extr used for sale

AL-KO POWER UNIT 250 P - Exhibition machine -Pre-separator integrated, automatic extinguishing system integrated---------- Technical data ----------Extraction nozzle Ã: 250 mm, nominal volume flow: 3,534 m³/h, max. volume flow: 4,900 m³/h, max. vacuum: 3,184 Pa, filter area: 22.4 m², chip collection volume: 2 x 250 litres, number of bags: 2 pieces, motor 400 V: 7.5 kW, dimensions (LxWxH): 2,351 x 1,058 x 2,361 mm, sound pressure level: 71 dB(A), weight: 758 kg, after: GS - HO - 07- new exhibition machine -

TECOM BLOWN FILM EXTRUDER, for LDPE-RLDPE blends, Contrex feeding, 2 gravimetric components + 1 volumetric dosing units, Screw diam.70 mm 30 L/D, Rotating head, Low neck, 1.600 mm pull off unit, gusseting unit, Cason corona treatment, single color printer (for marks), 1.600 mm double collection frame, BRA 36+ Eurochiller, working width: 1600, availability: February 2026

TECOM BLOWN FILM EXTRUDER, for LDPE -BIO - RLDPE, Contrex feeding, 2 gravimetric + 1 volumetric components, screw diam. 65 mm.30 L/D, Rotating head, Low neck, pull off unit, gusseting units, Cason corona treatment, single color printing unit (for marks), 1.100 mm. double collection frame, BRA 25+ Eurochiller, working width: 1.100 mm., availability: February 2026, PRESENT CONDITIONS: running and testable

Absauganlage / Extraction System Schuko Duplo S 18 Baujahr / Year 2007 - Serial-No. 1807159 Volumenstrom 2380 m3/h Motor kW 2,2 - A 10,4/6,0 - V230/400 Hz 50

PVC PROFILE EXTRUSION LINE EVC BRAND, single screw extruder with 60 mm 28 LD, constructed in 1998, for 180 mm max width, 44 kw drive, control panel, Calibrating desk 3,7 m.long with 1 x 9 kw.pump, Caterpillar pull off unit, 180 mm wide, saw, 6,0 mt.long discharging table.

Key data: 63 mm, 1300

Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Serial No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-rigid profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 k ...

CINCINNATI-MILACRON TWIN SCREW EXTRUDER, for PVC profiles, extruder with 2 x 45 mm conical screws, average production 100 kg/h, 14 kw drive, for profiles with max width 250 mm., calibration desk with 2 pumps x 5 kw, caterpillar pull off unit, contact length 1500 mm, width250 mm., planetary saw, collection table, installed power - used power in work: about 60-65% : 14, capacity: 100 kg/h ca, screws: 45 mm. conical

MARIS TWIN SCREW EXTRUDER, Loading hopper for regrinds, Barrel with 2 x 92 mm screws 40 L/D, co-rotating parallel screws for polyolefines, CEAR d.c.motor, N.2 vacuum degassing pumps, 4-plate semi-automatic screenchanger, hydraulic pack, Average throughput rate around 1 Ton/h, Water ring pelletizer, drying centrifuge, Electrical control panel, The machine is offered as is or checked

TECNOVA EXTRUSION LINE, for PE PP PC PS ABS, BUFFER SILO, screw conveyor, CRAMMED FEEDING UNIT, extruder with 130 mm. screw, 37 L/D, n.1 degassing pump, 200 Kw.a.c.drive, semi-automatic hydraulic screen changer with 220 mm Ø screens, hydraulic power station, water ring pelletizer, drying centrifuge, vibro-classifier, constructed in 2019, the line is offered AS IS or RECONDITIONED, -----------------------------------------------------------, This line can be integrated with, ENGINE PLAST GRANULATOR (in photos), type BA 1.000.550.3, 75 kw drive, 12 mm screen (or bespoke), blower to scrap silo of extrusion line, installed power - used power in work: about 60-65% : 200

MARIS TWIN SCREW EXTRUDER, Barrel with 2 x 92 mm screws 40 L/D, n.2 vacuum degassing pumps, co-rotating parallel screws for polyolefines, complete with 4-plate semi-automatic screenchanger, hydraulic pack, Average throughput rate around 1 Ton/h, Water ring pelletizer, drying centrifuge, electric cabinet, The machine is offered as is or reconditioned

A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible.

