exchanger used for sale

Spirax Sarco PHS Easiheat Heat exchanger system 2017, Pre assembled skid mounted packaged heat exchanger system, touch screen control, with Alfa Laval heat exchanger, see plates for all spec

AI Overview, A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3], Core System Components & Description, Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters):, Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube., Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes., Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid ...

1540mm(W) x 4600mm(L) x 700mm(H) SS304-2B, 3mm PLEASE CONTACT Aaron Tan (+6017369 8203) MALAYSIA NUMBER LOCATED AT F11AW

Volume: 5.2 l Test pressure: 30 bar Permissible temperature: up to approx. 120 °C Auction-ID: A1-51321-56

Volume: 5.2 l Test pressure: 30 bar Permissible temperature: up to approx. 120 °C Auction-ID: A1-51321-60

Volume: 5.2 l Test pressure: 30 bar Permissible temperature: up to approx. 120 °C, with motor EMF 0.37 kW Auction-ID: A1-51321-64

Volume: 5.2 l Test pressure: 30 bar Permissible temperature: up to approx. 120 °C, with motor EMF 0.37 kW Auction-ID: A1-51321-61

Volume: 5.2 l Test pressure: 30 bar Permissible temperature: up to approx. 120 °C Auction-ID: A1-51321-57

Volume: 5.2 l Test pressure: 30 bar Permissible temperature: up to approx. 120 °C, with motor EMF 0.37 kW Auction-ID: A1-51321-65

Volume: 5.2 l Test pressure: 30 bar Permissible temperature: up to approx. 120 °C Auction-ID: A1-51321-58

Volume: 5.2 l Test pressure: 30 bar Permissible temperature: up to approx. 120 °C Auction-ID: A1-51321-59

Serial number: 2-40965. Power: 2.3 kW. Year of manufacture: 10/2019. Auction-ID: A1-51529-17

Number of tubes: 16x. Tube length 650cm. Tubes diameter 150mm. Equipped with Sacome heat exchangers. Auction-ID: A1-42990-225

Sheet dimensions: 900 x 400mm. Number of plates: approx 75x pieces. Weight: 342kg. Volume: 25.5 liters. Auction-ID: A1-42990-40

Sheet dimensions: 900 x 400mm. Number of plates: approx. 50 pieces. Weight: 322kg. Volume: 18.3 liters. Auction-ID: A1-42990-36

Plate dimensions: 1700 x 400mm. Number of plates: approx 100x pieces. Own weight: 1060kg. Volume: 90.17 liters. Auction-ID: A1-42990-35

Tube side: max. working pressure 6 bar, max. temperature 40°C, contents 9 L Shell side: max. working pressure 10 bar, max. temperature 65°C, contents 15 L Auction-ID: A1-51692-504

Pallet included Auction-ID: A1-50943-410

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

Vertical heat exchanger made of stainless steel from the brand TALLERES MAC of 48.5 m2. Year 2001. Material Stainless steel Technical characteristics Year of manufacture 2001 Number of tubes 203 Working temperature of the tubes 230 ºC Working pressure of the tubes -1 bar Working temperature of the housing 310 ºC Working pressure of the housing 5.39 bar Equipment dimensions Length of the tubes 4000 mm Outer diameter tubes 19.05X1.65 mm Transportation Information Length 4000 mm Width 850 mm Weight 1300 Kg Documentation Plans Exchange Surface Exchange Surface 48.50 m2 Status Reviewed Manufactured by Mac Workshops

ELCA brand heat exchanger of 10.2 m2, manufactured in 1989. Material Graphite Technical characteristics Year of manufacture 1989 Housing volume 60 L Tube Steps 1 Number of tubes 61 Working temperature of the tubes 160 ºC Working pressure of the tubes 3 bar Working temperature of the housing -25/+160 ºC Working pressure of the housing 3 bar Equipment dimensions Housing diameter 405 mm Length of the tubes 2000 mm Inner diameter tubes 20 mm Transportation Information Length 3000 mm Height 800 mm Weight 580 Kg Documentation Pressure Certificate Plans Exchange Surface Exchange Surface 10.20 m2 Manufactured by Elca

Stock number: A223, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Plate heat exchanger, Heating surface: 0,6 m², Dimensions: L 495 x W 198 x H 125 mm, Total height: H 215 mm, Working temperature: 0/95° C, Working pressure: 6 bar

Stock number: A212, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube heat exchanger, Amount of tubes: 27 pcs., Product tube diameter: Ø 1, Insulated: Yes, Heating surface: 4,03 m², Inner dimensioner: L 1900 x W 300 mm, Outer dimensioner: L 2050 x W 400 mm

Equipment: Insulation,Manufacturer: Tetra Pak Processing,Condition: used,Other: 8 minutes Hot holding Pipes DN 80 Length: 647 meters Manufacturer: Tetra Pak Weight approx. 7 t ,Remarks: Wall thickness of the pipes 2mm (1.7mm in the bend area) 6 height-adjustable feet Smaller dents in the insulation jacket Insulation jacket is no longer present in 2 parts (see photos),last use: dairy,Nameplate: No,Insulation: available,material insulating jacket: stainless steel,material pipes: AISI304 (V2A) 1.4301,total height: 3.200,total width: 1.550,total length: 6.530

Equipment: Insulation,Manufacturer: PAC Pharma-Anlagen-Consult GmbH,Condition: used,Other: Outer diameter of pipes approx. 10 mm,Exchange surface: 0.99,Last use: Pharmacy,Type plate: Yes,Insulation: available,Material insulation jacket: Stainless steel,Volume of jacket space: 7,Material jacket: AISI316 (V4A) 1.4571,Max. permissible size. Operating overpressure jacket space: 6,0,Volume pipe space: 3,Number of pipes: 20,Pipe length: 1980,Diameter pipes: 8,Max. permissible Operating temperature raw space: 144,Max. max. Operating overpressure raw space: 7.0,Diameter outside: 200,Diameter inside: 86,Total length: 2,120

Equipment: Insulation,Manufacturer: Barriquand Echangeurs,Condition: Used,Other: Replacement area: 4 (2 x 2) m²Side A:Content: 9 liter max. Operating overpressure: 7 permissible Operating temperature: -40/+20 CSpart B:Content: 29 liter permissible Operating overpressure: 8 barzul. Operating Temperature: -40/+20 C ,Exchange Area: 4.0,Last Use: Pharmaceutical Chemistry,Nameplate: Yes,Insulation: Available,Insulation Material: Armaflex

Equipment: Insulation,Manufacturer: Alfa Laval,Condition: used,Other: Dents in the insulating jacket 1 Heat exchanger has a total height of approx. 230 mm due to a flanged connection,Technical documentation: Drawing,Exchange surface: 11.5,last use: Pharmaceutical chemistry,Nameplate: Yes,Insulation: available,Material insulating jacket: Aluminium,Volume sheath space: 226,Material jacket: AISI316 (V4A) 1.4404,Max. permissible Operating overpressure jacket chamber: 4.2,Max. permissible Operating vacuum jacket space: 1.0,Max. permissible Operating temperature sheath chamber: 200,Volume pipe chamber:

Manufacturer: Industrieanlagentechnik Frauental GmbH,Condition: used,Other: 1 connection bent (see photos) Weight: 1400 KG,Technical documents: drawing, acceptance certificate,Exchange surface: 13.8,last purpose: vapour water,nameplate: Yes,Volume sheath space: 1.400,Material jacket: AISI316 (V4A) 1.4571,Max. permissible Operating overpressure jacket chamber: 0.5,Max. permissible Operating vacuum jacket space: 1.0,Max. permissible Operating temperature sheath chamber: 200,Volume pipe space: 400,Material pipes: AISI316 (V4A) 1.4571,Max. permissible Operating temperature raw space: 100,Max. max. Operating overpressure

Used plate heat exchanger made by MYSAK GROUP, model PSR 3500. Used for heating juices. Technical specifications: - Electrical power of the circulation pump: 180 W - Capacity: 3,500 l/h - Saturated steam requirement: 600 kg/h - Saturated steam pressure: 2 bar - Process water requirement: 35 l - Air pressure: 8 bar - Net weight of the unit: approx. 650 kg

