140,791 used machines on RESALE, but how to find them? Machine Search
The pack contains an Agilent 2100 Bioanalyzer and a ALLSHENG Auto Pure 32 Nucleic Acid Extractor Auction-ID: A1-51251-11
All Solid Carbide, 10xD to 30xD, Partially New, Weight 2.5kg Auction-ID: A7-51245-3
Buyer must disassemble professionally; fan hangs wall mounted; lot is sold empty Auction-ID: A1-50864-159
Edwards Lifesciences Aquarius – Extrarenal Purification System Manufacturer: Edwards Lifesciences Model: Aquarius Blood Flow: 10 to 450 ml/min Fluid Exchange: Up to 10 L/h Therapies: SCUF, HVCD (HVHF), HVCD, CVVHDF, TPE, hemoperfusion; pre- and/or post-dilution Equipment: Built-in liquid warmer, scales up to 20 L, 10.4\" TFT color display, automated priming, hooks for 4 pockets Condition: Very good pre-owned condition, functionally tested Adult and pediatric treatments. Auction-ID: A1-51275-14
Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, dust collectors, welding fume extractors -Manufacturer: Lincoln Electric, mobile welding fume extraction system type Mobiflex 200-M -Drive: 0.75 kW -Extraction arm: Ø 205 mm x 3930 mm -Transport dimensions: 1520/830/H2510 mm -Weight: 109 kg
The system has been dismantled so far except for the pipeline in the hall. This must be dismantled by the buyer himself. Weight/square meter are estimated. Auction-ID: A1-51321-11
Low profile garage jack Lifting capacity: 3 tons Minimum height: 75 mm Maximum height: 508 mm Lifting system: Double pump Quick-lift system Operation: Pump Handle Version: Low-profile Construction: Heavy-duty steel frame Wheels: Swiveling rear wheels Protection: Rubber Protective Pad Safety: Pressure relief valve Hydraulic system: oil bypass system against overextension Weight: 35.8kg Included: Pump lever Condition: Unused Auction-ID: A1-51368-18
Welding fume extraction arm without posts. Auction-ID: A1-51321-37
Welding Fume Extraction Arm with Post Auction-ID: A1-51321-38
Mobile; equipped with arm; galvanized steel suction pipe; Auction-ID: A1-50707-220
Consisting of: extraction car interior, set of rims, Plastic tubes, radiator car, including all pallets and loose material. Auction-ID: A1-50892-113
New unbraked manual tipper with extra row of aluminium from Kerenzo / dimensions : 262x158 / Comes with certificate of conformity and 2 years warranty / manual tipper with 3-stage piston, head rack, lashing eyes, KNOTT axles, galvanised chassis, number plate holder Auction-ID: A3-46109-6516
New unbraked platform trailer with extra row of aluminum Kerenzo / dimensions: 312x158 / Comes with certificate of conformity and 2 years warranty / head rack, KNOTT axles, lashing eyes, 3 sides detachable and hinged, galvanized chassis, number plate holder Auction-ID: A3-46109-6515
Screw ø 75-36D; approx. 660 kg/h Co Extruder Year 2015
used
Key data: 40 mm, 28
Werner & Pfleiderer ZSK 40 twin-screw extruder – very good condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin screw extruder. Technical data: - Screw diameter: 40 mm - Screw length: 7 housing x 4 D, approx. 28 L/D - Main drive: 34.5 kW - Engine speed: 1,800 rpm - Screw speed: 40-400 1/min - Max. torque per worm shaft: 325 Nm - Electric heating: approx. 17 kW - Cooling: Water cooling unit - Temperature control zones: 6 - Housing temperature measuring points: 6 - Material temperature measuring point: 1 - Material pressure measuring point: 1 Housing configuration: - Inlet housing with liquid addition opening - Open housing with insert and two liquid addition ports - Several closed housings with holes for liquid addition or measuring points - Degassing housing Co-rotating, densely interlocking and self-cleaning screws. High mixing and di ...
used
Key data: 83 mm
Twin screw extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly serviced. Technical details: - Model: ZSK 83 - Screw system: co-rotating twin screws - Engine power: 46 kW - Cylinder: water-cooled - Degassing zone: present - Dosage: included (as in the pictures) - Replacement screw elements: available - Control / control cabinet: good condition, fully functional The plant is ideal for compounding, masterbatch, recycling, polymer and filler applications. The extruder has been overhauled if necessary and has been technically tested. On-site inspection and test run possible by arrangement. Transport worldwide possible. Further photos, data sheets and videos are available.
used
Key data: 30 mm
Twin Screw Extruder / Laboratory Extruder - 2 x 30 mm screw diameter - 4 heating zones - Dosage - Control Used machine, fully functional.
Gebr. 1-bag suction NESTRO Motor power: 2.2 kW (400V / 16A plug) Connection: 160 mm Chassis Height with filter bag in operation: approx. 275 cm
Equipped with: max. static pressure 2,960 Pa, 15 kW motor, 400 V/50 Hz, 26.7 A, 24 VDC control, compressed air connection 5–6 bar, IP20, Auction-ID: A1-47367-1750
Equipped with exhaust motor, filter and wall brackets. Auction-ID: A1-47367-107
Including switch box without extraction motor You are responsible for disassembling this lot yourself. There are no aids available. Steam must be capped off and left safe Auction-ID: A1-47451-264
Featured; Extraction system Auction-ID: A1-47367-2500
ACTEON X-MIND prime 3D REF. W1200005 - (2021-02) Very good condition, valid licenses, operational software X-Mind prime 3D is a lightweight and compact system that will fit in any dental practice. Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA ex ...
Radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Loher ENGV-132SB-04M 5.0 kW 1440 rpm Ex protected -Volume flow rate: m³/h -Connection: Inlet Ø 500 mm -Connection: Outlet Ø 500 mm -Fan wheel: Ø 510 x 220 mm -Dimensions: 1000/750/H1630 mm -Weight: 156 kg
Power: 0.75 kW. Auction-ID: A1-51529-112
Heavy-duty mobile industrial axial fan / ventilation unit, mounted in a steel housing and tubular wheeled frame. Suitable for general industrial ventilation, air circulation or extraction applications. Technical details visible: Type: Mobile axial ventilation / extraction fan Electric motor: 3-phase Voltage: 380/220 V Frequency: 50 Hz Motor output: approx. 0.75 HP Speed: approx. 1,400 rpm Protection class: IP44 Large multi-blade axial impeller Protective steel mesh guard Heavy-duty steel enclosure/frame 4-wheel mobile chassis Industrial power cable and plug Main power switch fitted to unit Auction-ID: A1-51282-49
The PC-100 allows you to pull different types of pipettes with all these settings for output voltage, one-step and two-step draw mode, and draw THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-202
Evolution X230 Extreme TCT steel cutting circular saw, 230 mm / 9 inch, with original carrying case. Portable electric tool with laser guidance system. Auction-ID: A1-51153-57
REF. 84500020-2 THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. A prior exhibition is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by Fedex. See General Terms and Conditions of Sale ...
THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-152
Volume flow 5,860m³/h Suction nozzle Ø 300 mm Filter cleaning automatically Radio control for 30 machines/sliders Motor power 5.5 kW (400V) 3 chip containers
Filter for AD 500 / AD 1000 / AD 1500 / OD 2000 iQ - New - Pre-filter (A1030222) Product no. MA-201040 Price with volume discount Other filters for BOFA extraction systems available from stock
Filter for AD 500 / AD 1000 / AD 1500 / OD 2000 iQ - New - Combined filter A1030297 Item no. MA201041 Price with volume discount possible Other filters for BOFA extraction systems available from stock
Included: Extraction arm Auction-ID: A1-51523-53
unused; Package size 570x120x53cm; 670KG; Impregnated; Planed; Spruce; Pefc; ridge height 375cm; passage height 203cm; Length 560cm; width 560cm; without roofing; Auction-ID: A1-51257-477
Number of dust containers: 3 St. : 200 mm output: 3,7 kw : 2.950 m³/h : 2.200 pa The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 2,2 mm output: 1,68 kw : 2.800 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
With Metabo SPA 1200 extraction. Auction-ID: A1-42990-56
Flow volume: 1200 m3/h. Auction-ID: A1-42990-57
Extruder used for pressing plastic into molds. Includes control box. Auction-ID: A1-42990-107
Capacity: 8220 m3/h. Equipped with 11kW fan. Auction-ID: A1-42990-147
Key data: 80
Year of manufacture 1993 Complete wardrobe DC Motor Plating system in bad condition Complete heating system 7 heating area screw diameter 80 mm, size 275 l. x 145 w. x 80 h. cm
UNILOY MILACRON suction blower type UMA 12 SH EZ SECO2 3D Suction Blower for Duct Production Year: 2010 Materials used: PP, PP-EPDM, TPC Number of hours: 22496 hours Screw diameter (mm): 2 screws Ø60 (23.6L/D) Head - Accumulation volume: MULLER - 792 cm3 Maximum die diameter: 28mm Locking force: 12 tons Tray size: 765x800 mm Maximum mould size: 1140 x 1600 mm Maximum mould weight: 2500 Kg Opening (min/max): 800/1400 mm Machine weight : 19650 Kg Press dimensions (L x W x H): 5.5 x 6.2 x 4m Installed power: 307 KW Average consumption: 50 KW Voltage: 400 volts Frequency: 50 Hz
Single-screw extruder BAUSANO SD 50 – 50 mm, L/D 30 POL-SERVICE Majcher – manufacturer and supplier of plastic processing machines with over 30 years of experience. We offer a BAUSANO SD 50 single-screw extruder, suitable for use in profile lines, pipe extrusion, regranulation and other plastic processing applications requiring stable and precise extrusion. Technical data: -Screw diameter: 50 mm -L/D ratio: 30 -Main screw motor: 45 kW -Main drive motor power: 18.5 kW -Gearbox: Zambello, ratio i = 1:8.05 -Polymer melt pump: YES – stable pressure and output -Number of barrel heating/cooling zones: 5 -Heating power per barrel zone: 400 W -Barrel cooling: air (fan cooling) -Output capacity: approx. 35–45 kg/h (depending on material and process setup) Can be integrated into lines supplied by POL-SERVICE Majcher (profiles, recycling, granulation, etc.) Accept ...
Code: 0513 Brand: AL-KO - GERMANY Model: MOBIL JET 120 - CE Standard Wheeled dust collector for wood dust, for joinery workshops, carpentry workshops, sawmills and other applications – CE Standard Three-phase motor 2,2 Kw Suction inlet diameter 120 mm Air flow rate 1120 m³/h Manual filter cleaning Overall dimensions mm 1085 x 650 x 1974 h Weight kg 100
maximum number of results exceeded
please refine your search
1.000 € 
