ex cell o used for sale

Code: 0298 Brand: OSAMA Model: S1R-250 - CE Standard Manual 1 roller gluing machine for edges and block wood, carpentry, furniture, laminated wood beams, and various - CE Standard Technical data: Max working length 250 mm Roller diameter 150 mm Feed speed 28 m/min Motor power Hp 0,25 Working table height 800 mm Overall dimensions mm 1500 x 700 x 850 h Weight kg 100

Technical data: Travel X/Y/Z: 700 / 250 / 430 mm Top slide travel: 630 mm Spindle speeds: 45 - 1660 1/min Spindle holder: SK 40 Control: conventional Feed table: 24 - 402 mm/min Milling head rotatable: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (WxDxH), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital display - Machine light - Coolant device - Machine shoes

General SKU390X1042 MakeBühler LocationBarneveld CEcheck TypeOTW-150 CRF Main Features MaterialStainless steel Motor30 KW Surface1.66 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1,66 m² Bed sizes2024 x 822 mm Product inletDN200 Product outletDN200 Air inletDN400 Air outletDN400 With fancheck Motor± 30 kW 500V 2960 rpm MaterialStainless steel 1.4541 (321) Information No.10506369 Year of construction2012 Floorspace2,3 x 0,92 m Total height1,9 m Weight600 kg Extra SpecificationsOperating parameters: Maximum operating temperature: 200°C Pressure range: 100 / –50 mbar Air capacity: approximately 8,160 m³/h Material throughput capacity: up to 2,250 kg/h Included equipment: Pulsator with electric motor rated at 0.55 kW, 290/500 V, with an adjustable operating speed range of 34–171 rpm Piller blower, supporti ...

General SKU390X1037 MakeBühler LocationBarneveld TypeOTW-150 CRF Main Features MaterialStainless steel Motor30 KW Surface1.66 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1,66 m² Bed sizes2024 x 822 mm Product inletDN200 Product outletDN200 Number of sections:1 Air inletDN400 Air outletDN400 Motor0,55 kW, 500 volt, 1360 rpm With variable speed drive34-171 rpm MaterialStainless steel 1.4541 (321) Information No.10506368 Year of construction2012 With switchcheck Floorspace3,40x1,30 m Total height2,20 m Weight1000 kg Extra SpecificationsOperating parameters: Maximum operating temperature: :200°C Pressure range: :100 / –50 mbar Air capacity: approximately :8,160 m³/h Material throughput capacity: up to :2,250 kg/hIncluded equipment: Pulsator :with electric motor rated at :0.55 kW, :290/500 V, with an a ...

General SKU390X1051 MakeBühler LocationBarneveld TypeOTW 300 Main Features MaterialStainless steel/Aluminium Motor0.55 KW Surface3 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface3 m2 Product inletDN200 Product outletDN200 Air inletDN600 Air outletDN600 Vibro motorcheck Motor0,55 kW, 500 volt, With variable speed drive32-171 rpm With fancheck Fima Motor75 kW, 290/500 volt, 2970 rpm Capacity16.200 m3/h Fluidbed dryers continuous Cooling beltcheck With motor0,55 kW, 290/500 volt, 1380 rpm Belt speed34-171 rpm MaterialStainless steel 1.4571 (316Ti) Information No.20330614 Year of construction2007 With switchcheck Floorspace4,80x2,40 m Total height1,20 m Weight1200 kg Extra SpecificationsCap. 3m2, product flow rate 2500-4500 kg/h, : with Fima blower, type RM51U500KGB GL360 and rotary valve Fluid bed dryers continuo ...

General SKU390X1052 MakeBühler LocationBarneveld CEcheck TypeOTW 150 Main Features MaterialStainless steel Motor0.55 KW Surface1.5 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1,5 m² Product inletDN200 Product outletDN200 Number of sections:1 Air inletDN400 Air outletDN400 Vibro motorcheck Motor0,55 kW, 500 V, 1380 rpm With variable speed drivecheck (34 — 171 rpm) With fancheck Motor75 kW, 290/500 V, 2970 rpm, (Ex) Capacity2250 kg/h Cleaning by air pulsecheck Max. temperature200 °C MaterialStainless steel 1.4541 (321) Information No.20.330.943 Year of construction2010 Floorspace3,35 x 1,0 m Total height1,90 m Weight600 kg Extra SpecificationsCooling air volume: approx. 8100 m³/h Throughput capacity: max. 2250 kg/h Product inlet temperature: 150 °C Product outlet temperature: approx. 32 °C Design tempera ...

