129,243 used machines on RESALE, but how to find them? Machine Search
SPECIFICATIONS: Flow rate m3/h: 3,500 Number of bags: 3 - Ø 470 mm Number of filter bags: 24 - Ø 230 mm, height 2000 mm Installed capacity: KW 4.0
Key data: 50 mm, 30
Used extruder in good condition with screw size: diameter 50 mm x 30v grooved intake and degassing zone Type RH 241-1-50-30v with DC drive 30.2 kW Built in 1993 Immediately available without control cabinet With control cabinet 4-6 weeks delivery time
Holtrop Jansma Extraction with Kontainer Chip Disposal Type: MSK350S Year of construction: 1998 Type: overpressure filter system Intake manifolds: ø350 mm Capacity: 8,000 m3/hour Year of construction: 1998 Filter surface: 46 m2 Fan: ETD 350, 7.5 KW/1.500 tpm Star wheel chip disposal: 800 mm - Pressureless Chip disposal fan: EMD-200, 4 KW-300tpm, 45m3/uur Explosion Pressure Release: Doors serve as a pressure release in the event of an explosion Pressure Measurement: Pressure Dial Gauge Cleaning: 0.13 KW/1500 KW vibrating motor Air recovery: 500500 mm with built-in flame protection damper Dimensions: 3,3503,0001,200 mm Scope of delivery: filter system with intake fan Fan, transport fan, control cabinet, air recovery with built-in flame protection flap
Key data: 35 mm, 25 , 107 U/min
used REIFHÄUSER single screw extruder with screw size: diameter 35mm / 25 ld The extruder is in very good condition Type RT 78-1-35-25 New control cabinet with new motor AC -7,5kW Year of construction 1994 Quickly available
Holtrop Jansma-AFS clean air extraction with compressed air cleaning, auger discharge, rotary lock, chip fan, return air with summer/winter gate valve and fire protection device Type: OSFS 185 Year of construction: 2005 (2015 new turnstile and new control system) Clean air extraction Suction supports: ø700 mm + ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (onderbak 2,700 mm + bovenbak 2,700 mm + 800 mm fans) Capacity: 21,000 m3 /hour Chip fans: 2 15 kW, 380V, 56 Amp, 10,500 m3/uur, 3,000 tpm, 3,850 Pa, Type: RL E 550130 Filter surface: 185 m2 Filter tubes: 150 stuks Length of filter tubes: 2,200 mm Diameter of filter tubes: 180 mm Cleaning: Compressed air cleaning Flame protection: Sprinkler installation with fire brigade connection Screw: HJ STH-380 12 tpm Turnlock: HJ ZRS-300, 31 tpm Hopper dimensions: 250350 mm Transport fan: Connection diamet ...
Extruder 1 screw: 70 Ø diam, 35 L/D. Brand: Flag, engine: 37 KW (50 hp). No electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
1 Screw Extruder for Sale Brand: Maquiplast Diameter: 80 mm Ø L/D ratio: 20 L/D Engine: 30 kW (40 hp) Variable Speed Drive: Delta For more details or to make an enquiry, please contact us.
