excavator 60 m used for sale

Description: 2.9m dipper High and low flow lines 700mm offset skid 3m wide GROENEVELD automatic greasing system End of beam As is (scales will be reassembled for sale) Approx. Onsite Dimension. (l x w x h): 9,490 x 2,990 x 3,005 mm, weight approx.: 22,100 kg

Description: Narrow chassis 700mm offset skid 3m wide High and low flow lines 3m dipperstick GROENEVELD centralised lubrication End of dipper (No attachment, no buckets) Overhauled machine MAX. OPERATING MASS: 27 300 KG ENGINE POWER: 140kW Approx. Onsite Dimension. (l x w x h): 9,880 x 2,990 x 3,340 mm, weight approx.: 25,700 kg

Description: 2.9m dipper High and low flow lines 600mm offset skid 3m wide GROENEVELD automatic greasing system ENGCON S70 hydraulic attachment 3 fixed buckets (2m, 1.5m, 600mm) Overhauled machine OPERATING MAS: 27000KG ENGINE POWER: 145 Kw Approx. Onsite Dimension. (l x w x h): 10,290 x 3,000 x 3,255 mm, weight approx.: 27,000 kg

Description: 2.9m dipper High and low flow lines 700mm offset skid 3m wide GROENEVELD automatic greasing system End of dipper (No attachment, no buckets) Overhauled machine OPERATING MASS: 22400 KG ENGINE POWER: 124,3 Approx. Onsite Dimension. (l x w x h): 9,490 x 2,990 x 3,005 mm, weight approx.: 22,100 kg

Description: High and low flow lines 3m dipperstick GROENEVELD centralised lubrication S80 ENGCON hydraulic attachment 1 bucket (1600mm) Overhauled machine Approx. Onsite Dimension. (l x w x h): 10,080 x 3,180 x 3,675 mm, weight approx.: 36,200 kg

Baujahr 2018Kubota KX080-4a aus 2018 mit 6483,5 Stunden mit englischen Schnellwechsler wird verkauft wie auf den Bildern zu sehen ist ohne Schaufeln. Betankungspumpe vorhanden!Fast nicht ausgeschlagen, nur beim Hauptzylinder unten die Buchse und eventuell der Bolzen.Klimaanlage vorhanden und funktionstüchtig sowie die Heizung.Hydrauliköl mit Filter wurde gewechselt bei knapp 6000 Std sowie der Luftfilter bei 6266 Stunden wie auf den Bildern zu erkennen ist. Bagger läuft ansonsten wie auf dem Video zu sehen ist.Eigengewicht8.19 tTransportlänge6.45 mTransportbreite2.2 mTransporthöhe2.54 mTieflöffel-Inhalt0.25 m³Kettenbreite450 mmAuslegerMBReichweite7.33 mGrabtiefe4.6 mAusbrechkraft65.2 kNTieflöffelbreite0.8 mSerienKXMotorherst.KubotaMotortypeV3307CR-TE4Motorleistung46.5 kWHubraum3.331 lDrehzahl bei max. Drehmoment2000 rpmZylinderanzahl4Zylinder Bohrung x Hub94x120 mmGerne anfragen  ...

NOTE: The attached pictures of this position are for documentation purposes only, the real pictures of the position will be created and attached in a timely manner

Description: Kit consisting of 2 buckets for excavators, 200 mm digging bucket + 800 mm leveling bucket, attachment for all JPC excavators from mod ht12 up to mod ht25 Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 20 kg

Description: Kit consisting of 2 buckets for excavators, 200 mm digging bucket + 800 mm leveling bucket, attachment for all JPC excavators from mod ht12 up to mod ht25 Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 20 kg

Description: Kit consisting of 2 buckets for excavators, 200 mm digging bucket + 800 mm leveling bucket, attachment for all JPC excavators from mod ht12 up to mod ht25 Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 20 kg

Description: Kit consisting of 2 buckets for excavators, 200 mm digging bucket + 800 mm leveling bucket, attachment for all JPC excavators from mod ht12 up to mod ht25 Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 20 kg

Main Rack

BARCO FLOPamp;KBRD INTF MNC95

Electric motor, electric motor SIEMENS three-phase motor, power motor type 3LE16012BB233GB4 Type V1 Size 225M Motor speed 1475 rpm. Power consumption 84 Ampere Motor power 45 kW Mains connection 400 Volt, 50 Hz. Shaft diameter 60 mm Shaft spigot length 140 mm Wedge groove width in the shaft 18 mm Flange diameter 450 mm Centering diameter 350 mm Pitch circle 400 mm- Flange motor with 8 mounting holes 18 mm Overall length Motor housing without motor shaft 715 mm Overall length Motor housing with motor shaft 855 mm Space requirement L x W x H 855 x 450 x 570 mm Net weight: 320 kg very good condition - New, unused from stock dissolution; used

