extr used for sale

General SKU435U1404 LocationBarneveld MakeKrupp werner & pfleiderer Sizes Screw diameter25 mm Main Features Motor21 KW Inlet diameter80 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Number of hours32473 Screw diameter25 mm L/D20 Co-rotatingcheck Number of heating zones:7 Water coolingcheck Screw speed200-1200 rpm Feeding with hoppercheck Feeding with metering screwcheck brabander. 0,37kW, 119rpm, screw dia 35mm Capacity100 kg/h MaterialNitriding steel 1.8519 Information TypeZSK 25 P8 2E WLE Mach.No.20474223 Year of construction2000 With switchgearcheck (as is) Floorspace2,1 x 0,8 m Total height1,6 m Weight1100 kgDouble screw extrudersWerner & PfleidererExtruders > Double screw extrudersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready ...

General SKU354T1381 MakeHosokawa Bepex GmbH LocationBarneveld TypeBX 200 T Main Features Motor3 KW Inlet diameter120 mm Specified Features - Mixing extruder Granulatorcheck Rotor granulatorcheck Rotor sizesDia: 200x50 mm Ring diecheck Die sizesDia: 200x55 mm Number of dies available:2 Die perforationDia: 2mm (4x), Dia 1,5mm(2x), 1,2x6mm Motor3kW, 220-240/280-420Volt, 1430 rpm With pre-mixercheck With motor1,5 kW, 220-240/380-420 Volt, 1400rpm InletDia: 120 mm (2x) Mixing extruders MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Information No.18227-01 Year of construction2009 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck(as is) Floorspace1,3x1,05 m Total height1,75 m Weight680 kgMixing extrudersHosokawa BepexExtruders > Mixing extrudersBrand > Hosokawa Bepex What you can expect from Foeth: -- Machine ...

General SKU269X293 MakeCollin TypeTeach-line E20T and BL50T No.9120 3914 Year of construction2014 LocationBarneveld Main Features Motor9 KW Inlet diameter30 mm L/D25 Specified Features - Single screw extruder MaterialStainless steel Single screw extrudercheck Screw diameter20 L/D25 Number of heating zones:2 Electric heatingcheck Air coolingcheck DC-motor1,1 kW, 400 volt, 1400 rpm Feeding with hoppercheck Max. temperature300°C Information With switchgearcheck Floorspace0,85x0,65 m Total height0,70 m Weight100 kg CEcheck Extra SpecificationsWith Teach-line film blowing line, type BL50T, dia. Take off rolls, 50 mm, roll width 200 mm, max bubble dia. 110 mm, speed 13 m/min, : winder dia. 52 mm, max pulling force 95N, max coil dia. 300 mm : Single screw extrudersCollinExtruders > Single screw extrudersBrand > Collin What you can expect from Foeth: -- Machine is ...

CDM PREALPINA REGRANULATING LINE 130 mm 2xdegassing, for PE PP PS PP PC ABS (it has been working with clean scraps only), extruder with 130 mm. screw Ø 40L/D, including buffer silo with agitators, horizontal extraction screw, crammed feeding unit synchronized to extruder screw, a.c. 283 kw drive, n.2 degassing pumps, semi-automatic screen changer 230 mm diam.screens , water ring pelletizing unit, stainless steel drying centrifuge, vibrating screen, electric cabinet, blower + pipings, vertical mixer, machine reconditioned, can be fitted with a [FIMIC RAS](.germanplast/listings/5241333-refurbished-fimic-ras-400-automatic -screenchager-reconditioned) fully automatic screenchanger, installed power - used power in work: about 60-65% : 435, capacity: 500-600 kg/h, availability: 5 weeks time, options available: fully automatic screenchanger, conditions: refurbished, type: double degassing for ...