Key data: 30 mm, 28 , 110 U/min
Used Filament Line Single Screw Extruder 30mm 28L/D 2 meter water bath Trigger AB50 Winder W250 Machines from PMH GmbH
120 mm cold feed pen convert-extruder, GE 120 SC, make Berstorff, output capacity up to 1,000 kg /h as a power extruder with strip spray head, complete rebuild mechanically and electrically in 2024
Key data: 273 m², 5000 kg, 7300 mm
Volume flow 25,000 m3/h Exhaust fans 2x
Inv. Num. : 7890 Type: Coex 3-layers Producer: MAM Created: 2005 Parameters: Film width: 440-600 mm Circumference of the balloon: 1200 mm Maximum speed: 30 m/min Cutting thickness: 0.060-0.200 mm
Key data: 75 1/min
This WEBER extruder is in machine storage at Plastima Used Machinery. The machine comes from 1997 and is in great condition. Brand: Hans Weber GmbH Model: NE 7 042 Type screw: single screw Year of construction: 1997 Screw Ø: 75mm Working hours: 58.668
Offer 24386 Specifications: - Mobile cartridge filter system with articulated extraction arms - Suitable for welding mist extraction when welding - Steel + stainless steel + aluminium + unalloyed or galvanised steels - Welding fumes class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h - max. static pressure 2500 pa - Filter area 20 m² -Auto. Cleaning of the filters - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - Fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h
Motors: no - Pneumatic axes Gripper rotation: Yes together with Z-axis Clamp tilting: No Clamp sprue : Yes Vacuum pupms: 1 Clamp control : Yes Euromap 12 - Stroke (Y): 700 mm - Stroke (X): 100 mm - Stroke (Z): 45-90 mm
Kanalventilator Absaugung - Duct Fan ZENNER VTZ 560/50/2-W (Absaugung - Extraction) Baujahr / Year 2001 - Serial-No. 64.031 Volumenstrom / volume flow 2.21 m3/s Totaldruckerhöhung / total increase of pressure 3880 Pa Dichte / density 1.2 kg/m3 Drehzahl / Speed 2920 min-1 Kupplungsleistung / required performance 14.4 kW Temperatur / temperature max. 80°C Zum absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Offer 24299 Specifications: - Volume flow approx. 2170 m³/h. - Dust bags / chip bags up to 170 L - Connection socket 160 mm - Connector adapter 2 x 100 mm - Drive power 400 V / 2.2 kW - Required space W 1200 x H 1900 x D 550 mm - Weight approx. 85 kg
High-performance fan Zenner, type VTZ 710/63/1 Sonder, built in 2014, consisting of control cabinet, frequency converter, cell airlock Specifications Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Sonder Year of Make: 2014 Volume: 4.72 m³/s Temperature mx.: 80°C Density: 1.2 kg/m³ Total pressure: 5,000 pa Speed: 2900 1/min Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg Remark: The fan is intended for transporting paper/cardboard. In the process, the material is also chopped. The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to answer any questions you may have about the mac ...
Ankom XT10 Fat Extractor + RD Dryer Fat Extractor ANKOM XT10 for Crude Fat Determination The closed system with FilterBag technology shortens extraction times Sample Weighing: 1-2g directly into FilterBags Working range: 0-100% fat, extraction times: 15-60 min, extraction up to 15 samples simultaneously Semi-automatic system, Unattended process flow> 90% solvent recovery, Manual addition of solvent More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Extrusion line for 3D monofilament composed of: - 1-spindle extruder, brand: Bandera, 45 mm diam 25 L/D, motor: 10 hp. With dryer hopper: 100 L, master dispenser. With electrical panel and variable speed drive. - Head for 3D monofilament. - 3 stainless steel bathtubs: 2 m. - Stretching: 4 rollers. With variator. - 2-point monofilament thickness gauge. - Winder: 480x500 mm diam. For large coils. - Large coil unwinder and double rewinder for small coils. - Dehumidifier Brand: Puchades, power: 6.7 KW (9.1 hp), 14 Amp, year: 2014.
