135,939 used machines on RESALE, but how to find them? Machine Search
: gebraucht : 2015 : 5434 : prompt, Zwischenverkauf v : China : 2200 € : 1 : 1580 € : 2.000 x 50 mm : 250 x 50 mm : 400 - 2800 1/min : 35 mm : 2.2 kW : 1160 mm : 700 mm : 1850 mm : 150 kg belt grinding- and polishing machine in one device continuous variable revs by frequency converter 2 clamping mandrels quick action clamping chuck incl. underframe users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : 162560 € : 3072.38 € : 1200 mm : 730 mm : 1200 x 600 mm : 1200 x 600 mm : 1300 mm : 5 - 30 m/min : 0-2250 mm/min : 0,001-32 mm : 685 mm : 560 mm : 0-675 mm/min : 500-2200 1/min : 11 kW : 5.5 kW : 3.1 kW : 3.1 kW : 4790 mm : 3207 mm : 2305 mm : 8100 kg : 1150 kg : 1600 kg : 405 x 75 x 127 mm : 0,0001 mm iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection &, final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm I/O diagnosis &, alarm display Max. table speed (X axis) 30 m/min Integrated ma ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 119920 € : 2266.49 € : 610 mm : 600 mm : 600 x 300 mm : 600 x 300 mm : 0 - 20 m/min : 0 - 3000 mm/min : 0,001 mm : 350 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 3160 mm : 2450 mm : 2080 mm : 3400 x 2200 x 2530 mm : 4000 kg : 975 mm : 195 kg : 370 kg : 355 x 50 x 127 mm : 1,1 / 1,1 kW : 3.9 kW : 0,005 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heav ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 109520 € : 2069.93 € : 610 mm : 600 mm : 600 x 300 mm : 600 x 300 mm : 5 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 350 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 2.2 kW : 4020 mm : 2450 mm : 2080 mm : 3400 x 2220 x 2530 mm : 3700 kg : 975 mm : 195 kg : 370 kg : 355 x 50 x 127 mm : 1,1 / 1,1 kW : 0,005 mm : 0,005 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heav ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 171210 € : 3235.87 € : 610 mm : 590 mm : 600 x 300 mm : 600 x 300 mm : 0 - 25 m/min : 0 - 4000 mm/min : 0,001 mm : 350 mm : 450 mm : 0 - 3800 mm/min : 0.001 mm : 600 - 3600 1/min : 11 kW : 3103 mm : 3933 mm : 2480 mm : 5800 kg : 810 mm : 314 kg : 420 kg : 405 x 50 x 127 mm : 2,4 / 3,9 kW : 3.9 kW : 0,005 mm : 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart iControlIV control with 15", touchscreen with electronic wired handwheel PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes wit ...
workpiece height: max. 940 mm total power requirement: 6 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,2 x 1,0 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
drill diameter: 50 mm total power requirement: 2,2 kW weight of the machine ca.: 0,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
On offer is a stable air filter system/industrial workbench of the well-known brand Krumm-tec. It has a grating work surface and a transparent cover (plexi) for protection. Year of construction: 2011 Weight 150 kg IP 55 The workbench is in good used condition with visible signs of use, but fully functional.