Electric motor, electric motor LAMMERS three-phase motor, power motor type 1TZ95012AA434AB4-Z Type B3 Size 200L Motor speed 2960 rpm. Power consumption 54 Ampere Motor power 30 kW Mains connection 400 Volt, 50 Hz. Shaft diameter 55 mm Shaft spigot length 110 mm Wedge groove width in the shaft 16 mm- foot motor with 4 mounting holes 19 mm, hole spacing 315 x 300 mm Overall length Motor housing without motor shaft 620 mm Overall length Motor housing with motor shaft 730 mm Space requirement L x W x H 730 x 400 x 520 mm Net weight: 205 kg very good condition - New, unused from stock dissolution; used

Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used

Sigmatek DDI166 DIAS Digital Bus Module Module Module Carrier Original packaging, unused, as good as new. Hardware versions 1.0 and 1.3 available. Price per piece. Invoice with VAT We may be able to assist you if you have any uncertainties about the software (e.g. if the software monitors the serial number). Feel free to call us.

Module carrier, CPU socket New, in original packaging. Hardware version 1.0

Drive motor, DC servo motor LENZE type GFQUBT 112-22 Spindle motor, electric motor Series No. 0239398K Year of manufacture: 1993 Nominal power: 6 kW Operating voltage: 400 DC Nominal current: 18 amps Maximum speed: 1000 rpm. Excitation voltage: 210 VDC Excitation current: 3.4 amps Shaft diameter: 38 mm (shaft with 10 mm key)Shaft length: approx. 76 mm (shaft protrusion from centering edge) Centering flange diameter: 230 mm Bolt circle diameter: 264 mm, 4x 14 mm holes Longlife-speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Speed max. 9000 rpm External fan LENZE type GSD 160 Mains connection: 400 V, 50 Hz. 0.32 kW Overall length : 830 mm (without shaft and centering flange) Overall dimensions L x W x H: 920 x 300 x 460 mm Weight: 130 kg good condition; used

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

BARCO HULPFUNCTIE 16 DIG OUTP

Rühle Tumbler MKR 600, with vacuum, scraping arm, container size 600 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device, comfortable emptying of the goods by standard carriage size, refurbished. The machine is currently in the overhaul and can be tested in Koblenz, Germany.

Working width: 600 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Aggregates: 2 brushing units separately adjustable; 1. Brush: Metal brush diameter 220mm; 2. Brush : Tynex brush, grit 80, diameter 220mm; Clockwise - counterclockwise: both brushes can be adjusted separately; Height adjustment: electric; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 4 kW ; Engine power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1200mm; Weight: 650kg;

Cutting mill / pipe cutting mill Special mill for shredding pipes Feeding via feeding shaft (rope pull system) Manufacturer: NEUE HERBOLD, D-74889 SINSHEIM Rotor diameter: 800 mm Working width: 600 mm Drive: 110 kW

The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...

Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...

-Model Colatrice REL 600 -with digital foil keyboard -380 volts -50 Hz -Year of construction 2001

Working width: 600 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 4 ; 1. Saw Cutting Unit Random System: Saw Cut Optics; 2. Brush : metal, diameter 220mm; 3. Brush: Tynex grit 60, diameter 220mm; 4. Brush: Tynex grit 120, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Engine power sawn rough: 1.1 kW; Motor power brushes: 4 kW; Engine power feed: 0.37 kW; Machine length: 2800mm; Machine width: 1500mm; Machine height: 1600mm; Weight: 1500kg;

Working width: 600 mm; Working height: 280 mm; minimum workpiece length: 250 mm; Aggregates: 2 brushing units centrally adjustable and each with individual fine adjustment; 1. Brush: Metal brush diameter 220mm; 2. Brush : Tynex brush, grit 80, diameter 220mm; Height adjustment: electric; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 4 kW; Engine power feed: 0.37 kW; Machine length: 1.5m; Machine width: 1.5m; Weight: 700kg; On this machine, the brushes can be swivelled diagonally to the feed direction, this breaks the edges, similar to oscillating brushes.