Brand: Bassra Type: BMT-1000 Kind: Butyl Extruder Max speed: 1k/per min. Output Capacity 30kg. Hopper capacity 3 temperature controls Digital readout of temperature zones Programmable temperature controllers Progressive kit heating funnel 3 meter hose Positive displacement gear pump Undertemperature on all zones Miniature circuit breaker Photos/film available: Photos available Other: Gun is missing 11.1.180
Kanalventilator Absaugung - Duct Fan Coral PAP HP20 (Absaugung - Extraction) Baujahr / Year 2003 HP 20 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Kanalventilator Absaugung - Duct Fan Coral PAP HP 7,5 (Absaugung - Extraction) Baujahr / Year 2003 HP 7,5 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Year 1999 Tonnage: 180 T Tray dimensions: 1020 x 1600 mm Max mould height: 2000 mm Max mould width: 1200 mm Min mould thickness: 840 mm Max mold opening stroke: 895 mm Screw diameter: 120 mm L/D ratio: 28 Maximum extrudable weight in PE: 19000 Gr Maximum injectable volume: 25 liters Number of parison regulation points: 100 Die Min/max diameter: 190/450
Year 1990 retrofitted to 2006 Type: S80 Power: 100 kw Clamping force: 80 Tons Passage between columns: 1400 x 800 mm Tray dimensions: 1800 x 1200 mm Minimum mould thickness max: 800 – 1200 mm Maximum mould width: 1200 mm Minimum mould height max: 500 – 1100 mm Total opening of trays: 2000 mm Minimum die diameter: 150-350 mm Hydraulic servo control: 6 spool valves Pneumatic servo control: 17 distributors Screw diameter: 100 mm 23LD Material throughput: 360 kg/hour Parison Regulation: MOOG 400 points Blowing rods: low position Accumulation weight: 8KG/HDPE
SPECIFICATIONS: Air inlet opening: Ø 500 mm Installed power: 22 kW
Mechanical filter Air volume: 2000 m³/h Device extraction capacity Colour: Light grey Electrical connection: 400V, 50/60 Hz 0.75 kW Footprint: 900 x 300 mm Weight: approx. 50 kg
Key data: 63 mm, 1300
Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of Make: 1994 Machine No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-hard profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Cond ...
Code: N0022 Brand: ARIATECH Model: ATB 2 - CE Standard Professional wheeled dust collector with 2 filter bags for dust and chips from carpentries, machine shops and various - CE Standard Structure in sturdy galvanized sheet metal Wheeled base to be able to be moved around the workshop and be connected to more machines Can be mounted indifferently either with the suction mouth facing upward or downward Motor Hp 4 ( Kw 3) Diameter of nylon bags mm 500 Diameter of plastic collection bags mm 500 Overall dimensions of assembled machine mm 1700 x 600 x 2500 h Overall dimensions of disassembled and packed machine mm 1750 x 800 x 800 h Weight kg 130
Spänex Aspirator with driving device D= 120mm and distributor G&-5134-M3OBQ
90s cold feed extruder, GE 90 x 16 D Vac, make Troester, with large hose / profile spray head, drive 52 KW Siemens AC, 4 TCU Siengle
Welding Fume Extraction LINCOLN NORWELD SP-3M Flow rate: 300 m3/h motor: 2.2 kW 380 V Dimensions: 1200 x 630 x 870 mm used, tested !
Schuko extraction system Motor 7.5 KW Volume flow 7100 m3/h Bagging filter Return air / exhaust air duct
Welding Fume Extraction KEMPER 91710110 year: 1996 Operating hours: 12880 h Volume flow: 240 m3/h 1,1,1,000 1 kW 230 V Dimensions: 620 x 350 x 640 mm used, tested !
Brand: Farmet Model: FE500 Condition: Used Extruder for soya, cereals and waste products for animal feed production. Extruder was used very little. Find more here - / Contact us at -
Chip extraction, industrial vacuum cleaner NILFISK GB 635 50 STB -U- with stainless steel tank for chip extraction 380 V without hoses used, tested ! Dimensions: 1100 x 700 x 1000 mm
Complete module for supply of two welding workstations with Integrated welding fume extraction from Teka (welding fume separation class W3, with automatic filter cleaning) for steel. Movable product. Small appliances (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively, extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled included 1 frame 2 Boom arms AGA 2020 1 tool cabinet 1 gas bottle holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding machines of the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table, which can be seen in pictures 5 &6, can be purchased separately! Currently, a trade fair return and a used welding workstation (SAP) are available. - We loo ...
