Auction-ID: A7-43915-15

Quick Coupler Hydraulic coupler Auction-ID: A1-43658-7

Weight: 5 T Top speed: 30 km/h Engine: Caterpillar diesel Maximum digging depth: 3,280 mm Blade width: 1,980 mm Auxiliary lines: High and low speed Caterpillars: Rubber Quick coupler: GEITH Equipment: 3 buckets Auction-ID: A1-43658-83

Mini crawler excavator, model KV15, 360 degree fifth wheel rotation, seat edge control joystick, electronic controls, hammer hydraulics, various accessories, equipped with standard 400 mm bucket + 200 mm digging bucket + 800 mm bucket, never used 0 hours The color of the excavator may vary according to availability (yellow, red, other) NEVER USED Overall dimensions: 2500 x 1000 x 2500 mm Weight: 1200 kg Auction-ID: A7-43970-143

Weight 9.1 t Standard tyres 405/70-20 Boom/ Arm VA/SKA Outrigger stabilizers 2 2/4-fach Transport length 4.45 m Transport width 2.33 m Transport height 3.03 m Maximum horizontal reach 6.86 m Digging depth 4.05 m Tear-out force 31 kN Model series MSX engine manufacturer Cummins engine type 4BT3.3 motor power 60 kW Displacement 3.3 l Revolutions at maximum torque 1800 rpm Auction-ID: A1-40220-2

Trailer complete with excavator: Trailer with 4 tires for transporting excavators, total mass 1130 kg, leaf spring suspension, 4 tires 165/70/13, quick coupler hook, never used, not registered for road use, JPC ht 12 excavator, Koop engine with electronic ignition, 360 degree fifth wheel rotation, hydraulic attachment for hammer and accessories The color of the excavator may vary according to availability (yellow, red, other) Trailer: NOT REGISTERED, WITHOUT REGISTRATION DOCUMENT and NOT REGISTERED (no VIN number) Overall dimensions: 3300 x 1600 x 2700 mm Weight: 1200 kg MACHINERY WITHOUT CE MARKING, NOT COMPLIANT WITH EU DIRECTIVES, INTENDED EXCLUSIVELY FOR NON-EU MARKETS Auction-ID: A7-43971-20

Auction-ID: A1-43811-1737

Auction-ID: A1-43811-1566

• Hyundai R25Z-9A Mini Excavator • Year of construction 2014 • 3,289 operating hours • Operating weight 2.6 t • Quick coupler MS03 • 1x backhoe bucket • 1x Wide Spoon • Cabin with heater / heat exchanger • Overdrive • Work light on the arm • Radio • Chains in very good condition • Hardly any play in the bushings • Engine runs smoothly and cleanly • Hydraulics tight and powerful • Technically in very good condition • Well-maintained device • 8.5 KW Auction-ID: 04B-T5V-1

Mini crawler excavator model JPC HT25, equipped with 360 degree rotation fifth wheel, swing arm, control joystick, auxiliary system for hammer, electronic controls, 3-cylinder water-cooled engine, never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) NEVER USED Overall dimensions: 2900 x 1500 x 2500 mm Weight: 2400 kg Auction-ID: A7-43970-66

Auction-ID: A1-43811-1773

Machine is in good working order Work lighting Roll bar Swing boom Mechanical quick coupler 2nd travel speed 1 piece wide container Auction-ID: A1-41955-7

Auction-ID: A1-43811-1725

Equipped with: hydraulic quick change VW05, cleaning bucket 1000mm, slot bucket 220mm, with reversible ears, lifting hook, work lights, underlays to be widened, rotating beacon, offset boom, radio, total length 3,875 mm, total height (cab / awning) 2,360 mm, total width superstructure (cab / awning) 1,055 mm, ground clearance 205 mm, total length tracks 1,520 mm, total width tracks - tracks retracted 980 mm, total width tracks - tracks extended 1,300 mm. Auction-ID: A1-40128-36

Manufacturer: Volvo Construction Equipment Model: EC220EL Machine type: Crawler Excavator Construction year: 2017 Product Identification Number (PIN): VCEC220EC00321225 Operating hours (approx.): 11,434.9 h Engine power: 129 kW Emission standard: EU Stage IV (EL series) Undercarriage: Steel tracks Cab: Enclosed ROPS cab Boom/Stick: Mono boom Attachment: Hydraulic quick coupler with attachemt - NOT included Remarks: Used machine in normal working condition. Shows typical signs of use consistent with age and operating hours. Remarks: CE marked Own mass: approx. 25,100 kg Auction-ID: A7-43219-45

Mini crawler excavator, model JPC HT20, equipped with 3-cylinder liquid-cooled engine, joystick control, auxiliary system for hammer, variable undercarriage and swing arm, never used Overall dimensions: 2700 x 1200 x 2500 mm Weight: 1900 kg Auction-ID: A7-43971-368

Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, 360 degree continuous rotation fifth wheel, hitch and control for hammer, + 200mm universal auger attachments, hydraulic hammer, mowing blade, wood grapple, 200mm bucket + 800mm bucket. Never used 0 hours The color of the excavator may vary according to availability (yellow, red, other) NEVER USED Overall dimensions: 2500 x 1000 x 2400 mm Weight: 1200 kg Auction-ID: A7-43971-131

Auction-ID: A1-43811-1735

JPC HT 18 mini-excavator, equipped with twin-cylinder diesel engine, joystick and electric controls, equipped with extendable undercarriage, boom swing, hydraulic system for hammer, never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) Overall dimensions: 2700 x 1100 x 2600 mm Weight: 1650 kg Auction-ID: A7-43970-166

Interview: Complete oil changes OK Balance: 2.6 m Cameras: 2 Lubrication: Centralized Hydraulics: All lines Pads: 600 mm Width: 2.99 m Quick coupler: LIEBHERR SW48 Cleaning bucket: Tilt 2.20 m Backhoe buckets: 1.40 m & 600 mm Auction-ID: A1-43658-20

Auction-ID: A1-40128-25

Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, 360-degree continuous rotation fifth wheel, hitch and control for hammer. Never used 0 hours The color of the excavator may vary according to availability (yellow, red, other) Overall dimensions: 1200 x 3000 x 2500 mm Weight: 1100 kg Auction-ID: A7-43970-90

Equipped with: Yanmar SV15VT mini excavator 06-2021, with hydraulic quick coupler Miller GTS 0A,(ROPS), 846 hours, transport weight: 1,465 kg, operating weight: 1,595 kg, engine: Yanmar diesel, noise level: 81 dB(A) / 98 dB(A), adjustable track undercarriage, joystick steering, work light, length: approx. 3,500 mm, width: approx. 980 mm (extendable to approx. 1,170 mm, rubber tracks, number of bottom rollers: 3, hydraulic hoses guided in the boom, 4 attachment points on the undercarriage, levelling blade with short lifting arms (588 mm), 1 additional hydraulic line with pedal control, 2nd travel speed, LED work light on the boom side, blade cylinder guard, height: approx. 2,280 mm, cleaning bucket 900mm, tine bucket 460mm, off-set boom. Auction-ID: A1-40127-75

JPC HT18 mini excavator with KUBOTA 3-cylinder MOD D722 engine, liquid-cooled, equipped with extendable undercarriage, boom swing, zero tail swing rotation, control joystick, hammer attachment, digital controls, year 2024, never used - 0 hours Overall dimensions: 2500 x 1100 x 2500 mm Weight: 1700 kg Auction-ID: A7-43971-337

With stone clamp Auction-ID: A1-40128-154

Mini crawler excavator, model JPC HT20, equipped with 3-cylinder liquid-cooled engine, control joystick, auxiliary system for hammer, variable undercarriage and swing arm, never used Overall dimensions: 2700 x 1200 x 2500 mm Weight: 1900 kg Auction-ID: A7-43971-409

Mini crawler excavator model JPC HT25, equipped with 360 degree rotation fifth wheel, swing arm, control joystick, auxiliary system for hammer, electronic controls, 3-cylinder water-cooled engine, never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) NEVER USED Overall dimensions: 2900 x 1500 x 2500 mm Weight: 2400 kg Auction-ID: A7-43970-36

Very good machine works perfectly The bucket in the photos is sold with the machine Auction-ID: A3-40492-36898

2 year warranty (both for business and private buyers) given by the seller himself! so no anonymous import — seller is effectively available after sales for service and follow-up - Delivery possible at home and abroad; price to be discussed - Additional accessories and attachments available separately (e.g. additional buckets, auger, hammer, grapple,...) - Professional compact crawler excavator, production 11/2025, unused and fully operational. Its narrow construction (±70 cm) makes it ideal for gardening projects, renovations, urban construction sites and places with limited passage — can pass through standard gates and many interior doors. Perfect for landscapers, contractors, utilities and rental - Drive: tracks (rubber tracks); Operation: double joystick (mechanical); Hydraulics: double gear pump; CE approved; Side-swing arm (swivel function for working along walls); Front stabi ...

Komatsu PC 18 MR Mini Excavator Manufacturer: Komatsu Model: PC 18 MR Operating hours: approx. 2,963 h Year of Make: 2008 Facilities • Quick coupler MS01 • Two shovels • Adjustable suspension • Electronic immobilizer • Dozer blade • Enclosed cabin Service • Engine oil new • New engine oil filter • New air filter Condition / Notes • Used • Play available in the arm Margin taxation according to § 25a UStG – VAT is not shown. Auction-ID: 04C-D4E-1