx. 1m3

radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: approx. 3 kW -Inlet connection: Ø 230 mm -Output connection: 335 x 290 mm -Impeller: Ø 340 mm -Dimensions: 540/580/H660 mm -Weight: 80 kg

Funnel, extraction hood, filling funnel, drip tray -Extraction hood: can also be used as a filling funnel for e.g. conveyor systems -Design: sturdy steel frame, stainless steel funnel sheet -Opening: Ø 200 mm -Dimensions: see photos -Transport dimensions: 2020/910/H300 mm -Weight: 96 kg

EDI Autoflex Extrusion Die width 900 mm.

Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg

Key data: 70

Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m

Farrel Twin Screw / Rollerdie Extruder complete available with Motor and Inverter Description attached!

ASA 3303 Raw air extraction system Rated power 3260 m3/h, Filter area 2 x 3.6 m2, Power 400 V 50 Hz 1.5 kW, 2 dust bags G&STÜ-5123303

Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW -Speed: 2895 rpm -Volume flow: 1060 m³/h -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Loher 7.5 kW 1445 rpm -Volume flow: m³/h -Number: 2x fan available -Price per piece -Dimensions: 895/895/H865mm -Weight: 171 kg/pc.

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 600 x 240 mm -Volume flow: m³/h -Dimensions:790/700/H790mm -Weight: 97 kg

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.2 m -water cooled -Transport dimensions: 600/500/H120 mm -Weight: 4.6 kg

Furnace 1200 temperature range 100 - 1200 Celsius inner dimensions 1x1x2m power 50kW PLC could be various size industrijskih peći INDUSTIJSKIH PECI NIKOTIRANJE CEMENTIRANJE TERMIČKA OBRADA ČELIKA KALJENJE INDUKCIONO PLAMENO ALATNIH I KONSTR. ČELIKA ŽARENJE MEKO NORMALIZACIONO STABILIZACIONO CNC obradni centri za struganje Završno precizno struganje Brušenje nakon termičke obrade, Zatvaranje tolerancija - lanci mjera, Kombinovani postupci struganja i glodanja, Dijelovi za automobilsku industriju i industriju mašina od čelika obojenih metalą CNC 3-osni obradni centri, Konvencionalno glodanje za pripremu i doradu, Kombinovano CNC struganje i glodanje, Zat varanje tolerancija - lanci mjera, PEĆI ZA TERMIČKU OBRADU ZAŠTITNE ATMOSFERE PEĆI ZA TERMIČKU OBRADU SA ZAŠTITBNOM ATMOSFEROM NITRIRANJE,CEMENTACIJA, POBOLJŠANJA, ŽARENJA, CARBONITRIRANJE NITROKARBURIRANJ ...

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.35 m -water cooled -Transport dimensions: 640/540/H120 mm -Weight: 4.8 kg

MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction -Length: 4.25 m -water cooled -Transport dimensions: 600/500/H130 mm -Weight: 4.8 kg

1903 ASA Aspirator Rated volume flow 1900 m3/h Low pressure max. 1700 Pa Filter area 1.92m2 Chip collection volume 110l Suction nozzle diameter input 203mm Suction nozzle diameter output 2x 100mm LxWxH 1000 x 500 x 2100mm Weight 39kg Engine 400V 50Hz 1.5kW G&STÜ-5128193

ABS 3880 Suction system 2 sack ABS 3880 2x300L Suction capacity 3880m3/h 3x100mm 2.3 hp S1/ 3.5 hp S6

Flexible extraction arm for welding smoke filter, welding smoke extraction -Welding fume extraction pipe: flexible -Tube: Ø 325 mm -Total length: 2300 mm -Transport dimensions: Ø 325 x 240 mm -Weight: 5.4 kg

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 590 x 160 mm -Volume flow: m³/h -Dimensions: 790/710/H790 mm -Weight: 104 kg

SAA 902 Aspirator Fan wheel in bucket form Plastic fan wheel and housing Rated volume flow 1200 m3/h Vacuum max. 1100 Pa Suction nozzle diameter 100mm LxWxH 900 x 500 x 1550mm Weight 19kg Engine 230V 50Hz 0.55kW G&STÜ-5923902

Domino Model: DPX1000 digital Fume extraction cabinet Serial: 082236-4051 Domino laser fume extractor cabinet, 1Ph

Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Weibert RLA 125 Clean air extraction system Rated volume flow: 1095 m3/h Minimum volume flow: 884 m3/h Max Vacuum: 2220 Pa Chip collection volume max.: 255 ltr. Engine power: 2.2kW Connection 50Hz: 400V Weight: 194 kg Dimensions in mm: 1100 x 830 x 1650 Suction nozzle diameter: 125 mm Height lower edge suction nozzle to the ground: 850 mm Max sound pressure level 73 db (A) G&STÜ-5131250

