exch plate used for sale

M. No.: 1166

Three T-slot plates of a copy-fraes machine from Lid are offered. The T-slot plates can be mounted as a cross table. Scope of delivery only according to photos, without spindles. If you are interested, please request more photos. Further spare parts of lide e.g. towing table of a KF3 pre-wheels. Please ask. Special price Lid cabinet tool cabinet

AGFA Imaging Plate System / CR System CR 30-X (for Veterinarian) Primary processing station 3 CR cassettes • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or system components must be carried out by the manufacturer or by a specialist or technician authorized b ...

- Retaining plate MWM 12300186 - Suitable for several motors - Please note! Price per piece! - 12300186 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating ne ...

Magnetic plates for letterpress; 3x A4 available (format 306x217x22mm); 3x A5 available (format 217x153x22mm); 6x A6 available (format 153x108x22mm).; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...

Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment o flat pile feeder 1st folding unit: o 4 buckle plates o Festa foldingrolleradjustment o noise prevention ; working condition

Manufacturer / Origin: Bacher / Germany (EU)

Siemens Spare Parts

M. No.: 5927/37

M. No.: 6513/19

Plate filters for liquid media

Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder o pallet feeder (MBO) o MC control 1st folding unit: o 4 buckle plates o rear-mounted slitter shafts o noise prevention 2nd folding unit: o 4 buckle plates o rear-mounted slitter shafts o noise prevention 3rd folding unit: o 2 buckle plates o rear-mounted slitter shafts o noise prevention delivery: o belt delivery ; working condition

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 /2025 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fas ...

Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring Table with Aluminum Measuring Plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Aluminium plate: 5 cm thick, with mounting threads Drawer cabinet manufacturer: Garant (Hoffmann Group) Number of drawers: 2 Material: Aluminum Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

2 pcs HALDER interchangeable plates V70, 500 / 400 mm, groove distance 70 mm

cast-ribbed clamping plate with T-swallowtail grooves, approx. 5400 x 2200 mm, water gutters on the face, weight approx. 8 t

Pressing plate of BRUDERER BSTA 41 type W x D x H = 660 x 550 x 95 mm Hole = 500 x 100 mm

6x NUMMERATORS CROSS PLATE, FORWARD, SMALL No. of the Wheels: 7 Fig.Size: 3/16 Prefix Arm: RA

Anilox - cylinders and plates washer

Used DSI V-3 36/100 vertical plate freezer on Freon / NH3 with 36 stations. the freezer can be set to 3 different sizes per station with dividers. This makes it possible to freeze different products per station. Inner dimensions 1 station: 1060x100x480 mm (LxWxH). Capacity and example based on: 51,9 kg fish fillet per station. 36 x 50,9 liter freezing stations. Product temperature from +10°C to -18°C. Duration of one cycle: including defrost, loading and unloading times: 185 min Evaporation temperature of -34°C. Fish fillet: 605,9 kg/hr Capacity and example based on: 48,3 kg plat and herring per station. 36 x 50,88 liter freezing stations. Product temperature from +10°C to -18°C. Duration of one cycle: including defrost, loading and unloading times: 190 min Evaporation temperature of -34°C. Plat and herring: 549,5 kg/hr For more information please feel free  ...

all stainless steel belt width 640 mm natural gas 16 kW 414 kW heat capacity 3 x 400 V gas pressure 30 mbar

sell used 60 he Pall diatomaceous earth-EK layers filter with 100 EK layers and 21 frames of diatomaceous earth

Technical data for the footplate: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Footplates, new Type designation: FT111 suitable for frame profile width 100 mm Material colour: RAL 5010 Gentian Blue Overall width: 175 mm Total depth: 105 mm Material thickness: approx. 6.00 mm Weight: approx. 1.06 kg | Pcs. Incl. the following mounting material: 02x Hexagon Bolts M10 x 30 mm 02x Nuts M10 04x Washers M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Qty. 1 Second-hand plate saw Mfc.: Mayer Model: PS3 E Built: 1989 – new electrical panel in 2010 Plate dimensions: Length: 3100 mm Thickness: 70 mm Saw Motor power: 11 kW, 2890 RPM Blade dia.: 350 mm Blade tension: Hydraulic Footprint: 5700 x 7500 mm –W x L Lubrication: Micro-spray ACCU-LUBE

