ex cell o used for sale

General SKU390X1026 MakeTenez / Schmidt LocationBarneveld CEcheck TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface16.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 (316L) Plate heat exchangerscheck Heating surface16,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm Connectionscheck DN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h Information No.12V002704 Year of construction2012 Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Ne ...

General SKU390X1027 MakeTenez / Schmidt LocationBarneveld TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface16.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4404 Plate heat exchangerscheck Heating surface16,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm Connectionscheck DN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h Information No.10V000139 Year of construction2010 Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgPlate heat exchangersApi SchmidtHeat exchangers > Plate heat exchangersBrand > Api Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

Number of working hours: 11925 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Höcker Polytechnik extraction system Year of manufacture: 8/2000 CE 3 chip collection barrels Fan Type SV 25/220 Motor 5.5 kW Volume flow 3890 m³/h Pressure increase 2500 Pa Motor vibration 0.18 kW Rotary valve 0.37 kW PLC control Emergency stop shutdown Level monitor very good condition because little used

Working width: 2350mm, min. slitting knife spacing: 110mm, slot width: 5mm, slot depth range: 0mm-400mm, binding edge area: 45mm, max. material weight: 2000g/m². Documentation available. An on-site inspection is possible.

Extrudeuse CM EVOLUTION PLAST type CM-EVO 230 Année. : 2019 Puissance : 50 KW Tension : 400 VOLTS Poids : 4000 KG

Souffleuse MECCANOPLASTICA type MP1 - D En très bon état de fonctionnement Année : 2001 1 tete double et 2 postes Controleur de paraison 64 point MOOG Force de fermeture : 35 KN - 3500 kg Volume max du contenant. : 1,5 litres Diamètre vis : 60 mm 4 ventilateurs de refroidissement Puissance maximale de chauffe : 20 KW

BATTENFELD FISCHER BEKB 175 T blow molding machine - 29 kg of PE - 300 liters BATTENFELD blow-moulding machine capable of extruding parts up to 4500 mm. Machine equipped with a 40-liter accumulation head. HDPE capacity: 28.8 KG Closing force: 2 x 175 T with knee-bar locking system Machine equipped with 2 x 125 mm screws (20/D ratio) Capacity: 149 KG / H at 25 RPM Max screw speed: 40 RPM Blowing pressure: 7.5 bar (12-bar compressor available if required) 3-material volumetric screw dosing system (virgin material, regrind and colorant) Machine equipped with unloading clamp Can be sold with a RAPID GK 8045 shredder Machine sold with a 260 mm diameter die and a 300 mm die. It is possible to equip this machine with a 500 mm die.

Erlab Captair Filtair 936 Filter Extractor Erlab's exhaust-free, filtering chemical extractors offer the world's most powerful filtration, guaranteeing safety and performance. A system with countless benefits that provides end-to-end protection throughout the lab and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical performance criteria of the fume hood and ensures your safety at all times. Pros Complete user protection Filtration safety : All models of captair filtair filter extractor comply with the AFNOR NFX 15-21 1 Class II standard. Pollutant retention capacity of chemical vapours in the working area, guaranteed by controlling the air velocity on the façade and complying with pollutant retention standards (XPX 15203, BS 7258, DIN 12927) Sampling valve for the expelled air allows the user to control the filter ...

General SKU212T101 MakeKuehni TypeMixer setler column No.2046 Year of construction2001 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume6380 Ltr. Motor2.2 KW Specified Features - Extraction Extractorcheck Capacity6380 Ltr. Diameter910 mm Length10175 Max. temperature-10/200°C With rotorcheck Motor2,2kW, 230/400 Volt, 1420 rpm( EX) Rotor speed42 rpm MaterialStainless steel 1.4571 (316Ti) Information Floorspace1.6x1.6 m Total height11.85 m Weight2920 kg ATEX compatiblecheckExtractionKuehniColumns > ExtractionBrand > Kuehni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

Code: 0306 Brand: VM Model: 2/18 Suction system with 18 sleeves and 2 collection bags for carpentry workshops, furniture factories, sawmills, woodworking shops and various Technical data: N° 18 filtering sleeves N° 2 collection bags Motor Hp 7,5 Electrical panel Overall dimensions: mm 2800 x 1200 x 3200 h