Key data: 120 mm

BEKUM BA 200 extrusion blow moulding machine – 500 kg/h – 8L accumulation head For sale: Bekum blow extrusion machine model BA 200, ideal for PE processing and manufacturing of large-capacity blown parts. Key features • Brand / Model: BEKUM BA 200 • Year: 1990 • Type: Accumulator extrusion blower • Accumulation head: 8 Liters • Number of heads: 1 • Number of stations: 1 • Processed material: PE • Production capacity: up to 500 kg/h • Number of extruder: 1 • Screw diameter: 120 mm • L/D Ratio: 24 • Thickness Control: Yes • Material feed included Closing unit • Opening stroke: 710 mm • Clamping force: 800 KN • Plate dimensions: o Length: 1600 mm o Width: 600 mm Robust machine renowned for its reliability, suitable for different types of extrusion blow molding production. Machine visible on site. Additional photos can be sent on re ...

ABS 2480 Aspirator N E U MASCHINE ! Suction system ABS 2480 400V 2 hp 300 L chip sack Suction capacity of 2480 m3/h 2 100 intake connections Weight 51 kg METAL WINGS! Driving equipment! G&HM-ABS2480

vertical design, for simultaneous extruding of 4 strands, Sausage masses, etc. each strand with a diameter of approx. 15 mm, Capacity approx. 15 l, Drive 1.5 kW

The plant is not a simple recycling extruder plant, but a complete plastic recycling line consisting of: Heysohn PAR 108 Agglomerator/Compressor (1993) Heysohn extruder with degassing Material feeding and dosing Discharge/conveyor technology Documentation available Multi-zone heating (at least 9 heating zones recognizable) Vacuum degassing 60 kW main drive RAVIS 2 modular controller Machines obviously still completely assembled On the control panel you can see handwritten: Extruder type: probably PAR 108 Diameter: 130 mm Extruder capacity: approx. 345 kg/h Engine power: 135 hp The plant seems to have been used for the processing of film and plastic regrind into granules. Battenfeld BFX2-130-25V Plastic Extruder – Year of Manufacture 1999 For sale is a plastic extruder from Battenfeld Extrusionstechnik GmbH, type BFX2-130-25V, built in 1999. T ...

Dust Extraction Plant Manufacturer: Nestro Year: 1991 Filter unit: Filter hoses: 121 pcs.(arrangement 11 x 11) / D230 x 2600mm Filte surface 261 m2, Filter material: category G Automatic motorized vibration cleaning / 4 motors Fire-extinguishing ducts Return air system Fire damper Pipes, Pipe bends Ventilators: Ventilators 3 pcs. a 7,5 KW, D 350mm Ducting, Ducting bends, ducting shutters with chains Control unit Nestromat 3 x Transducer coils for start automatic: 15 x

This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing and sheeting Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65mm+80mm+65mm Infrared heaters 3pcs plate filters Head: 3 Layer blown film Die head TE5303-IBC-350/500 Dies diameter 350 and 400 mm IBC The Gap: 1.8 mm Output: Up to 800 kg/hour depending on material formulation Air ring: Dual flow air ring carbon fibre Take off: Take off 2400 mm wide Oscillating nips Motorised side gusseting Rewind: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reels diameter up to 800 mm Winding width 2350 mm Accessories: T ...

Ceiling filter 160 B 10x10/20/101 - motorized shaking, 0.18 kW - Filter area 100.5 m² (BGIA Cat. G) - Filter 2000 x 160 mm, 100 pcs. - Extinguishing device - Weight 520 kg - Dimensions. 1,950 x 1,970 x 2,450 mm Chip keeper SPB2020 - Volume approx. 2.7 m³ - Dimensions 2 x 2 x 990 mm - Discharge screw - Agitator - Gear motor 1.5 kW Centrifugal fan S300 F/L2 11.0 kW - Nozzle-Ø 300 mm - Vol.Strom 5.300 m³/h, 4700 Pa - Protection class IP54, pos. GR 270 Fan 7,5 KW switchboard - Star-triangle circuit 11 kW - controls both fans and 1 x motor. Shaking All information is subject to the actual equipment

RLA 210 Clean air dedusters Metal fan wheel Inspection opening for cleaning the bypass filter manual cleaning Extraction of wood chips Not suitable for grinding dust mobile very quiet High extraction performance with small footprint Suction nozzle 200mm Nominal volume flow 2262 m³/h Volume flow max. 3700 m³/h Negative pressure at Vnenn: 2482 Pa Filter area 22m² Dust class M Residual suction content H3 Chip drum volume: 2x165l LxWXH 1755 x 830 x 1800mm Motor 3kW 400V 50Hz Weight 259kg G&STÜ-5132100

volume capacity: 2500 m3/h 0: 3000 mm total power requirement: 1,1 kW weight of the machine ca.: 0,08 t dimensions of the machine ca.: 0,58x0,58x0,58 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 120 mm screw length:: 17D screw speedl:: 42 U/min drive power:: 138 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.