excavator 60 m used for sale

Manufacturer: Ficep Model: 601 DE Excalibur Year of Manufacture: 2010 Condition: Used Technical Description - Horizontal drilling head with one spindle - Spindle motor power: 7.5 kW - Clamping device included - Number of spindles: 1 - Drilling diameter: 5 - 40 mm - Air pressure: 0.60 MPa - Power consumption: 13 kW/h - Workpiece length: 12,000 mm - Minimum workpiece size: 100 x 50 x 50 mm - Maximum workpiece size: 12,000 x 610 x 610 mm - Bed travel speed: 35 m/min - Spindle speed: 180 – 1500 rpm - Machine weight: 2000 t Find more here - / Contact us at -

A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible.

Manufacturer: Ficep Model: 601 DEE Excalibur Year of Manufacture: 2015 Air Pressure: 0.60 MPa Power Consumption: 13 kWh Length of Workpiece: 12,000 mm Minimum Workpiece Size: 100 × 50 × 50 mm Maximum Workpiece Size: 12,000 × 610 × 610 mm Maximum Punching Hole: 40.00 mm Bed Travel Speed: 35 m/min Spindle Speed: 1500 rpm (180–1500) Machine Weight: 2000 t Find more here - / Contact us at -

WAGNER WMC 600 L CNC machining center was built in 2021 in Germany by Maschinen Wagner Werkzeugmaschinen GmbH. The machine is used for precision machining of workpieces with a maximum weight of 300 kg. All machining processes are performed by means of many state-of-the-art components, which guarantee the achievement of workpieces with high repeatability and excellent precision. These include, among others, a reliable high-speed spindle, a robust work table and a SIEMENS CNC control with all the necessary functions. The WMC 600L CNC vertical machining center weighs 3500 kg. Technical specifications of the WAGNER WMC 600 L CNC milling machine - feed in the X/Y/Z axis: 600/400/450 mm - rapid traverse in the X/Y/Z axis: 24/24/20 m/min - work table dimensions (L x W): 800 x 400 mm - maximum workpiece weight: 300 kg - maximum spindle rotational speed: 8000 rpm - minimum spindle rotati ...

G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with a 10 mm pitch, axis speed 0.01 mm/min - 15 m/min, positioning via linear scale, resolution 0.001 mm, V-flat slide guide, guideways are Turcite-B coated. Disc feed support driven by a digital servo axis, ball screw with a 5 mm pitch, axis speed 0.01 mm/min - 10 m/min, positioning via linear scale, resolution 0.0005 mm, V-flat slide guide, guideways are Turcite-B coated. Workpiece headstock with digital servo spindle, positionable with initiator for detecting the reference mark, adjustable 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm. Center height  ...

G+H precision finishing machine FI 600 for machining multiple diameters in one setup., Feed table driven by digital servo axis, ball screw with 5 mm pitch, axis speed 0.01 mm/min – 15 m/min, positioning via internal encoder, resolution 0.001 mm, mechanical cylindricity adjustment +10° - 4°, V-flat slide guide, guideways are Turcite-B coated., Z-table movable for positioning a sword finisher, The Nagel finishing head is provided by the customer. Workhead with digital servo spindle, positionable with an initiator for detecting the reference mark, adjustable from 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm, center height 140 mm., Full-room machine enclosure, approximately 2.3 m high, open on the sides, with integrated loader. Front sliding door electrica ...

Offer 25282 Specifications: - Saw blade diameter 600 mm - Cutting area at 90° - 190 x 190 mm - 100 x 310 mm - mitred at 45° - 170 x 170 mm - 100 x 220 mm - Saw blade speed 2800 rpm - Drive approx. 4.5 kW - Space requirement approx. W 1470 x H 1800 x D 1550 mm - Weight approx. 450 kg - Digital degree positioning display - Pneumatic device with pneumatic clamping cylinder -Saw blade - Discharge roller conveyor with dimension stop + digital display 5000 mm

An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible.

Height=3.25 m, Overall length= 1.68 m, Overall width= 3.7 m, Net weight= 2400 kg,

EDM machine Agie Charmilles Cut e 600 BJ 2018

Image sensor 1", 6.6 megapixels, CMOS Dual telecentric lens Z-axis travel 30 mm Z-stage stage maximum load 3 kg

Reference Num.: 4199 Brand: Horizon Type: Collator AC-6000 Available: directly Status: Not in production Location: Deutschland

Web width: 520mm Voltage: 400V+IV+PE Current: 20A Control voltage: 24 V DC Air pressure: 6 bar