General SKU351X817 LocationBarneveld MakeForberg TypeF1000 Main Features MaterialStainless steel Volume1000 Ltr. Motor15 KW Specified Features - Paddle mixer Paddle mixercheck Double shaftcheck Useful capacity1000 Ltr. Trough sizes1500 x 1700 x 1100 mm With covercheck Inletø 500 mm, 300 mm and 250 mm Outlet1000 x 300 mm Glands air purgedcheck Motor15kW 380V Speed mixing shaft± 40 rpm MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) Information No.8041D Year of constructionunknown Mounted on framecheck Floor space1,3x2,75 m Total height4,2 m Weight3280 kg Extra SpecificationsThis paddle mixer is equipped with an output screw: Output screw length: 2 m Diameter: 150 mm Pitch: 100 mm Outlet: 160 × 140 mmPaddle mixersForbergMixers > Paddle mixersBrand > Forberg What you can expect from Foeth: -- Machine is in working condition -- At a reduced pr ...

General SKU340X782 LocationBarneveld CEcheck MakeOCS TypeHC Specified Features - Miscellaneous transport Capacitymax. 3750g Motorcheck Information No.1004422 Year of construction2009 Floor space1,3x0,9 m Total height1,8 m Weight260 kg Extra Specificationsocs checkweigher: max weight: 3750g division value: 0,5g equipped with receipt printer conveyor length :1300 mm conveyor height 800 mm, adjustable : Miscellaneous transportOCS WipotecConveying systems > Miscellaneous transportBrand > OCS Wipotec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU390X1009 MakeBühler LocationBarneveld CEcheck TypeOTWG-160-C (static) Main Features MaterialStainless steel Motor0.55 KW Surface1.59 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1,59 m² Product inlet190 × 110 mm Product outletDN 150 Air inletDN 400 Air outletDN 400 Motor0,55 kW 290/500 V With variable speed drivecheck pulsator 26–128 rpm With fancheck (PILLER: Type: 40351KE 80315) Motor30 kW Capacity3.1 m³/s Max. temperature250 °C Fluidbed dryers continuous Cooling beltcheck MaterialStainless steel 1.4306 (304L), Stainless steel (Sandvik 1200SA) Information No.10 263 218 Year of construction1996 Mounted on framecheck Weight1050 kg Extra SpecificationsVolume 2,7 m3 max pressure till 250°C, +0,2 bar, max pressure till 150°C, 0,1 bar, max temperature 250°C Fluid bed dryers continuousBühlerDryer ...

Equipment for washing industrial tanks under high pressure. KONGSBERG OFFSHORE, LARGE UMBILICAL REEL 37 LINE, serial number 01.

cutting diameter: max. 225 mm saw band length: 2.480 mm width of saw-band: 27 mm dimensions of saw-band: 2.480 x 27 x 0,9 mm cutting angle: 0 - 60 ° band speed: 20 - 90 m/min Cuttingrange 90°: max. 225 mm capacity 90 degrees: square: 190 mm capacity 90 degrees: flat: 150 x 245 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 120 x 90 mm capacity 45 degrees: round: 145 mm capacity 45 degrees: square: 150 mm capacity 45 degrees: flat: 190 x 150 mm total power requirement: 1,5 kW weight of the machine ca.: 185 kg dimensions of the machine ca.: 1,5 x 1,2 x 1,6 m Documents: Saw Bands: 1x Coolantsystem: Metal Bandsaw OPTIMUM - OPTIsaw S 275 PV The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used extruder motor 135 kW

The line consists of the following components: 1 - Single-Screw Extruder (Ankle) - Type :Single-screw extruder (Ankle) - Description : Gentle compression through optimized screw design. Output up to 120 kg per hour. Original manufacturer drawings available. - L/D Ratio : 60/30 - Motor Type MDFQARS 132-32 with insulated B bearing - Gearbox Type : FZ 600.2-Z-ED 60 - Control System: EXTRUSION PACK control unit by RESOTEC. Has functioned very well in operation. 2 - Water Cooling Bath - Description :Water bath cooling line with continuous cooling water supply. High-capacity plate heat exchanger included. - Tank Capacity : 440 liters (at full fill) - Cooling Control :Controlled via continuous cooling water feed - Width : 50 cm - Depth : 35 cm - Length : 252 cm - Height-Adjustable Feet (current setting) : 72 cm 3 - Granulator - Manufacturer : C.F. Scheer and Cie - 70435 Stuttgart, Germany ...