Welding Fume Extraction LINCOLN NORWELD DF-500 Volume flow: 500 m3/h System pressure: 1000 mm/Wg ( mm water column ) - approx. 0.0.000 mm 098 bar Fan speed: 9200 rpm Operating voltage: 380 V 3AC Power consumption: 5.5 kW connection diameter ( inside / outside ): 2x Ø 27 / 32 mm, 1x Ø 70 / 75 mm motor: ATB 132S 5.5 kW 380 V 3AC 50 Hz IP54 used, tested ! Dimensions: 1800 x 1200 x 970 mm
Twin screw extruder APV Baker, int. ref. APV 5 (Baker Perkins) Ø50/25D + additional liner 10D(for 35D), this was totally revamped in 2017, liners and screws are in quite good conditions, reduction gear was replaced in 2021. Operator panel with recipes and 14 heating zones, all in good conditions. Find more here - / Contact us at -
Key data: 50 mm
50mm Extruder Manufacturer: Rutil Screw diam. 50mm LD ratio 15:1 Max speed (50 Hz) 70rpm
- SFE. Superfast 2x18L CO2 Extraction System manufactured by Thar Process. The supercritical fluid extraction system is designed to extract oil, oleoresins, and other ingredients which become soluble in supercritical CO2 at high pressure and temperature. SFC. Isolator SFC 20 CO2 Purification System manufactured by Thar Process. Purification SFC is a normal-phase chromatographic technique that uses CO2 as the main mobile phase. Find more here - / Contact us at -
Berstorff ZE 90A x 36D compound extruder Dynamische Tragzahl: 633 kN(Dynamic Load Capacity) Theoretische Lebensdauer bei 120 bar und 300 l/min: 40,000 h(Theoretical Lifespan at 120 bar and 300 l/min) (Siehe Lebensdauerdiagramm, Punkt 8.3.4)(See Lifespan Diagram, Point 8.3.4) Anzahl der Vollzylinder (4 D): 1(Number of Full Cylinders (4D)) Heizleistung pro Zylinder: 9.2 kW(Heating Power per Cylinder) Anzahl der offenen Zylinder (4 D): 2(Number of Open Cylinders (4D)) (1x Füllzylinder 4D unbeheizt)(1x Fill Cylinder 4D Unheated) Heizleistung pro Zylinder: 6.8 kW(Heating Power per Cylinder) Anzahl der Vollzylinder (6D): 2(Number of Full Cylinders (6D)) Heizleistung pro Zylinder: 18.4 kW(Heating Power per Cylinder) Anzahl der offenen Zylinder (6D): 1(Number of Open Cylinders (6D)) Heizleistung pro Zylinder: 16.0 kW(Heating Power per Cylinder) Anzahl der Kombizylinder (6D): 1(Numb ...
cold feed extruder - 60 mm x 18 D vacuum, with feed roller, drive 22 KW, screw speed 10 to 60 rpm, with gear pump, 5 TCU,
AST 220 / POMINI-FARREL flat head / POMINI-FARREL 18"x15" Slabber / BANDERA Slabber. Refer to code 1043-1044-1045-1046 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
cold feed vacuum extruder Troester 90 mm x 18 D, with feed roller, drive 46 kW, pie speed 10 to 60 rpm, 5 TCU,
Key data: 45 mm, 1350 , 298 U/min
Single Screw Extruder Cincinnati Talos 45-30 G Year of construction 2009 + Corrugator Maintools MTC 60/90 Year of construction 2006 Both machines are in good condition, and immediately available
Manufacturer: MARIS Model: 92/40D Year of Manufacture: 1997 with double degassing + pumps + loading hopper + electrical panel Find more here - / Contact us at -
Mobile extraction Brand: Riedex Type: DM 300 New machine Technical data: - Motor power 7,5 kW - Nominal volume flow 5089 m³/h - max. volume flow 6000 m³/h - 31,8 m² filter surface - motorised cleaning - Residual dust content
maximum number of results exceeded
please refine your search