SATRIND MULTIPURPOSE DUAL SHAFT SHREDDER, Including abt 1,5 Ton hopper, 1.000 x 600 mm crushing chamber, Shafts width 1.000 mt., n.30 knives, 3 hooks, 1 mt.height Supporting structure, 11,00 Kw power (15 Hp) 380 V, Possible addition of pressing unit for round or voluminous scraps., Including extraction belt, Good working conditions, installed power - used power in work: about 60-65% : 11 kW, working width: 1000, options available: pressing unit, conditions: good, type: dual shaft, multipurpose

Trimos TVM 602

Trimos V 604 +

Brown & Sharp 600 x 400 mm

TECHNICAL SPECIFICATIONS Manufacturer: GfA Description: Circular swing screening machine Type: 2PP 6000/2000 Year of Make: 1991 Screen length: 6,000 mm Screen width: 2,000 mm Number of screen decks: 2 pcs. Drive power: 22 kW SPECIFIC COMMENT - Incl. drive, springs - Incl. material chute and outlet tray

URBAN AMS 6010 very good condition fully operational

B&A REF:  9213 TON: 60 SCREW DIAMETER:  25MM SHOT WEIGHT: 45 STROKE VOLUME:  49CM3 INJECTION PRESSURE:  2240AR PLATEN SIZES:  446 x 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT:  200MM MOULD OPENING STROKE:  350MM MAX DAYLIGHT:  550MM EJECTOR STROKE:  125MM CONTROLS: SELOGICA CORE PULLING: 1 MOTOR: 15 HEATING CAPACITY: 8.9KW SCREW DRIVE:   HYDRAULIC

Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning gt; vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... gt; machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position to ...

Edge banding machine Type: Tempora F 600 Manufacturer: Format-4 Year: 2021 Glued meters: 9000 In very good condition, under power Find more here - / Contact us at -

gemotoriseerde X as Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 600 mm Max travel Z-axe: 600 mm Max height workpiece: 600 mm Power on spindle: 3 kW Table size: 900 x 250 mm

A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible.

rand: Dr.Boy Model: 60E Year of construction: 2023 Working hours: 50 Screw diameter: 32 mm Injection pressure max.: 2.142 bar Shotvolume max.: 100,5 cm3 Clamping force: 60 T Max. distance between holms: 360 x 335 mm Min. mould height: 250 mm Distance between plates max. 650 mm Measurements: 3.450 x 1.150 x 1.950 mm Weight: 2.250 kg Options: • Procan ALPHA 4 display • Hydraulic core pull (2x) • Air valve (2x) • Interface package (incl. RS232/485, OPC-UA + Licence fee) • 4 Free programmable AIO’s • Robot interface Euromap 67 • Interface between safety fence and machine Euromap 78 • Colouring contact interface • Quick change mould package – Cooling circuits (3x) on fixed & moving platen – Water distributor 8-fold – Ejector with quick coupling – Open nozzle with thread tip • Energy distribution box 6-fold (feeding via second cable)  ...

- Gearbox with oil circulation lubrication - Blank counter holder (optional) - Processing unit KA - behind the machine (optional) - Specifications: Blank diameter (max.): 1,200 mm Tip width : 900 mm Tool holder DIN 55027: Gr. 11 Axis force (transverse) (max.): 20 kN Axis force (longitudinal) (max.): 30 kN Stroke (transverse): 360 mm Stroke (longitudinal): 750 mm Cross speed: (max.) 3.0 m/min Longitudinal speed: (max.) 2.0 m/min Stroke ejector: 400 mm Tailstock stroke: 750 mm Speeds (9 levels): 42-660 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 6,000 kg

A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Height=1.93 m, Overall length= 1.1 m, Overall width= 0.8 m, Net weight= 147 kg,

Type: HSB-600 Serial number: 118 Year of construction: 2011 Belt width: 630 Power: 3 x 400V, 50Hz, 16A Dimensions: 4400 x 1750 x 2250 mm Weight: 1600 kg

KELLENBERGER 600U Universal Grinder Machine No. 721/441 Distance between centres 600 mm Centre height 125 mm Table orientation 11 degrees Grinding wheel for cylindrical grinding 400 x 50 x 127 mm Motor power 3 kW Spindle speed 1500 / 1700 / 2200 rpm Orientation of grinding wheel holder headstock 270degrees (3 x 90) Grinding wheel speeds 3600 rpm Boring for internal spindle 70 mm Workhead swivel 360 degrees Workhead speeds 20 - 400 rpm Wheelhead motor power : 3 kW Workhead head motor power : 0,9 kW Dimensions 2580 x 1680 x 1670 mm Weight 2200 kg

Inv. Num. : 6800 Type: 6020 Producer: RT Created: 2016 Parameters: Work table length: 6000 mm Work table width: 2000 mm Machine weight: 8000 kg Equipment: 3D Head TECHNI Possibility of 3D cutting

