excavator 60 m used for sale

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve adapter sleeve 2 pieces -Type: MK3/2 -Shipping/Price: complete -Dimensions: Ø 24 x 112 mm -Weight: 0.2 kg/piece

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, Char-Lynn hydraulic motor -Type: MAE 140 740-0140-140-007 -Shaft: Ø 31x 50 mm -Dimensions: 260/133/H130 mm -Weight: 13.9 kg

OKUNO MSC-15 spring coiling machine was manufactured in 1998 in Japan by OKUNO Machine Co. The machine designed for the efficient production of springs from wire with a maximum thickness of 0.3 mm, consists of a wire spool rack with a braking system, a heating device for annealing and a forming machine. The wire processing process begins with taking material from a spool mounted on the machine stand, which is then fed into the heating device to anneal both ends of the spool. The pre-treated material is then fed further into the forming machine, where it is shaped into a spring by automatic cutting and bending. The length of wire feed is regulated by a digital indicator located on the machine frame. Technical data of the OKUNO MSC-15 spring coiling machine - maximum wire feeding length: 10m ± 5 mm - thickness of material: 0.15 – 0.3 mm - material width: 5.0 – 15.0 mm - maxi ...

Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slab Miller Strip width: 30” – 762 mm Cutter Speed: 500 rpm Metal speed: 18 fpm (1.9 m/min.)) Capacity: min. ¼” max. 1-1/4” Thickness Entry thickness range: 13 – 20 mm

Used stainless steel ribbon mixer, volume 180 liters. Ready for operation.

Used packaging machine by Multivac type R 245. New 2010. Packaging machine: - produces vacuum and aerated packaging from deep-drawn and sealable bottom soft or thick film, combined with sealable top film. - has two packaging formats : 250g cube with pack size 145x92.25x approx. 40 mm 500÷600g cube with pack size 188.5x145x approx. 40 mm Power supply 400 V / 50 HZ 3/PE AC phases Rated power 15 kW Nominal current 39 A Max. precharge 50 A

Flame cutting system, torch, oxy-fuel cutting system, machine cutting torch -Manufacturer: Messer Griesheim, machine cutting torch -3 connections: gas/oxygen/cutting oxygen -Dimensions: 540/180/120 mm -Weight: 4.1 kg

Specifications: SEW Movigear Drive Motors/ Motor Quantity: 11 pieces available Manufacturer: SEW Eurodrive Condition: good (used) Power: 50Hz/

Type MX5116T+ V-380 Work table dimensions 1100x700 mm Sliding table 1085х250 mm Diameter of spindle 35 mm Spindle rotation speed 6000-8000-8000-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets Ø90, 200x80 mm Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 466 kg Price 3060 Eur (EXW Jonava, Lithuania)

Type CK-3000B Height of working table 800mm Working depth 80mm Working length 2500mm Motion controller Loran Max traveling speed 150m/min Max working speed 105m/min Control system TPR Spindle power 2x 2.2 kW Spindle speed 0-18000 rpm Transducer Jiale Air pressure 0.6-0.8 Mpa Motors power 750+750+400W Transport dimensions 4200x1700x1400mm Weight 900KG Price 6499 Eur (EXW Jonava, Lithuania)

Volume : 1200 ltr. Material : areas in contact with the product in stainless steel; --> mixer mounted on base frame.

Type MX5116T+ V-480 Work table dimensions 1100x700 mm Sliding table 1085x250 mm Diameter of spindle 35 mm Spindle rotation speed 6000-8000-8000-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets Ø90, 200x80 mm Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 469 kg Price 3190 Eur (EXW Jonava, Lithuania)

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holders: adapter intermediate sleeve reducing sleeve SK40 MK5 -Mounting: SK40 -Holder tool: MK5 -Dimensions: Ø 63 x 405 mm -Weight: 5.6 kg

Type MX5117B+V-380 Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 391 kg Price 2360 Eur (EXW Jonava, Lithuania)

Type MX5117B+V-480 Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 394 kg Price 2490 Eur (EXW Jonava, Lithuania)

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK5/4 -Dimensions: Ø 45/170 mm -Weight: 1.0 kg

MADO MEW 725 automatic grinder, including lifting device, two feeding worms, one working worm, cutting set Unger 5 pcs., including key for the removal of the working worm

RUHLE / RÜHLE MPR 150 Vacuum Cooling Tumbler / Mixer Tablet control (height adjustable) Automated lid opening and closing tiltable hopper Direct cooling system Stainless steel vacuum canal, cooled Quick arm fastening Scraper, pressure assembling variable speed from 0-50 RPM vacuum system from 0-90% 150 liters tumbler capacity