General SKUR1061 MakeKrupp Werner & Pfleider TypeZSK 50 P8.15E Mach.No.20474395 Year of construction2000 Sizes Screw diameter45 mm Main Features Motor51 KW Inlet diameter50 mm L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter45 mm L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck DC-motorcheck Feeding with hopper(3x) Feeding with metering screwcheck MaterialStainless steel 1.2379 (X153 CrMoV12) Information LocationBarneveld With switchgear(2x) Sizes switchgear0,9x0,6x2,1 M (1x) 1,6x0,6x2,1 M (1x) Floorspace4,7 x 1,1 m Total height1,5 m Weight4000 Kg Extra SpecificationsWith twin screw side entry Werner &: Pfleiderer ZS-B 58 with 3 x K-tron dosing screws including funnels including 2x vibrating chute and including Bredel hose pump SP / 32 Double screw extrudersW&PExtruders > D ...

General SKU292M349 MakeBerstorff TypeZE-25 Mach.No.EO 0324/88 Year of construction1989 Main Features Motor6 KW Inlet diameter25 mm L/D20 Specified Features - Double screw extruder Double screw extruder(1x) Screw diameterdia. 25x500mm L/D20 Number of heating zones:3 Electric heatingcheck Water coolingcheck DC-motor6 KW, 200 Volt Screw speed0-450 Rpm Feeding with hoppercheck Feeding with metering screwcheck Information LocationBarneveld With switchgear( as is ) Sizes switchgear0,8x1,0x2,0 M Floorspace1,8x0,8 M Total height1,1 M Weight450 KG Extra Specifications incl. tempereer eenheid 3,5 KW, 380 Volt. THERE ARE NO SCREWS WITH THIS MACHINE !Double screw extrudersBerstorffExtruders > Double screw extrudersBrand > Berstorff What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destina ...

General SKU300P748 LocationBarneveld CEcheck Main Features Motor3 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours567 Screw diameter50mm L/D20 Co-rotatingcheck Number of heating zones:1 Steam heatingcheck Water coolingcheck AC-motor3,0 KW, 230/400 Volt With variable speed drivecheck Number of temperature controllers:1 Used onicecream MaterialStainless steel Information MakeAPV Baker Industrial Extruder Division Ltd (UK) Mach.No.WEF960037 724/1 Year of construction1996 With switchgearcheck Floorspace2,6x1,2 M Total height1,6 M Weight1100 KG Technical specs Extra informationscrews form stainless steelDouble screw extrudersAPV ProductsExtruders > Double screw extrudersBrand > APV Products What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- ...

General SKU304P676 MakeAPV Chemical Machinery Ltd TypePGX 30 Mach.No.800471 Year of construction1989 Main Features Motor4 KW Inlet diameter30 mm L/D10 Specified Features - Double screw extruder Double screw extrudercheck Number of hours19187 Screw diameter30mm L/D10 Co-rotatingcheck Water coolingcheck AC-motor4,0 KW With variable speed drivecheck Screw speed(161rpm) Feeding with hopperdia.340mm x400mm Feeding with metering screwK-Tron T-22 twinscrew, Motor feeder 0,55 KW, Motor agitator 0,18 KW Number of temperature controllers:1 Capacity30 KG/Hr MaterialStainless steel 1.2379 (X153 CrMoV12), Stainless steel Information LocationBarneveld With switchgearcheck Floorspace1,8x0,8 M Total height2,2 M Extra Specificationswith extrudermold dia.1mm Double screw extrudersAPV ProductsExtruders > Double screw extrudersBrand > APV Products What you can expect from Foet ...

General SKUR1123 MakeWLS Gabler Maschinenbau KG (D) LocationBarneveld TypeDE 100/100 Main Features Motor18.5 KW Inlet diameter100 mm L/D9 Specified Features - Double screw extruder MaterialStainless steel Double screw extrudercheck Screw diameter100mm L/D9.4 Co-rotatingcheck Number of heating zones:2 AC-motor18,5 kW 380/660 Volt Feeding with hoppercheck Information No.12482 Year of construction1992 With switchgear( as is ) Floorspace2,5x1,3 M Total height1,7 M Weight2150 Kg Extra SpecificationsIncluding 1 piece Single Temperiertechnik heating units STW 150 / 1-9-20-K1S 9 kW 400 Volt including 2 spare screws Double screw extrudersWLS GablerExtruders > Double screw extrudersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

