136,955 used machines on RESALE, but how to find them? Machine Search
1 used: Internal cylindrical grinding machine • Manufacturer: OVERBECK, Herborn • Model: 250 I-HA • Factory No.: 261991 • Year of construction: 1971 • Clamping diameter: max. 140 mm • Grindable bore length: max. approx. 150 mm • Grindable bore diameter: max. approx. 0.8-80 mm Accessories: without internal grinding spindle without drive motor for internal grinding spindles Deflection pulleys for spindle drive available (Machine was installed by the previous owner with a pneumatic spindle operated) Flat grinding device, can be swivelled in by hand Coolant tank with pump
Hedinair Oven 2 door opening 4 shelves 8 Vacuum ports Specification Power : 3phase 415V Kilowatts : 47.6 Amps: 66.5 Internal Dimensions: 1830D x 1900W x 1830 H External Dimensions: 2090D x 2150W x 2190H Air Circulation: 2 off 1.5kW Axial Fan motors direct connection to fan blades internal. Bleed Air & exhaust 1 off bifurcated Fan. Safety: 2 Explosion to rear of oven. Heat Control 1 Eurotherm 3508 segment Programable controller with comms. Overtemperature: 1 Eurotherm Policemen unit
thickness of jaw: 127 mm clamping width: 0 - 208 in 3 Stufen mm clamping capacity: 4000 kg total power requirement: manuell kW weight of the machine ca.: 52 kg dimensions of the machine ca.: 670 x 151 ( L x H ) mm Furnishing: - hydraulic machine vice - Robust structure for milling, drilling and grinding - Vice body made of high quality cast iron - Guide surfaces hardened and ground - Jaws hardened, ground and exchangeable - Protected spindle - Booster system, little effort required, high pressure when clamping - Wide clamping range thanks to locking bolts with different hole spacings - With turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter of brush: Ø 250 mm width of brush: 40.0 mm turning speed range: 2850 U/min voltage: 400 Volt total power requirement: 1.3 / 1.8 kW weight of the machine ca.: 36.0 kg dimensions of the machine ca.: 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We are offering for sale a Robotic 3D welding station consisting of a welding robot and two rotary tables. Manufacturer: Gernert Schweißtechnik Model: OTC DR 4200L Year of Manufacture: 2001 Find more here - .ucymachines/ Contact us at - sales@ucymachines
A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible.
Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 600 kg,
Osai Neomark 400 Nd-YAG Laser Marking Machine Labeling and marking system particularly suitable for high production volumes and printed circuit boards with high packing density. Due to the large working area and the resulting elimination of traversing movements, high-resolution and precise marking is possible, saving up to 60% writing time compared to conventional systems. Manufacturer: Osai Type: Marking Laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Volt: 230 V Weight: 1300 kg Laser has been completely rebuilt Engine of Beamexpander renewed All hoses for cooling new More items - new and used - can be found in our shop! International shipping costs on request!
Thread rolling machine ORT RP18 B 2-roll, overhauled, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2
This 3-axis OMAX MAXIEM 2030 30 HP AJet was manufactured in 2018, featuring a CNC Waterjet Cutting System with a 5-axis cutting capability. It includes a robust 30 HP pump, MAXJET® 5i cutting head, and a cutting envelope of 3,061 mm by 2,019 mm. Ideal for high-precision applications, it supports a maximum material load of 1,465 kg/m². Consider the opportunity to buy this OMAX MAXIEM 2030 waterjet cutting machine. Contact us for more information about this machine.
Used fluidised bed dryer mady by Bühler, model OTWG-280, new 1995. The dryer consists of a blower, piping. All elements are made of acid-resistant sheet metal, the blower is resistant to high temperatures. The whole set is manufactured by Buhler. Technical data: - Weight 1750 kg - Content m³: 6 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.