General SKU212T092 MakeKuehni TypeEMS 600/9 - ECR 600/4 LocationBarneveld CEcheck Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume2390 Ltr. Motor1.5 KW Specified Features - Extraction Extractorcheck Capacity2390 Ltr. Diameter600 mm Length3450 mm Max. temperature100 °C With rotorcheck Getriebebau (Ex) Motor1,5 kW 220-240/380-415 Volt (EX) Rotor speed78 rpm MaterialStainless steel 1.4571 (316Ti) Information No.2776 Year of construction2009 Floorspace0,9x0,9 m Total height4,6 m Weight600 kg ATEX compatiblecheck Extra Specificationsmechanical sealExtractionKuehniColumns > ExtractionBrand > Kuehni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Ne ...

General SKUR0933 MakePfaudler Werke GmbH Schwetzingen LocationBarneveld TypeKolonne 1600 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialGlass Volume10010 Ltr. Specified Features - Extraction Capacity10.010 Ltr Diameter1600 mm Length5800 mm Max. temperature200 °C. MaterialGlass - Enamel (WWG-9115) Information No.63584 Year of construction1999 Floorspace1,9x1,9 m Total height5,8 m Weight5.670 kg Extra Specificationswithout clamp screw ExtractionPfaudler-werkeColumns > ExtractionBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU169K585 MakeLUWA TypeARD 300 No.20065 Year of construction1970 LocationBarneveld Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor1.1 KW Specified Features - Extraction ExtractorLiquid-Liquid extraction Diameterdia. 300 mm Max. temperature100 degr. C Motor0,75 kW 380/220 V Ex With variable speed drivecheck MaterialStainless steel Information Floorspace4,1 x 0,7 M Total height0,7 M Weight440 KGExtractionDiscountLuwa-smsColumns > ExtractionDiscountBrand > Luwa-sms What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU235P239 MakeQVF Engineering GmbH TypePulsierte Siebbodenextraktionskolonne DN 150 No.7989 Year of construction1998 LocationBarneveld Pressure Working pressure0.9 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume210 Ltr. Motor1.5 KW Specified Features - Extraction Extractorcheck Capacity245 Ltr Diameter168,3 mm Length6000 mm Max. temperature100 degr.C. Motor1,5 kW 500 Volt Ex MaterialStainless steel 1.4571 (316Ti) Information Floorspace8,7x0,8 M Total height0,8 M Weight900 KG Extra SpecificationsSystem consists of extraction column DN150 and pulsation head DN100 (max stroke 60 mm, 0,29 DM³ 0-150 rpm) :ExtractionQVF GlasstechnikColumns > ExtractionBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Yo ...

Manufacturer: Kowin Model: 232 Machine 1 : - Operating hours 0 - Year of Manufacture: 2024 Machine 2 : - Operating hours the machine donsen´t show operating hours . The machine was only doing g 10-15t of regrind per month from 2011 till 2024 - Year of Manufacture: 2011 Find more here - / Contact us at -

Air recovery system. 400V, 50Hz, 2,65 kW

Camfil filter unit CS 610 for industrial extraction systems Manufacturer: Camfil KG Model: CS 610 lacquered Type: Filter unit for industrial extraction systems Article number: 518110 Serial Number: 000442739182 Number of units: 2

1,1 Kw. 400 v. 50 Hz. With suction arm 3 m, hose type, internal joints. 3 units available.

