exhaust used for sale

C350 D5 Open A019J715 Genset Model C350 D5, 350kVA Standby, 320kVA Prime, NT855G6, Diesel, Open Emergency Standby Power (ESP) Emission Level; No Certification Local Code and/or Regulation, CE Output Voltage, 400/230, 3Phase, Wye, 4Wire Engine NT855G6 Engine Air Cleaner-Duty Rating, Normal Duty Engine Coolant Heater, 240V Main Generator HCI4E, 50Hz, 12 Leads, 380-415V, 163C, Emergency Standby Power (ESP) Exciter/Voltage Regulator-Torque Match Exhaust Silencer Grade, Industrial, Flange BS10, Inlet 6 Inch, Outlet 6 Inch, in-Line Entry Exhaust System Accessories, Bellows Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture, 50% Antifreeze, 50% Water Primary Electrical Isolation Device One Circuit Breaker Primary Electrical Isolation Device 630A, 690V IEC, 600V UL, 4Pole, End  ...

C400 D5 Open A019J729 Genset Model C400 D5, 400kVA Standby, 360kVA Prime, NTA855G4, Diesel, Open Emergency Standby Power (ESP) Emission Level, No Certification Local Code and/or Regulation, CE Output Voltage, 400/230, 3Phase, Wye, 4Wire Engine NTA855G4 Engine Air Cleaner-Duty Rating, Normal Duty Engine Coolant Heater, 240V Main Generator HCI4F, 50Hz, 12 Leads, 380-415V, 163C, Emergency Standby Power (ESP) Exciter/Voltage Regulator-Torque Match Exhaust System Silencer Grade, Industrial, Flange BS10, Inlet 6 Inch, Outlet 6 Inch, in-Line Entry Exhaust System Accessories, Bellows Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture, 50% Antifreeze, 50% Water Primary Electrical Isolation Device One Circuit Breaker Primary Electrical Isolation Device 630A, 690V IEC, 600V UL, 4Pole ...

C440 D5 Open A019J736 Genset Model C440 D5, 440kVA Standby, 400kVA Prime, NTA855G7, Diesel, Open Emergency Standby Power (ESP) Emission Level, No Certification Local Code and/or Regulation, CE Output Voltage, 400/230, 3Phase, Wye, 4Wire Engine NTA855G7 Engine Air Cleaner-Duty Rating, Normal Duty Engine Coolant Heater, 240V Main Generator HC5C, 50Hz, 12 Leads, 380-415V, 150C, Emergency Standby Power (ESP) Exciter/Voltage Regulator-Torque Match Exhaust System Silencer Grade, Industrial, Flange BS10, Inlet 6 Inch, Outlet 6 Inch, in-Line Entry Exhaust System Accessories, Bellows Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture, 50% Antifreeze, 50% Water Primary Electrical Isolation Device One Circuit Breaker Primary Electrical Isolation Device 800A, 690V IEC, 600V UL, 4P ...

Make : Wolf Built: 1988 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.0 m (approx. WxH) Roller door: 6.0 x 2.3 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting, support rod 1200x40x3 mm Lifting platform : was defective, was scrapped Heating unit: 209 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust unit: 22,000 m3/h; 7.5 kW Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Nuremberg area Sales price: € 11,990,- net from location incl. dismantling We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, light ...

Rated power: up to 400 l/h (80C pasteurtemp., 10C input temp. Juice) Thermal power: approx. 35 kW Electrical power: 1.4 kW Electrical connection: 230V 50Hz (1 phase) Electrical fuse: 16 A Laenge: 910 mm Width: 960 mm Height: 1850 mm weightweight (heating circuit emptied):260 kg weight (heating circuit filled): 360 kg Heating heater consumption: approx. 3.5 liters/h exhaust gas connection: 150mm Max. Exhaust temperature: 180C sound power level (LW, A): 83dB; New machine - top condition