General SKU357X1336 LocationBarneveld MakeBuss AG Main Features Motor49 KW Inlet diameter79 mm L/D17 Specified Features - Mixing extruder MaterialStainless steel 1.4000 (410S) Single screw mixing extrudercheck Screw dia.69,8 mm L/D17 With heating zonescheck 3x Electric heatingcheck With jacketcheck DC-motor49 kW 460 V 2710 rpm Screw speed300 rpm Inletø 79 mm Feeding with hoppercheck Buss ELS 70 Feeding with metering screwcheck 63 rpm Information TypeMDK70-17D Mach.No.942500 Year of construction1988 Floorspace2 x 0,85 m Total height1,8 m Extra SpecificationsWith 3x temperature control units: Heating medium: thermal oil, electrically heated Max. temp.: 300 °CMixing extrudersNew arrivalsBussExtruders > Mixing extrudersNew arrivalsBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for  ...

General SKU288P487 MakeWerner & Pfleiderer GmbH (DE) TypeZSK 70 F175E Mach.No.230 196 Year of construction1990 Main Features Motor80 KW Inlet diameter70.5 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter70,5 mm L/D15,3 Co-rotatingcheck Ventedcheck Number of heating zones:3 Electric heatingcheck 7+7+5 kW Water coolingcheck DC-motor80 kW (1500 rpm) Screw speed300 rpm Used onpowdercoating MaterialMild steel Information LocationBarneveld With switchgearcheck (as is) Floorspace4,0 x0,9 m Weight5700 kg Extra Specifications- Gearbox ratio 5:1 - Including GWK Watercooler Double screw extrudersW&PExtruders > Double screw extrudersBrand > W&P What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect ...

Manufacturer: Macchi Year of Manufacture: 2012 Machine Type : 3-layer co-extrusion blown film line Condition: Good working condition, currently in production Materials LLDPE, LDPE, LLD, HDPE Extruders - Configuration: 65 mm + 80 mm + 65 mm (3 extruders) - Heaters: Infrared - Filtration: 3 plate filters Die Head - Type: 3-layer blown film die head - Reference: TE5303-IBC-350/500 - Die diameters available: 350 mm and 400 mm - Die gap: 1.8 mm - Internal Bubble Cooling (IBC): yes Output - Maximum output: up to 800 kg/hour depending on material formulation Air Ring - Type: Dual flow air ring, carbon fibre construction Take-Off Unit - Take-off width: 2400 mm - Nip type: Oscillating - Side gusseting: motorised Rewinder - Type: Double winder, fully automatic back-to-back rewinder - Roll change: fully automatic - Maximum reel diameter: 800 mm - Winding width: 2350 mm Accessories ...

LAB FILM EXTRUDER BETOL 2525, for testing granules, single screw extruder, screw Ø 25 mm, blown film die head 60 mm., 3,0 kw d.c. motor and drive., 4 heating zones on barrel., 2 die head heating zones, cooling on screw and throat, calibration cage, nips and rolls, tower, 500 mm wide double collection frame, control panel, type: lab extruder

Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt

Air tube bundle extractor, air tube bundle assembly station for heat exchangers, cooling coil, cooling pipe, cooling spiral, tube bundle heat exchanger -Handover: in its current condition as inspected (without documentation) -Condition: Diesel engine currently out of service -Air tube bundle extractor: Hydro-Extractors INC -Type: 504- Diesel -Dimensions: 8400/1900/H2850 mm -Transport dimensions: 8400/1900/H1700 mm -Weight: 6860 kg

CDM PREALPINA 500-600 kg/h, Materials PE PP PC PS ABS PA, extruder with 130 mm. screw diam. 35L/D, a.c. 283 kw drive, Constructed in 2013, crammed feeding unit, extruder 130 mm., one degassing pump 5,5 kw, fully-automatic screen changer FIMIC RAS 400, water ring pelletizing unit, drying centrifuge, heat exchanging unit, vibrating screen, electric cabinet, machine offered reconditioned, installed power - used power in work: about 60-65% : 435, availability: Subject to unsold, conditions: Totally reconditioned, options available: Fimic or non stop screencganger + buffer silo or loading screw+hopper + crammed feeder with buffer silo synchronized with horizontal screw, used power in work: 280 kw, cooling: 13.400 Kcal/h, MATERIALS: PE PP PC PS ABS EPS XPS EPP, delivery time: 30 days ca