Machine vice, sturdy vice, drill press vice -Machine vice: with MK5 / M20 holder -Type: 36642.M11 -Clamping jaws 80 x 22 mm -Clamping depth: 40 mm -Dimensions: 215/175/H80 mm -Weight: 3.7 kg

RUHLE / RÜHLE MPR 220 Vacuum Cooling Tumbler / Mixer Tablet control (height adjustable) Automated lid opening and closing tiltable hopper Direct cooling system Stainless steel vacuum canal, cooled Quick arm fastening Scraper, pressure assembling variable speed from 0-50 RPM vacuum system from 0-90% 220 liters tumbler capacity

Horizontal cartoner, packaging machine -Conveyor belt: from packaging machine/cartoner -Speed: 1 m/min -Conveyor belt length: 1335 mm -Cardboard width: adjustable -Dimensions: 1670/1000/H530 mm -Weight: 100 kg

Maja Skinny II, skining and derinding machine, CE-conform execution, year 2019, power supply: 3 Ph, 400 V, 50 Hz, 2.0 A, 0.75 kW, cutting width 434 mm, with infeed conveyor, net weight approx. 190 kg, refurbished condition

Key data: 1050 mm, 560 mm, 560 mm

Machine Details Stock-No. 1105-03956 Type of machine Machining Center - Vertical Make MORI SEIKI Type MV 55 Year of manufacture 1991 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis ex site Price Technical details x-travel 1050 mm y-travel 550 mm Z-Travel 560 mm control FANUC O M table-size 1,400 x 550 mm max. table load 1500 kg turning speed range - milling 6000 rpm tool taper BT 50 Tool changer 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 12 kg power capacity - milling spindle 7,5 / 11 kW rapid traverse X-axis 15 m/min rapid traverse Y-axis 15 m/min rapid traverse Z-axis 12 m/min Feed 0.001 ~ 5.000 mm/min spindle bearing diameter 100 mm total power requirement 35 kW weight of the machine approx. 10 t dimensions of t ...

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK4 2 pieces -Type: MK4/4 / MK4/3 -Price/Delivery: complete -Transport dimensions: 265/85/H60 mm -Weight: 2.3 kg

serial no.: 1800 Dimensions (L/W/H): 70x70x120 cm Wire-O-System (closer only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Servo motor, electric motor, DC motor, stepper motor, stepper motor Manufacturer: Nucleus, servomotor -Type: NUDrive MP85 10A Bgr2 R Rev2 -Item No.: DS851026 -Shaft: Ø 14 x 37 mm -Number: 11 servo motors available -Price: per piece -Dimensions: 200/85/H85 mm -Weight: 4.1 kg/pc.

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Nucleus, servomotor -Type: NUDrive MP57 2A IP64 -Item No.: DS421107 -Shaft: Ø 10 x 30 mm -Number: 2 servo motors available -Price: per piece -Dimensions: 155/56/H70 mm -Weight: 1.3 kg/pc.

2000 Folding machine width 76 cm 4 buckles 2 knives 1 side buckle 1 glue station stream delivery ASP66-2ME In production Available: 02/2024 Located: Germany

Stephan MCH10/2 Microcut, continuous cutter, colloid mill, coial mill, ultrafine shredder Machine in neat condition Voltage: 400V Power: 4000/4500W Speed: 1415/2920rpm neat and smooth running Machine must be thoroughly cleaned before use Cutting gap: 1.3mm The machine was operated "inline" by the previous owner, so there is no circulation device, but this can be easily built with DN50 milk thread screws. Video about test run available

Automatic Thread Processing Machine Multitapper 1212 CoastOne - Made in Finland Exhibition machine Machining area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2x tapping forming; 1x Sinking Drilling Station Micro-lubrication for each spindle / tool station Control: TC15 touch screen Numerical Input, Import of Punches - NC Files

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Traversing centering tip: MK5 mount, 2 pieces -Type: 1x without type designation / 1x IAMU-BLAJ-CM5-STAS-7628-74 -Price/Fee: complete -Transport dimensions: 267/180/H90 mm -Total weight: 7.6 kg

Product number: 2852 Type: BFCM 12.07 Serial number: BFO 14.022.02 Year of construction: 2014 Detector: Profile LS Detector size: 350 x 125 mm Passage: 270 x 85 mm Belt width: 305 mm Belt speed: 44 m/min. Infeed height: 2400 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 1.1kW Dimensions: 2500 x 1400 x 2400 mm Weight: 360 kg With pneumatic reject through reverse direction of transport belt Machine never used, in new condition