Key data: 42 m²

Extraction system Filter system Spänex Model ADDITOR U Type II + III – VU – 15 – SBU 165 – S2 – 000 Order number 40132/93 Built in 1993 Filter area 42 m² Filter bag material needle felt, in very good condition Capacity 64,200 m³/h 5 chip collection containers each 165 litres Motor vibration With heat return air duct Fire Extinguishing Line With control cabinet With documentation and circuit diagram With fan 7.5 kW Pipe connection diameter on the fan 300 mm Dimensions of the extraction system Frame with container Overall height 2971 mm Overall width 980 mm Length of the extraction system approx. 3600 mm Plus add-on parts The plant has already been dismantled and Ready for loading from stock

PRT EXTRUDER for PE PP PC PS ABS, Extruder with 85 mm screw, 30 L/D, 60 kw d.c.Siemens drive 2.200 rpm, Average throughput rate 200 kg/h, depending on materials and feeding rate, Total heaters power 38,6 kw, N.1 vacuum degassing pump, manual screenchanger 120 mm, water ring pelletizer, electric cabinet to be reconditioned - drawings available, New in 1999, availability: READY

MARIS TWIN SCREW EXTRUDER, Type TM 85 LC 37 L/D, dosing unit for granulated materials, barrel with 2 x 85 mm co-rotating screws 37 L/D, max screw rpm : 152, vacuum degassing pump 4,5 kw drive, Present capacity 450 kg/h depending on materials and feeding rate, 64 kw drive, Constructed in 1992, offered AS IS or reconditioned, installed power - used power in work: about 60-65% : 64, screws diam.: 85 mm. 37 L/D, screws: co-rotating

BATTENFELD EXTRUSION LINE FOR PVC, EVA,.., including:, PAPENMEIER MIXER, type TSEH 200/KMSU 400 L, construction year 1991, Electrical power heating 30/35 kw - Cold 6,0/7,5 kw, including supporting structure, Total dimensions LWH : 2.4002.6502.550 mm., Weight : about 3.000 kg., BATTENFELD EXTRUDER, metal detector, feeding unit, barrel with screw 150 mm., 7 heating areas, 5 cooling fans, Assea 110 kw Drive, vacuum degassing pump, screenchanger 2x 90 mm.Ø, heating 4,0 kw, Gneuss temperature probes, hydraulic power station 2,3 kw, air pelletizer, variable speed, self adjusting knives, 1,5 kw drive, adjustable pressure, extra (Bausano cutting system with inverter), pellets cooling unit, vibrating screen with one air turbine on each side, Constructed in 1989, Documents available, offered AS IS WHERE IS or CHECKED., CUTTING: AIR

CDM PREALPINA USED EXTRUSION LINE, for HDPE LDPE LLDPE PS PC ABS PP, nominal throughput rate 240-320 kg/h (depending on material and feeding rate), Total installed power 104 kw ca 380 V 50 H 3Ph (65% used in work), including:, scrap silo with extraction screw, crammed feeding unit, extruder with heaters and vents, fitted with a 85 mm Ø screw 35 L/D, vacuum degassing pump, semi-automatic non-stop hydraulic screen-changer complete with hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet, CE compliance, User’s manuals, Electrical drawings, This line is offered fully RECONDITIONED, availability: about 10 weeks from confirmation, capacity: 240-320 kg/h, INSTALLED POWER: 104 kw

We are offering for sale a complete XPS foam sheet extrusion and coating line, consisting of the following equipment: 1. Davis-Standard Extruder System Model 1: 100MM35 - HP Capacity: 257 HP - KW Capacity: 192 kW - Gear Ratio: 17.39 - Extruder RPM: 100 - Mfr Date: 09-2007 - Dyn Thrust Capacity: 408,300 lb / 185,204 kg - Oil Fill: 23 liters (6 US gal), ISO VG 150 Model 2: 130MM45T - HP Capacity: 400 HP - KW Capacity: 298 kW - Gear Ratio: 17.49 - Extruder RPM: 100 - Mfr Date: 09-2007 - Dyn Thrust Capacity: 690,000 lb / 313,000 kg - Oil Fill: 45 liters (12 US gal), ISO VG 150 S-Wrap Unit - Model: S-WRAP - Mfr Date: 08-2007 2. LEWA High-Pressure Metering Pump (x1) - Designed for Isobutane - Adjustable stroke head for low % addition - Triple heads LDD3 LEWA diaphragm metering pump - Digital flow meter for injection rate (kg/hr) - Pressure indicators at pump inlet & outlet 3. Dosing  ...