General SKU321S566 MakeWLS Gabler (D), Pressquick PQ 12 LocationBarneveld TypeE-60/10 D Main Features Motor3 KW Inlet diameter345 mm L/D3 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter60mm, Screw length 180mm L/D3 With jacketcheck AC-motor3.0 kW, 220/380 Volt With variable speed drivecheck Screw speed9-89 Rpm Inlet345x250mm Feeding with hopper- incl. mixer MaterialStainless steel Information No.12355 Year of constructionUnknown With switchgearcheck Floorspace1.8 x 0.7 M Total height1.35 M Weight560 Kg Extra Specifications: Without die plate Single screw extrudersFood additivesWLS GablerExtruders > Single screw extrudersIndustries > Food & Feed > Food additivesBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

bag width 80 - 260 mm bag length 160 - 450 mm Available: sofort

Colmec Italy 150mm dia coldfeed extruder, roller feed - 200mm wide, Screw length 2000mm, L/D ratio 13:1, with simple Spaghetti die/cutter assembly, jacketed barrel and cored screw for temperature regulation (no TCU's included). with 100HP, 1750rpm, 575V, 3ph, 60Hz AC motor (ex Canada) and controls. Fabricated bedplate. Screw height: 620mm. In very good condition.

Francis Shaw Extruder Screw diam. 100mm (4?) LD ratio 10:1 Roller Feed Brush DC Motor 100HP motor 1500rpm 460 volts Variable speed drive Complete with Control Panel

EXTRON L610 CNC vertical machining center was built in 2008 in Taiwan. Distinguished by its extensive machining capabilities, high precision and reliable components, the machine is ideal for every production facility, even during the most intensive and demanding challenges. The high-quality design with sliding doors additionally efficiently dampens any vibrations and ensures maximum process stability. The EXTRON L 610 milling center machines workpieces on a large T-slot table using reliable tools placed in a 20-position head and a powerful spindle rotating at a maximum speed of 8000 rpm. All process parameters are programmed in the intuitive FANUC Series 0i-MC CNC control with many useful features that minimise the operator’s need to operate the machine. The EXTRON machining center weighs 5750 kg. Technical data of the EXTRON L610 CNC milling machine - CNC controller: FANUC Seri ...

Various MAAG pump E.g. Extrex 90, 70, 56, and 36 Reconditioned available from stock in Wuppertal. more details on request

Collin 3 zone Extruder 150degC max temperature with transformer

Bainite (India) model BMPX150 PIN type cold feed extruders, Year of manufacture 2013 Screw diameter: 150mm L/D ratio 16:1 Output: 1200 - 1500kg/hr Power roller feed (opening 175mm), provision for cooling, Screw speed: variable max 50rpm, Max operating pressure: 340bar (5000psi) 10 rows of 8 pins (80 total) With 210kW Siemens AC v/s motor through 28:1 reduction gearbox (service factor 1.75) Hinged extrusion head with C'clamp suitable for strip All mounted on a fabricated steel base Complete with electrical controls and VFD (Siemens make). Safety features as per European standards.

1250 MT Presezzi Brass Rod Oil Hydraulic Extrusion Press Line w/ OCN Handling System (New 2009) MANUFACTURER – PRESEZZI YEAR – 2009 SERIAL NUMBER – 2671-2009 PRESS TONNAGE – 1250 MT WORKING PRESSURE – 260 BAR BILLET DIAMETER – 145MM BILLET LENGTH MAX – 650MM MAIN CYLINDER (SINGLE ACTING) WORKING PRESSURE – 260 BAR RAM DIAMETER – 760MM POWER – 1149 MT SIDE CYLINDERS (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM THRUST FORCE DURING EXTRUSION – 107 TON THRUST FORCE DURING RETURN – 65 TON TOTAL MAIN CYLINDER AND SIDE CYLINDER TRUST FORCE – 1256 TON CONTAINER MOVEMENT (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM SEALING FORCE AT 300 BAR – 107 TON OPENING FORCE AT 280 BAR – 65 TON SHEAR CYLINDER (DOUBLE ACTING) OPERATING PRESSURE – 26 ...