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Lenze ABW, live centering tip -Type: ZN 204 -Recording: MK4 -Dimensions: Ø 69 x 210 mm -Weight: 2.1 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve, 2 pieces -Type: MK3/4 adapter -Price/Fee: complete -Transport dimensions: 245/100/H50 mm -Total weight: 3 kg

Threading chuck, tap chuck, tapping chuck, drill chuck, collet chuck, quick-release drill chuck -Manufacturer: FRONTAL ABW, Quick-release drill chuck, MK3 mount -Type: 5-20 mm -Dimensions: Ø 75 x 257 mm -Weight: 2.9 kg

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ 2-304 -Length: 8.5 m -Connector: 5-pin -Transport dimensions: 580/450/H130 mm -Weight: 7.1 kg

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 590/500/H150 mm -Weight: 8.3 kg

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 600/500/H130 mm -Weight: 6 kg

x-travel: 900 mm y-travel: 630 mm z-travel: 500 mm table-size: 1200 x 600 mm spindle taper ISO: 40 turning speed range: 20 - 6300 U/min feeds longditudinal/cross/vertical: 2 - 4000 mm/min rapid motion -longitudinal/cross/vertical: 10/10/8 m/min numbers of positions in the tool changer: 22 quill stroke: 100 mm total power requirement: 20 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: 4 x 3 x 2,4 m electronic hand wheel: cooling equipment: Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. in condition from seller! 33.01 392 with CEE plug and cable 3-D trace control Heidenhain TNC 425 22 fold toll changer colour graphics vertical head with hydraulic tool clamping fix table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7182 Type: Crysta Plus M544 Producer: Mitutoyo Created: 2012 Parameters: Table dimensions: 860 x 638 mm Axis X: 505 mm Axis Y: 405 mm Z axis: 405 mm Max. workpiece weight: 180 kg Machine dimensions: 2185 x 1082 x 1078 mm Machine weight: 440 kg

Measuring amplifier, power supply module, measuring amplifier point design -Manufacturer: Keyence, Measuring amplifier point version -Type: SJ-M300 -Dimensions: 130/50/H75 mm -Weight: 0.2 kg

Weight: N/a Power: 1,1 Kw Waterpressure: 0,5 Bar Length mm: 550 Width mm: 500 Height mm: 2100 Working height: 1000 Rack: 1500x 700x 900 Transport size L x W x H: 2,5 x 0,55 x 2,1 Control type: Manual Electric. Connection: 16A 400V Documentation: No Instructions: No Electric diagram: No Photos/film available: Photos and video available For more information, please mail us: salestecfort.nl

Motor protection relays, relays, heating current monitoring, preheating for generators, contactors, semiconductor contactors, contactors, motor protection -Manufacturer: Klöckner Moeller, motor protection relay -Type: Z 00-16 -Quantity: 1 available -Dimensions: 120/45/H100 mm -Weight: 0.5 kg

Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, Valve manifold type MPAL-VI 569926 -Solenoid valves: Type 573718 / 533342 5 pieces -Individual components: see photos -Price/Fee: complete -Dimensions: 150/140/H70 mm -Weight: 0.9 kg

Measuring amplifier, power supply module, point-type measuring amplifier, ionizer, static eliminator, static eliminator -Manufacturer: Keyence, Static Eliminator Stabilizer -Type: SJ-M300 -Dimensions: 130/70/H35 mm -Weight: 0.1 kg

Flat Pile Feeder, 1st Plant 4 Bags, 2nd Unit CAS 38/2# 96952157 (2 Bags), Shed Delivery, Compressor

Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100S Servo inverter module -Type: 80VD1 00PS.C02X-01 -Dimensions: 200/65/H105 mm -Weight: 0.9 kg.

Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100D Servo inverter module -Type: 80VD1 00PD.C022-01 -Dimensions: 200/65/H105 mm -Weight: 0.9 kg.

- Pallet feeder FP110 - MBO Navigator Control - 1. Station 4 buckles - 2. Station 960/6 buckles - 3. Station (Herzog Heymann) 52/4 buckles - Mobil Cross Fold Z2 - Mobile delivery S BAP 82 ME - Mobile delivery ASP 66-2ME

Specifications Ø tubes / radius in mm: Ø 22 / 67 Ø tubes / radius in mm: Ø 10 / 36