PLC CONTROLLED MIXING, BAG FILLING AND WEIGHING SYSTEM, for plastic granule, customized to the project, including [vertical mixers](.germanplast.eu/it/annunci/4309783-vertical-mixers-from-5-to-3 0-m3), buffers,, pneumatic system with deviators, cyclones, .., with and without loading screws, loading cells, digital display, visual and sound alarms, all managed by a PLC

Beck Wand 1000/2000 Extraction Wall Extraction wall Type: Beck Wand 1000/2000 Extraction wall made of sheet steel, with 5 suction slots made of perforated sheet metal evenly distributed. For connection to a central extraction system via a suction nozzle at the top center of the extraction wall. Cleaning opening can be unscrewed at the bottom of the front of the wall. Uses: Extraction of process air during grinding and milling Extraction of gases and light dust Extraction of powder mix or other stationary dust-forming processes Width: 1000 mm Height: 2000 mm + 100 mm nozzle Depth: 300 mm Suction nozzle: NW 250 top center Recommended extraction capacity: 3000 m3/h Paintwork: RAL 5018, RAL 7032 Weight: approx. 75 kg Manufacturer's price: 2970,-€ More items - new and used - can be found in our shop! International shipping costs on request!

FBM plastic extruder with Ø 120 mm spindle and underwater head cutting. Ideal for recycling and granulation lines. Brand: FBM (Falzoni) Model: ETF 120 V 380/5L Motor: 200 kW (270 hp) L/D ratio: 35 Underwater cutting (PRT, 2006) Includes: force-fed silo Extras: degasser and filter changer Year: 1988

Key data: 35 mm, 25 , 103 U/min

Used extruder 35mm - 25 l/d with 5.6 kW drive 3-zone auger 3 heating/cooling zones on the cylinder + 1 tool zone Mass pressure sensor 500 bar All machine cables designed to be plugged in Control cabinet with main switch, motor controller, mass pressure indicator and 4 pieces of temperature controller Function-tested

GREINER double-strand calibration table getCAL 11.2-5P/4Z - DUAL A (2008) Clamping table (L / W / H): 2 x 11,170 / 2 x 380 / 940 – 1,040 mm Rail spacing: 2 x 320 mm Center Distance Dual: 500 mm Clamping width (max.): 400 mm Height adjustment: 100 mm Side adjustment: (+/-) 15 mm Longitudinal adjustment: 750 mm Tilt adjustment: (+/-) 10 mm 5 vacuum pumps á 4.6 kW incl. 50 ABA 1/2'' vacuum connections 4 cyclone pumps á 1.1 kW Dimensions (L x W x H): 11,200 x 1,580 x 1,200 mm incl. calibration & water tanks GREINER Double Strand Fume/Saw Combination getCOM 30/9-235-S/500 (YOC 2008) Max. profile dimensions (W x H): 235 x 140 (per side) Contact length tracks: 2 x 2,300 mm Number of cleats: 2 x 55 pcs. Lug width: 235 mm (per side) Pull-off force max.: 30 kN (per side) Pull-off speed: 0.5 - 10 m/min Extrusion height adjustable via machine feet: 1,040 – 1,140 mm Saw ...

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial-No.: 637 Contact length., effective: 1600 mm Gum pad width: 180 mm Design: smooth gum pads at the bottom and top Haul-off force: approx. 20,000 N Haul-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm (LxWxH) Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.

Substation for dust extraction "COLLAVINI" - used - Fan with 7.5 kw motor - 64 filter bags - Sleeve diameter 200 mm - Sleeve length 1700 mm - Estimated max filtering capacity 10,000 m3/h (current fan about 6000 m3/h) - Vibrating filter bag cleaning system - CE compliant N.B. the unloading, instead of bags or augers, has been adapted to feed a briquetting machine

NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts an ...