Size: 3,000 mm x 1,200 mm -no attacks -without pressing cylinders

We offer you a used levelling plate here. Technical data for the compensating plate: Manufacturer: Meta The scope of delivery includes: 01x Compensating plate, used Material colour: sendz. galvanized Dimensions: 140 x 140 mm Material thickness: approx. 3.00 mm Drill hole Ø: approx. 11 mm Hole spacing (measurement center – center hole): approx. 90 mm Weight: 0.45 kg | Piece Your contact person in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Length: 600 mm Width: 300 mm

2pcs 3250 x 1885 x 400 mm

6 pcs 6400 x 1885 x 400 mm

We offer you a used levelling plate here. Technical data for the compensating plate: Manufacturer: Bito, Type PRO Suitable for the base plate L; which are mounted on the shelf stand P1-P3. The scope of delivery includes: 01x Compensating plate, used Material colour: sendz. galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 0.5 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.05 kg | Piece Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Plate bend Ingkant SM 52; cleaned and tested; Table equipment; suitable for Heidelberg SM 52 plates. Plate bender SM 52; good condition; cleaned and checked; table top model; used for Heidelberg SM 52 plates.

Offer 26038 The slab can be viewed at the 02943 Boxberg location by appointment. Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 350 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 9 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 3000 x D 2500 x H 870 mm - Weight approx. 8000 kg

Printing plate bending for Heidelberg SM 52 Beil PB-S 52; good condition; cleaned and tested; Stand-up device; suitable for printing plates Heidelberg SM 52. Plate bender for Heidelberg SM 52 Beil PB-S 52; good condition; clened and checked; used for Heidelberg SM 52 plates.

Printing plate development machine Koenings KTW 653; good condition, cleaned and tested; 3 brushes; inlet width 650mm; suitable for waterless panels. Plate processor Koenings KTW 653; good condition; cleaned and checked; 3 brushes; width 650mm; Used for waterless plates.

Grafoteam PST-36L Plate Stacker

Agfa Acento E, 16 Diodes, 116000 Plates

M. No.: 5301/04

6pcs of Skoda floor plates 6400x1885x400mm pirce 12000eur/pc 4pcs of Skoda floor plates 5600x1885x400mm price 10500eur/pc 2pcs of Skoda floor plates 3200x1885x400mm price 6000eur/pc

With extraction Auction-ID: A1-44302-1

Size: 830 x 660 mm

Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 630 mm -Width: 630 mm -Height: 130 mm -Plate thickness: 30 mm -with support ribs -Weight: 121 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 795 mm -Width: 600 mm -Height: 130 mm -Plate thickness: 20 mm -with: support ribs -Weight: 112 kg

Clamping plate, welding table, welding table, straightening plate -Mounting plate: steel , with a vice -Width: 1500 mm -Length: 2005 mm -Height: 845 mm -Plate thickness: 45 mm -Plate: is on steel frame -Vise: clamping jaws 110 x 15 mm -Transport dimensions: 1525/2230/H990 mm -Weight: 1250 kg

2pcs 3500 x 2000 x 350 mm

M. No.: 458/08 (C.2.144.1301/02) Max. Format: B1 Voltage : 100-240V // 300-330VA // 50/60Hz

Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 495 mm -Width: 398 mm -Height: 85 mm -Plate thickness: 20 mm -with support ribs -Weight: 37 kg

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer/inner diameter: 122/62 mm -Height: 20 mm -Hole circle: Ø 100/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 11x pillows available -Price: per piece -Minimum order: 3 pieces -Weight: 0.2 kg/piece

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 795 mm -Width: 600 mm -Height: 145 mm -Plate thickness: 30 mm -with: support ribs -Weight: 148 kg