PLASTIMAC LAB EXTRUDER, for blown film, suitable for testing granulate, 25 mm screw diameter, 70 mm diam. die, 500 mm collection frame, 7,5 Hp drive, complete wuth supporting structure, (corona treatment+small printer can be sold separately if required), installed power - used power in work: about 60-65% : 7,5 Hp, working width: 500 mm, conditions: good

BLOWN FILM LAB EXTRUDER, suitable for testing granulate, 25 mm screw Ø 25 L/D, 60 mm diam. die, 500 mm. pull off, 350 mm collection frame, 7,5 kW drive, complete with tower, nips and rolls, control panel, production rate 10 kg/h, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked

Brembana Helixchanger Heat Exchanger Notified body AIB VINCOTTE Pressure 4/10 bar Capacity 6600/3800L Hydr.press 7,5/14,3 bar

CTP System Creo Trendsetter VLF 5880; good condition; Video Die Cutter Hatchet OPU 200 VB Bj.2017; Observation Unit Mega Steel; Development machine Kodak THDX 165 Bj.2014; intermediate table; Outlet table. CTP System Creo Trendsetter VLF 5880; good condition; optical video punch Beil OPU 200 VB year 2017; control terminal Mega steel; processor Kodak THDX 165 year 2014; intermediate table; outfeed table.

Key data: 20 mm, 150 , 2150 U/min

with PE screw, Capacity approx. 350 kg/h complete with motor, gearbox and Heating tapes Good condition, immediately available

For sale is a compensator for a Mitsubishi S12R Condition: new (traces of storage available) Part Number: 47920-00700

The heat exchanger furnaces are part of the system and were only ordered separately. The new price of the plant was thus over EUR 2 million. The official commissioning was in April 2024, but these were only test runs and not series operation. Technical Data – Modular Chamber Furnace Plant for Homogenization of Aluminum Bolts (Used Plant) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum bolts in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks Plant design The system essentially consists of: • 1 heating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air c ...

TO WHOM IT MAY CONCERN, GDY WE VE USED COMPLETE EXHAUST GAS TURBOCHARGER ABB TPL 77-B12 AT OUR STOCK WE DISMANTLED THIS TURBO CHARGER FROM MAN 6L 50 MC-C ENGINE PLS FIND SPEC AT BELOW

For sale are new exhaust gas outlets for the turbocharger Condition: new (traces of storage available) Part Number: 37732 05500 We have other parts from JCB and Mitsubishi available If you have any further questions, please do not hesitate to contact us!

A conventional Schaudt external cylindrical grinding machine is available. Center distance: 1000mm, center height: 180mm, max. grinding diameter: 350mm, max. grinding length: 1000mm, plunge grinding length: 100mm, swivel range: 45°, machine dimensions X/Y/Z: approx. 3200mm/1700mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible.

Type : UMA90 Année : 1996 – Révisée 2014 1 tète – 1 poste Diamètre de vis : 120 mm Tète 18 litres – 16 kg Capacité production : 450 kg/h Control Paraison : 100 points Passage entre colonne : H1200 x V2100 mm Course d’ouverture maxi : 1800 mm Force de fermeture : 90T Epaisseur moule mini : 405 mm Possible fût 100l

Qty. 1 Second hand aluminium extrusion press line Mfc.: Taiyuan Force: 5000 MT Type: Front loading – single action Built: 2007 Stopped in 2016 Product weight: max. 55 kg/m Billet dia.: 279 & 406 mm (11” & 16”) Length: 600 - 1200 mm Consist of: Cold billet saw Gas heated billet furnace Extrusion press Run-out table Platen saw Quenching device Single puller Stretcher Finishing saw Dies heater

Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible.

A Lenhard extruder for butyl rubber is available. Application: insulating glass production, material: thermoplastic butyl based on polyisobutylene, max. operating temperature: 140°C, max. butyl pressure: 140bar, max. hydraulic pressure: 150bar. An on-site inspection is possible.

Extendable boiler for Kemper SPA 75 Product description Manufacturer: Kemper Type: SPA 75 Condition: used, baker's condition The kettle is integrated on a trolley The trolley is easy to drive and rotate The kettle can be rotated in all directions on the trolley Material trolley: metal Material kettle: stainless steel For max. 120 kg dough / 75 kg flour Inner à ̃ of the kettle: 76 cm, approx. 42 cm deep Outer shell of the cauldron: 81 cm Material thickness: approx. 5 cm For details see pictures.