table length: 1200 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 521 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 554 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Iddon Extruder Screw diam. 38mm (1.5”) Motor: Reyrolle AC 11/2.2HP 220-250 380-440 volts 1500/300rpm 29/16.5amps Continuous rating

table length: 3000 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 1075 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm weight: 1425 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 392 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi - Automatic Butter Extruder and Shaping Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Manufacture : Dairy Machinery UK Model : DMUK EXSH1 Usage : Butter Extruding and Shaping Machine Shapes : Various Shapes and Sizes Condition : New Warranty : 12 months Spare Parts : Dairy Machinery UK

table length: 1500 mm table width: 1000 mm table height: 200 mm bore: 28 mm weight: 913 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 980 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extruder for food products. producer: model: MU A14342 machine performance: 1200 kg/h year: 2017

Stick electrodes 4.0 x 450 -Type: Extra EY 42 53 Mn B -Price: per package -Number: 29 packages available -Weight per package: 5.4 kg

Various control units for video and audio systems consisting of: 5 pieces Extron Amplifier XPA - two channels 100 W 1 piece Extron SW VGA - VGA/Audio Switcher 4 pieces Extron MLG 228 - media control units 1 piece FURMAN PS-SRE Series II Power Contioner + Sequencer 3 Pieces Extron MP8 Series 8 Media Presentation Switcher 4 pieces Panasonic beamer PI-F200 NTE with remote control 6 pieces 19" wooden racks 10U and more 4 pieces Fohn wall speaker Only for sale as a package

table length: 3000 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 1,5 t dimensions: 3,0 x 1,5 x 0,9 m Welding table SIEGMUND Professional Extreme 850 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,99 t dimensions: 2,4 x 1,2 x 0,9 m Welding table SIEGMUND Professional Extreme 850 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg

Controls:KUKA KRC 4 WORKING RANGE -ROBOT-:. - capacity:120 kg - Reach:2896 mm - Number of controlled axes:6 ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz DIMENSIONS / WEIGHTS:. - total weight approx.:1084 kg

CNC unit for corner notching in off-set design Brand: Atemag Type: Function Line Extra 2 Max drive speed 8,000 R.P.M. Max. tool spindle speed 12,000 R.P.M. Gear ratio i = 1:1,48 Turning direction left/right Torque max. 20 Nm Tool interface: Special Attention: price is just valid for standard version

CNC unit for boring and routing Brand: Atemag Type: Function Line Extra with two tool interfaces angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 32 / ER 16 Spindle for omega router/ ER 16

table length: 1500 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,8 t dimensions: 1,5 x 1,5 x 0,9 m Welding table SIEGMUND Professional Extreme 850 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 120 mm screw length:: -- screw speedl:: -- U/min drive power:: 36 kW Condition: used - Specification: Single screw TPE extruder type 120 - second-hand - Screw diameter: 120 mm - Dimensions length approx.: 3.000 mm Width approx.: 1,700 mm Height approx.: 1,900 mm - Output approx.: 215 kg/h - Motor power: 36 kW - Weight approx.: 2,300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2013 Ibarmia ZVH 45/L1600 Extreme 4 axis vertical machining center Type: ZVH 45/L1600 Extreme Manufacturer: Ibarmia Year: 2013 Control: Fanuc X- 1600 mm Y- 800 mm Z- 900 mm Rotation angle +/-105° Maximum spindle speed 12000 rpm Number of tools in the magazine: 24 Work table dimensions: 2000 x 850 mm Included a wall that divides the table into two parts, so it is possible to machine separately in one part and clamp in the other part Machine in good condition, under power. Find more here - / Contact us at -

Andouart extruder

Description TWIN HELIX EXTRUDER Screw Diameter 90 mm L/D 30 Screw Speed 161 rpm Barrel Zones 5 Motor Power 91Kw Motor Speed 1750 rpm Automatic Screen Changer Produced Material PP & PE