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps. Replacemen ...

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

An old hardness tester is offered. It still has the old, extremely stiff frame, which is no longer used today. There are nine Rockwell diamonds, of which at least three are still new.

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Working space: Width: 600 mm Height: 650 mm depth: 800 mm External dimensions: Length: 1200 mm Width: 900 mm Height: 2000 mm

The machine is in good technical condition, testing is possible by prior arrangement.

Racking hall consisting of cantilever racks and pallet racks, OHRA, floor area approx. 867m2 – used - : Price from location: 99.500.-€ (net), for self-dismantling! Price for disassembly on request. For an extra charge, the material for closing a gable side is also available! Manufacturer: OHRA Year of construction: 2019, the sheets 2021 Dimensions of the hall: Width approx. 17.35m Length: approx. 50m Height: Shelf approx. 6,385mm Height ridge approx. 7.10m After dismantling, one long side of the hall is open (where it now stands at the existing hall) Cantilever rack: 2 rows of 25 double-sided frames = a total of 50 pieces of cantilever rack frames double-sided Arm length: 1.20m Arm Load: 1,400kg Load center of gravity: 600mm Stand load per side: 4,200kg Wheelbase: 2m Arms are plugged in Arms with load deflector, device for roll-off protection Incl. palle ...

General SKU202X016 MakeABL Anlagentechnik/ OFRU LocationBarneveld TypeASc-500 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume510 Ltr. Specified Features - Distillation Distillation installationcheck Capacitybruto 500l, netto 250l Max. temperature170°C With stirrercheck Motorcheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Distillation Capacity510/55l Information No.020113 Year of construction2013 Year of construction2013 Mounted on framecheck With switchgearcheck ( as is) ATEX compatiblecheck Extra SpecificationsWas used to regenerate(recover) the solvent after filtration step before loading into a tray dryer... in this case acetone were captured in the IBCs ,to reduce the footprint of lost solvents...the recovery system will work with similar solvents as wellDistillationOFRUColumns > DistillationBrand > OFRU ...

General SKU237W266 LocationBarneveld CEcheck MakePhartec Krause Main Features MaterialStainless steel Motor4 KW Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Miscellaneous filters CapacityPermeability 700 l/h CapacityConcentrate discard 300 l/h Information TypePhartec RO600-2 St Year of construction2001 Floor space2,0 x 0,80 m Total height1,75 m Weight650 kg Extra Specifications- water quality 3,0 µS - control cabinet as is - Grundfos water pumps, type CRN 3, cap. 3 m3/h, 2,20 kW - Grundfos water pumps, type CRN 2, cap. 2,5 m3/h, 1,50 kW, - 2 filters -6 pressure pipes Miscellaneous filtersPhartec KrauseFilters > Miscellaneous filtersBrand > Phartec Krause What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU358T1079 MakeOKKN Sudhess Rohrleitungsbau GMBH No.2689 & 2718 Year of construction2689: 2015: 2718: 1986 LocationBarneveld Pressure Vacuum possiblecheck Working pressure shell10 Bar Working pressure tubes6.5 Bar Tubular vacuum possiblecheck Specified Features - Distillation Distillation installationcheck Vessel sizesdia. 800x11530 Number of columns:1 Heating surface45,6 m² MaterialStainless steel 1.4571 (316Ti) Distillation Heat exchangercheck Verticalcheck Heating surface45,6 m² Tube capacity300 Ltr. Number of tubes:484 Tube diameter25 mm Tube length1200 mm Wall thickness tubes2 mm Max. temperature0/250 °C Shell capacity200 Ltr. Shell diameter800 mm Shell length1200 mm Wall thickness shell5 mm Max. temperature0/250 °C Shell with expansion jointcheck Shell connectionsDN100 (2x) Information Floorspace1,6x1,6 m Total height11,5 m Weight4 ...