OKUMA Euro Center V50, built in 2004 Control: OSP-10M Travel: X-1020 Y-510 Z-525 Table load 680kg Clamping area 1200x510 Tool changer 20-fold
Stock number: 3774 PROFILE BENDING MACHINE Manufacturer: KUMLA - ROUNDO, Type: Z-30 Machines NO.: 5017, Year of manufacture: 1990 Specifications: Shaft dia. 90 mm Round steel 60 mm Flat steel 200 x 30 Special roll mm Frame steel upright 100 x 20 mm Angle steel 90 x 90 x 9 mm Speed 7.5 m/min Upper roller 280 mm Ø Load by steel 40 Kg/mm2 16 cm3 Square steel 55 x 55 mm Total power 4 kW Hydraulic. 3-reels. Horizontal/Vertical Accessories: Digital Various matrices. Length: 1250 mm, Height: 1550 mm, Width: 1100 mm, Weight: 2100 kg
Specifications: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Wheel spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Tool holder inside ISO No. 50 DIN 2079 Tool holder outside ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds infinitely variable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Step Jump 1:2 Constant power range 160 rpm. Max. torque on the milling spindle 2,000 Nm Milling feed in the x direction infinitely variable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Adjustment speed in the y- and z- direction infinitely variable from 20-500 mm/min. Rapid traverse for y- and z-axis 1,00 ...
Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China.
A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible.
0: 4 x 180 kg Mixing ratio: . 0 fertility: . 0 4x 180 KG The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 28 mm throat: 200 mm bore stroke: 105 mm table surface area: 360x340 mm Distance spindle/table max.: 540 mm turning speed range - stepless: 120-3000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Horizontal turning machine manufactured in 2022. This Okuma GENOS L2000-e features a maximum turning diameter of 220 mm and a turning length of 500 mm. It is equipped with a spindle power of 15 kW and a spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L2000-e machine we have for sale. Contact us for further details.
Heidelberg OHT A4 size Original Heidelberg Hotfoilsystem
This 4-axis Okuma LB200-MW was manufactured in 2006. It features a tool turret with 12 positions and driven tools, providing versatility for various machining tasks. The machine has a spindle bore of approximately 42 mm and includes optional equipment such as a chip conveyor and coolant tray. If you are looking to get high-quality turning capabilities, consider the Okuma LB200-MW horizontal turning machine we have for sale. Contact us for further details.
BALZERS LTE 020 – Thermally controlled sample preparation station ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy/ • Digital display unit with 4 channels (B1-B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate control for mains & lamp • Power supply: 220 V Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!
CNC Prima Power Laser Cutting & Welding Machine TYPE: Optimo 2545 Basic: X= 4,500mm, Y= 2,500mm, Z= 1,020mm Length of the shaker (per PC): 4000 mm Width 2250mm/ Duty width: 3000mm Height: < 400 mm Process path (with coupled movement): 10,000 mm Loading capacity: 600 kg/m2 Max Speed: 0.5m/s Max acceleration: 0.5m/s2 Max kickback:
Manufacturer: OspreyFrank Model: iSteam iS18 Type: Dry Steam Cleaner Vapor pressure: 8 bar Steam temperature: approx. 180 °C Power: 3500 W Voltage: 230 V Condition: used
Gastronorm, HACCP, 600/400, large quantities
Thermo pens, new and used insulated boxes, cooling and freezer boxes, warming boxes, HACCP, with AKKus, 600/400
An HPLC separation column YMC for the analysis and purification of chemical substances in liquid samples is available. Phase: C18, particle sizes (analytical): 3µm/5µm, particle sizes (preparative): 10µm/15µm/20µm/50µm, pore size: 12nm, surface area: approx. 330m²/g, carbon content: 14%, pH range: 2–7.5, max. operating pressure: 200bar. An on-site inspection is possible.
material width:300 mm coil weight:0,5 t coil internal diameter:270 - 360 mm coil external diameter:1000 mm weight:0,3 t dimensions (WxDxH):1,5 x 1,2 x 1,4 m
CNC bar-fed lathe, year 2005, CNC OSP U100L. Used machine. More info & price on IndustrialBuyer.