Counter tray / Exhibit tray 600x400x10 mm  NEW! ( 10 pieces )Counter tray / Hinged plate NEWAus aluminium 0.9 mm thickness silver with 4 edgesOuter dimensions: W.: 600 mm, D.: 400 mm,  H.: 10 mm Details see picture

serial number: 6023449 Four wheel steering: ja weight: ca. 7 t : Video vorhanden : ja : 50 % lifting capacity: 2,5 To. volumn: Fassungsvolumen 0,7 cbm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Haendle Extruder type PZG60b/50 with doubleshaft mixer MDVG920a, 29 cbm/h, 30 bar

max. plate format 1130 x 950 mm 64 Laser Diodes 405nm Resolution 2400 dpi Platecounter 31260 Laser on time 940 hours only well-maintained available immediately delivery worldwide, Price on request

Nederman Dust Collector / Silo Dust Collector with Control and Compressed Air Treatment Manufacturer: Nederman Type: DFC-08M Item number: 5512680 Year of manufacture: 2023 Manufacturer of pressure vessels: RECO Gesellschaft für Industriefilterregelung mbH Type: ST148-DN25-2V-8P Year of manufacture: 2023 Serial Number: FA1049979-003 Maximum permissible pressure: 7 bar Permissible temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure Test Date: 2023-05 Control cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Control: Nederman DFC-08M Controller Compressed air treatment: Camozzi MC202-D00 Max. inlet pressure: 16 bar Outlet pressure: 0.5–10 bar Max. temperature: 50°C Electrical Components: ABB Control/Connector Housing Design: Dedusting system for silo applications with integrated filter unit and fan Accessories / Scope of delivery ...

Fisher Type: Flash Pasteurizer Year: 1999 Efficiency: 120 Hl

Ex-protected rotary valve, ZRD 200 1-5-GC, Coperion, new -40% Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical specifications: - Explosion-proof rotary valve for granules, model ZRD 200 1-5-GC, Coperion, new -40%, - Explosion-proof design, Up to max. 60°C, - Powder and granules, aluminium dust containing steel and stainless steel, - designed for a bulk density of 350 kg/m³, max. 450 kg/m³ - Without drive and bearing air purge (quote available), - Housing material: grey cast iron, rotary valve: steel, - Inlet and outlet: DN200, - Please feel free to ask us for the specifications, - Viewings are available at any time, 6 months warranty We give you 6 months warranty for these goods  ...

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan, radial fan -Motor power: 0.139 kW -Speed: 1600 rpm -Volume output: unknown -Connection air duct: 90 x 90 mm -Price per piece -Quantity: 2 pieces -Dimensions: 280/165 / H230 mm -Weight: 3.1kg / piece

Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermal expansion valve -Manufacturer: Alco, thermal expansion valve, unused in original packaging -Type: TIE-MW 55/PCN 802456 -Price per piece -Number: 2 piece -Dimension package: 105/80/H70 mm -Weight: 0.4 kg/piece

Heat exchanger, construction heating, construction dryer, heating, hall heating, hot water exchanger, fan heater, heating, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -pure heat exchanger, only usable in conjunction with a heating unit (e.g. Wacker Neuson HP 252) -Type: HX 60 -Power: 43.5 kW -Quantity: 8 pieces available -Price per piece -Dimensions: 660/720/H1065 mm -Weight: 106 kg

High-pressure radial fan, dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Exhaust gas exhaust fan -E-motor: Lammers 400/690 V/3 kW -Fan: Hansa Ventilatorenbau Type BC 280-5/4K-X/UX 1101 -Speed: 3179 rpm -Volume output: 2160 m³/h -Connection input: Ø 735 mm -Connection output: 365 x 310 mm -Dimensions: 1300/740/H820 mm -Weight: 153 kg

Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermo-expansion valve, thermostatic expansion valve -Manufacturer: Danfoss, thermostatic expansion valve -Type: TES2 R404A R507 -Price: per piece -Number: 1 pieces (Art.No. 068Z3437) -Dimensions package: 90/80/H70 mm -Weight: 0.3 kg/piece

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -The fan comes: from a chip filter system -Motor: Siemens type 1L4 207-6AA60-Z 200L -Motor power: 22 kW -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm -wing height: mm -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg