exch plate used for sale

spindle diameter: 125 mm x-travel: 2500 mm y-travel: 1900 mm w-axis: 1100 mm radial face slide travel: mm rotary table:: 1800x1300 mm table adjustable: 1000 mm digital readout: Pfillips workpiece: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL SPECIFICATIONS Manufacturer: HENKE Designation: Production plant for concrete block slabs Type: UNI 2000 Year of construction: 1995 Operating hours: 11,543 h COMPOSED OF: Item 010) Fully automatic rotary table top pressure press UNI 2000/600/7 Item 020) Attachment distribution device for fine-grained attachments Pos. 030) Fully automatic dividing disc dosing unit with 8-fold ejection Item 040) Fully automatic direct washout system "WESER 100/2" for flat laying (horizontal) Item 050) Moulding frame device 400 x 400 mm, 2-fold Pos. 070) 2 x chain conveyor 1.50 m long Item 080/120) Pallet destacker Item 090) Cleaning brush Item 100) Pallet oil roller Item 110) Intermediate transport Pos. 130) Plate removal device Item 160) Stacking arm with bearing block Item 170) Chain conveyor 5 m long Pos. 180) 2 x Plate Pack - Lifting Item 190) Parcel push-off device  ...

spindle diameter: 125 mm x-travel: 8000 mm y-travel: 3000 mm spindle bore: 240 mm w-axis: 1650 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7000 mm y-travel: 2000 mm taper ISO: 50 w-axis: 1100 mm z-axis: 350 mm voltage: 400 V total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 4000 mm y-travel: 2500 mm z-travel: 7000 mm taper ISO: ISO 50 P.D.B. total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 205 mm x-travel: 10000 mm y-travel: 2500 mm w-axis: 500 mm spindle travel: 1250 mm Control: Heidenhain type: TNC 355 spindle taper ISO: 50 transmission ratio: 2 feed - independent: 0-3000 mm spindle motor: 37 kW total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: 14,1x3,2x5,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

M. No.: 1166

Clamping plate, plate field, grooved plate -Clamping plate: grooved plate -Length: 310mm -Width: 310mm -Plate height: 65 mm -Weight: 44 kg

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 458/273 mm -Height: 21 mm -Delivery of: steel/stainless steel cover plates possible -Weight: 3 kg

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet -Mounting plate for: control cabinet -Dimensions: 1895/500/22 mm -Weight: 28 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 195 mm -with: T slot 10 mm -Thread intake pitch: 3 mm -Weight: 5.7 kg

length: 5200 mm width: 2000 mm Thickness: 400 mm number of T-slots: 6 T-slot - width: 32 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Macbending SMB200-2000/8-10 4 rolls plate rolling machine Full automatic Lifting System Side Supports Machine is like new condition

Akbend AHS 20/06 Plate rolling machine - 4 rolls 2013

TECHNICAL CHARACTERISTICS Year 2018 Length 1000 1.5mm sheet metal Roller diameter 75mm Voltage 400V Frequency 50Hz Power 0.75Kw Current 1.9A 3PH Revolutions 1400r/min

Akyapak AHS 25/13 4 rolls Plate Rolling Machine Side supports Lifting system

Akyapak AHS-10/14x3100 Hydraulic Plate Rolling Machine Machine is in good condition

Sahinler 4R HSS 25-380 4 rolls plate rolling machine Working length : 2500 mm Maximum thickness : 30 mm

Reconditioned 3 rolls bending machine Maximum lenth: 2500mm, Maximum thickness: 15mm, Minimum rase: 300mm.

Sertom 3000 mm x 6 mm Plate rolling machine Mechanical Plate rolling machine Year 1968

Turkish 70 mm thickness 3 rolls plate rolling machine Machine is in excellent condition Bending length : 3000 mm Bending thickness : 70 mm Lifting system Pre bending Diameter of top roll : 700 mm PLC Control

UBBDA Three Roll Plate Bending Machine The three-roll sheet bending machine is designed for the production of cylindrical and conical sheet shells. Electric motors 42 kW, 580 rpm, 750\1500 rpm Dimensions 12900x5300x5620 Gross weight 166260 t

Bendmak APAS 360 hydraulic plate rolling machine Machine is in excellent condition Maximum thickness : 25 mm Top roll diameter : 350 mm

Working length : 2000 mm Maximum thickness : 10 mm Machine is in good condition http://www.akyapak.tr/kataloglar/01-Bending(TR-EN-Web).pdf

Sahinler 4R HSS 30-400 Plate Rolling Machine Bending length : 3100 mm Maximum bending thickness : 30 mm Upper roll diameter : 400 mm Machine is in good condition

Machine is like new Working length : 2050 mm Max. thickness : 10 mm

Working width : 2500 mm Max. thickness : 48 mm Upper roll Ø : 470 mm Lower/lateral roll Ø : 450 mm

Comal Alpha 160/20 2050 Plate Rolling Machine Machine can be seen under power

Oztas SMR-S 2070 x 170 3 rolls plate rolling machine Machine is like new condition

AB BACKTEMANS 3 rolls plate rolling machine Machine is in good working condition Maximum thickness : 30 mm

Sahinler 4RHSS 32-350 Plate rolling machine - 4 rolls Machine is in good condition Side supports Lifting system NC Control

Birlik 3 Rolls Plate Rolling Machine Machine is in very good condition Bending length : 3030 mm Bending capacity : 6 mm Roll diameter : 220 mm Power : 5,5+3 Kw

Manufacturer SMT-Pullmax Kumla Model PV 7 H Year 1982 Working length : 3000 mm Max. thickness : 25 mm

Cylinder faction 4 rollers and width 2 mtr. The machine is located in Spain.

Plate rolling machine - 4 rolls Manufacturer Boldrini Model / capacity 250046 mm Year 1977

Sahinler 4R HS 30-260 4 rolls plate rolling machine Conical bending is also possible Maximum thickness : 15 mm

Sahinler 4R HSS 20-460 Hydraulic 4 rolls plate rolling machine

spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12500x5500 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sahinler 4R HS 30-260 4 rolls plate rolling machine Machine is in good condition

spindle diameter: 225 mm x-travel: 8000 mm y-travel: 5600 mm z-travel: 2100 mm w-axis: 1400 mm spindle turning speed - stepless: 0-650 U/min spindle taper ISO: 60 feed stepless: 5 - 3000 mm/min rapid traverse: 5 m/min weight of the machine ca.: 150 t dimensions of the machine ca.: 12 x 5 x 8 m total power requirement: 120 kW Ram type horizontal boring machine was reconditioned and modernized in 2006, original yom was 1972. Control Siemens 840 C. Machine will come with tools and a vertical milling head. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Onaran 3000 mm x 40 mm 4 Rolls Plate Rolling Machine Roll diameter : 400 mm Bending thickness : Up to 40 mm Bending length : 3000 mm Hydraulic side supports All maintenance has been done Machine is in very good condition

Bendmak APAS 360 4 rolls plate rolling machine Working length : 3100 mm Maximum thickness : 40 mm Machine is in excellent condition

Akyapak AHS 20/16 4 Rolls Plate Rolling Machine Max thickness : 20 mm Working length : 2100 mm

spindle diameter: 130 mm x-travel: 7000 mm y-travel: 2000 mm taper ISO: 50 w-axis: 1100 mm z-axis: 350 mm voltage: 400 V total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m Universal milling head Heidenhain D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 10000 mm y-travel: 3500 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 workpiece weight: 300 t turning speeds: 1620 U/min spindle taper ISO: 50 One direction thrust bearing: 2 Angle head: 2 power capacity: 76 kW Plate area: 12000x9000 mm rotary table:: Colgar type: TRT1500 mm table surface area: 2000x2500 mm Table load: 20000 kg Travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Plate area: 109 m² Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm total power requirement: 4,5 kW weight of the machine ca.: 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel. Manual operati ...

Akyapak AHS 8/10x2100 4 rolls plate rolling machine Machine is in good working condition

length: 800 mm width: 500 mm table height: 20 mm Total weight, approx.: 60 kg dimensions of the machine ca.: 0,80 x 0,50 x 0,10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AGFA Imaging Plate System / CR System CR 30-X (for Veterinarian) Primary processing station 3 CR cassettes • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or system components must be carried out by the manufacturer or by a specialist or technician authorized b ...