Stock number: A226, Volumen: 2.813/2.910 litre, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Plate heat exchanger, Heating surface: 2.52 m², Working temperature: -10/+150° C, Working pressure: Max 16 bar, Dimensions: L 180 x W 180 x H 630 mm., Connections: 4 pcs. Ø 1½, Other: Specially developed for district heating and district cooling systems

Additional title: one-stage, Allowable pressure (wort & water): 10 bar, Allowable temperature (wort & water): 120 °C, Test pressure: 13 bar, Volume: 572 l, Length: 1,537 m, Weight: 3898 kg, Features: DN80 dairy coupling; 421 plates; fluid group 1

horizontal tubular heat exchanger, Additional title: for CIP or hotwater, Media flow: 500 hl/h, Working pressure orifice baffle: 10 bar, Working pressure piping: 8 bar, Working temperature piping: 200 °C, Length: 1,05 m, Width: 0,6 m, Height: 1,1 m, Weight: 300 kg

ALFA LAVAL brand plate exchanger model M6 FM, made of 316 stainless steel. INPUT - OUTPUT S1 - S2 S3 - S4 Volume 3 L 3 L Design pressure 0/10 bar 0/10 bar Design temperature 0/30 ºC 0/20 ºC Test pressure 13 bar 13 bar Maximum working temperature 30 ºC 20 ºC Year of manufacture 2014 Number of Plates 19 Unused

ATEX tubular heat exchanger made of 316L stainless steel from the CHROMALOX brand model TMXXB-12-047P-E2XX, 3.3 m2 Year of manufacture 2016 Number of tubes 24 Tube length 3600 mm Outer diameter tubes 12 mm Exchange area 3.30 m2 Transportation Information Length 4150 mm Width 400 mm Height 600 mm Unused

Stainless steel tubular heat exchanger from the MAFELCA brand with an exchange area of 43 m2. Connections: DN50 PN16, DN150 PN16, DN450 PN10. Technical characteristics Year of manufacture 2023 Housing volume 819 L Tube volume 497 L Number of tubes 162 Working temperature of the tubes -10/50 ºC Working pressure of the tubes 15 bar Working temperature of the housing -10/160 ºC Working pressure of the housing 8 bar Equipment dimensions Tube length 4,102 mm Outer diameter tubes 19.85 mm Transportation Information Length 5,400 mm Width 920 mm Height 1,250 mm Weight 1,887 Kg Documentation Plans Exchange area 43 m2 Status Reviewed

Shell-and-tube heat exchanger stainless steel Manufacturer: SPIRAX SARCO Fabr. No. 3640 Jackets and tubes made of 1.4571 Power 600 kW 7,400 litres of water from 10 °C to 80 °C at 8 bar saturated steam and 90 °C condensate temperature Pipe length 2.45 m, total length 2.60 m, diameter 18 cm Around the tubes: Pressure 13 bar Operating temperature 200 °C Capacity 33 litres In the tubes: Pressure 10 bar Operating temperature 120 °C Capacity 18 litres Product page both DN 40 flange Most Fabulous DN 50/DN 25 Flange

ATLAS COPCO GA 26 VSD FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 26 VSD FF Machine type: Screw compressor with integrated air dryer and heat exchanger Year of manufacture: 2010 Operating hours: approx. 60000 h Weight: approx. 590 kg Dimensions (L x W x H): approx. 1200 x 1800 x 1500 mm Technical details: Rated power: 26 kW Working pressure: 12.8 bar Drive type: Inverter (VSD – Variable Speed Drive) Integrated air dryer: yes Integrated heat exchanger: yes Description: Industrial screw compressor Atlas Copco GA 26 VSD FF equipped with inverter drive technology for energy-efficient operation. The unit includes an integrated air dryer and heat exchanger, ensuring high-quality compressed air supply and optimized performance for industrial applications. Auction-ID: A7-51645-11