exchanger used for sale

General SKU292W1597 MakeTransitherm LocationBarneveld TypeAD2000 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface25 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface25m² Tube capacity235 l. Number of tubes:91 Tube diameter25 mm Tube length3700 mm Max. temperature0°C/+300°C Shell capacity210 l. Shell diameter400 mm Shell length3840 mm Max. temperature0°C/+300°C Shell with expansion jointcheck Shell connectionscheck Information No.11043 Year of construction2004 Mounted on legscheck Floorspace0,70 x 0,70 m Total height1,20 mShell and tube heat exchange ...

Air recovery system. 400V, 50Hz, 2,65 kW

Brembana Helixchanger Heat Exchanger Notified body AIB VINCOTTE Pressure 4/10 bar Capacity 6600/3800L Hydr.press 7,5/14,3 bar

The heat exchanger furnaces are part of the system and were only ordered separately. The new price of the plant was thus over EUR 2 million. The official commissioning was in April 2024, but these were only test runs and not series operation. Technical Data – Modular Chamber Furnace Plant for Homogenization of Aluminum Bolts (Used Plant) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum bolts in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks Plant design The system essentially consists of: • 1 heating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air c ...

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible.

Fisher Type: Flash Pasteurizer Year: 1999 Efficiency: 120 Hl

Heat exchanger, construction heating, construction dryer, heating, hall heating, hot water exchanger, fan heater, heating, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -pure heat exchanger, only usable in conjunction with a heating unit (e.g. Wacker Neuson HP 252) -Type: HX 60 -Power: 43.5 kW -Quantity: 8 pieces available -Price per piece -Dimensions: 660/720/H1065 mm -Weight: 106 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, heat exchanger shell and tube heat exchanger -Type: BOF 806-0-4 -Contents: Jacket space 50.7 l / Tube space 22.0 l -Operating pressure: max. 16 / 10 bar -Dimensions: 2120/285/H305 mm -Weight: 146 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, seawater heat exchanger -Manufacturer: Funke, heat exchanger shell and tube heat exchanger -Type: BOF 807-0-4 -Contents: Jacket space bronze 35.6 l / Tube space copper 15.3 l -Operating pressure: max. 16 / 10 bar -Dimensions: 2480/360/H350 mm -Weight: 236 kg

Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Manufacturer: Jiangsu, heat exchanger type SL-421 -Pump: Aulank CPS-20 1.5 kW -Flow rate: 180 l/min -Container: Material stainless steel, with level indicator -Transport dimensions: 1180/780/H760 mm -Weight: 80 kg

Heat exchanger, rotary heat exchanger, exhaust air heat exchanger, microchannel heat exchanger, microchannel tube heat exchanger, condenser, evaporator coil, MCHE -Manufacturer: SunCo, microchannel heat exchanger -Type: SC-1800 -Heat exchanger: made of aluminum tubes with aluminum fins -Connection: with copper pipe, see photos -Dimensions: 1210/1150/H40 mm -Weight: 16.8 kg

Plate heat exchangers; isolated; on rack; width 50 cm, height 1.10 m, depth 20 cm, for an extra charge also with partial piping and 3 gate valves Loading FREE Truck

Stainless steel heat exchanger of the brand XCHANGER model C-125. C-125 Series heat exchanger, designed for heating and cooling low-pressure gas streams. High-performance modular equipment, ideal for applications such as post-cooling, dehumidification and air treatment in industrial systems. Manufactured with fin core and expanded tubes for maximum thermal efficiency and structural robustness. Front and rear access design allows core removal without disassembling the gas line. Suitable for pressures from vacuum to 15 PSIG High durability industrial construction Fog separator integration possible Connections adaptable according to need Material Stainless steel Technical characteristics Model C-125 Documentation No documentation Status Unused Manufactured by XChanger

MAFELCA brand stainless steel tubular heat exchanger of 43 m2 Year 2023. Connections DN50 PN16, DN150 PN16, DN450 PN10 Material Stainless steel Technical characteristics Year of manufacture 2023 Housing volume 875 L Volume of tubes 520 L Tube Steps 2 Number of tubes 162 Working temperature of the tubes -10/50 ºC Working pressure of the tubes 16 bar Working temperature of the housing -10/100 ºC Working pressure of the housing 10 bar Equipment dimensions Length of the tubes 4402 mm Inner diameter tubes 17 mm Transportation Information Length 5400 mm Width 920 mm Height 1250 mm Weight 1887 Kg Exchange Surface Exchange Surface 43 m2 Status In your state Manufactured by Mafelca

