132,802 used machines on RESALE, but how to find them? Machine Search
Twin screw extruder APV Baker, int. ref. APV 5 (Baker Perkins) Ø50/25D + additional liner 10D(for 35D), this was totally revamped in 2017, liners and screws are in quite good conditions, reduction gear was replaced in 2021. Operator panel with recipes and 14 heating zones, all in good conditions. Find more here - / Contact us at -
- SFE. Superfast 2x18L CO2 Extraction System manufactured by Thar Process. The supercritical fluid extraction system is designed to extract oil, oleoresins, and other ingredients which become soluble in supercritical CO2 at high pressure and temperature. SFC. Isolator SFC 20 CO2 Purification System manufactured by Thar Process. Purification SFC is a normal-phase chromatographic technique that uses CO2 as the main mobile phase. Find more here - / Contact us at -
Complete with warning lamp and extension cord reel Brennenstuhl Auction-ID: A1-46604-264
-Mechanical quick coupler -Hammer lines -Tooth tray -Push blade -Tracks with rubber pads -No documents Auction-ID: A3-43529-128
Berstorff ZE 90A x 36D compound extruder Dynamische Tragzahl: 633 kN(Dynamic Load Capacity) Theoretische Lebensdauer bei 120 bar und 300 l/min: 40,000 h(Theoretical Lifespan at 120 bar and 300 l/min) (Siehe Lebensdauerdiagramm, Punkt 8.3.4)(See Lifespan Diagram, Point 8.3.4) Anzahl der Vollzylinder (4 D): 1(Number of Full Cylinders (4D)) Heizleistung pro Zylinder: 9.2 kW(Heating Power per Cylinder) Anzahl der offenen Zylinder (4 D): 2(Number of Open Cylinders (4D)) (1x Füllzylinder 4D unbeheizt)(1x Fill Cylinder 4D Unheated) Heizleistung pro Zylinder: 6.8 kW(Heating Power per Cylinder) Anzahl der Vollzylinder (6D): 2(Number of Full Cylinders (6D)) Heizleistung pro Zylinder: 18.4 kW(Heating Power per Cylinder) Anzahl der offenen Zylinder (6D): 1(Number of Open Cylinders (6D)) Heizleistung pro Zylinder: 16.0 kW(Heating Power per Cylinder) Anzahl der Kombizylinder (6D): 1(Numb ...
Lips LMP Extention Printcard 1185082-6111610321 WÄrtsila Art.No:E000004111
Complete module for supply of two welding workstations with Integrated welding fume extraction from Teka (welding fume separation class W3, with automatic filter cleaning) for steel. Movable product. Small appliances (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively, extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled included 1 frame 2 Boom arms AGA 2020 1 tool cabinet 1 gas bottle holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding machines of the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table, which can be seen in pictures 5 &6, can be purchased separately! Currently, a trade fair return and a used welding workstation (SAP) are available. - We loo ...
-Mechanical quick coupler. -Hammer lines. -Tooth tray. -Push blade. -Tracks with rubber pads. -No documents. Auction-ID: A3-43529-127
Unused tyres (4pcs) 26.5-25-28pr Auction-ID: A3-43529-6891
Length about 25 sqm Auction-ID: A1-45722-37
Producer: Fischer Year of Make: 1999 Output: 250hl/pc
Steel tank with inner coating (epoxy resin) Can be used above or below ground, can be used as a firefighting water tank or rainwater tank Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
horizontal steel tank with inner coating Suitable for; Extinguishing water or rainwater On request, the tank can be provided with an anti-corrosion coating. Fire brigade connections (A-coupling, suction line), inlet and overflow, new dome DN625 can also be ordered. Volume: 45,000 L Dimensions: Ø 2.80 × 7.70 m long Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
Steel tank with inner coating (epoxy resin), with two domes Can be used above or below ground Volume: 22 m³ Dimensions: Ø 2.60 m × 4.50 m long On request and as required, the tank can be equipped with a brand-new dome, fire brigade connections, suction line, inlet and overflow. In addition, the tank is treated with a new external coating (anti-corrosion). Anti vortex plate, water level gauge, etc. can be offered. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
Key data: 50 mm
50mm Extruder Manufacturer: Rutil Screw diam. 50mm LD ratio 15:1 Max speed (50 Hz) 70rpm
Direction of rotation - housing position LG 0 Operating temperature 20° C Density 1.2 kg/m³ Flow rate 3,600 m³/h Total pressure increase 3947 Pa Speed 2,950 min-1 max. operating temperature 40° C Motor rated power 7.5 kW Voltage 400 V Frequency 50 Hz Weight approx. 218 kg
Screwed plate heat exchanger 300 KW, 60 sqm heat exchanger area
Viewing by appointment Auction-ID: A1-40252-91
HÄNER HCM450 Concrete mixing bucket for wheel loaders and excavators New device Working width: 1650 mm Height: 900 mm Depth: 930 mm Nominal capacity: 450 l Maximum capacity: 500 l Curb weight: 750 kg Concrete weight: 1,140 kg Total weight: 1890 kg Required oil volume: 60-150 l/min Maximum pressure range: 240 bar Open/Close Hose Connectors: 1/2 inch Hose Fittings Turn: 1/2 inch Drive Type Mixing Shaft: Chain Important safety note: The total weight of the mixing bucket may not exceed 90% of the tipping load (kinked) of the carrier device. Our HCM450 concrete mixing bucket has the following data and specifications: – Side panels made of 12 mm S355 - Base body made of 10 mm S355 – Mixer screw rings made of wear-resistant HB500; Thickness 15 mm – Mixer shaft made of C45 solid steel; Diameter 65 mm - Cutting edge made of 20mm HB400 – Roller bearings with free ...
AST 220 / POMINI-FARREL flat head / POMINI-FARREL 18"x15" Slabber / BANDERA Slabber. Refer to code 1043-1044-1045-1046 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
Length 2100mm, entrance size approx. 220x70mm. Auction-ID: A1-46553-39
cold feed extruder - 60 mm x 18 D vacuum, with feed roller, drive 22 KW, screw speed 10 to 60 rpm, with gear pump, 5 TCU,
cold feed vacuum extruder Troester 90 mm x 18 D, with feed roller, drive 46 kW, pie speed 10 to 60 rpm, 5 TCU,
Viewing by appointment Auction-ID: A1-40252-87
Viewing by appointment Auction-ID: A1-40252-90
Key data: 45 mm, 1350 , 298 U/min
Single Screw Extruder Cincinnati Talos 45-30 G Year of construction 2009 + Corrugator Maintools MTC 60/90 Year of construction 2006 Both machines are in good condition, and immediately available
Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...
Viewing by appointment Auction-ID: A1-40252-86
maximum number of results exceeded
please refine your search
500 € 