STEIN Maschinenbau Profile Guillotine PT1-200 For glazing beads, small profiles, main profiles and technical profiles Max. cutting width: 190 mm, max. cutting height: 120 mm Extrusion speed: up to max. 10 m/min Blade length: 600 mm Length accuracy: +/- 2 mm Knife stroke: 180 mm Cutting speed infinitely variable Pneumatic quick-change device for knives Hold-down device pneumatic Knives are preheated: 80ºC - 160ºC Cycle time: 1.5 to 4 sec. adjustable on the display Infeed side: unit for applying a protective film to the profile Control: Compact PLC Siemens S7-613C Dimensions: Height: approx. 1,900 mm, extrusion height: 1,100 mm (+/- 50 mm height adjustment) Footprint: approx. 1,450 x 800 mm (without inlet and outlet tunnel) Condition: very good, ready for use

Centrifugal fan NICOTRA - Gebhard type P2M-M3M4J-RRB-ATEX RD/0Fabr. No. 318844/626052/1 Year of construction 2008Volume flow 10000 m³/h = 166 m³/min. Pressure p 1.2 kg/m³Air inlet 500 mmAir outlet 450 x 450 mmEngine speed 1435 rpm. Motor power 4 kWNet connection 400 Volt 50 Hz- Fan wheel with 8 fan blades- Directly flanged drive motor- Mounted adapter ring with flex sleeve 500 mm- Adapter flange for air outlet from rectangular flange 450 x 450 x to 500 mm- Galvanized

KAUTEX KCC30 Extrusion Blow Molding Machine / Extruder Year: 2012 Number of operating hours: 33000 hours 1 position Robot Kautex Clamping force: 300 KN Screw diameter: 90 mm 4 KG Accumulation Head (HDPE) Tray dimensions: 530 x 700 mm Distance between trays: 1000 mm Maximum mold dimensions: 870 x 650 x 765 mm Command: Blow command Head Type: Vertical Head with Hydraulic Accumulator Maximum container volume: 30 litres Die diameter: 90, 150, 170, 190 or 220 mm Maximum pressure: 220 bar Air consumption: 95 M3/h Air pressure: 6 - 10 bar Installed power: 20 KW Number of temperature zones: 5

CINCINNATI PROTON 45-30G Attention: Machine in left-hand version Screw diameter: 45 mm, L/D = 30 Grooved catchment zone Motor (DC drive): 65 kW Screw speed: max. 320 rpm Tool zones: 4+1 for adapters Melt pressure & temperature sensor included EXcPRO-NT control incl. CAN bus for data communication Air conditioner for control cabinet Cylinder in bimetal design – condition: very good Screw with few operating hours – condition: very good Without material funnel & without adapter

Twin-screw extruder, corrotating, brand: OMC, type: EBV 31/32D, year: 2001. 31 mm Ø composable spindles. Book-type shirt. 11 Kw motor with water-cooled variator and wire head. Total installed power: 25 kw

A complete extrusion line with a Reifenhäuser extruder and a gravimetric system Plast-Control (2006) is available. 1) Unwinder 1. 2) Primer unit and hotmelt unit for water-based adhesive lamination. 3) Dryer. 4) Unwinder 2. 5) Dolci extruder for extrusion lamination. 6) Unwinder 3. 7) Two printing units with additional dryer. 8) Extruder Reifenhäuser. 9) Rewinder. 10) Guide roller in the basement. 11) Web guiding under unwinder 1 in the basement. 12) 2x resin silos in the basement. This is a complete extrusion line with peripheral equipment. Documentation available. An on-site inspection is possible.

Specifications: Vnenn: 2,950 cbm/h Vmin: 2.251 cbm/h Suction nozzle Ø 200 mm Motor power 3.7 kW Rated speed 2,805 rpm Rated current 7.5 A Frequency 50 Hz, 3 phases Test class H2 Vacuum at Vmin at the interface between dust collector and dust generator (4 m hose) with suction nozzle Ø 200 mm = 2,200 Pascal = 22, with suction nozzle Ø 180 mm = 2,500 Pascal = 25 Filter cleaning by compressed air (to be triggered manually, compressed air connection on site, max. 4 bar) Delivery incl. various chip collection bags

Colmec 150mm Extruder Model: TGF 150/ 16D LD ratio 16:1 Screw length 2340mm Siemens Motor, 178kW, 1860rpm Hydraulically operated crosshead With Control cabinet With Temperature control unit Spare screw Year 2001

volume capacity: 1600 m3/h feed volume: 99,9 % length: 3.000 Absaugschlauch mm motor: 230 Volt motor: 1,1 KW weight: 80,0 kg range L-W-H: 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class W3 (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surchar ...