General SKU371T1118 LocationBarneveld MakeEdwards Pressure Vacuum possiblecheck Main Features MaterialMild steel Volume400000 Ltr. Motor3.7 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:2 Capacity400m³/h With motor2,2kW, 220-240/380-415 With motor1,5kW, 220-240/380-415 Inlet100 mm Outlet25 mm Information TypeA38513935 Mach.No.297 Year of constructionunknown Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck(as is) Floorspace009x0,55 m Total height1,15 m Weight350 kg Extra Specificationsmachine is a 2-stage vacuum pump. Consisting of: Edwards Mechanical booster model EH 500A Edwards High Vacuum Pump model E2M 80 Vacuum pumpsEdwardsPumps > Vacuum pumpsBrand > Edwards What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping  ...

used control panel BA 16 for temperature control with CAN open

Inv. Num. : 8966 Type: Optimat KAL 210/A3/S Producer: HOMAG Created: 2008 Parameters: Control System: Power Control PC 22 Binding height: 950 mm Edge thickness: 0.3-3 mm Part thickness: 12-40mm Feed speed: 18-25 m/min Minimum. Material width: 60 mm Machine dimensions: 8300 × 1300 × 1800 mm

A high-performance Homag Edgebanding Line paired with a Ligmatech Automatic Return System. This combination allows for a "one-man operation," where the machine applies the edges and then automatically sends the panels back to the operator for the next pass. Below is a professional draft for an online listing. --------------------------------------------------------------- For Sale: 2007 Homag Optimat Edgebanding Cell Featuring: Homag KAL 310 Edgebander & Ligmatech ZHR 05 Return System This is a complete, industrial-grade edgebanding solution manufactured in Germany. The set consists of a high-speed Homag KAL 310 single-sided edgebander and a Ligmatech ZHR 05 Boomerang return conveyor. This setup is designed for high-volume production, significantly reducing labor costs by allowing a single operator to manage the entire infeed and outfeed process. Machine 1: Homag Optimat KAL 310/10/ ...

This 4-axis Weeke Optimat BP 145 was manufactured in 2000. A robust CNC processing center, it offers advanced capabilities for precise and efficient machining. Ideal for those looking to enhance their production with a reliable used machine. Contact us for more information.

This Okuma LB400-M was manufactured in 2007. A robust turn-mill centre featuring a swing diameter over bed of 620 mm and over saddle of 420 mm. It offers a bar capacity of 80 mm and a chuck size of 400 mm. The spindle operates at speeds up to 3,500 rpm, powered by a 45 Kw motor. Includes a 12-position motorized turret. Contact us for more information about this machine.

This HOMAG Optimat BAZ41/30/K Event was manufactured in 2002. A used CNC processing center with a working area of 3000 x 1050 mm. Consider the opportunity to buy this HOMAG Optimat BAZ41/30/K Event CNC processing center. Contact us for more information.

This 3-axis Okuma LB 3000 EX turn-mill centre was manufactured in 2011. It features a maximum turning diameter of 340 mm, a turning length of 950 mm, and a spindle speed up to 5,000 rpm. The machine includes a 12-position tool turret and supports driven tool speeds up to 6,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma LB 3000 EX machine we have for sale. Contact us for more information.

Manufacturer: ABB Model: IRB 1200-7/0.9 Omicore Warranty until 23.09.2026 Reach 901 mm Load capacity 7 kg Additional arm load 0.5 kg Axles 6 Robot controller: Omicore C30 Position repeatability: 0.013 mm Cycle time 7 kg version 1 kg pick & place cycle 25 x 300 x 25 mm: 0.4 s Maximum TCP speed: 7.3 m/s Max. TCP acceleration: 35 m/s² Acceleration time: 0 –1 m/s 0.06 s Robot footprint: 210 x 210 mm Weight: 54 kg MANIPULATOR - Manipulator variant: IRB 1200-7/0.9 - Manipulator color: ABB Graphite White std - Manipulator protection: Base 40 - Robot cabling: From the base side STEERING - Control variant: OmniCore C30 - Control Housing: Base - inch rack mounting kit: Yes - Operating temperature: max. 45 °C - Mains voltage: 220–230 V AC +10%/-15% - Connected Services: Wired LAN - Ethernet Switch: 5-port Ethernet switch - Additional logic 24 V power supply: 24 V, 8 A - Fle ...

This 5-axis Okuma LT 300 MY was manufactured in 2021, featuring a max turning diameter of 350 mm and a bar capacity of 65 mm. It supports spindle speeds up to 5,000 RPM and includes a motorized 12-position turret. Ideal for complex turning operations, the machine also offers rapid traverse rates and a substantial distance between centers of 1,200 mm. Consider the opportunity to buy this Okuma LT 300 MY horizontal turning machine. Contact us for more information.

This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details.

This 3-axis Optimum Optimill F150 was manufactured in 2017 and features a Siemens Sinumerik 828D control system, a vertical spindle type SK40 with a speed range of 10-10,000 rpm, and a carousel tool changer with a 16-tool capacity. It supports a maximum table load of 350 kg and includes a screw-type chip conveyor. If you are looking to get high-quality milling capabilities, consider the Optimum Optimill F150 machine we have for sale. Contact us for more information.

This 3s OKAMOTO ACC 450 DXA was manufactured in 2001. It features a grindable surface of 450 × 150 mm and a longitudinal travel of 530 mm, making it suitable for various grinding applications. With a maximum load capacity of 120 kg on the table, this machine offers robust performance. Consider the opportunity to buy this OKAMOTO ACC 450 DXA surface grinding machine. Contact us for further details.

This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine.

This 3s LVD Orion 3015 Plus was manufactured in 2013. It features a powerful 2500 W Fanuc HF-excited CO₂ laser, capable of cutting various materials with a maximum sheet size of 3000 × 1500 mm and a weight of 570 kg. The machine offers impressive positioning speeds of 100 m/min on the X/Y axes. Consider the opportunity to buy this LVD Orion 3015 Plus fiber laser cutting machine. Contact us for further details.

This 3-axis OMAX MAXIEM 2030 30 HP AJet was manufactured in 2018, featuring a CNC Waterjet Cutting System with a 5-axis cutting capability. It includes a robust 30 HP pump, MAXJET® 5i cutting head, and a cutting envelope of 3,061 mm by 2,019 mm. Ideal for high-precision applications, it supports a maximum material load of 1,465 kg/m². Consider the opportunity to buy this OMAX MAXIEM 2030 waterjet cutting machine. Contact us for more information about this machine.

This 3-axis ONA DB300 die-sinking EDM machine was manufactured in 2006. It features an X-axis travel of 300 mm, Y-axis travel of 200 mm, and Z-axis travel of 250 mm. The work table dimensions are 400 x 300 mm, with a maximum workpiece weight of 200 kg. If you are looking to get high-quality die-sinking capabilities, consider the ONA DB300 machine we have for sale. Contact us for further details.

This MAYER Otto Meyer Type PS80P was manufactured in 2019. A robust panel saw with a cutting length and width of 4300 mm each, powered by a 9 kW main motor. Features include optimized travel speeds via an additional frequency converter and an automatic electronic clamping detection for panel corners. Consider the opportunity to buy this MAYER Otto Meyer Type PS80P panel saw. Contact us for more information.

General SKU213P158 LocationBarneveld MakeFUELLPACK Maschinenbau (DE) Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Motor18.5 KW Inlet diameter650 mm Specified Features - Deaerators Vacuum de-aeratorcheck Capacity50000 Ltr/h Vessel capacity(2X) 500 Ltr Vessel diameterdia.650mm Cylindrical height1500mm With vacuum pumpwaterring, 33 mbar Motor11 KW, 400 Volt With product pump/ (2x) Condensate pump 43 m3/h Motor18,5 KW, 380 Volt Information TypeONEX V/V Number2210040914 Year of construction1992 Mounted on framecheck With switchgearcheck Extra Specificationswater inlet DN100, water outlet DN100, raw water inlet 1 :DeaeratorsFuellpackDe-aerators > DeaeratorsBrand > Fuellpack What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...

This HOMAG Optimat LPP306 was manufactured in 2019. A used planing and profiling machine featuring six working spindles, it handles workpiece widths up to 250 mm and heights up to 160 mm. Equipped with PowerControl and powerTouch LPP300 for enhanced control, it offers feed speeds from 6 to 24 m/min. Spindle speeds are adjustable up to 8,000 rpm, ensuring versatility and efficiency in wood milling applications. Contact us for more information about this machine.

This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine.

This SCM Olimpic K560 edgebander was manufactured in 2019. It features a 7 touch screen display with Touch 7 electronic control, supports edging thickness from 0.4 to 3 mm, and handles panel thicknesses from 8 to 60 mm. The machine offers a feed speed of 12-14 m/min and includes a hot air edge banding system. Contact us for more information.

This ABB IRB 1200-7/0.9 Omicore robot arm was manufactured in 2025. It features a reach of 901 mm, supports a payload of 7 kg, and operates efficiently with a power consumption of just 0.38 kW. Its compact footprint (210 × 210 mm) and weight of 54 kg make it ideal for varied applications. Contact us for more information about this machine.

OMEGON Freesbank LxWxH = +/- 1500x 1500 x 2350 mm Table = 1150 x 260 mm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

turning diameter: 80 mm turning length: 800 mm control: OSP-U100L total power requirement: 22 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.