CNC bar-fed lathe, year 2008, CNC OSP P200L. Used machine. More info & price on IndustrialBuyer.
A CNC lathe Okuma Soarer L270E is offered. Turning length: 500mm, turning diameter over bed: 530mm, max. spindle speed: 4200rpm, machine dimensions X/Y/Z: approx. 2800mm/1850mm/2000mm, weight: approx. 3700kg, control: OSP-U10L. Functional, spindle may need to be replaced. An on-site inspection is possible by appointment.
hollow: 4000 m3/h volt: 400 V Hz: 50 KW: 3 weight: 260 kg Electric air purifier The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 10000 kg weight: 10 kg with power supply and remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
halbautomatische korpusklemme für möbel modell ORMAMACCHINE PN 30 gebrauchte maschine Technische Daten : Manuelle Beladung maximale Nutzmaße mm.2200 x 600 x 1200 mindestnutzmaße mm.250 x 600 x 280 motorisierter horizontaler Querträger manuell verschiebbare vertikaltraverse n.6 vertikale zylinder n.4 horizontale zylinder Zylinderhub mm.70 installierte Leistung kW 0,30 gesamtmaße mm.3000 x 800 x 2100 h Gewicht kg 1200
SPECIFICATIONS: Work table size: 1000 x 310 mm Working depth: 130 mm Longitudinal stroke of the work table: 400 mm Transverse stroke of the work table: 150 mm Installed power: 2.95 kW EQUIPMENT: 02 Workpiece stop guides Accessories
pressure: 60 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 255 mm stroke: 165 mm dayligth: 475 mm working feed: 9,8 mm/sec return speed: 117 mm/sec ajustment speed: 150 mm/sec total power requirement: 5,5 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: 2300 x 1500 x 2470 mm Equipment: - DELEM DA65 CNC control - Electric backgauge (X-axis), 600 mm - Hydraulic upper tool clamping - Front light barrier - Side and rear protective grilles - Manually adjustable stop bar, foldable (R+Z-axis) - Upper tool - 2x support arms - Machine feet - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Komptech Multistar ONE Category: Star Screen Specification: Serial Number: 7322 Year of Make: 2021 Power: 80kW Max. flow rate: 250 m3/h Weight: 24 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: Machine was reconditioned and equipped with new screen decks.
Printing line with Oce Variostream model 7170, serial number 37248 and Lasermax rewinder model RW 100. All in production ready condition and still under power.
Paint Mixer Olbrich RM 501; cleaned and tested; suitable for 0.5 to 10kg cans. Ink mixer Olbrich RM 501; cleaned and checked; used for 0,5 till 10kg cans.
chamfer lenght: Gesamt ca. 1750 mm Packing: ca. 1900 x 200 mm Shipping weight: 550 kg 7-piece bending tool Individual lengths approx. 100 / 155 / 180 / 245 / 255 / 300/ 510 Profile approx. 20 x 20 mm Height approx. 145 ( 165 ) mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.
Manufacturer: Orbotech Model: Ultra Discovery VM Year of Manufacture: 2011 Ultra Discovery VM delivers simple, intelligent, and powerful AOI performance with 10 µm line/space inspection capabilities for FC-BGA, PBGA, CSP, and COF production. Delivering super clear images essential for capturing the finest defects, the system achieves outstanding AOI results with minimal effort or training, even on complicated panels. Most of the manufacturer’s valuable time on the system is spent inspecting panels. Logic false calls are virtually eliminated and overall false calls are minimized, saving precious verification time. Benefits - High throughput and superior detection with a minimal number of false calls - Especially designed for inspection of the finest lines down to 10 µm - Quick setup even for the most complicated jobs for higher productivity - Automation ready - Very high uptime ...
maximum number of results exceeded
please refine your search