LUTRO painting booth diagonal ventilation on the side: Make : LUTRO Built: 1996 Dimensions: 4.0 m x 6.5 m x 3.5 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 3 pcs recessed luminaires with 4 x 58 W each Entrance gate: 2.4 x 3.5 m (approx. WxH) Escape door: 0.6 m x 3.5 m (approx. WxH) Heating unit: 200 kW with Abig gas burner Dry temperature: 80 degrees C Supply air unit: 12,300 m3/h; 5.5 kW Exhaust unit: 12,000 m3/h; 5.5 kW Suction register: 2 pieces on the side, 2.6 x 1.1 m (approx. WxH) Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location: Friedrichshafen area Sell price: € 9,990,-, net from location without dismantling We also have other complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, ...

Painting booth for switching to dryer operation: Make : LUTRO Type : KSP7-BT Built: 1993 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps : LED, 2 x 4 pcs recessed luminaires with 3 x each ? W Entrance side: 2-leaf gate 2.3 m x 2.8 m (approx. WxH) Escape door: 0.6 m x 2.3 m (approx. WxH) Rusting: 5,620 x 1,910 mm (approx. WxD), 22 pieces 950x510 mm Heating unit: 242 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,000 m3/h Exhaust unit: 22,000 m3/h Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Schwaz, Austria Sales price: € 9,990,- net, from location, without dismantling We also have other complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, grating ...

CHP with John Deere gas engine and 70 kW of electrical power New exhaust gas turbocharger Control AMG 2 with leanox control Synchronous Generator Stamford 70kW Complete with frame,sound hood Automatic oil refilling with internal silencer and exhaust heat exchanger Operating hours approx.42,000 Suitable for biogas and natural gas

Painting facility Königsmoos: Make : Wolf Built: 1989 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply air ceiling : Filter ceiling Lamps: 2 x 4 pcs. recessed luminaires with 4 x 58 W each Entrance side: 2-wing gate 2.35 m x 2.85 m (approx. WxH), glazed Escape door: 2 pieces, 0.6 m x 2.0 m (approx. WxH) Rusting : the existing rusting remains on site - we can offer alternatives Heating unit: 209 kW, oil burner Energy saving: Speed control with frequency inverter Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust air unit: 22,000 m3/h; 7.5 kW Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Ingolstadt Area

Make : LUTRO Type : Special plant BU EI S Built: 1990 Dimensions: 4.8 m x 7.0 m x 3.9 m (approx. WxLxH), total height 5.5 m Supply air ceiling : Filter ceiling Lamps: 2x4 pcs. Recessed luminaires, 4x58 W + 2x3 wall recessed luminaires on the side Entrance side : Roller door 4.0 m x 3.9 m (approx. WxH) Exit side : Roller door 4.0 m x 3.9 m (approx. BxH) Escape door: 2 pieces, 0.6 m x 2.1 m (approx. WxH) Grating : Full-surface grating, 80 pcs. 690x560 mm, support rod 560x50x3 mm Heating unit: 291 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,000 m3/h Exhaust air unit: 22,000 m3/h Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Stuttgart area Sell price: € 14,500,- net from location, without disassembly

Painting booth Aschaffenburg: Make : Lutro Built: 2007 Dimensions: 4.0 m x 5.0 m x 2.5 m (approx. WxLxH) Supply air ceiling : Filter ceiling approx. 3.2 x 1.8 meters Lamps: 2 x 2 pcs. recessed luminaires with 4 x 58 W each Entrance side: 4-wing folding gate 3.7 m x 2.4 m (approx. WxH) Escape door: 0.8 m x 2.0 m (approx. WxH) Rusting : no gratings, because of diagonal ventilation, no pit required! Heating unit : Gas surface burner, 128 kW Dry temperature: 80 degrees C Supply air unit: 10,000 m3/h; 3.0 kW Exhaust air unit: 10,000 m3/h; 3.0 kW Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Area Aschaffenburg Sell price: € 9,990,-, net from site incl. disassembly

1 Wulf steam boiler system Manufacture No. 3813 Year of construction 1993 Power: 8 to Damph per hour Up to 13 bar vapour pressure with laterally mounted steam pipe register with Weißhaupt Combi burner for gas and light oil with lying boiler feed water tank Capacity 8,000 l with all-round piping and Structural steelwork with steel fireplace with exhaust gas heat recovery register system with Wulf Elektro control cabinet 1 Wulf steam boiler system Manufacturing No. 3813 Year of construction 1993 Output: 8 to steam per hour Up to 13 bar steam pressure with laterally attached steam pipe register with Weißhaupt Combi burner for gas and light oil with horizontal boiler feed water tank Contents 8,000 l with all-round piping and steel construction with steel chimney with exhaust heat recovery register system with Wulf electrical control cabinet

Make : Lutro Year of construction : 2005 Dimensions : each 4.0 m x 10.0 m x 4.0 m (LW approx. WxLxH) Supply air ceiling : Filter ceiling over the entire surface Lamps above : 2 x 5 pcs recessed luminaires with 4 x 58 W each Lamps side : 2 x 3 pcs recessed luminaires with 3 x 58 W each Entrance side : Sectional door, 3.5 m x 4.0 m (approx. WxH) Escape door : 2 pieces, 0.8 m x 2.1 m (approx. WxH) 1 piece, 1.0 m x 2.1 m (approx. WxH) Rusting : All-field rusting Heating : Hot water heat exchanger 250 kW Energy saving : Heat exchanger Supply air unit : 45,000 m3/h; 2 x 7.5 kW motor Exhaust air unit : 45,000 m3/h; 2 x 7.5 kW motor Dry temperature : 60 degrees C Pipelines : Supply and exhaust air pipes, deflector hood, air intake curve Electrics : Control cabinet Location : Room Ulm Retail price : each € 15.900,- net, ex location incl. disassembly

Paint booth: The paint booth is a special system Make : Wolf Year of construction : Cabin 2011 Dimensions : 4.5 m x 4.8 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 2 recessed luminaires with 4 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Base system with full surface rusting Heating : approx. 200 kW electrically heated, but can be replaced by an oil or gas powered unit Dry temperature: 80 degrees C Supply air unit : 18,500 m3/h; 7.5 kW Exhaust air unit: 18,500 m3/h; 7.5 kW Pipelines : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Hanover Area Retail price : € 17.500,-, net ex site without dismantling

Powder incineration furnace 2,000 x 1,900 x 2,000 mm 1 inner dimension length 2,000 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m3/hr 10 Electric motors 1 pc. 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 33 kW = 28,380 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 Burner 1 pc. furnace is operated with gas burner 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

TO WHOM IT MAY CONCERN ; WE VE BELOW LISTED USED PARTS OF DEUTZ TBD 645 L CYLINDER HEAD EXHAUST CAGE - VALVE SPRING AND ROTOTOR ( LEFT ) 12PCS EXHAUST CAGE - VALVE SPRING AND ROTOTOR ( RIGHT ) 12PCS INJECTOR HOLDER WITH NOOZLE COOLED TYPE 12PCS AIR STARTER 12PCS FULL ROCKER ARM ASSY 12 PCS PLS REFER ATTACHED PICTURES. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Powder incineration furnace 2,000 x 1,900 x 2,000 mm 1 inner dimension length 2,000 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m3/hr 10 Electric motors 1 pc. 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 33 kW = 28,380 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 Burner 1 pc. furnace is operated with gas burner 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration oven 3,500 x 1,900 x 2,000 mm electric 1 inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m3/hr 10 Electric motors 1 pcs. 3 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 58 kW 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electrically heat-resistant fans and heat-resistant bearings, thermoblock has overheat protection 14 Burner 1 pc. oven is electrically heated 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration furnace 3,500 x 1,900 x 2,000 mm gas operation 1 inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m3/hr 10 Electric motors 1 pcs. 3 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 58 kW = 49,880 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 burner 1 pc. oven is heated with gas burner. 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration oven 4,500 x 1,900 x 2,000 mm electric 1 inner dimension length 4,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m3/hr 10 Electric motors 2 pcs. 2x 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 74 kW 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electrically heat-resistant fans and heat-resistant bearings, thermoblock has overheat protection 14 Burner 1 pc. oven is electrically heated 15 Exhaust air 1 pc. device for exhaust air pipe, manual f ...

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (110 kW) 6 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Charging: Exhaust gas turbocharger with water-cooled turbine housing Mixture cooler: two-stage mixture cooling with high and low temperature circuit Old part deposit: 6,000 euros

1. General specification -Maker MES (Mitsui Engineering & Shipbuilding Co., Ltd.) Japan -Mfg. data 2014 -Running time Zero hoursP 2. Steam turbine specification -Maker MES (Mitsui Engineering & Shipbuilding Co., Ltd.) Japan -Turbine type CD30.46 -Steam in let pressure 70barG -Steam inlet temperature 490℃ -No.1 Extraction steam P & T 31.5barG & 388.5℃ -No.2 Extraction steam P & T 5.5barG & 223.3℃ -Nor. Exhaust pressure 0.11barA -Turbine speed 3,600 rpm -Rated output 97,500 kw -Weight 132 ton -Number of stages 16 -Number of 1 stage nozzle arcs 4 -Steam inlet flange ASME1500#RJ12” x 2 -No.1 extraction steam flange ASME 600#RF 16” -No.2 extraction steam flange ASME 150#RF 32” -Steam exhaust flange ø3,600(inner dia.) 3. Synchronous generator -Standard IE60034-1(2010), IEC60034-3(2007) -Location Indoor -Cooling system Totally enclosed type with top-moun ...

Key data: 450 , 450 , 600

Convection chamber furnace electr. 450°C with supply and exhaust air system motorized Demonstration device, unused, 24 months warranty -Temperature max.; 450 °C -Volume of oven space: 120 liters -Outside: 1200 x 1470 x 1575 mm(W x D x H) -Oven space: 450 x 600 x 450 mm (W x D x H) -Controller C440, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: motor-driven supply and exhaust air system -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: max 10 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3Ph/PE 50 Hz, without RCD Documentation Visit in our warehouse by appointment.

Paint shop Memmingen: Paint booth, special size: Make : LUTRO Year of manuf.: 1995 / 2017 - new units and pipelines, LED lighting, etc. Dimensions : 5.6 m x 9.48 m x 4.7 m (approx. WxLxH), total height 5.5 m Supply air blanket : Filter ceiling Lamps : 2x4 pcs LED inclined recessed luminaires + 2x3 LED wall recessed luminaires on the side Entrance side : Roller shutter 5.3 m x 4.2 m (approx. WxH) Exit side : Sliding gate (fire protection gate) is not included in the scope of delivery Escape door: 3 pieces: 0.95 m x 3.0 m; 0.95 x 2.0 m; 0.75 x 2.0 m (approx. WxH) Rusting : without rusting, without substructure, we have ev. Grates in stock Heating unit : approx. 250 kW, gas surface burner Energy saving: Heat recovery Dry temperature: 80 degrees C Supply air unit : approx. 22,000 m3/h Exhaust air unit : approx. 22,000 m3/h Pipelines : supply and exhaust air pipes, deflec ...

Key data: 260 , 1250 , 1250

Circulating air chamber dryer electric 260°C, Nabertherm KTR 3100 with C540 and run-inchins Demonstration device, unused, new machine warranty, immediately available Convection oven, high air exchange for fast drying processes -Inside w x d x h 1250 x 1250 x 2000mm -Outside w x d x h 2150 x 1380 x 2960 mm -Capacity 3100 liters -Tmax 260°C -Controller C540/ 10 programs per 20 segments freely programmable -NtLog for controller Record data via USB stick -Temp. Uniformity according to DIN 17052-1 up to +/- 3 °C -Air circulation 6400 m³/h -Exhaust air volume flow 125m³/h -Additional equipment: Motor-closing fresh air and exhaust air flaps Entry rails -Connection power 31.2 KW -Net weight 1800 kg -not suitable for solvent-based substances -incl. documentation, CE declaration We are happy to offer installation and commissioning.

Bunk oven Friedrich E6-6/8 Nostalgia Bunk oven Friedrich E6 6/8 with 6 floors with exhaust hood - 6 floors each 60/80 - Upper and lower heat can be controlled separately - digital control - with fermentation cabinet - with exhaust hood - mobile on wheels

Key data: 850 , 400

Make and Model: Jenbacher J 320 Fuel Landfill Year: 1998 and rebuilt in 2015 on 40,000 hours Hours : 86,000 Capacity kW : 850 Frequency : 50 Hz Voltage: 400 V Scope of supply: Complete Containerised Set, Engine, Alternator, Frame, Control system, Gas Line, Cooler, Exhaust system Service History: Major service in 2015. Cooler is new. Exhaust system is restored with new parts. Available for sale Now. Price: €20,000

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

Many thanks for your interest in our machinery, please find below our offer: Manufacturer : Barth Type : NR 3000 batch roaster Year of made : 2000 Output /h approx. : between 800-1250 kg Nuts Consisting off : Plant components: - Hopper for nut roasting machine NR 3000 (650kg whole nuts), with scale - Nut roasting machine NR 3000 batch size 400-620kg/batch, roasting time 20-40min) - Roasted air conditioning - HWP cooling system - Cooling air supply - increased stand frame - aspiration device stand frame - aspiration device cooling zone - thermal exhaust gas cleaning system TNV 8000 (8000m³/h, residual content in the clean gas 50mg/C/m³) - Exhaust pipe TNV - free-standing 2-way steel chimney system (height 21500mm, outside diameter 1450mm, 2 pcs. Stainless steel inner pipes 500mm) with thermal insulation - Fully automatic control unit As well as all pipes, p ...

Make : Wolf Built in : 1988 Dimensions : 4.1 m x 7.1 m x 3.0 m (approx. WxLxH) Supply air cover : Filter ceiling Lamps : 2 x 4 pcs. Recessed luminaires of 4 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 2 x 0.65 m x 2.0 m (approx. WxH) left+right Roller door : 6.0 x 2.3 m (approx. WxH), laterally between paint booth and dryer Rusting : Whole surface grating 12 pcs 1420x640 mm, 12 pcs 1300x525 mm, support rod 640x40x3 mm, 525x40x3 mm Additional equipment : pneumatic lift, JAB, 2,5 t, 11 bar, Remark : Panels in the lower area rusty Heating unit : 300 kW, gas burner Drying temperature: 80 degrees C Supply air unit: 22,000 m3/h; 7.5 kW Exhaust air unit: 21,000 m3/h; 5.5 kW Piping : supply and exhaust pipes, deflector hood, etc. Electrical : Control cabinet

Steam generation plant consisting of Double flame tube boiler with economiser, 2 x SAACKE burner Teminox for natural gas H, calorific value HS 11.4 kJ/Nm³, 14MW (2 x 7 MW), 17 to. Saturated steam at 20 bar ü (25 bar hp). Boiler: Manufacturer LOOS Deutschland GmbH Type ZFR 2300 Type of large-capacity water boiler with two flame tubes (three-speed) and a flue gas water preheater (Economizer) Permissible operating pressure (PS): 24-25 bar Permissible operating temperature: 224°C Permissible steam output: 23 to. Saturated steam Burner: 2 x SAACKE Type Teminox GS 75-22 Fuel: Natural gas There is a soundproofing hood for each burner Fireplace: 37 meters above ground Outlet area: 0.507 m² Stainless steel double fireplace Water treatment plant Manufacturer CHRIST consisting of softening system and downstream reverse osmosis system Complete installation from y ...

Cylinder cover Recon The cylinder covers were equipped with the following new parts: - Inlet and exhaust valve guides. - Intake and exhaust valve seats. - Inlet and outlet valves. - Nozzle protection tube. - Rotary device. The cylinder covers were tested with 10 bar water pressure. The cylinder covers were planned. The valves ground in with the seats and mounted with new valve stem seals. Price per piece.

2 used steam turbine units available: 1. Type: B5 S2 + G IV Year: 1991 Turbine output: 294 kW at 1.35 bar and 170 C With exhaust gas heat exchanger 2. Type: B5 S3 + G IV Year: 1992 Turbine output: 330 kW at 1.35 bar and 170 C With exhaust gas heat exchanger Subject to prior sale - Errors possible

A used shared oven Miwe Condo CO 5.0806 from 2011 is currently for sale and immediately available in our warehouse in Bielefeld. This stove is equipped with stone slabs, with 5 floors each 80x60cm and digital Miwe FP control and exhaust hood including exhaust motor. Bakery Shared Oven Miwe Condo CO 5.0806  -Type: CO 5.0806  -5 floors each for 1 sheet 80x60 cm sheets -each floor with separate Miwe FP control -each floor can be switched on and off separately -Upper and lower heat separately adjustable -each floor with separate swath box (steam) -requires fixed water connection -each floor with exposed glass door -Stainless steel cladding  -digital control -Oven can be moved on castors on swivel castors  Specifications:  400 / 230V 3/N/PE 50 Hz / 29.1 kW Year of construction 2011 External dimensions: Width 110cm Depth: 120cm Height: 191cm Floor entrance height: 17 ...

Miwe Condo Shared Store Oven Type: Co 40608 2D Specifications: 4 floors / each floor 60 x 80 cm Years of construction 2008 – 2012 each floor with stone baking slabs digital Miwe FP control Can be driven on castors 2 double-chamber floors with 1 controller each with exhaust hood including exhaust engine with fermentation cabinet Condition "good" the herds have a height of 13cm 19.1 kw 400/230V 3/N/PE Outside dimensions : Width:90cm Depth:120cm Height:210cm Several in stock!

Miwe Condo Shared Store Oven Type: Co 40608 2D 4 floors / each floor 60 x 80 cm Years of construction 2008 – 2012 each floor with stone baking slabs digital Miwe FP control Can be driven on castors 2 double-chamber floors with 1 controller each with exhaust hood including exhaust engine with fermentation cabinet Condition "good" the herds have a height of 13cm 19.1 kw 400/230V 3/N/PE Outside dimensions : Width:90cm Depth:120cm Height:210cm We have about 60 pieces of these condo ovens in stock!

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

ECAU Compact Cartridge Filter System 2XL Cartridge filter systems of the "Dustec" series combine the advantages of gravity-following falling flow with a moderate filter load due to large filter surfaces. The design advantages enable a compact housing design. The choice of different filter media allows the use for dust, welding fumes, granules and mist. The differential pressure-dependent compressed air cleaning ensures a long service life of the filter material. The "Dustec" is designed for recirculation mode. Due to the expansion with an exhaust air / recirculating air circuit, it can also be operated as an exhaust air unit. cartridge filter with 2 cartridges; Filter area: 40 m2 Filter material: Microfiber fleece filter class "M" Cleaning: 6 bar compressed air fully automatic Current type: 400V / 3 / 50Hz Power: 2,2KW Air flow: max. 2000 m3/h externally avai ...

215 MW Toshiba Inlet Steam Turbine & Generator (Unused and well maintained) New in 2008, this Power Plant has never been used and is available for immediate inspection and delivery. Never having been used, the Plant has no wear whatsoever. The Steam Turbine: Extraction & condensing, Inlet pressure: 104 bar, Output: 215MW Extractions: MP2: 22 bar, MPI: 10 bar, LP: 4.5 bar, Feed Water: 0.4 bar Minimum load: • No extractions, Only bleeds, Steam flow: 45 kg/s Maximum load: Steam flow: 270 kg/s The turbine is a Single Flow Extraction Condensing type. Steam initially enters the steam inlet flange near the end of the high pressure section and flows through the turbine stages toward the generator end of the unit. After passing through the turbine stages, the steam is exhausted to condenser. The exhaust hood is keyed to the foundation plates at a point near its center  ...

General Manufactured by TBMA Europe BV Type Har 200 #00271200 Key Features Material Steel Engine Nord 230/380V 055 kw Inlet diameter 200 mm Specified properties – rotary lock Material Steel Rotary lock Yes Rotor with scrapers Yes Rotor diameter 250 mm Rotor width 260 mm Number of faces 8 Compartment dimensions 100 mm x 260 mm Inlet diameter 200 mm Surface dimensions Inlet flange dimensions Ø 340 stc295 8xØ24 mm Exhaust Ø200 Exhaust flange dimensions Ø340 stc 295 8x Ø24 mm Installation height 370 mm Excluding Gaskets With Motor Yes Rotor speed 13rpm External Bearings Yes With socket gasket Yes Information Total height 370 mm Weight 160 Kg Floor area 650 mm x 650 mm Additional Specification

Type of imager Image quality Engine control External drum design Cast granite machine base High power Fiber Laser source, Laser class 1 CDI. Screen rulings up to 250 lpi, depending on imaging resolution Halftone: 1 - 99 % HighRes Optics: fully variable from 2540 to 4000 ppi on job to job base Grapholas Touch Exposer on Intel PC with Windows 7 Automatic mering via Automation Engine” in combination with Flexo Plate Making Module for AE or standlone Merger (requires Intel PC with Windows 7 ) Input file format: LEN or TIFF, compatible with all CDI family members RIP and screening options Esko software Plates Plate sizes Machine dimensions Installation requirements - Optional Imaging Engine - Industry standart PostScript/PDF RIP - Quality screening optimized for flexo (Circular, Double Circular dots) included in the RIP - HD Flexo Screening option for the finest print quali ...

System for the extraction of exhaust air from electroplating tanks and purification of the exhaust air by means of a washing process; Centrifugal fan, motor 15 kW, 1452 RPM

Paint booth: Make : SAIMA Year of manufacture : 2018 Dimensions: 3.95 m x 7.21 m x 3.25 m (approx. WxLxH) Supply air blanket : Filter blanket Lamps : 23 pcs. LED downlights Entrance side : 4-leaf folding gate 3.8 m x 3.1 m (approx. WxH) Escape door : lateral, 0.9 x 2.1 m (approx. WxH) Rusting : none, due to sidewall extraction on both sides Heating unit : approx. 255 kW, gas surface burner Drying temperature : 80 degrees C Supply unit : 33,000 m3/h; 11 kW Exhaust unit: 33,000 m3/h; 11 kW Pipelines : supply and exhaust air pipelines, deflector hood, etc. Electrics : Electrical cabinet Location : Münche area Selling price : € 16.990,- net ex site without dismantling