Technical data Description: Floor Grinding and Polishing Machine Manufacturer: ASL Model No.: T8 Voltage: 220–240 V Configuration Mobile floor grinding machine with round grinding head and protective cover. Equipped with guide bar, control panel on the handle, display, connection cables and hose lines. Remarks Scope of offer according to illustrations. Auction-ID: A7-49302-39
grinding length: 600 mm grinding width: 300 mm workpiece height: 312 mm table-size: 600 x 300 mm max. workpiece weight: 320 kg dist. center of grinding spindle - table: 490 mm table travel longitudinal: 700 mm table travel cross: 340 mm table feed: 1 - 25 m/min turning speed range - grinding wheel: 1500 U/min power capacity - grinding motor: 2,2 kW grinding wheel size: 355 x 25 x 127 mm magnetic clamping plate: 610 x 305 mm dressing device: Kopfabrichter voltage: 400 V total power requirement: 3,0 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,90 x 1,90 x 1,90 m hydraulic power unit: 0,60 x 0,35 x 0,75 m coolant: 0,70 x 0,40 x 0,80 m - Serial-No.: EB 1507 - automatic vertical feed - dressing device - Band filter unit - coolant equipment - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suitable for automatic lapping or re-toothing and chamfering of HSS and segmented circular saw blades as well as carbide circular saw blades in deep grinding using CBN or diamond grinding wheels., Accessories:, Option chamfering,, total enclosure,, coolant system,, automatic central lubrication,, electrostatic mist extractor (Heab EMZ 10-EL), automatic fire suppression system,, Machine light,, 2 grinding wheel holder,, 1 saw blade holder small (Ø36 mm),, 1 saw blade holder., Workspace : Diameter (20) 80 -560 mm, Tooth pitch: 1-25 mm, Number of teeth: 2 - 998, Circular saw blade thickness: up to 8 mm, Grinding wheel diameter: 200mm, Grinding wheel bore diameter: 32 mm, Connected load: 7 kW (400V / 50 Hz), Weight approx: 980 kg, Dimensions W x D x H =: 1568 x 1750 x 1995, colour: blue RAL 5014 / gray RAL 7035
Max wheel diameter: 630 mm module 12, max blade width: 127 mm, max spindle speed: 1690 rpm, max workpiece weight: 400 kg, motor power: 8 kW Auction-ID: A7-49398-47
Junker Cylindrical Grinding Machine Type EJ 10 Year of manufacture 2005 Control Siemens Center width 150mm Axis height of the centering point 100mm Workpiece mass max. 5kg Grinding wheel diameter max. 400mm Grinding wheel width max. 63mm Bore of the grinding wheel JUNKER spindle collar 27mm The offer is aimed exclusively at tradespeople within the meaning of §14 BGB
Transport dimensions: machine - 2500x1650x2150mm, First electric cabinet - 950x450x2000mm, Second electric cabinet - 1250x1010x2160mm Auction-ID: A7-49398-36
Monzesi Rossi Monza 400 centerless grinding Grinding wheel 200 400, Special price, The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap., Grinding wheel width: 200
Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500, Electric retrofit with inverter (regulating wheel) The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding ...
Surface grinding machine manufactured in 2002. This Jones & Shipman Format 5-200 includes Mitutoyo PH 350 projector and features a table size of 600 x 200 mm and includes a comprehensive set of accessories, including 42 new discs of various widths and 19 diamond dressers. The machine is in very good condition, having been operated primarily by the same operator. If you are looking to get high-quality surface grinding capabilities, consider the Jones & Shipman Format 5-200 machine we have for sale. Contact us for further details.
Max. grinding length: 2000mm, max. grinding width: 1000mm, max. working height with new grinding wheel: 600mm, max. workpiece weight: 3.2t, max. table load: 4.5t, clamping surface dimensions: 2860x1000mm, tool mounting: 4x grinding wheel mounts, spindle diameter at front bearing: 90mm, grinding wheel diameter: 500mm, max. grinding wheel width: 150mm, mounting diameter: 203.2mm, spindle speed: 1000-3000/min, cross travel: electromechanical, cross travel feed: 1-5000mm/min, max. cross travel: 1100mm, smallest programmable value cross axis: 0.001, vertical travel: electromechanical, vertical travel feed: 1-5000mm/min, max. vertical travel: 650mm, smallest programmable value vertical axis: 0.001, feed drive type: hydraulic, connected load: 125kVA, length: 10,284mm, width: 5137mm, height: 3925mm, weight: 22t, operating hours: 18,176h, with documentation. An on-site inspection is possible.
BUDERUS CNC 235 – CNC Grinding and Machining Center Machining / Spindle 2 machining areas / channels Max. machining length: 150 mm Max. swing diameter: Ø 310 mm Workpiece spindle speed: 0–3,000 rpm Spindle bore: Ø 45 mm Workpiece spindle positioning via C-axis Table speed X/Z: 0–30 m/min Motor Spindle WMZ / DVS Type: GS 205-045/17 Year of manufacture: 2014 Automation Automatic workpiece feed / conveyor system Coolant / Filtration System LIQUI-Filter GmbH System: UR1060 / MW260 / Gamma 13 Tank capacity: 2,400 l Year of manufacture: 2015 Cooling System HYFRA gamma 13-F-S Cooling capacity: 13 kW at 32 °C Year of manufacture: 2015 Measuring Technology JENOPTIK post-process measuring technology Year of manufacture: 2018 Supply Data 3 × 400 V / 50 Hz Installed power: approx. 45 kW Compressed air requirement: 15 Nm³/h at 5 bar
grinding diameter: 360 mm grinding length: 1000 mm centre height: 180 mm grinding wheel diameter: 500 x203,2 x 50-100 mm total power requirement: 12 KvA weight of the machine ca.: 4,7 t dimensions of the machine ca.: 3,3 x2,0 x 1,8 m - Includes belt filters - Includes grinding wheels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 910 mm Number of sanding units: 1 st. Workpiece thickness max.: 3 - 160 mm sanding belt measurements: 2.200 x 1.010 mm Feed motor: 0,55/0,75 kW Feed speed: 4,5 / 9 m/min. Weight: 1.210 kg : 18,5 m/sec output: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: LIKO Model: ES2 Condition: Used Stock number: 9430 The grinder is in good condition.
Manufacturer: Carl Zeiss Model: OVS 250 Machine type: Automatic glass grinding machine Current type: D Frequency: 50 Hz Operating voltage: 380 V Rated current: 7.6 A Control voltage with/without transformer: 220 V / 24 V Rated fuse current in the supply line, without/with increased delay: 20 A Wiring diagram number: 85 24 31 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Carl Zeiss Model: HKM063 Machine type: cylindrical grinding machine Technical Specifications: - Frequency: 50 Hz - Operating voltage: 380 V - Rated current: approximately 10.1 A - Control voltage with/without transformer: 220 V / 24 V - Rated fuse current in the supply line, without/with increased delay: 16 A Find more here - .ucymachines/ Contact us at - sales@ucymachines
SCM Sandya Uno Wide Belt Sander Working width 900mm Working height 3-160mm Number of generators 2 Aggregate in rubber shaft Combi unit with boot 11kw main motor Pneumatic Oscillation Sandpaper Dimensions 930×1525 Two feed speeds of 4.5-9m/min Machine Dimensions:1560 x 1280 x 1920mm Weight about 1100kg Net price
Control cabinet for ELB surface grinding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
Stand-mounted workshop sharpening/grinding machine for tool finishing or maintenance operations. This machine normally allows precision work such as sharpening or light grinding of metal parts. ⚠️ The machine is sold out of service, which makes it an interesting lot for: Refurbishment Parts Recovery Collection of old machines Use as a spare part Ideal for: Mechanical workshops Maintenance Technicians Lovers of old machine tools Industrial Equipment Resellers Auction-ID: A1-48554-35
HASBERG FSS tool grinder, robust machine for sharpening and maintenance of cutting tools in the mechanical workshop. This type of machine extends the life of tools (drills, milling cutters, turning tools) thanks to precise and reproducible sharpening. The solid design typical of 1970s machines offers high stability, which is appreciated for precise sharpening work. Ideal machine for: CNC and conventional machine shops mechanics and machinists Industrial maintenance Production workshops Lovers of old machine tools Auction-ID: A1-48554-16
Complete workshop station including workbench with drawers, double grinding bench and protective panel, ideal for sharpening, grinding and part preparation work. This type of workstation is essential in a mechanical workshop for the maintenance of tools (drills, chisels, metal parts) and the finishing of machined parts. The reel allows for fast and precise sharpening, while the back panel protects the operator from splashes and sparks. Equipment perfectly suited for: Mechanical workshops Industrial maintenance Manufacturing and production Locksmithing / Boilermaking Technical Training Practical solution to have a complete workstation dedicated to the finishing and maintenance of tools. Auction-ID: A1-48554-33
STUDER S 20 FAVORIT ist eine Rundschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazität: Spitzenhöhe 100 mm, Spitzenweite 400 mm, Längsweg 420 mm; Scheibe Ø350×50 mm (Bohrung127), Breite 30 mm; Werkstück 20 kg. Techn.: Umfang 30 m/s; Spindel 30–1200 t/min st.; Tisch 100–3500 mm/min st.; Motoren 3 kW/0,5 kW; 3×380 V; 10 kVA; Gewicht ~1600 kg; Abm.2350×1480×1400 mm. Zubehör: Reitstock, Innen-Schleifeinrichtung, Abrichtgerät, 3-Backenfutter Ø100/160, 2×CBN, Spannzangen W20. Erreicht enge Toleranzen; Einsatz: Automotive, Luftfahrt, Werkzeugbau, Medizintechnik, Uhren. Technische Daten ohne Gewähr
HAAS Schleifmaschinen MULTIGRIND CA ist eine CNC Werkzeugschleifmaschine mit hoher Präzision, hoher Genauigkeit und Zuverlässigkeit. Sie verfügt über 5 Achsen: X 630 mm, Y 345 mm, Z 430 mm; Schleiflänge 500 mm; Schleifdurchmesser 260 mm; max. Schleifscheibendurchmesser 250 mm; C-Achse (Spindel) Auflösung 0,001°; Schwenkwinkel -225° bis +70°; Auflösung 0,0001 mm. Anschluss 50 Hz, 3x 400 V; Maschinengewicht ca. 8500 kg; Abmessungen L 2650 x B 2400 x H 3200 mm. Ausgestattet mit Lade- und Entlade-Roboter sowie Feuerlöschanlage. Entwickelt für enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr
4x Radial Drilling and Grinding Machines Comprising: TaiPiin TPR-820 radial drill with tools Optimum opti drill DH34BV Syderic bench drill Belt grinding machine Auction-ID: A1-48805-223
Mitutoyo Length Measurement Mod. KA 12 (for longitudinal and transverse movement) Retrofitting with a CNC control system for the puller, including the air conditioning unit, Tip width: 630 mm, the machine has no tailstock and was specially used for forage work, max. grinding diameter: 280 mm, max. grinding wheel size: 400 x 40 x 127 mm, (none included), Speed of grinding spindle 2040 min-1, 6 speed levels of the tool spindle: 22.4 to 280 min-1, Drive motor 4 kW, Accuracy / Smallest part value: 0.001 mm, Taper in Riding and Tool Spindle Morse 4 Largest table length movement: 760 mm, Mass between tips 120 kg, Total power: approx. 9.3 kW, Machine weight: approx. 2600 kg, Machine Dimensions: L 3075 x W 1650 x H 1500 mm Year of manufacture: correspond to production no.: 1989 - 1991 Swivelling headstock (± 90°) and grinding head (± 45°), Hydraulic table movement and autom ...
Machine Type Manual Surface Grinder Manufacturer Falcon Machine Tools Co., Ltd. (Chevalier) Model FSG-618M Country of Origin Taiwan Serial Number A378A001 Machine Category Precision surface grinding Working Capacity Item Specification Table Size 150 × 450 mm Max Grinding Length 460 mm Max Grinding Width 180 mm Max Distance Table to Spindle Center approx. 400 mm Max Workpiece Weight approx. 100 kg Table & Movement Axis Travel Longitudinal (X) 460 mm Cross (Y) 150 – 180 mm Vertical (Z) 400 mm Item Specification Table Type Reciprocating Table Drive Hydraulic (with manual control option) Magnetic Chuck Permanent magnetic chuck (visible) Grinding Wheel & Spindle Item Specification Grinding Wheel Size approx. Ø180 × 13 × 31.75 mm Spindle Speed approx. 2850 rpm Spindle Type Horizontal spindle Motor & Electrical Item Specification Spindle Motor ...
Universal cylindrical/internal grinding machine with motorized spindle, workhead/chuck and manual controls. Used condition, suitable for repair, refurbishment or workshop use. Manufacturer and model not visible; specs to be confirmed. Auction-ID: A1-49190-37
Conventional surface grinding machine with magnetic chuck/table, coolant system and protective side guards. Used industrial machine; brand/model not clearly visible in the photos. Auction-ID: A1-49190-48
Machine Type Rod Cutting & End Grinding Machine Manufacturer Lee Yagn Machinery Co., Ltd. Model LY-500 Serial Number 03977 Year of Manufacture 1994 Country of Origin Taiwan Machine Function Cutting-off and end surface grinding of rods/tubes Max Rod Diameter approx. Ø10 – Ø50 mm (estimated) Max Rod Length Unlimited (through-feed type) Clamping System Manual V-block clamp Processing Type Simultaneous cut-off + end grinding Motor Voltage 380 V Frequency 50 Hz Motor Power approx. 1.5 – 3 kW (typical for this size) Machine Dimensions (L × W × H) approx. 800 × 600 × 900 mm Machine Weight approx. 120 KG Auction-ID: A1-49190-9
REISHAUER RZ 362 A – CNC Gear Grinding Machine Year of Manufacture: 2001 Serial No.: 75523 Max. Workpiece Diameter: approx. 360 mm Max. Module: 7 Max. Gear Width: approx. 175 mm Max. Workpiece Weight: depending on configuration, approx. 60 kg Grinding Worm Diameter: approx. 270–350 mm Helix Angle: up to approx. ±45° CNC Control: Reishauer Connected Load according to Nameplate: 26 kVA
CHEVALIER FSG-618M Manual Surface Grinder Type: Manual surface grinder Manufacturer: Chevalier Model: FSG-618M Grinding length: 457 mm / 18.0 in Grinding width: 152 mm / 6.0 in Table size: 150 x 460 mm / 5.9 x 18.1 in Maximum table travel: 482 mm / 19.0 in Maximum transverse travel: 180 mm / 7.1 in Distance from table to wheel centreline: 450 mm / 17.7 in Maximum table load: 210 kg / 462 lbs Spindle and Grinding Wheel Spindle speed: 2,850 rpm at 50 Hz / 3,450 rpm at 60 Hz Spindle motor: 1.5 kW / 2 HP Grinding wheel size: Ø205 x 12.7 x Ø31.75 mm / Ø8 x 0.5 x Ø1.3 in Machine Data Machine dimensions: approx. 1,900 x 1,400 x 2,130 mm / 74.8 x 55.1 x 83.9 in Net weight: approx. 674 kg / 1,480 lbs This item is delivered loaded on truck or container 20`OpenTop. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49190-19
Delivered in original packaging Auction-ID: A1-48552-142
Equipped with mounted grindstone and wire brush, delivered in original packaging Auction-ID: A1-48552-49
mounted on base, equipped with SCHNEIDER electrics with emergency stop Auction-ID: A1-48552-125
mounted on a base box, equipped with safety covers, extraction, SCHNEIDER electrics Auction-ID: A1-48552-82
including grinding stone machine type WG175, 230V, 1F, equipped with 2 grinding wheels diameter 175 mm, NEVER USED Auction-ID: A1-48552-37
This 3-axis STUDER S33 CNC cylindrical grinding machine was manufactured in 2005 and completely overhauled in 2026, with 0 operating hours post-overhaul. It features a center height of 175 mm and a center distance of 1000 mm. The machine is equipped with a powerful 7.5 kW motor spindle and a control system with a 10.4 color touch screen. If you are looking to get high-quality grinding capabilities, consider the STUDER S33 CNC machine we have for sale. Contact us for further details.
Center height: 180mm, distance between centers: 1000mm, max. grinding diameter: 355mm, stop accuracy: 1µm, max. workpiece weight: 500kg, max. workpiece weight when machining in the chuck: 120kg, max. workhead spindle speed: 355rpm, workhead spindle power: 1.5kW, Morse taper: MK5, workhead swivel range toward the grinding wheel/away from the grinding wheel: 90°/10°, quill travel: 40mm, table feed during longitudinal grinding: 0.05m/min-5m/min, travel during longitudinal grinding: 4mm-2180mm, dwell time at reversal point: 0s-5s, max. grinding spindle speed: 1860rpm, grinding wheel dimensions diameter/width/bore: 630mm/125mm/305mm. Weight: approx. 5100kg. The machine has been geometrically reconditioned. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
50 € 