Vertical heat exchanger made of stainless steel from the brand TALLERES MAC of 48.5 m2. Year 2001. Material Stainless steel Technical characteristics Year of manufacture 2001 Number of tubes 203 Working temperature of the tubes 230 ºC Working pressure of the tubes -1 bar Working temperature of the housing 310 ºC Working pressure of the housing 5.39 bar Equipment dimensions Length of the tubes 4000 mm Outer diameter tubes 19.05X1.65 mm Transportation Information Length 4000 mm Width 850 mm Weight 1300 Kg Documentation Plans Exchange Surface Exchange Surface 48.50 m2 Status Reviewed Manufactured by Mac Workshops

Stainless steel tubular heat exchanger from the MAFELCA brand with an exchange area of 43 m2. Year 2023. Connections DN50 PN16, DN150 PN16, DN450 PN10 Material Stainless steel Technical characteristics Year of manufacture 2023 Housing volume 875 L Volume of tubes 520 L Number of tubes 162 Working temperature of the tubes -10/50 ºC Working pressure of the tubes 16 bar Working temperature of the housing -10/100 ºC Working pressure of the housing 10 bar Equipment dimensions Length of the tubes 4402 mm Outer diameter tubes 19.05 mm Transportation Information Length 5400 mm Width 920 mm Height 1250 mm Weight 1887 Kg Documentation Plans Exchange Surface Exchange Surface 43 m2 Status Reviewed Manufactured by Mafelca

ELCA brand heat exchanger of 10.2 m2, manufactured in 1989. Material Graphite Technical characteristics Year of manufacture 1989 Housing volume 60 L Tube Steps 1 Number of tubes 61 Working temperature of the tubes 160 ºC Working pressure of the tubes 3 bar Working temperature of the housing -25/+160 ºC Working pressure of the housing 3 bar Equipment dimensions Housing diameter 405 mm Length of the tubes 2000 mm Inner diameter tubes 20 mm Transportation Information Length 3000 mm Height 800 mm Weight 580 Kg Documentation Pressure Certificate Plans Exchange Surface Exchange Surface 10.20 m2 Manufactured by Elca

Stock number: A223, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Plate heat exchanger, Heating surface: 0,6 m², Dimensions: L 495 x W 198 x H 125 mm., Total height: H 215 mm., Working temperature: 0/95° C, Working pressure: 6 bar, Manufacturer: APV, Type: T 4, Year: 1989

Alfa Laval M/TL Series Plate Heat Exchangers Condition: unused Manufacturer: Alfa Laval Lund AB (Sweden) Type: M/TL Series Gasket Plate Heat Exchanger This type of heat exchanger is often used in: - Food and beverage industry (milk, beer, juice, etc.) - the chemical and pharmaceutical industry - HVAC systems (district heating/cooling) - Industrial process plants for heat recovery and energy optimisation

Industrial air handling unit / climate system Fully wired Equipped with fans and heat exchangers Excluding control box / control unit Never used Quantity Available: 2 Pieces Dimensions: 237 x 281 x 92 cm Equipped with 2 fans Fan type: EBM K3G355 Maximum free-blowing air flow: 3500 m³/h Equipped with 4 heat exchangers Heat exchanger type: Core RC160 H45 cm Fully modulating bypass control: 0–10 V Equipped with 2 adiabatic water cooling cassettes Cooling cassette type: Oxycom Power: 1100 W Supply voltage: 220 VAC Amperage: 5 A Version: horizontal AHU unit Suitable for industrial ventilation and climate applications Auction-ID: A1-41997-94

ensures efficient heat exchange for a Reduced footprint. They have been designed specifically for be integrated into air conditioning and refrigeration applications as evaporators and condensers in the chillers and heat pumps. NEW, the sale is for 1 unit Auction-ID: A1-47049-7

Industrial air handling unit / climate system Fully wired Equipped with fans and heat exchangers Excluding control box / control unit Never used Quantity Available: 2 Pieces Dimensions: 237 x 281 x 92 cm Equipped with 2 fans Fan type: EBM K3G355 Maximum free-blowing air flow: 3500 m³/h Equipped with 4 heat exchangers Heat exchanger type: Core RC160 H45 cm Fully modulating bypass control: 0–10 V Equipped with 2 adiabatic water cooling cassettes Cooling cassette type: Oxycom Power: 1100 W Supply voltage: 220 VAC Amperage: 5 A Version: horizontal AHU unit Suitable for industrial ventilation and climate applications Auction-ID: A1-41997-93

Flash pasteurizer for pasteurizing liquid food products. With pumps, preheater and control unit mounted on a common frame. Designed for a capacity of 1000 liters/hour., Additional title: Pasteurisation, Capacity: 1000 l/h, Compressed air: 6 bar for control air, Length: 1,7 m, Width: 1,2 m, Height: 2,5 m, Operation / Control: HMI on switch cabinet, Base construction: mounted on frame, Features: 2 x Alfa Laval plate heat exchangers, 2 x centrifugal pumps, pressure compensation tank, sight glass, temperature and pressure sensors, various other fittings and valves, HMI

Manufacturer: Kühni AG,Condition: used,Technical documents: drawing, various documents,Exchange surface: 40.0,last purpose: Pharmaceutical chemistry,Nameplate: Yes,Volume sheath space: 370,Material jacket: AISI316 (V4A) 1.4435,Max. permissible Operating overpressure jacket chamber: 2.0,Max. permissible Operating vacuum jacket space: 1.0,Max. permissible Operating temperature sheath space: 95,Volume pipe space: 285,Material pipes: AISI316 (V4A) 1.4435,Number of pipes: 168,Pipe length: 3200,Diameter pipes: 25,Max. permissible Operating temperature raw space: 95,Max. max. Operating overpressure raw space: 6.0,Diameter inside:

Additional title: one-stage, Allowable pressure (wort & water): 10 bar, Allowable temperature (wort & water): 120 °C, Test pressure: 13 bar, Volume: 572 l, Length: 1,537 m, Weight: 3898 kg, Features: DN80 dairy coupling; 421 plates; fluid group 1

This vertical plate heat exchanger from GEA Ahlborn is designed for efficient temperature exchange between two liquids. It is made of stainless steel and is designed for a permissible pressure of 16 bar and a permissible temperature of 100 °C, making it suitable for a wide range of industrial and brewing applications. The unit has a robust base construction with supports that ensure stability during operation. With dimensions of 1.55 m (L) × 0.45 m (W) × 1.50 m (H) and a weight of 1,500 kg, it offers a compact yet robust solution for heat transfer needs. Our team at VBW Asset Trade will be happy to answer your questions., Permissible pressure: 16 bar , Permissible temperature: 100 °C, Length: 1,55 m, Width: 0,45 m, Height: 1,50 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Base construction: mainstays

This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 240 hl/h 2 stages, Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm, Operating pressure: 23 bar, Length: 2000 mm, Width: 700 mm, Height: 2000 mm

horizontal tubular heat exchanger, Additional title: for CIP or hotwater, Media flow: 500 hl/h, Working pressure orifice baffle: 10 bar, Working pressure piping: 8 bar, Working temperature piping: 200 °C, Length: 1,05 m, Width: 0,6 m, Height: 1,1 m, Weight: 300 kg

Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h, Additional title: 2-stage heat exchanger, Capacity: 600 hl/h, Hot water: 750 hl/h, Operating pressure: 21 bar, Operating temperature: 100 °C, Length: 2,15 m, Width: 0,95 m, Height: 2,15 m, Weight: 5000 kg, Material: EPDM HT / NBR / 1.4439

Stock number: A212, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube heat exchanger, Heating surface: 4,03 m², Inner dimensioner: L 1900 x W 300 mm., Outer dimensioner: L 2050 x W 400 mm., Insulated: Yes, Product pipes: 27 pcs. Ø 1

ATLAS COPCO GA 26 VSD FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 26 VSD FF Machine type: Screw compressor with integrated air dryer and heat exchanger Year of manufacture: 2010 Operating hours: approx. 60000 h Weight: approx. 590 kg Dimensions (L x W x H): approx. 1200 x 1800 x 1500 mm Technical details: Rated power: 26 kW Working pressure: 12.8 bar Drive type: Inverter (VSD – Variable Speed Drive) Integrated air dryer: yes Integrated heat exchanger: yes Description: Industrial screw compressor Atlas Copco GA 26 VSD FF equipped with inverter drive technology for energy-efficient operation. The unit includes an integrated air dryer and heat exchanger, ensuring high-quality compressed air supply and optimized performance for industrial applications. Auction-ID: A7-47066-17

Year of construction: 2021, S/N: NH21103879A-3, Dimensions: approx. 130x88x45 cm (HxLxD). Location is not suitable for heavy equipment. Border of the work area will be removed in advance. Any coolant will be removed beforehand. Auction-ID: A1-46820-18