Leutenegger (Starrag) washing box Specifications Year of construction: 2000 Bathroom capacity: approx. 0.9 m3 Chemistry: Henkel P 3 Voltage: 3x400V/230V 50 Hz Supply line: 40 A Control voltage: 24 V DC Temperature max: 50° C Electric heating Heating capacity: 3x3.25 kW = 9.75 kW Working pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m3/h Shipping costs on request

olienherstellung =: PVC shrink and PET Line speed: 80 meters/min Final net film width: 4.2 meters Line speed: 80 meters/min Production capacity: 21 tons/day The machine includes: -Automatic turnstile unwinder 2 meters -Automatic turnstile -Winder 4.50 meters -Cooling system -automatic thickness control -automatic control of infrared heating -Automatic inline edge strip handling system -TCU -Controller fan -Cooling tower -Exhaust pipes -Exhaust hood -16 steel core width 4.8 meters -Complete spare parts (package purchased for 280.000 €) Dimensions approx. length 50 m x width 19.0 m x height 5.9 m

Shared oven WP Matador Store 6.4 A used electrically heated shared oven WP Matador Store 6.4 for bakery and confectionery is currently for sale and immediately available in our warehouse in Bielefeld. The stove is equipped with base and exhaust hood. Floor oven W&P Matador Store 6.4 - 4 floors each 60x40cm -per floor one sheet 60x40cm -1 x Hood 8 x ADK with RBA 0.1 kW 230 Volt - 1x base 6.4 600 - with exhaust air hood including vapour condenser -electrical data per floor: 3.6kW; 3-400V; 1.45 kW - Year of construction External dimensions approx. Width : 93cm Depth 100cm Height: 210cm incl. hood Floor entrance height 14cm Oven is functionally tested and cleaned -Oven can be inspected and tested in our warehouse

Waffle baking machine consisting of: - Leaf removal station -Control panel - Dough infusion station - Baking chamber - Burner equipment - Exhaust system with exhaust pipes - Service door - Waste scraper - Inlet conveyor -Switchboard - Waffle leaf relaxation The machine configuration is based on a wafer bread production concept. That is, wafer sheets are made and sliced. Optionally, we can add a cutting machine and a packaging machine to complete the line. The product looks and is used like a WASA crispbread, but is a waffle and much softer. Waffle bread is an interesting alternative to regular bread and not just a snack, but a real foodstuff. Height: 2450 mm Length: 16450 mm Depth: 1900 mm Baking plate format: 470 x 290 mm Pattern: Pimples Waffle sheet thickness: 4.8mm Electrical connection: 400 V/ 50 Hz Control: Siemens S 7 Baking plate heating: natural  ...

Floor oven Friedrich E6 8/6 bakery oven - 6 floors each 80x60 cm - each floor can be controlled separately with bottom and top heat - each floor with separate steam box - each floor with glass viewing glass - with exhaust hood incl. fan -digital control - Floor flaps are made of glass (visible) - Floor entrance height approx. 12.5 cm - Exhaust hood protrudes 22cm at the control - per floor 3,3kw all together 19,8 kW

Rack oven WP Rototherm REC 1020 Year:2007 4pcs - Rack oven circulator - for 60x80cm sheets - incl. ramp - with exhaust hood and fan motor - Baking time display on the exhaust hood -digital control - Fuel type oil burner - Door hinge to the right

Net price (excl. VAT) = 4.000,- € Gross price (incl. VAT) = 4.760,- € - - - - - Lister generator set 20 kVA incl. control cabinet + tank - - - - - Engine: - Lister (English manufacturer of diesel industrial engines) - Model: TR3 - 3 cylinders -Diesel -Air-cooled - 1500 rpm. - - - - - Generator: - Manufacturer: Stamford (England) - Power: 20 kVA - 230 / 400 Volt - 50 Hertz - - - - - Switchboard: - Start button to start - Generator monitoring: Volt, 3x Ampere, Hertz -Fuel gauge - Hour meter - 1x 400V 32A socket - - - - - Condition and origin: - The generator set has been completely rebuilt - The engine starts and runs great - The generator generates 400 V and 50 Hz - A test run with load acceptance was made - Substructure frame tank NEW - Exhaust NEW - Starter cables and terminals NEW - Fuel lines NEW - Oil and filter NEW - Air ...