127,529 used machines on RESALE, but how to find them? Machine Search
Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round blade, electrically oscillating knife and a milling machine (incl. suction device) • Multifunction tool head for holding up to 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universa ...
CNC unit for boring and routing Brand: Atemag Type: Function Line Extra with two tool interfaces angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 32 / ER 16 Spindle for omega router/ ER 16
CNC unit for corner notching in off-set design Brand: Atemag Type: Function Line Extra 2 Max drive speed 8,000 R.P.M. Max. tool spindle speed 12,000 R.P.M. Gear ratio i = 1:1,48 Turning direction left/right Torque max. 20 Nm Tool interface: Special Attention: price is just valid for standard version
used
Number of sanding units: 4 St sanding width: 190 mm Sanding height max.: 4-180 mm weight: 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians -------------------------------------- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geom ...
Stock number: 3912 PROCESSING Manufacturer: EXCELL, Type: 810 Machine NO.: ES 8031, Year of manufacture: 0 Specifications: Table size 900 x 480 mm Large table load 400 kg Longitudinal movement (X) 810 mm Transverse movement (Y) 510 mm Vertical movement (Z) 560 mm Size distance spindle/table 700 mm Spindle Taper 40 Iso Spindle motor 9 Kw Tool changer 25 places Control Fanuc OM Fabr. Accessories: Cooling water system. Operating instructions Length: 2200 mm, Height: 2600 mm, Width: 3500 mm, Weight: 5400 kg
Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton
Machine YOC 1992 Feed speed 8+16 m Solid wood edges, width up to 13 mm Rolls up to 3 mm Edge height max. 45 mm Aggregates: PE Hot Melt Glue Cartridge System Type 1906 1.9 kW Printing unit 1914 1 + 3 rolls Caps 1978, swivel 0-15 degrees Flush milling machineType 1942 2 x 0.6 kW Straight / chamfer up to 15 degrees Radius milling type 1943 2 x 0.6 kW Bevel 45 degrees Radius scraper blade type 1927 Buffing unit Length approx. 5,030 mm Width 1,760/1,605 mm Weight approx. 1,300 kg
pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 52/80 Hub/min ram - range of adjustment: 60 mm table surface area: 850x550mm mm ram surface: 420x220 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø 45 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2000x2000x2700mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description TWIN HELIX EXTRUDER Screw Diameter 90 mm L/D 30 Screw Speed 161 rpm Barrel Zones 5 Motor Power 91Kw Motor Speed 1750 rpm Automatic Screen Changer Produced Material PP & PE
Key data: 3000 mm, 920 mm, 50 mm
CNC Drilling Center C-Express Classic Drilling/sawing/milling from below Easy operation via graphical user interface 1 Machine Software License 19" LCD color display, mouse keyboard Machine weight 850kg Machine dimension: 2,100x1,500x1,950mm Milling spindle 3.3kW (S1), 24,000rpm Collet ER32 manual Drill Head DH 15 6H1S 9 vertical drilling spindles 6 hotizontal drilling spindles 1 grooving saw X direction More information on request! Safety FELDER KG KR-Felder-Straße 1 6060 HALL IN TIROL Phone: +43 (0)5223 58500 Infofelder-Group
Clamping force: 350kN, tie bar distance: 280mm/280mm, platen dimensions X/Y: 410mm/410mm, min. mold installation height: 180mm, max. opening stroke: 350mm, max. platen distance: 530mm, screw diameter: 22mm, shot volume: 47.5cm³, shot weight (PS): 41g, injection pressure: 2440bar, control: NC4, heating power: 6.3kW. Machine dimensions X/Y/Z: approx. 3100mm/1100mm/1600mm, weight: approx. 1800kg. On-site inspection is possible.
: Expert Eda450 Size of table plate: 450 mm weight of the machine ca.: 380 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t passage width: NA mm stroke: 180 mm table length: 690 mm table width: 530 mm distance between columns: 420 mm total power requirement: 18 kW weight of the machine ca.: t dimensions of the machine ca.: m Hydr. 4-Pillar Press for Embossing/Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Load capacity: 1000kg, wheelbase: 1177mm, load center: 600mm, lifting height: 1920mm, travel speed: 6km/h, lifting speed: 120mm/s, lowering speed: 230mm/s, max. gradeability: 10%, turning radius: 1438mm. Transport dimensions X/Y/Z: approx. 1800mm/800mm/2400mm, weight: approx. 600kg, operating hours: 590h.
Two almost identical Still pallet trucks are available. Load capacity: 2000kg, drive: electric, drive power: 2.3kW, max. battery capacity: 375Ah, lifting height: 2110mm, wheelbase: 1518mm, tire type: polyurethane, fork length: 1150mm. Machine dimensions X/Y/Z: approx. 2100mm/720mm/1300mm, weight: approx. 1100kg, operating hours 1/2: 4472h/4904h. Documentation available. On-site inspection is possible.
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 913 kg 280030.XD7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
volume capacity: Filter 3200 connected load: 400 kVA weight of the machine ca.: 300 kg dimensions of the machine ca.: 1 x 1 x 2.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A system for the mechanical separation of meat and bones, tendons or hides is available. Throughput capacity: approx. 3t/h, filling volume: 800l, working filling capacity: 80%-95%. Machine dimensions X/Y/Z: approx. 2300mm/1800mm/2100mm, weight: approx. 2300kg, control: Siemens Simatic, operating hours: 7504h. Tools included. Documentation available. On-site inspection is possible. Expected to be available from August 2025.
DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...
pressure: 125 t no. of strokes: 55 Hub/min stroke: 20 - 160 mm table-size: 970 x 660 mm max. ram stroke: 160 mm min. ram stroke: 20 mm throat: 340 mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: 1,5 x 3,0 x m With motor, gear reduction, wheel protection, air friction clutch, additional brake (Make Desch) and safe control according to UVV, Mech. Overload protection in the ram Two-hand operation, control cabinet The price is ex stock as the press is, is, or is. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t distance between columns: 495 mm stroke: 150 mm distance table/ram, max. stroke up, adjustment up: 300 mm table surface area: 490 x 400 mm hole in the table: 50 mm table height over floor: 950 mm column travel -side: 155 mm ram surface: 150 mm feed down: 480 mm/sec feed up: 480 mm/sec working feed: 20 mm/sec oil volume: 115 l power capacity: 7,5 kW weight: 2,2 t dimensions of the machine ca.: 1,35 x 1,00 x 2,21 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PREALPINA EXTRUDER 130 mm., For PE PP ABS PS PC PS, nominal throughput rate 500-600 kg/h depending on material and feeding rate, 280 kw. d.c. drive and starter (new 2019), Electric cabinet, CE compliance, users manual, electrical drawings, crammed feeding unit, Barrel with screw diam.130 mm.35 L/D, N.1 vacuum degassing pump, Constructed 1996,, offeres : checked for good working conditions OR reconditioned, installed power - used power in work: about 60-65% : 280, availability: ready-to-go
Constructed according to the high Italian quality standards, Made in sturdy carbon steel welded structure Flat bottom with horizontal screw and doctor blade, or conical bottom with diagonal screw (depending on project requirements) plexiglass inspection window, Electric motor bespoke to project material and size paddle type minimum level indicator Bolted inspection door, Safety devices, CE compliance, drawings, user manual, Can be integrated with our [DRYING SYSTEM](.germanplast.eu/listings/4115725-drying-system-for-vertical-mi xers), price options: size and shape bespoke to project
B&A REF: 9164 TON: 80 SCREW DIAMETER: 40MM SHOT WEIGHT: 208 STROKE VOLUME: 231CM3 INJECTION PRESSURE: 2025AR PLATEN SIZES: 590 X 580MM DBTB: 400 X 400MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 250MM EJECTOR STROKE: 150MM CONTROLS: NC4 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 11KW SCREW DRIVE: HYDRAULIC
Demag Ergotech EXTRA 50-200 BJ2005 for sale/scrapping, but the control is already missing here.Enclosed you will find the photos and technical data of the machine for sale with BJ 2005. The machine currently has a plasticizing unit with 25mm screw (BJ 2014) installed, we sell the original plasticizing unit with 30mm screw that is still working for the machine. The machine worked until it was taken out of service, we installed the control system on another machine.
2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003
pressure: 60 t throat: 280 mm stroke: 10-140 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 740x560 mm ram surface: 380x195 mm hole in the table: 300x200 mm table height: 760 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 t throat: 220 mm stroke: 8-96 mm no. of strokes: 120 Hub/min ram - range of adjustment: 50 mm table surface area: 580x440 mm ram surface: 305x170 mm hole in the table: 215x175 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 45 t throat: 230 mm stroke: 4-80 mm no. of strokes: 120 Hub/min ram - range of adjustment: 55 mm table surface area: 695x455 mm ram surface: 365x180 mm hole in the table: 220x180 mm table height: 890 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 300 mm stroke: 10-140 mm no. of strokes: 60 Hub/min ram - range of adjustment: 60 mm table surface area: 800x500 mm ram surface: 430x230 mm hole in the table: Ø150 mm table height: 860 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Presstek Dimension Exel with external Affinity chilling unit, AMS -air management system, Dell Dimension computer, serial tools, connecting cables and some repro materials. Very clean and maintained. Available immediately.
Turntable diameter: 150mm, max. pallet dimensions X/Y: 800mm/1200mm, max. product height: 2200mm, max. load capacity: 2000kg, rotation speed: 10rpm, lifting/lowering speed: 4m/min, film roll width: 500mm, max. film roll diameter: 300mm, film core diameter: 76mm, max. roll weight: 20kg, film thickness range: 17µm-35mm, machine weight: approx. 350kg. Documentation available. An on-site inspection is possible.
Min. schuifraamhoogte: 200 mm Max. Schuifraamhoogte: 460 mm 230v / 50 Hz Gassenfilters: Type A (Organisch) / Type BE (zuur) , Type F (Formaldehyde) en Type K ( Amoniak en Amines)
table length: 1500 mm table width: 1000 mm table height (lateral area): 100 mm weight: 255 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 1500 x 1000 x 100 mm - Extreme plasma nitrided version with scal ...
table length: 3000 mm table width: 1500 mm table height (lateral area): 200 mm weight: 1374 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Extreme plasma nitrided version wit ...
table length: 2000 mm table width: 1000 mm table height (lateral area): 200 mm weight: 699 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with ...
table length: 2400 mm table width: 1200 mm table height (lateral area): 100 mm weight: 499 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures. The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Extreme plasma nitrided version with scal ...
table length: 2000 mm table width: 1000 mm table height (lateral area): 100 mm weight: 351 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Extreme plasma nitrided version with scale ...
table length: 3000 mm table width: 1500 mm table height (lateral area): 100 mm weight: 753 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Extreme plasma nitrided version with scale ...
table length: 2400 mm table width: 1200 mm table height (lateral area): 200 mm weight: 1069 kg dimensions of the machine ca.: 2400 x 1200 mm SIEGMUND authorized dealer - all items available! The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 ...
maximum number of results exceeded
please refine your search