The Flexa 607 automatic edge banding machine is an extremely versatile machine with a high performance that puts it at the top of its category. Productivity: The high machining speed of up to 22 m/min ensures high productivity in all working conditions. The XE version with controlled axes enables extremely fast and precise machine setup. Flexibility: The optional equipment of the machine with a belt press allows the processing of any type of material. FLEXA 607 / 607 XE Panel height 10 (13) ÷ 60

Key data: 480 mm, 2000 mm, 3050 1/min

Stock number: 4009 CNC LATHE Manufacturer: Gildemeister , Type: CTX 600 Machines NO.: 361238, Year of manufacture: 1997 Specifications: Max. circumferential diameter 480 mm dia. Max. turn. About Bed 650 mm Dia. Turning length 2000 mm Main motor power 27 kw Main spindle speed range 4-3050 rpm Tool turret with 12 stations Powered stations revolver 1 6 pieces. Control Gildemaister EPL Fabr. Accessories: Hydr. Chuck main spindle 400 mm dia Tool holder vdi 50 Driving angle tools 2 pieces Driving Tools Straight 2 pcs. Various tool holders. 15 Chip conveyance. Cooling water system. Length: 4000 mm, Height: 2100 mm, Width: 2500 mm, Weight: 9100 kg

Injection Molding Machine FCS SD 6000 BJ 2016

centre height: 250 mm centre distance: 600 mm Dimensions (L/W/H): 3600 x 1900 x 2100 mm weight of the machine ca.: 2,25 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26037 Technical data approx.: - Plate length approx. 6000 mm - Plate width approx. 1800 mm - Top height without base approx. 360 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 6 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 6000 x D 1850 x H 870 mm - Weight approx. 11000 kg

The Ilpra FS 6000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Make: Ilpra , Model: FS 6000, Capacity: 4800, Year of Manufacture: 2003, Filling Volume: 50-500 ml per cup , Cup Dispenser: Automatic twin dispenser , Filling: Twin Filling Heads , Filling Specs: Fruits up to 1 cm pieces , Sealing: Twin Heat Sealing Station , ...

Technical data: Circumferential diameter: 680 mm Center width: 1000 mm Speed: 2800 1/min Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-speed revolver VDM 40 - C-axis

Height=1.49 m, Overall length= 1 m, Overall width= 2.27 m, Net weight= 573 kg,

This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2017, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine.

This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information.

This horizontal turning machine was manufactured in 2009. A Weiler E 60x1000, it features a spindle bore of 83mm and a swing diameter over bed of 640mm. With a maximum torque of 1400Nm and a speed range up to 2500 rpm, its ideal for robust turning operations. Recently overhauled, it includes renewed bearings and guideways, ensuring high precision. Consider the opportunity to buy this Weiler E 60x1000 horizontal turning machine. Contact us for more information about this machine.

This Bridgeport GX 600 Vertical Machining Center was built in 2007 in the United Kingdom. Equipped with a SIEMENS SINUMERIK Control unit, this machine can operate with a spindle speed up to 8000 rpm.

This 3-axis CMS tecnocut JP 60hp was manufactured in 2008. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Consider the opportunity to buy this CMS tecnocut JP 60hp waterjet cutting machine. Contact us for more information.

This 3-axis OPS INGERSOLL OPS 600 was manufactured in 2001. It features a work spindle speed range of 5000-40000 and a tool magazine with 12 positions. The machine includes an extraction system for oil mist or dust and a Teka filter system. Ideal for high precision milling, consider the opportunity to buy this OPS INGERSOLL OPS 600 vertical machining centre. Contact us for more information about this machine.

This 4-axis OKUMA SPACE CENTER MA-600HB horizontal machining center was manufactured in 2007. It boasts a robust 160-tool ATC warehouse, continuous 4th axis table, and high-pressure cooling system at 30 BAR. With X/Y/Z strokes of 1000/800/810 mm and a maximum spindle speed of 6000 RPM, this machine ensures precision and flexibility for various machining tasks. The OKUMA MA-600HB machine we have for sale is designed for heavy-duty machining, accommodating pieces up to 1500 kg. For further details, please contact us.

This 3-axis OPS INGERSOLL 600 vertical machining center was manufactured in 2000. It features a travel range of 635 x 365 x 345 mm, a maximum table load of 1000 kg, and a high-speed spindle ranging from 5000 to 40000 rpm. The machine includes a tool magazine with 12 slots and an Andronic 2000 control system. Consider the opportunity to buy this OPS INGERSOLL 600 vertical machining center. Contact us for more information about this machine.

This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, its ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine.

This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information.

grinding diameter: mm grinding length: mm feed in: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.