Spindle and jacket for extruder. - Brand: COVEX - 90 diam. x 2300 - 25 L/D Spindle length with resistors

Dormatec AirBench FN066784A - Extraction table The extraction tables are suitable for all types of contamination (metal, plastic, stone, wood, glue steam, etc.) thanks to a variety of filters. Dust, steam or smoke are immediately extracted through the work surface. The extraction tables are available in different sizes and configurations. All you need is a power outlet, plug and play! The FN extraction table, like the FP model, is a welded steel table with a load capacity of 150 kg on the tabletop and has access to the filters at the front of the table. Construction of the FN suction table - Industrial design - Robust welded filter housing made of sheet steel 2 mm - Steel surface in sheet steel 3 mm - perforated slide. 4 mm - Surface treatment: Powder coating in RAL 7035 (light grey) Filter - A - Non-sparking dust Aluminum, plastics, atmospheric dust, flour or simi ...

Specifications: Procedure: 2-stage Filter area: approx. 17 m² Separation efficiency: >99% Welding Fume Separation Class: W3 Extraction capacity: 1100 m³/h Diameter of extraction arm: 150 mm Length of extraction arm: 3 m Power connection: 3 x 400 V Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions, approx.: 785 x 730 x 950 mm Weight, approx.: 106 kg Characteristics: - Made in Germany - For low to medium smoke/dust quantities - Suitable for occasional to frequent use - Convenient filter change through maintenance door - Extraction hood can be rotated and swivelled 360 degrees Equipment: - 3 new replacement main filters (original price approx. 330 euros each) - 7 new replacement pre-filters - 2 extraction hoods (one of them unused)

PET bottle blow moulder, with a production capacity of up to 4000 b/h (depending on the format). For formats between 0.25lts and 3lts. Composed of: -. Furnace for heating preforms composed of 6 heating modules of 8 infrared lamps each. -. Preform Transfer Wheel -. Two-stage compressed air blowing body, low-pressure pre-blowing and subsequent high-pressure blowing. -. Bottle Transfer Wheel Delivered with pallet turner. DOCUMENTATION AVAILABLE

SIDEROS Model ECO 6 HC Year of construction 2006 7.5 KW

Qty. 1 Second-hand extrusion press line Mfc.: Breda Sutton, Cometal, OMS Type: oil hydraulic, Dia.: 7 inch, 178 mm Force: 1600 MT Built: 1977 Fully reconditioned in 1995 Scope of supply: Log feeder Billet Furnace Hot Shear Extrusion Press Run-out Table Puller Cooling Bed Stretcher Finishing saw Aging Furnace Die Furnace

PRT RECYCLING EXTRUDER for PE PP PC PS ABS, Extruder with 85 mm screw, 30 L/D, Constructed in year 2000 - very few hours of work, NEW Crammed feeder new 2023 FF85VE, 60 kw Siemens drive 2.200 rpm, Average throughput rate 200 kg/h, depending on materials and feeding rate, Total heaters power 38,6 kw, N.1 vacuum degassing pump, Manual screenchanger, NEW 2023 Water ring pelletizer WF150, Drying centrifuge, Total installed power cutting group 14 kw, Vibro classifier, Total weight about 3 Tonnes, excellent conditions, MATERIALS: PE PP PC PS ABS PS, capacity: ca.200 kg/h depending on materials and feeding rate, availability: ready-to-go

Stock# UG6388 Little used single screw extruder by Farmet (CZ) model FE100 WE Clever Max. Machine can reach output in range from 90-130 kg/h. Power consumption 16 kW. Includes water pump, die cutting knife, some toolings. Local control panel with plc controls. Previously tested on animal food production. Dims: L 195 cm x W 102.5 cm x H 178 cm x weight 600 kg.

Key data: 2 mm, 17

Twin screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine No.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx. 30 1/min. Worm torque: 10,000 Nm Motor power: 3.3 - 25.0 kW, Drive motor: Commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool Heating Zones: 8 Temperature control: 12 x digital temperature controller KS 40 (PMA) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tools) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material funnel and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hoppe ...

We offer a high-performance mobile extraction system for painting work. The offer includes a new filter mat. Engine power 2.5 Kw Device can be tested on site. Forwarding possible by arrangement. No indication of VAT in accordance with § 19 UStG (small business regulation).

We have some Coperion CTE75, CTE65,CTE50 extrusion compounding lines,serious buyers contact us.

One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible.

Extraction Lissmac Type: DD 3200 BJ 2014 for Deburring Machines

A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ...

SPECIFICATIONS: Installed power: 2.2 kW 02 Cotton bags: Ø 450 mm

SPECIFICATIONS: Installed power: 3 kW 02 Cotton bags: Ø 450 mm