- Capacity 2,000 litres - Motor power: mixing screw:3.0 kW,swivel arm:0.55 kW - Usable volume approx. 1,600 litres (depending on product characteristics) - Container and lid parts are made of stainless steel 1.4301 (V2A) - Swivel arm and transmission parts are made of normal steel - 1st side outlet is made of stainless steel 1.4301 (V2A) - All lubricants are H1 and halal approved and certified

- Capacity 10,000 litres - Stainless steel container V2A - Gearbox new product - Swivel arm made of standard steel New product - Container made of stainless steel V2A new product - Mixing screw stainless steel V2A new product - Pneumatically driven new product - Drive motors 11 kW & 1.0 kW new product

Capacity: 8,000 litres water filling Volume: approx. 7,000 litres Bulk density: max. 0, 6 kg / litre Maximum filling: 4200 kg •Bowl, cover, swivel arm, mixing screw, spout housing made of V2A Traverse from mild steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified ATEX Zone 21 Consideration and introduction of the ATEX zoning 21 within the mixer. -Infrarot sensor Temperature monitoring tips storage with PT 100 Dampers manhole Explosion protection document Monitoring unit with temperature display

Rühle Tumbler MKR 150, with vacuum, mixing- and scraping arm, container size 150 liters, adjustable Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 50 rounds per minute, all stainless steel, comfortable emptying of the goods by standard carriage size. You are very welcome to test the machine in our facility in Koblenz, Germany.

Rühle Miknetum MGR 1500, newest generation of Tumbler, year of construction 2008, with vacuum, mixing arm, container size 1500 liters, filling size 900 Liters, intelligent Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, feed spindle as loading device, comfortable emptying of the goods by standard carriage size. You are very welcome to see the machine at our facility in 56070 Koblenz, Germany.

Ruhle Miknetum MGR 900, newest generation of Tumbler, with vacuum, mixing arm, container size 900 liters, filling size 675 Liters, intelligent touch-PC control, direct cooling by strong cooling unit, mixing and kneading , up to 25 rounds per minute, all stainless steel, loading device, comfortable emptying of the goods by standard carriage size You are very welcome to test the machine in our facility in Koblenz, Germany.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

Ruhle MKR 220 high tech tumbler with cooling and vacuum.

Rühle Tumbler MKR 300, Ruehle Hightech Tumbler with vacuum, incl. mixing and tumbling arm, container size 300 liters, Touch-PC control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device. You are very welcome to inspect the machine at our facility in Koblenz, Germany. If you have any questions, please do not hesitate to contact us.

Blender Talsa MIX95P; 400 V, new, Bowl capacity 95 litres, engine completely in stainless steel, separate stirrer and Bowl drive, 1 speed, forward and return, Bowl tilt, Dimensions Lxwxh approx. 108x80x120cm, weight 170kg New machine, built in 2018

Stock # U2267-2 Second hand stainless steel contact parts (316Ti) sand mill by Drais (Germany) model Perl-mill PMC 12.5 TEX. Machine has total volume of milling chamber 17.2 l and working volume about 12 l. Mill has rotor with plastic rings and works with rotation speed up to 1450 rpm. Machine is driven via belt gearbox by electric motor 13.5 kW, 1500 rpm, 400 V, 50 hz, Eex eIIT3 design. Mill is equipped with feeding pump, filter and electric cabinet. Includes technical documentation. Machine new 2002.

with mixing and Meng arm cooling vacuum

REF-1902 TEC-MAQ VACUUM MEAT KNEADER-MIXER Meat kneader with vacuum system and T-shaped mixing paddles. Manufacturer: TEC-MAQ. Model: ALFA-150. Serial no. 1125/OC. Year: 1996. 380V. 5,7A. 2.25kW. Capacity: 150 litres. Meat capacity: 80-100kg. Equipped with mechanical variable speed drive. Inner dimensions: length 600mm, width 480mm, height 600mm. Outer dimensions: height 1,600mm, width 700mm, length 1,250mm.

New machine - Contents: 1,000 litres when water is filled - Usable volume: approx. 800 litres depending on product characteristics - Maximum filling weight 1,000 kg - The mixer has a central bottom outlet - Containers, lids, swivel arm, mixing screw, V2A outlet housing

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Slip belt Magnetic conveyor, magnetic slip conveyor DGS System GmbH Z-conveyor, sliding belt system, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com.- No.: 44489-10 Year of construction 2017 Slide width 300 mm Distance of permanent magnets 250 mm Insertion length approx. 3400 mm (up to construction box)Insertion length approx. 3900 mm (without mounting box) Insertion height 210 mm Slide-in width housing 370 mm Insertion width Thread holders for adjustable feet 410 mm Insertion width on the mounting box 470 mm Conveying height - ejection height approx. 1040 mm Conveying speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 volts, 50 Hz circulation chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg very good condition; used